If the RunAsUser, RunAsGroup, SupplementalGroups settings are not
overriden in the container security context, then take the value from
the pod security context.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Commit b58e7e7f11 was not fully rebased before merging and is now
breaking CI because commit 69c479b16e made the underlying error
visible. Using journald inside the container tests is not supported.
Fixes#14162
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
currently tags cause a panic due to an uninitialized map. Initialize the map
and add parsing to make sure we are only tagging with journald
resolves#13356
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Pulling the K8s pause image seems unnecessarily expensive to me. Let's
use the testgitest_v2s2 one which is under our control and weighs only a
couple of KB.
This cut the execution time in less than half on my machine. Since it's
network bound and I am running on fibre, I expect more significant speed
ups in slower networks.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Squash the --quiet test into another one. The test was more complex
than necessary and can easily be squashed into another one to avoid one
more expensive pull.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Once upon a time, the tests actually pulled from Docker Hub. This has
changed with the rate limits, so we can safely remove the redundant
tests to speed up CI.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Rather than assuming a filesystem path, the API service URI is recorded
in the libpod runtime configuration and then reported as requested.
Note: All schemes other than "unix" are hard-coded to report URI exists.
Fixes#12023
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Instead of using the main module we should vendor the test tools in a
different directory. That way we do not add extra dependencies to the
main module which can be problemetic for packages or other users.
This is already done in buildah so this makes us more consitent.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman system reset did not clean up machines fully, leaving some config
files, and breaking machines. Now it removes all machines files fully.
Signed-off-by: Ashley Cui <acui@redhat.com>
The default log driver is not used when using play kube
without --log-driver. The LogDriver function needs to
be called in order to use the default log driver.
fixes#13781
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Polish the push and pull benchmarks. In particular, make sure to not be
network bound during these benchmarks by running a local registry and
pushing a local image that can later on be pulled.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
since the network config is a string map, json.unmarshal does not recognize
the config and spec as the same entity, need to map this option manually
resolves#13713
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
We can vendor the test dependencies such as go-md2man, git-validation
and goimports. This allows us to always install the same version as
specified in go.mod. Also we do not rely on a network connection for
this.
The advantage with this method is that dependabot will also update the
dependencies for us and we do not have to hardcode versions in the
Makefile.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When a container is run in the host network namespace we have to keep
the same resolv.conf content and not use the systemd-resolve detection
logic.
But also make sure we still allow --dns options.
Fixes#14055
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The files /etc/hosts, /etc/hostname and /etc/resolv.conf should always
be owned by the root user in the container. This worked correct for
/etc/hostname and /etc/hosts but not for /etc/resolv.conf.
A container run with --userns keep-id would have the reolv.conf file
owned by the current container user which is wrong.
Consolidate some common code in a new helper function to make the code more
cleaner.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test has been broken since it was added 4 years ago. Instead of
using hardcoded paths we should use tmp files.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Two for this error:
invalid indirect of pod.Spec.DNSConfig.Options[0]
...and one for a gofmt error (spaces).
Signed-off-by: Ed Santiago <santiago@redhat.com>
This is a very late followup to my ginkgo-improving work of 2021.
It has been stuck since December because it requires gomega 1.17,
which we've just enabled.
This commit is simply a copy-paste of a command I saved in
my TODO list many months ago:
sed -i -e 's/Expect(\([^ ]\+\)\.\([a-zA-Z0-9]\+\))\.To(Equal(/Expect(\1).To(HaveField(\"\2\", /' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
add a new option to completely disable xfs quota usage for a volume.
xfs quota set on a volume, even just for tracking disk usage, can
cause weird errors if the volume is later re-used by a container with
a different quota projid. More specifically, link(2) and rename(2)
might fail with EXDEV if the source file has a projid that is
different from the parent directory.
To prevent such kind of issues, the volume should be created
beforehand with `podman volume create -o o=noquota $ID`
Closes: https://github.com/containers/podman/issues/14049
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
I think we forgot to bump the version in the main branch. It should be
v4.1.0-dev now.
Also set the min api version to 4.0.0 as on the podman 4.0 branch.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We need to use the host network when it is set in the config and
--network was not used.
This regression was added in 3e9af2029f.
Fixes#14015
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We should not exclude contianers by name. If a users has a container
with the name "inf" it is currently skipped. This is wrong. The k8s yaml
does not contain infra containers so we do not have to skip them.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Changes as of 2022-04-21:
- apply-podman-deltas: minor cleanup
- buildah-tests.diff: deal with:
. buildah #3894 (the registry one), which affected helpers.bash in
a way that resulted in conflicts here; and
. buildah #3917 (etchosts), which caused offset-only diffs
with no conflicts
- Reevaluate the bud skip list, and reenable some tests that
seems to be passing now under podman:
. bud with specified context ...
