This flag switches to removing containers directly from c/storage
and is mostly used to remove orphan containers.
It's a superior solution to our former one, which attempted
removal from storage under certain circumstances and could, under
some conditions, not trigger.
Also contains the beginning of support for storage in `ps` but
wiring that in is going to be a much bigger pain.
Fixes#3329.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This allows writing output directly to a file, instead of STDOUT.
Makes things easier for some scripting tasks. Like the unit tests
for 'play kube'.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
I took the liberty of combining related checks together
so as to avoid a little duplication; if this is not a
Go best practice, I will revert. I also made a minor
wording adjustment to an error message for clarity.
Also: update wording of man page.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The option to restore a container from an external checkpoint archive
(podman container restore -i /tmp/checkpoint.tar.gz) restores a
container with the same name and same ID as id had before checkpointing.
This commit adds the option '--name,-n' to 'podman container restore'.
With this option the restored container gets the name specified after
'--name,-n' and a new ID. This way it is possible to restore one
container multiple times.
If a container is restored with a new name Podman will not try to
request the same IP address for the container as it had during
checkpointing. This implicitly assumes that if a container is restored
from a checkpoint archive with a different name, that it will be
restored multiple times and restoring a container multiple times with
the same IP address will fail as each IP address can only be used once.
Signed-off-by: Adrian Reber <areber@redhat.com>
add the ability for the podman remote client to use a configuration file
which describes its connections. users can now define a connection the
configuration and then call it by name like:
podman-remote -c connection1
and the destination and user will be derived from the configuration
file. if no -c is provided, we look for a connection in the
configuration file designated as 'default'. If the configuration file
has only one connection, it will be deemed the 'default'.
Signed-off-by: baude <bbaude@redhat.com>
'docker cp' is an alias for 'docker container cp', and podman should have the equivalent alias.
Signed-off-by: Jose Diaz-Gonzalez <email@josediazgonzalez.com>
Add a journald reader that translates the journald entry to a k8s-file formatted line, to be added as a log line
Note: --follow with journald hasn't been implemented. It's going to be a larger undertaking that can wait.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
it creates a namespace where the current UID:GID on the host is mapped
to the same UID:GID in the container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Mark hidden all references to signature-policy
Default all uses of --authfile
Add --authfile support to podman run and podman create.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Mainly add support for podman build using --overlay mounts.
Updates containers/image also adds better support for new registries.conf
file.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
I'd left this out in a4b483c848 (libpod/container_internal: Deprecate
implicit hook directories, 2018-12-02, #1920).
Signed-off-by: W. Trevor King <wking@tremily.us>
define two environment variables, that simplify the task of cleaning
up the storage, as we can do something like:
podman unshare sh -c 'rm -rf $CONTAINERS_GRAPHROOT $CONTAINERS_RUNROOT'
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This command lets the user run a command in a new user namespace like `unshare -u`.
It uses the implementation of unshare in buildah. ( fixes#1388 )
Signed-off-by: Divyansh Kamboj <kambojdivyansh2000@gmail.com>
allow the user to define a remote host and remote username for their
remote podman sessions. this is then feed to the varlink "bridge" as
the ssh credentials and endpoint.
Signed-off-by: baude <bbaude@redhat.com>
We want to start supporting the registries.conf format.
Also start showing blocked registries in podman info
Fix sorting so all registries are listed together in podman info.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fallback to executing ps(1) in case we hit an unknown psgo descriptor.
This ensures backwards compatibility with docker-top, which was purely
ps(1) driven.
Also support comma-separated descriptors as input.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
the podman generate systemd command will generate a systemd unit file
based on the attributes of an existing container and user inputs. the
command outputs the unit file to stdout for the user to copy or
redirect. it is enabled for the remote client as well.
users can set a restart policy as well as define a stop timeout
override for the container.
Signed-off-by: baude <bbaude@redhat.com>
As part of this, rework the number of workers used by various
Podman tasks to match original behavior - need an explicit
fallthrough in the switch statement for that block to work as
expected.
Also, trivial change to Podman cleanup to work on initialized
containers - we need to reset to a different state after cleaning
up the OCI runtime.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The `--mount` options was after the `--uts` option in the man page
for run. This moves it up into alphabetical order. No other changes
to the text.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
it is useful to migrate existing containers to a new version of
podman. Currently, it is needed to migrate rootless containers that
were created with podman <= 1.2 to a newer version which requires all
containers to be running in the same user namespace.
