A number of standard image names were lower-case, leading to
confusion in code such as:
registry := podman(... , "-n", "registry", registry, ...)
^--- variable ^---- constant
Fix a number of those to be capitalized and with _IMAGE suffix:
registry := podman(..., REGISTRY_IMAGE
Signed-off-by: Ed Santiago <santiago@redhat.com>
I am not 100% sure if this is actually causing the problem but I was
able to reproduce locally and this change fixed it there. Without the `-n`
option iptables tries to reverse lookup the ips to domain names. This is
extremely slow for unknown reasons. Given the large amount of iptables
entries due parallel test runs it will not succeed in the default 90 sec
timeout.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is a very late followup to my ginkgo-improving work of 2021.
It has been stuck since December because it requires gomega 1.17,
which we've just enabled.
This commit is simply a copy-paste of a command I saved in
my TODO list many months ago:
sed -i -e 's/Expect(\([^ ]\+\)\.\([a-zA-Z0-9]\+\))\.To(Equal(/Expect(\1).To(HaveField(\"\2\", /' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
Because /etc/hosts is shared for all containers with a shared network
namespace you should not be able to add hosts from a joined container.
Only the primary netns container can set the hosts.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a new flag to set the ipam-driver. Also adds a new ipam driver none
mode which only creates interfaces but does not assign addresses.
Fixes#13521
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We should not check if the network supports dns when we create a
container with network aliases. This could be the case for containers
created by docker-compose for example if the dnsname plugin is not
installed or the user uses a macvlan config where we do not support dns.
Fixes#12972
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e2e tests:
* remove two FIXMEs:
* one of them is expected behavior, not a FIXME
* the other is easily fixed
* File issue #12521 for a real podman-remote bug, and
update the Skip() message
system tests:
* in command-completion test, clean up stray podman-pause image
(followup to #12322, in which I missed this instance). This
removes distracting warnings from test logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
sed -i -e 's/Expect(\(.*\)\[\(\".*\"\)\])\.To(\(.*\)/Expect(\1).To(HaveKeyWithValue(\2, \3)/' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
Many ginkgo tests have been written to use this evil form:
GrepString("foo")
Expect(that to BeTrue())
...which yields horrible useless messages on failure:
false is not true
Identify those (automatically, via script) and convert to:
Expect(output to ContainSubstring("foo"))
...which yields:
"this output" does not contain substring "foo"
There are still many BeTrue()s left. This is just a start.
This is commit 1 of 2. It includes the script I used, and
all changes to *.go are those computed by the script.
Commit 2 will apply some manual fixes.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The OCICNI port format has one big problem: It does not support ranges.
So if a users forwards a range of 1k ports with podman run -p 1001-2000
we have to store each of the thousand ports individually as array element.
This bloats the db and makes the JSON encoding and decoding much slower.
In many places we already use a better port struct type which supports
ranges, e.g. `pkg/specgen` or the new network interface.
Because of this we have to do many runtime conversions between the two
port formats. If everything uses the new format we can skip the runtime
conversions.
This commit adds logic to replace all occurrences of the old format
with the new one. The database will automatically migrate the ports
to new format when the container config is read for the first time
after the update.
The `ParsePortMapping` function is `pkg/specgen/generate` has been
reworked to better work with the new format. The new logic is able
to deduplicate the given ports. This is necessary the ensure we
store them efficiently in the DB. The new code should also be more
performant than the old one.
To prove that the code is fast enough I added go benchmarks. Parsing
1 million ports took less than 0.5 seconds on my laptop.
Benchmark normalize PortMappings in specgen:
Please note that the 1 million ports are actually 20x 50k ranges
because we cannot have bigger ranges than 65535 ports.
```
$ go test -bench=. -benchmem ./pkg/specgen/generate/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/pkg/specgen/generate
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
BenchmarkParsePortMappingNoPorts-12 480821532 2.230 ns/op 0 B/op 0 allocs/op
BenchmarkParsePortMapping1-12 38972 30183 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMapping100-12 18752 60688 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMapping1k-12 3104 331719 ns/op 223840 B/op 3018 allocs/op
BenchmarkParsePortMapping10k-12 376 3122930 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMapping1m-12 3 390869926 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingReverse100-12 18940 63414 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMappingReverse1k-12 3015 362500 ns/op 223841 B/op 3018 allocs/op
BenchmarkParsePortMappingReverse10k-12 343 3318135 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMappingReverse1m-12 3 403392469 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingRange1-12 37635 28756 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange100-12 39604 28935 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1k-12 38384 29921 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange10k-12 29479 40381 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1m-12 927 1279369 ns/op 143022 B/op 164 allocs/op
PASS
ok github.com/containers/podman/v3/pkg/specgen/generate 25.492s
```
Benchmark convert old port format to new one:
```
go test -bench=. -benchmem ./libpod/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/libpod
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
Benchmark_ocicniPortsToNetTypesPortsNoPorts-12 663526126 1.663 ns/op 0 B/op 0 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1-12 7858082 141.9 ns/op 72 B/op 2 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10-12 2065347 571.0 ns/op 536 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts100-12 138478 8641 ns/op 4216 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1k-12 9414 120964 ns/op 41080 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10k-12 781 1490526 ns/op 401528 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1m-12 4 250579010 ns/op 40001656 B/op 4 allocs/op
PASS
ok github.com/containers/podman/v3/libpod 11.727s
```
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Duplicate Address Detection slows the ipv6 setup down for 1-2 seconds.
Since slirp4netns is run it is own namespace and not directly routed
we can skip this to make the ipv6 address immediately available.
We change the default to make sure the slirp tap interface gets the
correct value assigned so DAD is disabled for it.
