ensure the volume paths are resolved in the mountpoint scope.
Otherwise we might end up using host paths.
Closes: https://github.com/containers/libpod/issues/1608
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
If someone runs podman as a user (uid) that is not defined in the container
we want generate a passwd file so that getpwuid() will work inside of container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Adds a few missing things from writeStringToRundir() to the new
resolv.conf function, specifically relabelling and returning a
path compatible with rootless podman
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
The vendoring issues with libnetwork were significant (it was
dragging in massive amounts of code) and were just not worth
spending the time to work through. Highly unlikely we'll ever end
up needing to update this code, so move it directly into pkg/ so
we don't need to vendor libnetwork. Make a few small changes to
remove the need for the remainder of libnetwork.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Libnetwork provides a well-tested package for generating
resolv.conf from the host's that has some features our current
implementation does not. Swap to using their code and remove our
built-in implementation.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
runc uses CRIU to support checkpoint and restore of containers. This
brings an initial checkpoint/restore implementation to podman.
None of the additional runc flags are yet supported and container
migration optimization (pre-copy/post-copy) is also left for the future.
The current status is that it is possible to checkpoint and restore a
container. I am testing on RHEL-7.x and as the combination of RHEL-7 and
CRIU has seccomp troubles I have to create the container without
seccomp.
With the following steps I am able to checkpoint and restore a
container:
# podman run --security-opt="seccomp=unconfined" -d registry.fedoraproject.org/f27/httpd
# curl -I 10.22.0.78:8080
HTTP/1.1 403 Forbidden # <-- this is actually a good answer
# podman container checkpoint <container>
# curl -I 10.22.0.78:8080
curl: (7) Failed connect to 10.22.0.78:8080; No route to host
# podman container restore <container>
# curl -I 10.22.0.78:8080
HTTP/1.1 403 Forbidden
I am using CRIU, runc and conmon from git. All required changes for
checkpoint/restore support in podman have been merged in the
corresponding projects.
To have the same IP address in the restored container as before
checkpointing, CNI is told which IP address to use.
If the saved network configuration cannot be found during restore, the
container is restored with a new IP address.
For CRIU to restore established TCP connections the IP address of the
network namespace used for restore needs to be the same. For TCP
connections in the listening state the IP address can change.
During restore only one network interface with one IP address is handled
correctly. Support to restore containers with more advanced network
configuration will be implemented later.
v2:
* comment typo
* print debug messages during cleanup of restore files
* use createContainer() instead of createOCIContainer()
* introduce helper CheckpointPath()
* do not try to restore a container that is paused
* use existing helper functions for cleanup
* restructure code flow for better readability
* do not try to restore if checkpoint/inventory.img is missing
* git add checkpoint.go restore.go
v3:
* move checkpoint/restore under 'podman container'
v4:
* incorporated changes from latest reviews
Signed-off-by: Adrian Reber <areber@redhat.com>
unfortunately the papr CI system cannot test ubuntu as a VM; therefore,
this PR still keeps travis. but it does include fixes that will be required
for running on modern versions of ubuntu.
Signed-off-by: baude <bbaude@redhat.com>
The same relabel is already done in writeStringToRundir so we don't
need to do it twice. The version in writeStringToRundir takes into
account the correct file path when using user namespaces.
Closes: https://github.com/containers/libpod/pull/1584
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We call cleanup() (which calls cleanupRuntime()) as part of
removing containers, after the container has already been removed
from the database. cleanupRuntime() tries to update and save the
state, which obviously fails if the container no longer exists.
Make the save() conditional on the container not being in the
process of being removed.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
To work better with Kata containers, we need to delete() from the
OCI runtime as a part of cleanup, to ensure resources aren't
retained longer than they need to be.
To enable this, we need to add a new state to containers,
ContainerStateExited. Containers transition from
ContainerStateStopped to ContainerStateExited via cleanupRuntime
which is invoked as part of cleanup(). A container in the Exited
state is identical to Stopped, except it has been removed from
the OCI runtime and thus will be handled differently when
initializing the container.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Runc disables systemd cgroup support when build statically, so
don't tell people to do that now that we're defaulting to systemd
for cgroup management.
Also, fix some error messages to use the proper ID() call for
containers.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
ALso cleanup files section or podman man page
Add description of policy.json
Sort alphabetically.