Closes: https://github.com/containers/libpod/issues/2935
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The --read-only-tmpfs option caused podman to mount tmpfs on /run, /tmp, /var/tmp
if the container is running int read-only mode.
The default is true, so you would need to execute a command like
--read-only --read-only-tmpfs=false to turn off this behaviour.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
Supporting the all-tags semantics added some non-trivial code to the
pull command which does not make use of `registries.conf` and introduced
some regressions such as not adhering to the configured search registries.
Speacial case the all-tags flags to let existing users of all-tags
continue working while others can work again. This implies that the
all-tags pull does not adhere to configured search registries while the
default (non-all-tags) pull does.
Note that this is a purely symptomaic fix. A final solution should
include Buildah and the c/image library to avoid redundant and
error-prone code across the projects.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1701922
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We refer to the pause_image and pause_container in the libpod.conf
description, but internally we had infra_image and infra_container.
This means it the user made changes to the conf, it would not effect the
actual tool using libpod.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman system prune would leave pods be, and not prune them if they were stopped.
Fix this by adding a `podman pod prune` command that prunes stopped pods similarly to containers.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Seems like we have some old references to crio man pages left
over in the docs, since we don't mention crio in man pages
we should not be referencing the man page in the see-also.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The 'docker commit' will never include a container's volumes when
committing, without an explicit request through '--change'.
Podman, however, defaulted to including user volumes as image
volumes.
Make this behavior depend on a new flag, '--include-volumes',
and make the default behavior match Docker.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Cursory examination of man pages shows a number of typos:
- missing hyphens
- missing blank line
- longer option should precede shorter option
This is not an extensive fix, there's still a lot that could
be cleaned up.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
libpod.conf defaults to /usr/share/containers/libpod.conf.
Clarify how administrators can override it and the location
of the users version for rootless mode.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Before, there were SELinux denials when a volume was bind-mounted by podman play kube.
Partially fix this by setting the default private label for mounts created by play kube (with DirectoryOrCreate)
For volumes mounted as Directory, the user will have to set their own SELinux permissions on the mount point
also remove left over debugging print statement
Signed-off-by: Peter Hunt <pehunt@redhat.com>
allows users to "watch" the output of podman ps on a set interval in
seconds. in watch mode, the screen is cleared between intervals as well.
podman -ps -w1 watches on 1 second intervals
Signed-off-by: baude <bbaude@redhat.com>
fix typo in Containers space usage: of podman system df -v, add a space for created time Change format string to const
Signed-off-by: Qi Wang <qiwan@redhat.com>
podman will not start a transient service and timer for healthchecks.
this handles the tracking of the timing for health checks.
added the 'started' status which represents the time that a container is
in its start-period.
the systemd timing can be disabled with an env variable of
DISABLE_HC_SYSTEMD="true".
added filter for ps where --filter health=[starting, healthy, unhealthy]
can now be used.
Signed-off-by: baude <bbaude@redhat.com>
podman-generate and -play had the wrong NAMEs.
podman-restart and -volume-prune the wrong SYNOPSIS.
All the rest are varying degrees of minor:
- missing a space between the NAME and description
- multi-line SYNOPSIS that could be collapsed into one
- use of UPPER CASE in synopsis instead of *asterisks*
- improper use of **double asterisks** for options
- varlink and version were transposed in podman-1
- fixed inconsistencies between the description in
the man page and that in the parent manpage. These
are too numerous for me to fix all.
Added: script that could be used in CI to prevent future
such inconsistencies. It cannot be enabled yet because
there are still 35+ inconsistencies in need of cleaning.
This will be difficult to review on github. I suggest
pulling the PR and running 'git log -1 -p | cdif | less'
'cdif' is a handy tool for colorizing individual diffs between
lines:
http://kaz-utashiro.github.io/cdif/
There are other such tools; use your favorite. Comparing
without visual highlights may be painful.
I also encourage you to run hack/man-page-checker and suggest
more fixes for the problems it's finding.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Minor fix to Use message: add IMAGE argument. (I'm a stickler
for this because my zsh completion is self-generating, from
the --help messages).