Also make sure to change this value back to the original after slirp4netns
is ready in case users rely on this sysctl.
Fixes#11062
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
(Sorry, couldn't resist).
CI flakes have been coming down - thank you to everyone who has
been making them a priority.
This leaves a noisy subset that I've just been ignoring for months:
Running: podman ... -p 8080:something
...cannot listen on the TCP port: listen tcp4 :8080: bind: address already in use
Sometimes these are one-time errors resolved on 2nd try; sometimes
they fail three times, forcing CI user to hit Rerun. In all cases
they make noise in my flake logs, which costs me time.
My assumption is that this has to do with ginkgo running random
tests in parallel. Since many e2e tests simplemindedly use 8080,
collisions are inevitable.
Solution: simplemindedly replace 8080 with other (also arbitrarily
picked) numbers. This is imperfect -- it requires human developers
to pick a number NNNN and 'grep NNNN test/e2e/*' before adding
new tests, which I am 100% confident ain't gonna happen -- but
it's better than what we have now.
Side note: I considered writing and using a RandomAvailablePort()
helper, but that would still be racy. Plus, it would be a pain
to interpolate strings into so many places. Finally, with this
hand-tooled approach, if/when we _do_ get conflicts on port NNNN,
it should be very easy to grep for NNNN, find the offending tests
that reuse that port, and fix one of them.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The check for net=none was wrong. It just assumed when we do not create
the netns but have one set that we use the none mode. This however also
applies to a container which joins the pod netns.
To correctly check for the none mode use `config.NetMode.IsNone()`.
Fixes#11596
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a network id is used to create a container we translate it to use the
name internally for the db. The network aliases are also stored with the
network name as key so we have to also translate them for the db.
Also removed some outdated skips from the e2e tests.
Fixes#11285
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
To match Docker's behavior, in the `--net=host` case, we need to
use the host's `/etc/hosts` file, unmodified (without adding an
entry for the container). We will still respect hosts from
`--add-host` but will not make any automatic changes.
Fortuntely, this is strictly a matter of removal and refactoring
as we already base our `/etc/hosts` on the host's version - just
need to remove the code that added entries when net=host was set.
Fixes#10319
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
The initial version of libimage changed the order of layers which has
now been restored to remain backwards compatible.
Further changes:
* Fix a bug in the journald logging which requires to strip trailing
new lines from the message. The system tests did not pass due to
empty new lines. Triggered by changing the default logger to
journald in containers/common.
* Fix another bug in the journald logging which embedded the container
ID inside the message rather than the specifid field. That surfaced
in a preceeding whitespace of each log line which broke the system
tests.
* Alter the system tests to make sure that the k8s-file and the
journald logging drivers are executed.
* A number of e2e tests have been changed to force the k8s-file driver
to make them pass when running inside a root container.
* Increase the timeout in a kill test which seems to take longer now.
Reasons are unknown. Tests passed earlier and no signal-related
changes happend. It may be CI VM flake since some system tests but
other flaked.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The mtu default value is currently forced to 65520.
This let the user control it using the config key network_cmd_options,
i.e.: network_cmd_options=["mtu=9000"]
Signed-off-by: bitstrings <pino.silvaggio@gmail.com>
Make sure we pass the ip and mac address as CNI_ARGS to
the cnitool which is executed in the rootless-cni-infra
container.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The existing logic (Range > 0) always triggered, because range is
guaranteed to be at least 1 (a single port has a range of 1, a
two port range (e.g. 80-81) has a range of 2, and so on). As such
this could cause ports that had a host port assigned to them by
the user to randomly assign one instead.
Fixes#8650Fixes#8651
Signed-off-by: Matthew Heon <mheon@redhat.com>
Docker defines an option of "default" which means to
use the default network. We should support this with
the same code path as --network="".
This is important for compatibility with the Docker API.
Fixes: https://github.com/containers/podman/issues/8544
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
As described in issue #8507 this commit contains a breaking
change which is not wanted in v2.2.
We can discuss later if we want this in 3.0 or not.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We allow a container to be connected to several cni networks
but only if they are listed comma sperated. This is not intuitive
for users especially since the flag parsing allows multiple string
flags but only would take the last value. see: spf13/pflag#72
Also get rid of the extra parsing logic for pods. The invalid options
are already handled by `pkg/specgen`.
A test is added to prevent a future regression.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The --hostname and containername should always be added to containers.
Added some tests to make sure you can always ping the hostname and container
name from within the container.
Fixes: https://github.com/containers/podman/issues/8095
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
ed identified that the dnsname integration test does not use a unique
name and therefore cannot be cleaned up. this was made worse by a
improper defer statement to remove the network should the test fail.
Signed-off-by: baude <bbaude@redhat.com>
When creating a container in a pod the podname was always set as
the dns entry. This is incorrect when the container is not part
of the pods network namespace. This happend both rootful and
rootless. To fix this check if we are part of the pods network
namespace and if not use the container name as dns entry.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Detached containers and detach keys are only created with the podman run, i
exec, and start commands. We do not store the detach key sequence or the
detach flags in the database, nor does Docker. The current code was ignoreing
these fields but documenting that they can be used.
Fix podman create man page and --help output to no longer indicate that
--detach and --detach-keys works.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This does not match Docker, which does not add hostname in this
case, but it seems harmless enough.
Fixes#8095
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Ed Santiago
Paul Holzinger
Valentin Rothberg
Chris Evich
Daniel J Walsh
😎 Mostafa Emami
Lokesh Mandvekar
Brent Baude
Valentin Rothberg
Colin Bendell
Matthew Heon
Matthew Heon
Paul Holzinger
bitstrings
Giuseppe Scrivano
Luap99
OpenShift Merge Robot