if the cgroup manager is set to systemd, detect if dbus is available,
otherwise fallback to --cgroup-manager=cgroupfs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
make sure the user overrides are stored in the configuration file when
first created.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is a horrible hack to work around issues with Fedora 31, but
other distros might need it to, so we'll move it upstream.
I do not recommend this functionality for general use, and the
manpages and other documentation will reflect this. But for some
upgrade cases, it will be the only thing that allows for a
working system.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
If a user upgrades to a machine that defaults to a cgroups V2 machine
and has a libpod.conf file in their homedir that defaults to OCI Runtime runc,
then we want to change it one time to crun.
runc as of this point does not work on cgroupV2 systems. This patch will
eventually be removed but is needed until runc has support.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If c/storage paths are explicitly set to "" (the empty string) it
will use compiled-in defaults. However, it won't tell us this via
`storage.GetDefaultStoreOptions()` - we just get the empty string
(which can put our defaults, some of which are relative to
c/storage, in a bad spot).
Hardcode a sane default for cases like this. Furthermore, add
some sanity checks to paths, to ensure we don't use relative
paths for core parts of libpod.
Fixes#3952
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
drop the pkg/firewall module and start using the firewall CNI plugin.
It requires an updated package for CNI plugins.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add ability to not activate sd_notify when running under varlink as it
causes deadlocks and hangs.
Fixes: #3572
Signed-off-by: baude <bbaude@redhat.com>
when creating the default libpod.conf file, be sure the default OCI
runtime is cherry picked from the system configuration.
Closes: https://github.com/containers/libpod/issues/3781
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we should be looking for the libpod.conf file in /usr/share/containers
and not in /usr/local. packages of podman should drop the default
libpod.conf in /usr/share. the override remains /etc/containers/ as
well.
Fixes: #3702
Signed-off-by: baude <bbaude@redhat.com>
The `$PATH` environment variable will now used as fallback if no valid
runtime or conmon path matches. The debug logs has been updated to state
the used executable.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
NixOS links the current system state to `/run/current-system`, so we
have to add these paths to the configuration files as well to work out
of the box.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Touch up a number of formating issues for XDG_RUNTIME_DIRS in a number
of man pages. Make use of the XDG_CONFIG_HOME environment variable
in a rootless environment if available, or set it if not.
Also added a number of links to the Rootless Podman config page and
added the location of the auth.json files to that doc.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
When a command (like `ps`) requests no store be created, but also
requires a refresh be performed, we have to ignore its request
and initialize the store anyways to prevent segfaults. This work
was done in #3532, but that missed one thing - initializing a
storage service. Without the storage service, Podman will still
segfault. Fix that oversight here.
Fixes#3625
Signed-off-by: Matthew Heon <mheon@redhat.com>
some podman commands do not require the use of a container/image store.
in those cases, it is more effecient to not open the store, because that
results in having to also close the store which can be costly when the
system is under heavy write I/O loads.
Signed-off-by: baude <bbaude@redhat.com>
at least on Fedora 30 it creates the /run/user/UID directory for the
user logged in via ssh.
This needs to be done very early so that every other check when we
create the default configuration file will point to the correct
location.
Closes: https://github.com/containers/libpod/issues/3410
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we had a regression where the rootless user tried to use the global
configuration file. We should not try to use the global configuration
when running in rootless but only cherry-pick some settings from there
when creating the file for the first time.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Conmon has moved out of cri-o and into it's own dedicated repository.
This commit updates configuration and definitions which referenced
the old cri-o based paths.
Signed-off-by: Chris Evich <cevich@redhat.com>
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
We may want to ship configurations including more than one
runtime configuration - for example, crun and runc and kata, all
configured. However, we don't want to make these extra runtimes
hard requirements, so let's not fatally error when we can't find
their executables.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently we report cgroupmanager default as systemd, even if the user modified
the libpod.conf. Also cgroupmanager does not work in rootless mode. This
PR correctly identifies the default cgroup manager or reports it is not supported.
Also add homeDir to correctly get the homedir if the $HOME is not set. Will
attempt to get Homedir out of /etc/passwd.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- PREFIX is now passed saved in the binary at build-time so that default
paths match installation paths.
- ETCDIR is also overridable in a similar way.
- DESTDIR is now applied on top of PREFIX for install/uninstall steps.
