Secret was populating a generated kube as `null`. Add omitempty
so that when the volume source is not a secret, we do not print unnecessary info
resolves#15156
Signed-off-by: Charlie Doern <cdoern@redhat.com>
If a pod is created without net sharing, allow adding
separate ports for each container to the kube yaml
and also set the pod level hostname correctly if the
uts namespace is not being shared.
Add a warning if the default namespace sharing options
have been modified by the user.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Two for this error:
invalid indirect of pod.Spec.DNSConfig.Options[0]
...and one for a gofmt error (spaces).
Signed-off-by: Ed Santiago <santiago@redhat.com>
This is a very late followup to my ginkgo-improving work of 2021.
It has been stuck since December because it requires gomega 1.17,
which we've just enabled.
This commit is simply a copy-paste of a command I saved in
my TODO list many months ago:
sed -i -e 's/Expect(\([^ ]\+\)\.\([a-zA-Z0-9]\+\))\.To(Equal(/Expect(\1).To(HaveField(\"\2\", /' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is a lot of unneeded code, k8s is the by far the biggest
dependency in podman. We should remove as much as possible so that we
only have the stuff left that we use.
This is just a quick skim over the code which removes a lot of the
generated code and many packages that are now unused.
I know that this will be impossible to properly review. I will try to
make smaller changes in follow up work.
Right now this reduces about 8 MB in binary size!!!
[NO NEW TESTS NEEDED] Hopefully existing tests will catch any problems.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We only need a small part of the k8s dependencies but they are the
biggest dependencies in podman by far. Moving them into podman allows us
to remove the unnecessary parts.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
the logic is: if the process env vars key exists in podman default or in image defined, and the value is equal, skip the env var key.
the typo make it compare to itself -_-
so, here comes the simple fixup.
Signed-off-by: 荒野無燈 <ttys3.rust@gmail.com>
Write a BeValidJSON() matcher, and replace IsJSONOutputValid():
sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go
(Plus a few manual tweaks)
Signed-off-by: Ed Santiago <santiago@redhat.com>
via: sed -i -e 's/Expect(StringInSlice(\(.*\), \(.*\))).To(BeTrue())/Expect(\2)\.To(ContainElement(\1))/' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
When generating kube of a container, the podname and container name in
the yaml are identical. This offends rules in podman where pods and
containers cannot have the same name. We now append _pod to the
podname to avoid that collision.
Signed-off-by: Brent Baude <bbaude@redhat.com>
If podman uses Workdir="/" or the workdir specified in the image, it
should not add it to the yaml.
If Podman find environment variables in the image, they should not
get added to the yaml.
If the container or pod do not have changes to SELinux we should not
print seLinuxOpt{}
If the container or pod do not change any dns options the yaml should
not have a dnsOption={}
If the container is not privileged it should not have privileged=false
in the yaml.
Fixes: https://github.com/containers/podman/issues/11995
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When the targetPort is not defined, it is supposed to
be set to the port value according to the k8s docs.
Add tests for targetPort.
Update tests to be able to check the Service yaml that
is generated.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
As the default protocol in k8s is TCP, don't add it
to the generate yaml when using protocol.
Add UDP to the protocol of the generated yaml when udp
is being used.
Add tests for this as well.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
If no entrypoint or command is set in the podman create
command, and the image command or entrypoint is being
used as the default, then do not add the image command or
entrypoint to the generated kube yaml.
Kubernetes knows to default to the image command and/or
entrypoint settings when not defined in the kube yaml.
Add and modify tests for this case.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Removed the inclusion of RunAsUser or RunAsGroup unless a container is run with the --user flag. When building from an image
the user will be pulled from there anyway
resolves#11914
Signed-off-by: cdoern <cdoern@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When using play kube and generate kube, we need to support if bind
mounts have selinux options. As kubernetes does not support selinux in
this way, we tuck the selinux values into a pod annotation for
generation of the kube yaml. Then on play, we check annotations to see
if a value for the mount exists and apply it.