Add more info on oci hooks
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1487
Approved by: umohnani8
Prevent a runc error that doesn't like symlinks as part
of the rootfs.
Closes: https://github.com/containers/libpod/issues/1389
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1390
Approved by: rhatdan
In some cases, /etc/resolv.conf can be a symlink to something like
/run/systemd/resolve/resolv.conf. We currently check for that file
and if it exists, use it instead of /etc/resolv.conf. However, we are
no seeing cases where the systemd resolv.conf exists but /etc/resolv.conf
is NOT a symlink.
Therefore, we now obtain the endpoint for /etc/resolv.conf whether it is a
symlink or not. That endpoint is now what is read to generate a container's
resolv.conf.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1368
Approved by: rhatdan
A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
Need to get some small changes into libpod to pull back into buildah
to complete buildah transition.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1270
Approved by: mheon
Currently we add mounts from images, volumes and internal.
We can accidently over mount an existing mount. This patch sorts the mounts
to make sure a parent directory is always mounted before its content.
Had to change the default propagation on image volume mounts from shared
to private to stop mount points from leaking out of the container.
Also switched from using some docker/docker/pkg to container/storage/pkg
to remove some dependencies on Docker.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1243
Approved by: mheon
podman umount will currently only unmount file system if not other
process is using it, otherwise the umount decrements the container
storage to indicate that the caller is no longer using the mount
point, once the count gets to 0, the file system is actually unmounted.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1184
Approved by: TomSweeneyRedHat
refresh() is the only major command we had that did not perform a
sync before running, and thus was not guaranteed to pick up a
good copy of the state. Fix this by updating the state before a
refresh().
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1186
Approved by: rhatdan
Moved contents of RestartWithTimeout to restartWithTimeout in container_internal to be able to call restart without locking in function.
Refactored startNode to be able to either start or restart a node.
Built pod Restart() with new startNode with refresh true.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1152
Approved by: rhatdan
Currently we unmount storage that is still in use.
We should not be unmounting storeage that we mounted
via a different command or by podman mount. This
change relies on containers/storage to umount keep track of
how many times the storage was mounted before really unmounting
it from the system.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
vendor in containers/storage
vendor in containers/image
vendor in projectatomic/buildah
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1114
Approved by: mheon
Use this to supplement exit codes returned from containers, to
make sure we know when exit codes are invalid (as the container
has not yet exited)
Signed-off-by: Matthew Heon <mheon@redhat.com>
This is a refresh of Dan William's PR #974 with a rebase and proper
vendoring of ocicni and containernetworking/cni. It adds the ability
to define multiple networks as so:
podman run --network=net1,net2,foobar ...
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1082
Approved by: baude
podman now supports --volumes-from flag, which allows users
to add all the volumes an existing container has to a new one.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #931
Approved by: mheon
Originally, it seemed like a good idea to place Conmon and the
container it managed under a shared CGroup, so we could manage
the two together. It's become increasingly clear that this is a
potential performance sore point, gains us little practical
benefit in managing Conmon, and adds extra steps to container
cleanup that interfere with Conmon postrun hooks.
Revert back to a shared CGroup for conmon processes under the
CGroup parent. This will retain per-pod conmon CGroups as well if
the pod is set to create a CGroup and act as CGroup parent for
its containers.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1051
Approved by: umohnani8
this should represent the last major changes to get darwin to **compile**. again,
the purpose here is to get darwin to compile so that we can eventually implement a
ci task that would protect against regressions for darwin compilation.
i have left the manual darwin compilation largely static still and in fact now only
interject (manually) two build tags to assist with the build. trevor king has great
ideas on how to make this better and i will defer final implementation of those
to him.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1047
Approved by: rhatdan
The destination path of the built-in volume was not being created
but a relabel was being attempted on it, this was causing issues
with all images that have built-in volumes.
This patch fixes that and ensures the destination volume path
is created.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1026
Approved by: mheon
When we run containers in detach mode, nothing cleans up the network stack or
the mount points. This patch will tell conmon to execute the cleanup code when
the container exits.
It can also be called to attempt to cleanup previously running containers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #942
Approved by: mheon
Catching up with opencontainers/runtime-tools@84a62c6a (generate: Move
Generator.spec to Generator.Config, 2016-11-06, #266, v0.6.0), now
that we've bumped runtime-tools in f6c0fc1a (Vendor in latest
runtime-tools, 2018-06-26, #1007).