Previously, a DESTDIR=/foo PREFIX=/bar make would install into /bar,
rather than /foo/bar.
Signed-off-by: Lawrence Chan <element103@gmail.com>
add a new configuration `runtime_supports_json` to list what OCI
runtimes support the --log-format=json option. If the runtime is not
listed here, libpod will redirect stdout/stderr from the runtime
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
use a pause process to keep the user and mount namespace alive.
The pause process is created immediately on reload, and all successive
Podman processes will refer to it for joining the user&mount
namespace.
This solves all the race conditions we had on joining the correct
namespaces using the conmon processes.
As a fallback if the join fails for any reason (e.g. the pause process
was killed), then we try to join the running containers as we were
doing before.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
once the default event logger was removed from libpod.conf, we need to
set the default based on whether the systemd build tag is used or not.
Signed-off-by: baude <bbaude@redhat.com>
We want to start supporting the registries.conf format.
Also start showing blocked registries in podman info
Fix sorting so all registries are listed together in podman info.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We merged #2950 with some nits still remaining, as Giuseppe was
going on PTO. This addresses those small requested changes.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it is useful to migrate existing containers to a new version of
podman. Currently, it is needed to migrate rootless containers that
were created with podman <= 1.2 to a newer version which requires all
containers to be running in the same user namespace.
Closes: https://github.com/containers/libpod/issues/2935
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
create immediately a namespace if we need a refresh. This is
necessary to access the rootless storage.
Closes: https://github.com/containers/libpod/issues/2894
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
simplify the rootless implementation to use a single user namespace
for all the running containers.
This makes the rootless implementation behave more like root Podman,
where each container is created in the host environment.
There are multiple advantages to it: 1) much simpler implementation as
there is only one namespace to join. 2) we can join namespaces owned
by different containers. 3) commands like ps won't be limited to what
container they can access as previously we either had access to the
storage from a new namespace or access to /proc when running from the
host. 4) rootless varlink works. 5) there are only two ways to enter
in a namespace, either by creating a new one if no containers are
running or joining the existing one from any container.
Containers created by older Podman versions must be restarted.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
in the few places where we care about skipping the storage
initialization, we can simply use the process effective UID, instead
of relying on a global boolean flag.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We have a very high performance JSON library that doesn't need to
perform code generation. Let's use it instead of our questionably
performant, reflection-dependent deep copy library.
Most changes because some functions can now return errors.
Also converts cmd/podman to use jsoniter, instead of pkg/json,
for increased performance.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
split the generation for the default storage.conf and when we write it
if not existing for a rootless user.
This is necessary because during the startup we might be overriding
the default configuration through --storage-driver and --storage-opt,
that would not be written down to the storage.conf file we generated.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if the settings are available in the user config file, do not override
them with the global configuration.
Closes: https://github.com/containers/libpod/issues/2614
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we had two functions NewRuntimeFromConfig and NewRuntime that differed
only for the config file they use.
Move comon logic to newRuntimeFromConfig and let it lookup the
configuration file to use when one is not specified.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we use "podman info" to reconfigure the runtime after a reboot, but we
don't propagate the error message back if something goes wrong.
Closes: https://github.com/containers/libpod/issues/2584
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When the configuration file is specified, be sure to fill rootless
compatible values in the default configuration.
Closes: https://github.com/containers/libpod/issues/2510
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
No reason to do it in util/ anymore. It's always going to be a
subdirectory of c/storage graph root by default, so we can just
set it after the return.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Instead of passing in defaults via WithStorageConfig after
computing them in cmd/podman/libpodruntime, do all defaults in
libpod itself.
This can alleviate ordering issues which caused settings in the
libpod config (most notably, volume path) to be ignored.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If this doesn't match, we end up not being able to access named
volumes mounted into containers, which is bad. Use the same
validation that we use for other critical paths to ensure this
one also matches.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We want named volumes to be created in a subdirectory of the
c/storage graph root, the same as the libpod root directory is
now. As such, we need to adjust its location when the graph root
changes location.
Also, make a change to how we set the default. There's no need to
explicitly set it every time we initialize via an option - that
might conflict with WithStorageConfig setting it based on graph
root changes. Instead, just initialize it in the default config
like our other settings.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The original intent behind the requirement was to ensure that, if
two SHM lock structs were open at the same time, we should not
make such a runtime available to the user, and should clean it up
instead.