Fixes BZ #1984081
Signed-off-by: Brent Baude <bbaude@redhat.com>
If the command came from the underlying image, then we should
not include it in the generate yaml file.
Fixes: https://github.com/containers/podman/issues/11672
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Kubernetes has a concept of init containers that run and exit before
the regular containers in a pod are started. We added init containers
to podman pods as well. This patch adds support for generating init
containers in the kube yaml when a pod we are converting had init
containers. When playing a kube yaml, it detects an init container
and creates such a container in podman accordingly.
Note, only init containers created with the init type set to "always"
will be generated as the "once" option deletes the init container after
it has run and exited. Play kube will always creates init containers
with the "always" init container type.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
In the case of generate kube the auto-update labels will be converted into kube annotations and for play kube they will be converted back to labels since that's what podman understands
Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
Fixes#5788
This commit adds support for named volumes in podman-generate-kube.
Named volumes are output in the YAML as PersistentVolumeClaims.
To avoid naming conflicts, the volume name is suffixed with "-pvc".
This commit adds a corresponding suffix for host path mounts.
Host path volumes are suffixed with "-host".
Signed-off-by: Jordan Williams <jordan@jwillikers.com>
Currently if you attempt to create a kube.yaml file off of a non running
container where the container runs as a specific User, the creation
fails because the storage container is not mounted. Podman is supposed to
read the /etc/passwd entry inside of the container but since the
container is not mounted, the c.State.Mountpoint == "". Podman
incorrectly attempts to read /etc/passwd on the host, and fails if the
specified user is not in the hosts /etc/passwd.
This PR mounts the storage container, if it was not mounted so the read
succeeds.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Do not play with capabilities for privileged containers where all
capabilities will be set implicitly.
Also, avoid the device check when running privileged since all of /dev/*
will be mounted in any case.
Fixes: #8897
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The spec of a Kube Container has a `Command` and `Args`. While both are
slices, the `Command` is the counterpart of the entrypoint of a libpod
container. Kube is also happily accepting the arguments to as following
items in the slice but it's cleaner to move those to `Args`.
Fixes: #9211
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
- When one or more containers in the Pod reports an error on an operation
report StatusConflict and report the error(s)
- jsoniter type encoding used to marshal error as string using error.Error()
- Update test framework to allow setting any flag when creating pods
- Fix test_resize() result check
Fixes#8865
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when creating kubernetes yaml from containers and pods, we should honor
any custom dns settings the user provided. in the case of generate kube,
these would be provided by --dns, --dns-search, and --dns-opt. if
multiple containers are involved in the generate, the options will be
cumulative and unique with the exception of dns-opt.
when replaying a kube file that has kubernetes dns information, we now
also add that information to the pod creation.
the options for dnspolicy is not enabled as there seemed to be no direct
correlation between kubernetes and podman.
Fixes: #9132
Signed-off-by: baude <bbaude@redhat.com>
These tests simply will not work under these conditions.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
add the ability to add multiple containers into a single k8s pod
instead of just one.
also fixed some bugs in the resulting yaml where an empty service
description was being added on error causing the k8s validation to fail.
Signed-off-by: baude <bbaude@redhat.com>
in an effort to speed up the remote testing, we should be using
lookaside storage to avoid pull images as well as importing multiple
images into the RW store.
one test was removed and added into system test by Ed in #8325
Signed-off-by: baude <bbaude@redhat.com>
this is an option that allows a user to specify whether to share PID namespace in the pod
for play kube and generate kube
associated test added
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Charlie Doern
Urvashi Mohnani
Paul Holzinger
Ed Santiago
aonoa
Valentin Rothberg
荒野無燈
Brent Baude
Daniel J Walsh
OpenShift Merge Robot
Eduardo Vega
zhangguanzhang
Jordan Williams
Jhon Honce
Milivoje Legenovic
Chris Evich
Andy Librian
Peter Hunt