Also, sort 'tree' before 'trust' in man page.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Add an example to the run man page to illustrate how
you can configure storage from the CLI. This addresses
a request from issue #2662.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
add the ability for users to specify more than one container at a time
while using podman logs. If more than one container is being displayed,
podman will also prepend a shortened container id of the container on
the log line.
also, enabled the podman-remote logs command during the refactoring of
the above ability.
fixes issue #2219
Signed-off-by: baude <bbaude@redhat.com>
When creating a new image volume to be mounted into a container, we need to
make sure the new volume matches the Ownership and permissions of the path
that it will be mounted on.
For example if a volume inside of a containre image is owned by the database
UID, we want the volume to be mounted onto the image to be owned by the
database UID.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Update the `--pull` and `--pull-always` documentation in the build
command to clarify what each does.
Fixes: https://github.com/containers/buildah/issues/1381
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Replaces 'skopeo-containers' with 'containers-common' in the files that
I feel comfortable changing it in. There are a number of rpm building
related files that still have it, but I was hesitant to do so.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Remove the word buildah from the man page and replace it
with podman. Cut and paste job gone bad apparently.
Fixes: #2639
Also: enforce noSubArgs for podman events
Also: remove unnecessary '[flags]' from Use message (Cobra
adds it automatically)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make the usage messages (and options) different between
podman inspect, podman image inspect, and podman container inspect.
Disable inapplicable options (-l, -s) for podman image inspect
Disable -t (type) when the type is implicit through the subcommand.
Update man page to reflect differences in usage.
Fix broken test.
Uglier than desirable due to Go and Cobra limitations
Signed-off-by: Ed Santiago <santiago@redhat.com>
integration of healthcheck into create and run as well as inspect.
healthcheck enhancements are as follows:
* add the following options to create|run so that non-docker images can
define healthchecks at the container level.
* --healthcheck-command
* --healthcheck-retries
* --healthcheck-interval
* --healthcheck-start-period
* podman create|run --healthcheck-command=none disables healthcheck as
described by an image.
* the healthcheck itself and the healthcheck "history" can now be
observed in podman inspect
* added the wiring for healthcheck history which logs the health history
of the container, the current failed streak attempts, and log entries
for the last five attempts which themselves have start and stop times,
result, and a 500 character truncated (if needed) log of stderr/stdout.
The timings themselves are not implemented in this PR but will be in
future enablement (i.e. next).
Signed-off-by: baude <bbaude@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
With later changes of Podman, you can now use both the
--rm and --detach in a single run command. This PR removes
the documentation in the man pages saying this is not
allowed.
Fixes: #2601
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
...caught by hack/podman-commands.sh script. Which had a little
buglet, which I fixed: add a special case for 'help', which
neither has nor needs a man page.
I believe the podman-commands.sh script is ready to be run in CI,
hint hint.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the ability to manually run a container's healthcheck command.
This is only the first phase of implementing the healthcheck.
Subsequent pull requests will deal with the exposing the results and
history of healthchecks as well as the scheduling.
Signed-off-by: baude <bbaude@redhat.com>
In cases where a user issues the podman container runlabel
command and the image is not local, we now default to pulling
the image automatically to mimic the atomic cli behavior.
Fixes: BZ #1677905
Signed-off-by: baude <bbaude@redhat.com>
Found via:
for i in docs/*.md;do x=$(perl -ne 'if (/\[(podman-.*?)\(1\)\]\((podman-.*?)\.1\.md/) { print " $1 != $2\n" if $1 ne $2; print " ENOENT $2\n" unless -e "docs/$2.1.md" }' <$i); if [ -n "$x" ]; then echo $i; echo "$x";fi;done
...which is probably a good candidate for another CI hook,
except I have no idea how to rewrite it in awk.
Additionally, mark `podman refresh` and `podman container refresh`
as hidden, remove its man page, and remove references to it from
all other man pages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Conceptually simple: include, where applicable, a brief
description of command-line options for each subcommand.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Allow adjusting number of locks in libpod.conf via an already
available knob we previously didn't expose in the default config
file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Make it easy for scripts to determine if an image removal
failure. If only errors were no such image exit with 1
versus 125.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Make it easy for scripts to determine if a container removal
fails versus the container did not exist.
If only errors were no such container exit with 1 versus 125.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If user specifies network namespace and the /etc/netns/XXX/resolv.conf
exists, we should use this rather then /etc/resolv.conf
Also fail cleaner if the user specifies an invalid Network Namespace.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Vendors in Buildah 1.7 into Podman.
Also the latest imagebuilder and changes for
`build --target`
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
in the case of the remote-client, it was decided to hide the latest
flag to avoid confusion for end-users on what the "last" container,
volume, or pod are.