It turns out that we don't even need to open a second SHM lock
struct - if we get an error mapping the first one due to a lock
count mismatch, we can just delete it, and it cleans itself up
when it errors. So there's no reason not to return a valid
runtime.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When we're renumbering locks, we're destroying all existing
allocations anyways, so destroying the old lock struct is not a
particularly big deal. Existing long-lived libpod instances will
continue to use the old locks, but that will be solved in a
followon.
Also, solve an issue with returning error values in the C code.
There were a few places where we return ERRNO where it was not
set, so make them return actual error codes).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We can't do renumbering after init - we need to open a
potentially invalid locks file (too many/too few locks), and then
potentially delete the old locks and make new ones.
We need to be in init to bypass the checks that would otherwise
make this impossible.
This leaves us with two choices: make RenumberLocks a separate
entrypoint from NewRuntime, duplicating a lot of configuration
load code (we need to know where the locks live, how many there
are, etc) - or modify NewRuntime to allow renumbering during it.
Previous experience says the first is not really a viable option
and produces massive code bloat, so the second it is.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add backward compatibility for `runtime_path` that was used by older
versions of Podman.
The issue was introduced with: 650cf122e1
If `runtime_path` is specified, it overrides any other configuration
and a warning is printed.
It should be considered deprecated and will be removed in future.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if some paths are overriden in the global configuration file, be sure
that rootless podman honors them.
Closes: https://github.com/containers/libpod/issues/2174
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we can define multiple OCI runtimes that can be chosen with
--runtime.
in libpod.conf is possible to specify them with:
[runtimes]
foo = [
"/usr/bin/foo",
"/usr/sbin/foo",
]
bar = [
"/usr/bin/foo",
"/usr/sbin/foo",
]
If the argument to --runtime is an absolute path then it is used
directly without any lookup in the configuration.
Closes: https://github.com/containers/libpod/issues/1750
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This deprecates the libpod.conf variable of `runtime_path=`, and now has
`runtimes=`, like a map for naming the runtime, preparing for a
`--runtime` flag to `podman run` (i.e. runc, kata, etc.)
Reference: https://github.com/containers/libpod/issues/1750
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
This patch makes the path unigue to each UID.
Also cleans up some return code to return the path it is trying to lock.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Don't initialize the lock manager until almost the end of libpod
init, so we can guarantee our tmp dir is properly set up and
exists. This wasn't an issue on systems that had previously run
Podman, but CI caught it.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This will hopefully help cases where libpod is initialized
multiple times on the same system (as on our CI tests).
We still run into potential issues where multiple Podmans with
multiple tmp paths try to run on the same system - we could end
up thrashing the locks.
I think we need a file locks driver for situations like that. We
can also see about storing paths in the SHM segment, to make sure
multiple libpod instances aren't using the same one.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Remove runtime's lockDir as it is no longer needed after the lock
rework.
Add a trivial in-memory lock manager for unit testing
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Add support for executing an init binary as PID 1 in a container to
forward signals and reap processes. When the `--init` flag is set for
podman-create or podman-run, the init binary is bind-mounted to
`/dev/init` in the container and "/dev/init --" is prepended to the
container's command.
The default base path of the container-init binary is `/usr/libexec/podman`
while the default binary is catatonit [1]. This default can be changed
permanently via the `init_path` field in the `libpod.conf` configuration
file (which is recommended for packaging) or temporarily via the
`--init-path` flag of podman-create and podman-run.
[1] https://github.com/openSUSE/catatonitFixes: #1670
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Overriding storage.conf is not intuitive behavior, so pop up an
error message when it happens, so people know that bad things are
happening.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Display the trust policy of the host system. The trust policy is stored in the /etc/containers/policy.json file and defines a scope of registries or repositories.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Add support for podman volume and its subcommands.
The commands supported are:
podman volume create
podman volume inspect
podman volume ls
podman volume rm
podman volume prune
This is a tool to manage volumes used by podman. For now it only handle
named volumes, but eventually it will handle all volumes used by podman.
Signed-off-by: umohnani8 <umohnani@redhat.com>
We don't use CNI to configure networks for rootless containers,
so no need to set it up. It may also cause issues with inotify,
so disabling it resolves some potential problems.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Instead of storing the runtime's file lock dir in the BoltDB
state, refer to the runtime inside the Bolt state instead, and
use the path stored in the runtime.