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #1008
Approved by: mheon
When running podman as non root user always create an userNS and let
the OCI runtime use it.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #936
Approved by: rhatdan
The Refresh() function is used to reset a container's state after
a database format change to state is made that requires migration
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #981
Approved by: baude
Signed-off-by: Marco Vedovati <mvedovati@suse.com>
- Set srcPath permissions so that the container user can R/W it.
- Fix uninitialized spec.Mount when restarting a container.
- Check for srcPath instead of volumePath existence when setting up a
volume mount point for a container.
- Set the overlay volumePath with the same owner and permissions as
srcPath to allow proper access by the container user.
Closes#844Closes: #951
Approved by: rhatdan
Ensure we can identify what hook is running so we can tell which
are erroring.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #960
Approved by: rhatdan
The containernetworking/plugins ns package does not support
unmounting and removing namespaces that were opened by another
process. Work around this by doing it ourself.
Closes: #858
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #949
Approved by: rhatdan
Attempt to cleanup as much of the container as possible, even if one
of the cleanup stages fails.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #895
Approved by: mheon
Currently we are dropping the command entry from the create
line and using the image Cmd. This change will only use the
image Cmd if the user did not specify a Cmd.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #823
Approved by: umohnani8
Instead of manually calling the individual functions that cleanup
uses to tear down a container's resources, just call the cleanup
function to make sure that cleanup only needs to happen in one
place.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #790
Approved by: rhatdan
When we're given a numeric --user value, default to GID 0 if the numeric
ID doesn't correspond to a user entry in /etc/passwd that can provide us
with the user's primary group ID.
Make sure that GetAdditionalGroupsForUser() returns wrapped errors.
Also test various user:group forms.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Closes: #728
Approved by: mheon
Allow containers that no longer exist in storage to be evicted
from the state instead of erroring.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #764
Approved by: rhatdan
And add an argument to WithHooksDir to set it.
If the hook dir doesn't exist, the new hooks package considers that a
fatal error. When a podman caller sets
--hooks-dir-path=/some/typoed/directory, a fatal error is more helpful
than silently not loading any hooks. However, callers who call podman
without setting --hooks-dir-path may not need hooks at all. We don't
want to pester those callers with not-exist errors. With this commit,
we:
* Assume the caller knows what they're doing if they set
--hooks-dir-path and set HooksDirNotExistFatal.
* If the caller does not explicitly set --hooks-dir-path, assume they
won't mind if the hook directory is missing and set
HooksDirNotExistFatal false.
We also considered checking for the directory's existence in the code
calling WithHooksDir or from within WithHooksDir, but checks there
would race with the underlying ioutil.ReadDir in the hooks package.
By pushing the warn/error decision down into libpod's implementation,
we avoid a racy "do we expect this to work once libpod gets to it?"
pre-check.
I've also added a check to error if WithHooksDir is called with an
empty-string argument, because we haven't defined the semantics of
that (is it clearing a previous value? Is it effectively the same as
the current directory?). I agree with Matthew that a separate
WithNoHooks, or a *string argument to WithHooks, or some such would be
a better API for clearing previous values [1]. But for now, I'm just
erroring out to fail early for callers who might otherwise be
surprised that libpod ignores empty-string HooksDir.
[1]: https://github.com/projectatomic/libpod/pull/686#issuecomment-385119370
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #686
Approved by: mheon
This shifts the matching logic out of libpod/container_internal and
into the hook package, where we can reuse it after vendoring into
CRI-O. It also adds unit tests with almost-complete coverage. Now
libpod is even more isolated from the hook internals, which makes it
fairly straightforward to bump the hook config file to 1.0.0. I've
dubbed the old format 0.1.0, although it doesn't specify an explicit
version. Motivation for some of my changes with 1.0.0:
* Add an explicit version field. This will make any future JSON
structure migrations more straightforward by avoiding the need for
version-guessing heuristics.
* Collect the matching properties in a new When sub-structure. This
makes the root Hook structure easier to understand, because you
don't have to read over all the matching properties when wrapping
your head around Hook.
* Replace the old 'hook' and 'arguments' with a direct embedding of
the runtime-spec's hook structure. This provides access to
additional upstream properties (args[0], env, and timeout) and
avoids the complication of a CRI-O-specific analog structure.