Signed-off-by: baude <bbaude@redhat.com>
The original intent behind the requirement was to ensure that, if
two SHM lock structs were open at the same time, we should not
make such a runtime available to the user, and should clean it up
instead.
It turns out that we don't even need to open a second SHM lock
struct - if we get an error mapping the first one due to a lock
count mismatch, we can just delete it, and it cleans itself up
when it errors. So there's no reason not to return a valid
runtime.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
The fifth and final chunk of examples for the Cobra
examples in the CLI help output.
Also includes a few man page touchups.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Adds the third chunk of Cobra examples to the cli help.
As were putting together a release tomorrow, tried to
hit the heavy commands with this PR.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod.
Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Adds examples to Cobra help for a second chunk of commands.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
First pass of entries for the Examples listed in the Cobra
Help. Will add others in following PR's.
iFix builtin volumes to work with podman volume
Currently builtin volumes are not recored in podman volumes when
they are created automatically. This patch fixes this.
Remove container volumes when requested
Currently the --volume option on podman remove does nothing.
This will implement the changes needed to remove the volumes
if the user requests it.
When removing a volume make sure that no container uses the volume.
Signed-off-by: Daniel J Walsh dwalsh@redhat.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Go templates were not being processed or printed correctly for podman
pod stats. Added the ability to do templates as well as honor the
table identifier.
Fixes#2258
Signed-off-by: baude <bbaude@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Add --all-tags for the `podman pull` command so all tags
of an image will be pulled, not just ':latest'. Emulates
the change in Buildah https://github.com/containers/buildah/pull/1263
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Currently we can get into a state where a container exists in
storage but does not exist in libpod. If the user forces a
removal of this container, then we should remove it from storage
even if the container is owned by another tool.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
After the last update, @mtrmac had some great suggestions which I've incorporated.
I've updated the G:oogle doc and have added this PR in case it's easier to see the diffs.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Lots of users are attempting to run systemd within a container. They are
being blocked from running SELinux systems since they need the
container_manage_cgroup which is not enabled by default.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are missing the equivalence of the docker system commands
This patch set adds `podman system prune`
and `podman system info`
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
In #1899, @rhatdan asked me to try and tweak the verbiage
a bit in the podman-images-trust man page. I've done so,
or attempted to, and have also added a policy-json(5) link.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Rework the Podman Description. I'm starting off with the Podman man page
to build consensus and we can then add to other places as appropriate.
This partially addresses: #1636
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
The toolbox project would benefit from a few changes to more closely
resembe the original atomic cli project. Changes made are:
* only pull image for container runlabel if the label exists in the image
* if a container image does not have the desired label, exit with non-zero
Signed-off-by: baude <bbaude@redhat.com>
we now, by default, only prune dangling images. if --all is passed, we
prune dangling images AND images that do not have an associated containers.
also went ahead and enabled the podman-remote image prune side of things.
Fixes: #2192
Signed-off-by: baude <bbaude@redhat.com>
just tested with podman 1.0.0 on fedora 29
we don't need sudo
I tried this again and it seems like we DO need sudo?
Maybe I misunderstood something
but looks like I am unable to reproduce getting an IP address
also it would be nice if creating a check point
(which I belive means writing to disk) could be done without root
but I guess it depends on where on disk I am writing?
in any case, here is my new console output
```console
[kus@asus-vivobook personal]$ cd libpod/
[kus@asus-vivobook libpod]$ git checkout patch-1
Branch 'patch-1' set up to track remote branch 'patch-1' from 'origin'.