This is necessary since we moved DB initialization very far up in
runtime init, before the locks dir is properly initialized (and
it must happen before the locks dir can be created, as we use the
DB to retrieve the proper path for the locks dir now).
Signed-off-by: Matthew Heon <mheon@redhat.com>
Part of the motivation for 800eb863 (Hooks supports two directories,
process default and override, 2018-09-17, #1487) was [1]:
> We only use this for override. The reason this was caught is people
> are trying to get hooks to work with CoreOS. You are not allowed to
> write to /usr/share... on CoreOS, so they wanted podman to also look
> at /etc, where users and third parties can write.
But we'd also been disabling hooks completely for rootless users. And
even for root users, the override logic was tricky when folks actually
had content in both directories. For example, if you wanted to
disable a hook from the default directory, you'd have to add a no-op
hook to the override directory.
Also, the previous implementation failed to handle the case where
there hooks defined in the override directory but the default
directory did not exist:
$ podman version
Version: 0.11.2-dev
Go Version: go1.10.3
Git Commit: "6df7409cb5a41c710164c42ed35e33b28f3f7214"
Built: Sun Dec 2 21:30:06 2018
OS/Arch: linux/amd64
$ ls -l /etc/containers/oci/hooks.d/test.json
-rw-r--r--. 1 root root 184 Dec 2 16:27 /etc/containers/oci/hooks.d/test.json
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:31:19-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:31:19-08:00" level=warning msg="failed to load hooks: {}%!(EXTRA *os.PathError=open /usr/share/containers/oci/hooks.d: no such file or directory)"
With this commit:
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /etc/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="added hook /etc/containers/oci/hooks.d/test.json"
time="2018-12-02T21:33:07-08:00" level=debug msg="hook test.json matched; adding to stages [prestart]"
time="2018-12-02T21:33:07-08:00" level=warning msg="implicit hook directories are deprecated; set --hooks-dir="/etc/containers/oci/hooks.d" explicitly to continue to load hooks from this directory"
time="2018-12-02T21:33:07-08:00" level=error msg="container create failed: container_linux.go:336: starting container process caused "process_linux.go:399: container init caused \"process_linux.go:382: running prestart hook 0 caused \\\"error running hook: exit status 1, stdout: , stderr: oh, noes!\\\\n\\\"\""
(I'd setup the hook to error out). You can see that it's silenly
ignoring the ENOENT for /usr/share/containers/oci/hooks.d and
continuing on to load hooks from /etc/containers/oci/hooks.d.
When it loads the hook, it also logs a warning-level message
suggesting that callers explicitly configure their hook directories.
That will help consumers migrate, so we can drop the implicit hook
directories in some future release. When folks *do* explicitly
configure hook directories (via the newly-public --hooks-dir and
hooks_dir options), we error out if they're missing:
$ podman --hooks-dir /does/not/exist run --rm docker.io/library/alpine echo 'successful container'
error setting up OCI Hooks: open /does/not/exist: no such file or directory
I've dropped the trailing "path" from the old, hidden --hooks-dir-path
and hooks_dir_path because I think "dir(ectory)" is already enough
context for "we expect a path argument". I consider this name change
non-breaking because the old forms were undocumented.
Coming back to rootless users, I've enabled hooks now. I expect they
were previously disabled because users had no way to avoid
/usr/share/containers/oci/hooks.d which might contain hooks that
required root permissions. But now rootless users will have to
explicitly configure hook directories, and since their default config
is from ~/.config/containers/libpod.conf, it's a misconfiguration if
it contains hooks_dir entries which point at directories with hooks
that require root access. We error out so they can fix their
libpod.conf.
[1]: https://github.com/containers/libpod/pull/1487#discussion_r218149355
Signed-off-by: W. Trevor King <wking@tremily.us>
We don't need this for anything more than rootless work in Libpod
now, but Buildah still uses it as it was originally written, so
leave it intact as part of our API.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Ensure that the directory where we will create the Podman db
exists prior to creating the database - otherwise creating the DB
will fail.
Signed-off-by: Matthew Heon <mheon@redhat.com>
We already create the locks directory as part of the libpod
runtime's init - no need to do it again as part of BoltDB's init.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Previous commits ensured that we would use database-configured
paths if not explicitly overridden.