* Add a 'when.always' property. You can usually accomplish this
effect in another way (e.g. when.commands = [".*"]), but having a
boolean explicitly for this use-case makes for easier reading and
writing.
* Replace the previous annotations array with an annotations map. The
0.1.0 approach matched only the values regardless of key, and that
seems unreliable.
* Replace 'cmds' with 'when.commands', because while there are a few
ways to abbreviate "commands", there's only one way to write it out
in full ;). This gives folks one less thing to remember when
writing hook JSON.
* Replace the old "inject if any specified condition matches" with
"inject if all specified conditions match". This allows for more
precise targeting. Users that need more generous targeting can
recover the previous behavior by creating a separate 1.0.0 hook file
for each specified 0.1.0 condition.
I've added doc-compat support for the various pluralizations of the
0.1.0 properties. Previously, the docs and code were not in
agreement. More on this particular facet in [1].
I've updated the docs to point out that the annotations being matched
are the OCI config annotations. This differs from CRI-O, where the
annotations used are the Kubernetes-supplied annotations [2,3]. For
example, io.kubernetes.cri-o.Volumes [4] is part of CRI-O's runtime
config annotations [5], but not part of the Kubernetes-supplied
annotations CRI-O uses for matching hooks.
The Monitor method supports the CRI-O use-case [6]. podman doesn't
need it directly, but CRI-O will need it when we vendor this package
there.
I've used nvidia-container-runtime-hook for the annotation examples
because Dan mentioned the Nvidia folks as the motivation behind
annotation matching. The environment variables are documented in [7].
The 0.1.0 hook config, which does not allow for environment variables,
only works because runc currently leaks the host environment into the
hooks [8]. I haven't been able to find documentation for their usual
annotation trigger or hook-install path, so I'm just guessing there.
[1]: https://github.com/kubernetes-incubator/cri-o/pull/1235
[2]: https://github.com/kubernetes-incubator/cri-o/blob/v1.10.0/server/container_create.go#L760
[3]: https://github.com/kubernetes-incubator/cri-o/blob/v1.10.0/server/container_create.go#L772
[4]: https://github.com/kubernetes-incubator/cri-o/blob/v1.10.0/pkg/annotations/annotations.go#L97-L98
[5]: https://github.com/kubernetes-incubator/cri-o/blob/v1.10.0/server/container_create.go#L830-L834
[6]: https://github.com/kubernetes-incubator/cri-o/pull/1345/
[7]: https://github.com/NVIDIA/nvidia-container-runtime/tree/v1.3.0-1#environment-variables-oci-spec
[8]: https://github.com/opencontainers/runc/pull/1738
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #686
Approved by: mheon
so that the OCI runtime creates the network namespace from the correct
userNS.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #690
Approved by: mheon
first pass at adding in the container related endpoints/methods for the libpod
backend. Couple of important notes:
* endpoints that can use a console are not going to be done until we have "remote" console
* several of the container methods should probably be able to stream as opposed to a one-off return
Signed-off-by: baude <bbaude@redhat.com>
Closes: #708
Approved by: baude
We need these for commit, and they cannot be properly deduced
from just the OCI spec, so save them in the database so we can
retrieve them for commit.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #700
Approved by: rhatdan
The hidden flag is used to override the path of the default mounts file
for testing purposes.
Also modified the secrets pkg to allow for this override to happen.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #678
Approved by: mheon
If an integer is passed into the --user flag, i.e --user=1234
don't look up the user in /etc/passwd, just assign the integer as the uid.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #652
Approved by: mheon
If the host is in FIPS mode and /etc/system-fips exists
/run/secrets/system-fips is created in the container so that
the container can run in FIPS mode as well.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Made necessary changes to functions to include contex.Context wherever needed
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #640
Approved by: baude
--group-add
--blkio-weight-device
--device-read-bps
--device-write-bps
--device-read-iops
--device-write-iops
--group-add now supports group names as well as the gid associated with them.
All the --device flags work now with moderate changes to the code to support both
bps and iops.
Added tests for all the flags.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #590
Approved by: mheon
Instead of checking during init(), which could result in major
locking issues when used with pods, make our dependency checks in
the public API instead. This avoids doing them when we start pods
(where, because of the dependency graph, we can reasonably say
all dependencies are up before we start a container).