. two tests that require a local registry (which buildah now runs)
. bud with --cgroup-parent
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add more benchmarks for the most common and performance-critical image
commands. Benchmarks for `podman build` should go into a separate
section.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
[skip ci]
While chasing a flake, I discovered that our alpine_nginx
image is broken: it returns 404 on all requests. We never
caught this because--surprise!--curl exits 0 even when
server returns 4xx/5xx status.
Let's be strict: add -f (--fail) option to all invocations
of curl.
And, although I couldn't identify the root cause of the
flake (in "run two containers with the same IP" test),
I can at least fix the broken wait-for-nginx loop, bump
up the number of retries, and improve diagnostics on
failure. And add a strict error-message check.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This reverts commit cc3790f332.
We can't change rootful to rootfull because `rootful` is written into the machine config. Changing this will break json unmarshalling, which will break existing machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
Do not use a list of statuses outside of libpod to validate container
statuses. Removing status was never added to the list.
Fixes: https://github.com/containers/podman/issues/13986
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Starting the podman service in debug-mode causes aardvark to run in
debug mode. This does unexpected things with file-descriptors leading
to a test-hang. Thanks to @Luap99 for the fix.
Signed-off-by: Chris Evich <cevich@redhat.com>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Because /etc/hosts is shared for all containers with a shared network
namespace you should not be able to add hosts from a joined container.
Only the primary netns container can set the hosts.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we connect or disconnect from a network we also have to update
/etc/hosts to ensure we only have valid entries in there.
This also fixes problems with docker-compose since this makes use of
network connect/disconnect.
Fixes#12533
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we lookup the hostname for a given container we have to check if
the container is joined to another utsns and use this hostname then
instead.
This fixes a problem where the `hostname` command would use the correct
name but /etc/hostname would contain a different name.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the new logic from c/common to create the hosts file. This will help
to better allign the hosts files between buildah and podman.
Also this fixes several bugs:
- remove host entries when container is stopped and has a netNsCtr
- add entries for containers in a pod
- do not duplicate entries in the hosts file
- use the correct slirp ip when an userns is used
Features:
- configure host.containers.internal entry in containers.conf
- configure base hosts file in containers.conf
Fixes#12003Fixes#13224
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Following commit ensures that csv escaping is supported while using
inline `--mount=type=......` flag with `podman run` by using
`encoding/csv` to parse options instead of performing a `split.String(`
by `comma`.
Closes: https://github.com/containers/podman/issues/13922
Signed-off-by: Aditya R <arajan@redhat.com>
When run on an F36 host using netavark/aardvark-dns, for whatever
underlying reason most checkpoint/restore tests are emitting an error
similar to:
`criu: Symbol `__rseq_offset' has different size in shared object,
consider re-linking`
This extraneous output is causing the basic checkpoint system test to
fail. Since, all other testing of checkpoint/restore feature is
passing (also with the extraneous message) loosen the system test
sensitivity to match.
Signed-off-by: Chris Evich <cevich@redhat.com>
We are inconsistent on the name, we should stick with rootfull.
[NO NEW TESTS NEEDED] Existing tests should handle this and no tests for
machines exists yet.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
From a security point of view, it would be nice to be able to map a
rootless usernamespace that does not use your own UID within the
container.
This would add protection against a hostile process escapping the
container and reading content in your homedir.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
It seems this breaks older version of `podman-remote` users hence it
looks like this patch would be a better candidate for podman `5.0`
Problem
* Client with `4.0` cannot interact with a server of `4.1`
Plan this patch for podman `5.0`
This reverts commit 0cebd158b6.
Signed-off-by: Aditya R <arajan@redhat.com>
On F36 / podman 4, at the time of this commit there is no
`/etc/containers/storage.conf` installed by default. Since the
test volume-mounts this file into the container, it was failing. Fix
this by using a conditional volume-mount based on the file existing (or
not).
Signed-off-by: Chris Evich <cevich@redhat.com>
When this option was added to the e2e tests, there was no CI Automation
support for running remote tests w/ netavark. When added, many
e2e test errors/failures are generated due to this option not being
valid for the remote client. Fix this in the tests by conditionally
adding the option if the test is running the remote client.
Signed-off-by: Chris Evich <cevich@redhat.com>
Problem: the system test 'is()' checker was poorly thought out.
For example, there is no way to check for inequality or for
absence of a substring.
Solution, step 1: introduce new assert(), copied almost verbatim
from buildah, where it has been successful in addressing the
gaps in is().
The logical next step is to search the tests for 'die' and
for 'run', looking for negative assertions which we can
replace with assert(). There were a lot, and in the process
I found a number of ugly bugs in the tests themselves. I've
taken the liberty of fixing these.
Important note: at this time we have both assert() and is().
Replacing all instances of is() would be impossible to review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
OpenShift Merge Robot
Giuseppe Scrivano
Paul Holzinger
cdoern
Valentin Rothberg
Daniel J Walsh
Ashley Cui
Niall Crowe
Jhon Honce
Ed Santiago
Chris Evich
aonoa
Aditya R