However, our runtime generation did unconditionally override
storage config, which made this useless.
Move rootless storage configuration setup to libpod, and change
storage setup so we only override if a setting is explicitly
set, so we can still override what we want.
Signed-off-by: Matthew Heon <mheon@redhat.com>
If the DB contains default paths, and the user has not explicitly
overridden them, use the paths in the DB over our own defaults.
The DB validates these paths, so it would error and prevent
operation if they did not match. As such, instead of erroring, we
can use the DB's paths instead of our own.
Signed-off-by: Matthew Heon <mheon@redhat.com>
To configure runtime fields from the database, we need to know
whether they were explicitly overwritten by the user (we don't
want to overwrite anything that was explicitly set). Store a
struct containing whether the variables we'll grab from the DB
were explicitly set by the user so we know what we can and can't
overwrite.
This determines whether libpod runtime and static dirs were set
via config file in a horribly hackish way (double TOML decode),
but I can't think of a better way, and it shouldn't be that
expensive as the libpod config is tiny.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Previously, we implicitly validated runtime configuration against
what was stored in the database as part of database init. Make
this an explicit step, so we can call it after the database has
been initialized. This will allow us to retrieve paths from the
database and use them to overwrite our defaults if they differ.
Signed-off-by: Matthew Heon <mheon@redhat.com>
When we configure a runtime, we now will need to hit the DB early
on, so we can verify the paths we're going to use for c/storage are correct.
Signed-off-by: Matthew Heon <mheon@redhat.com>
We probably won't be able to initialize a firewall plugin when we
are not running as root, so we shouldn't even try. Replace the
less-effect EUID check with the rootless package's better check
to make sure we don't accidentally set up the firewall in these
cases.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Also update some missing fields libpod.conf obtions in man pages.
Fix sort order of security options and add a note about disabling
labeling.
When a process requests a new label. libpod needs to reserve all
labels to make sure that their are no conflicts.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1406
Approved by: mheon
ALso cleanup files section or podman man page
Add description of policy.json
Sort alphabetically.
Add more info on oci hooks
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1487
Approved by: umohnani8
We've increased the default rlimits to allow Podman to hold many
ports open without hitting limits and crashing, but this doesn't
solve the amount of memory that holding open potentially
thousands of ports will use. Offer a switch to optionally disable
port reservation for performance- and memory-constrained use
cases.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
The upstream CNI project has a PR open for adding iptables and
firewalld support, but this has been stalled for the better part
of a year upstream.
On advice of several maintainers, we are vendoring this code into
libpod, to perform the relevant firewall configuration ourselves.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1431
Approved by: baude
change the tests to use chroot to set a numeric UID/GID.
Go syscall.Credential doesn't change the effective UID/GID of the
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
be sure to be in an userns for a rootless process before initializing
the runtime. In case we are not running as uid==0, take advantage of
"podman info" that creates the runtime.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
We cannot re-exec into a new user namespace to gain privileges and
access an existing as the new namespace is not the owner of the
existing container.
"unshare" is used to join the user namespace of the target container.
The current implementation assumes that the main process of the
container didn't create a new user namespace.
Since in the setup phase we are not running with euid=0, we must skip
the setup for containers/storage.
Closes: https://github.com/containers/libpod/issues/1329
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1331
Approved by: rhatdan
A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
Need to get some small changes into libpod to pull back into buildah
to complete buildah transition.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1270
Approved by: mheon
During refresh, we cannot hard-fail, as that would mean leaving a
partially-configured state behind, leaving libpod unable to start
without manual intervention.
Instead, log errors refreshing individual containers and pods and
continue. Individual containers and pods may be unusable and need
to be removed manually, but libpod itself will continue to
function.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1252
Approved by: rhatdan
Dependency containers must be in the same namespace, to ensure
there are never problems resolving a dependency.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
This is a refresh of Dan William's PR #974 with a rebase and proper
vendoring of ocicni and containernetworking/cni. It adds the ability
to define multiple networks as so:
podman run --network=net1,net2,foobar ...
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1082
Approved by: baude
when XDG_RUNTIME_DIR is not set, still attempt to use /run/user/$UID
before looking up other directories.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1048
Approved by: mheon
When running podman as non root user always create an userNS and let
the OCI runtime use it.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #936
Approved by: rhatdan
Since we are checking if err is non nil in defer function we need
to define it, so that the check will work correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #985
Approved by: mheon
podman images will not show intermediate images by default.