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #577
Approved by: rhatdan
We have other tools using containers/storage. They can delete our
containers in c/storage without us knowing. Try and handle this
better by warning instead of erroring when delete our storage and
it is already gone.
This does not handle cases where libpod thinks the container is
mounted, but it is not. This is harder to check for, because
c/storage Mount() and Unmount() take a layer, image, or container
and that complicates our "container no longer exists" question.
Further work is needed here.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #571
Approved by: rhatdan
Adds support for mounting secrets especially on RHEL where the container
can use the host subsription to run yum
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #544
Approved by: rhatdan
This fixes the situation where we fail to create a container when a name already exists.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #517
Approved by: baude
Add only when it's not already present.
Add a more specific version in podman spec generation
so we get 'container=podman' not 'container=libpod'
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #540
Approved by: baude
This will allow programs to easily identify they are running in a
container
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #533
Approved by: baude
Migrate the podman create and commit subcommandis to leverage the images library. I also had
to migrate the cmd/ portions of run and rmi.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #498
Approved by: mheon
This solves our prior problems with attach races by ensuring the
order is correct.
Also contains substantial cleanups to the attach code.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #482
Approved by: baude
This represents the stage3 implementation for the image library. At this point, we
are moving the image-centric functions to pkg/image including migration of args and
object-oriented references. This is a not a one-for-one migration of funcs and some
funcs will need to continue to reside in runtime_img as they are overly specific to
libpod and probably not useful to others.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #484
Approved by: baude
Separate Init() and Start() does not make sense on the pod side,
where we may have to start containers in order to initialize
others due to dependency orders.
Also adjusts internal containers API for more code sharing.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #478
Approved by: rhatdan
Refactors creation of bind mounts into a separate function that
can be called from elsewhere (e.g. pod start or container
restart). This function stores the mounts in the DB using the
field established last commit.
Spec generation now relies upon this field in the DB instead of
manually enumerating files to be bind mounted in.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #462
Approved by: baude
We don't want this in our public API - better to let us control
what gets put in container storage and where.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #462
Approved by: baude
Replace our old IP and Subnet fields in state with CNI types that
contain a lot more information. Retrieve these structs from the
CNI plugins themselves.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #440
Approved by: baude
Exec sessions now have an ID generated and assigned to their PID
and stored in the database state. This allows us to track what
exec sessions are currently active.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #412
Approved by: baude
Podman should not override users mounts with default mounts
for /etc/hostname, /etc/resolv.conf, and /etc/hosts.
Resolves issue #388
Signed-off-by: baude <bbaude@redhat.com>
Closes: #401
Approved by: mheon
--image-volumes tells podman what to do with the image volumes in the image config
There are 3 options: bind, tmpfs, and ignore
bind puts the volume contents in /var/lib/containers/storage/container-id/volumes/vol-dir
and bind mounts it into the container at /vol-dir
tmpfs mounts /vol-dir as a tmps into the container
ignore doesn't mount the image volumes onto the container
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #377
Approved by: rhatdan
Normal Stop should not need a timeout, and should use the default
Add a function that does accept a timeout aside it
Signed-off-by: Matthew Heon <mheon@redhat.com>
Closes: #272
Approved by: rhatdan
Adds the ability to override the container's hostname. Also, uses
the first twelve characters of the container ID as the default hostname
if none is provided.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #248
Approved by: baude
Each of these options are destructive in nature, meaning if the user
adds one of them, all current ones are removed from the produced
resolv.conf.
* dns-server allows the user to specify dns servers.
* dns-opt allows the user to specify special resolv.conf options
* dns-search allows the user to specify search domains
The add-host option is not destructive and truly just adds the host
to /etc/hosts.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #231
Approved by: mheon
Weighing in at ~1700 lines, container.go is just too big. Split
it into three files: core structs and accessors (container.go),
public API (container_api.go), and internal functions
(container_internal.go).
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
TomSweeneyRedHat
Giuseppe Scrivano
Daniel J Walsh
Matthew Heon
Adrian Reber
OpenShift Merge Robot
baude
haircommander
Matthew Heon
umohnani8
W. Trevor King
Marco Vedovati
Wim
Jhon Honce
Nalin Dahyabhai
Nathan Williams