To view all images, including intermediate images created during
a build, use the --all flag.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #947
Approved by: rhatdan
And add an argument to WithHooksDir to set it.
If the hook dir doesn't exist, the new hooks package considers that a
fatal error. When a podman caller sets
--hooks-dir-path=/some/typoed/directory, a fatal error is more helpful
than silently not loading any hooks. However, callers who call podman
without setting --hooks-dir-path may not need hooks at all. We don't
want to pester those callers with not-exist errors. With this commit,
we:
* Assume the caller knows what they're doing if they set
--hooks-dir-path and set HooksDirNotExistFatal.
* If the caller does not explicitly set --hooks-dir-path, assume they
won't mind if the hook directory is missing and set
HooksDirNotExistFatal false.
We also considered checking for the directory's existence in the code
calling WithHooksDir or from within WithHooksDir, but checks there
would race with the underlying ioutil.ReadDir in the hooks package.
By pushing the warn/error decision down into libpod's implementation,
we avoid a racy "do we expect this to work once libpod gets to it?"
pre-check.
I've also added a check to error if WithHooksDir is called with an
empty-string argument, because we haven't defined the semantics of
that (is it clearing a previous value? Is it effectively the same as
the current directory?). I agree with Matthew that a separate
WithNoHooks, or a *string argument to WithHooks, or some such would be
a better API for clearing previous values [1]. But for now, I'm just
erroring out to fail early for callers who might otherwise be
surprised that libpod ignores empty-string HooksDir.
[1]: https://github.com/projectatomic/libpod/pull/686#issuecomment-385119370
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #686
Approved by: mheon
This shifts the matching logic out of libpod/container_internal and
into the hook package, where we can reuse it after vendoring into
CRI-O. It also adds unit tests with almost-complete coverage. Now
libpod is even more isolated from the hook internals, which makes it
fairly straightforward to bump the hook config file to 1.0.0. I've
dubbed the old format 0.1.0, although it doesn't specify an explicit
version. Motivation for some of my changes with 1.0.0:
* Add an explicit version field. This will make any future JSON
structure migrations more straightforward by avoiding the need for
version-guessing heuristics.
* Collect the matching properties in a new When sub-structure. This
makes the root Hook structure easier to understand, because you
don't have to read over all the matching properties when wrapping
your head around Hook.
* Replace the old 'hook' and 'arguments' with a direct embedding of
the runtime-spec's hook structure. This provides access to
additional upstream properties (args[0], env, and timeout) and
avoids the complication of a CRI-O-specific analog structure.
* Add a 'when.always' property. You can usually accomplish this
effect in another way (e.g. when.commands = [".*"]), but having a
boolean explicitly for this use-case makes for easier reading and
writing.
* Replace the previous annotations array with an annotations map. The
0.1.0 approach matched only the values regardless of key, and that
seems unreliable.
* Replace 'cmds' with 'when.commands', because while there are a few
ways to abbreviate "commands", there's only one way to write it out
in full ;). This gives folks one less thing to remember when
writing hook JSON.
* Replace the old "inject if any specified condition matches" with
"inject if all specified conditions match". This allows for more
precise targeting. Users that need more generous targeting can
recover the previous behavior by creating a separate 1.0.0 hook file
for each specified 0.1.0 condition.
I've added doc-compat support for the various pluralizations of the
0.1.0 properties. Previously, the docs and code were not in
agreement. More on this particular facet in [1].
I've updated the docs to point out that the annotations being matched
are the OCI config annotations. This differs from CRI-O, where the
annotations used are the Kubernetes-supplied annotations [2,3]. For
example, io.kubernetes.cri-o.Volumes [4] is part of CRI-O's runtime
config annotations [5], but not part of the Kubernetes-supplied
annotations CRI-O uses for matching hooks.
The Monitor method supports the CRI-O use-case [6]. podman doesn't
need it directly, but CRI-O will need it when we vendor this package
there.
I've used nvidia-container-runtime-hook for the annotation examples
because Dan mentioned the Nvidia folks as the motivation behind
annotation matching. The environment variables are documented in [7].
The 0.1.0 hook config, which does not allow for environment variables,
only works because runc currently leaks the host environment into the
hooks [8]. I haven't been able to find documentation for their usual
annotation trigger or hook-install path, so I'm just guessing there.
[1]: https://github.com/kubernetes-incubator/cri-o/pull/1235
[2]: https://github.com/kubernetes-incubator/cri-o/blob/v1.10.0/server/container_create.go#L760
[3]: https://github.com/kubernetes-incubator/cri-o/blob/v1.10.0/server/container_create.go#L772
[4]: https://github.com/kubernetes-incubator/cri-o/blob/v1.10.0/pkg/annotations/annotations.go#L97-L98
[5]: https://github.com/kubernetes-incubator/cri-o/blob/v1.10.0/server/container_create.go#L830-L834
[6]: https://github.com/kubernetes-incubator/cri-o/pull/1345/
[7]: https://github.com/NVIDIA/nvidia-container-runtime/tree/v1.3.0-1#environment-variables-oci-spec
[8]: https://github.com/opencontainers/runc/pull/1738
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #686
Approved by: mheon
Made a mistake in my earlier patch. I though that if you add an empty string
to an array, the length of the array would still be 0...
Realised this when vendoring the secrets pkg into cri-o.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #685
Approved by: mheon
The hidden flag is used to override the path of the default mounts file
for testing purposes.
Also modified the secrets pkg to allow for this override to happen.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #678
Approved by: mheon
In the case where podman needs to pull an image, if that registry that the image
resides on is known to be insesure (as defined in /etc/containers/registries.conf),
tls-verify should be altered on the fly.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #626
Approved by: mheon
This fixes the situation where we fail to create a container when a name already exists.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #517
Approved by: baude
The SQLite DB backend has become an unmanageable nightmare. I
like having the option for DB work, but it's become an active
hindrance to further development, and it's definitely not in any
shape to be actively used.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #548
Approved by: baude
Migrate the podman create and commit subcommandis to leverage the images library. I also had
to migrate the cmd/ portions of run and rmi.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #498
Approved by: mheon
The standard config has moved to /usr/share/containers/ per
discussion. An override configuration file is allowed at the
previous /etc/containers/ location. This override will be used in
place of the normal config if both are present, and exists to
override distro packaged configs without modifying the standard
config.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #430
Approved by: rhatdan
This allows more graceful handling of multiple paths in a config
file.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #430
Approved by: rhatdan
add registries and insecure registries to the podman info output. this gives us
some capatibility with other container runtimes.
Resolves issue #420
Signed-off-by: baude <bbaude@redhat.com>
Closes: #422
Approved by: mheon
Also consider "/usr/lib/cni" as a potential directory for CNI plugins.
On some distributions, e.g., on openSUSE, %{_libexecdir} evaluates to
"/usr/lib".
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #416
Approved by: mheon
The packages in Lokesh's ppa that is currently used for podman puts the
conmon and runc binaries in /usr/lib/crio/bin/conmon and /usr/lib/cri-o-runc/sbin/runc
respectively.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #406
Approved by: baude
To account for more path possibilities, we now iterate
a string array of possible paths to try and find paths
to runc and conmon.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #278
Approved by: baude
Ubuntu installs runc to /usr/sbin/runc so we now account
for that. Also, added small check when creating a new
runtime that if we cannot find the runc binary, we bail
out.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #276
Approved by: baude
Normal Stop should not need a timeout, and should use the default
Add a function that does accept a timeout aside it
Signed-off-by: Matthew Heon <mheon@redhat.com>
Closes: #272
Approved by: rhatdan
If user does not specify seccomp file or seccomp file does not exist,
then use the default seccomp settings.
Still need to not hard code /etc/crio/seccomp.json, should move this to
/usr/share/seccomp/seccomp.json
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #233
Approved by: baude
This can now be handled by CNI plugins, so let them manage ports
instead.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #189
Approved by: mheon
Giuseppe Scrivano
OpenShift Merge Robot
Matthew Heon
Miloslav Trmač
Daniel J Walsh
baude
Peter Hunt
Sascha Grunert
TomSweeneyRedHat
Matthew Heon
Chris Evich
Marco Vedovati
Jamie Bliss
Lawrence Chan
Valentin Rothberg
Ryan Gonzalez
Vincent Batts
Matthew Heon
Qi Wang
umohnani8
W. Trevor King
Anders F Björklund
Jhon Honce
Valentin Rothberg