Switched to a new branch 'patch-1'
[kus@asus-vivobook libpod]$ podman run -dt -e HTTPD_VAR_RUN=/var/run/httpd -e HTTPD_MAIN_CONF_D_PATH=/etc/httpd/conf.d \
> -e HTTPD_MAIN_CONF_PATH=/etc/httpd/conf \
> -e HTTPD_CONTAINER_SCRIPTS_PATH=/usr/share/container-scripts/httpd/ \
> registry.fedoraproject.org/f29/httpd /usr/bin/run-httpd
Trying to pull registry.fedoraproject.org/f29/httpd...Getting image source signatures
Copying blob 281a37f51f75: 85.68 MiB / 85.68 MiB [=======================] 1m47s
Copying blob ab0d48faadd2: 4.64 MiB / 4.64 MiB [=========================] 1m47s
Copying blob e1bf69dce18d: 49.77 MiB / 49.77 MiB [=======================] 1m47s
Copying config 532763348c4e: 6.66 KiB / 6.66 KiB [==========================] 0s
Writing manifest to image destination
Storing signatures
78917177dbf7634993fdcc44e0bc90c9422482b9a9e757c85c14dfd1ee09c777
[kus@asus-vivobook libpod]$ podman ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
78917177dbf7 registry.fedoraproject.org/f29/httpd:latest container-entrypo... 4 seconds ago Up 3 seconds ago nifty_lewin
[kus@asus-vivobook libpod]$ podman inspect -l | grep IPAddress\"
"IPAddress": "",
[kus@asus-vivobook libpod]$ sudo podman inspect -l | grep IPAddress\"
[sudo] password for kus:
no such container
[kus@asus-vivobook libpod]$ podman logs --latest
=> sourcing 10-set-mpm.sh ...
=> sourcing 20-copy-config.sh ...
=> sourcing 40-ssl-certs.sh ...
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 10.0.2.100. Set the 'ServerName' directive globally to suppress this message
[Tue Jan 22 12:59:38.887673 2019] [ssl:warn] [pid 1:tid 140100965338496] AH01909: 10.0.2.100:8443:0 server certificate does NOT include an ID which matches the server name
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 10.0.2.100. Set the 'ServerName' directive globally to suppress this message
[Tue Jan 22 12:59:38.998169 2019] [ssl:warn] [pid 1:tid 140100965338496] AH01909: 10.0.2.100:8443:0 server certificate does NOT include an ID which matches the server name
[Tue Jan 22 12:59:38.998876 2019] [lbmethod_heartbeat:notice] [pid 1:tid 140100965338496] AH02282: No slotmem from mod_heartmonitor
[Tue Jan 22 12:59:39.001562 2019] [cgid:error] [pid 28:tid 140100965338496] (13)Permission denied: AH01243: Couldn't bind unix domain socket /run/httpd/cgisock.1
[Tue Jan 22 12:59:39.006051 2019] [mpm_event:notice] [pid 1:tid 140100965338496] AH00489: Apache/2.4.37 (Fedora) OpenSSL/1.1.1-pre9 configured -- resuming normal operations
[Tue Jan 22 12:59:39.006164 2019] [core:notice] [pid 1:tid 140100965338496] AH00094: Command line: 'httpd -D FOREGROUND'
[Tue Jan 22 12:59:39.006445 2019] [cgid:crit] [pid 1:tid 140100965338496] AH01238: cgid daemon failed to initialize
[kus@asus-vivobook libpod]$ podman top 78917177dbf7634993fdcc44e0bc90c9422482b9a9e757c85c14dfd1ee09c777
USER PID PPID %CPU ELAPSED TTY TIME COMMAND
default 1 0 0.000 2m10.968144627s pts/0 0s httpd -D FOREGROUND
default 24 1 0.000 2m9.968688975s pts/0 0s /usr/bin/coreutils --coreutils-prog-shebang=cat /usr/bin/cat
default 25 1 0.000 2m9.968784295s pts/0 0s /usr/bin/coreutils --coreutils-prog-shebang=cat /usr/bin/cat
default 26 1 0.000 2m9.968880829s pts/0 0s /usr/bin/coreutils --coreutils-prog-shebang=cat /usr/bin/cat
default 27 1 0.000 2m9.968997468s pts/0 0s /usr/bin/coreutils --coreutils-prog-shebang=cat /usr/bin/cat
default 29 1 0.000 2m9.969134191s pts/0 0s httpd -D FOREGROUND
default 38 1 0.000 2m9.969239549s pts/0 0s httpd -D FOREGROUND
default 72 1 0.000 2m9.969344456s pts/0 0s httpd -D FOREGROUND
[kus@asus-vivobook libpod]$ podman container checkpoint 78917177dbf7634993fdcc44e0bc90c9422482b9a9e757c85c14dfd1ee09c777
checkpointing a container requires root
[kus@asus-vivobook libpod]$ podman stop --latest
78917177dbf7634993fdcc44e0bc90c9422482b9a9e757c85c14dfd1ee09c777
[kus@asus-vivobook libpod]$ podman ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
78917177dbf7 registry.fedoraproject.org/f29/httpd:latest container-entrypo... 3 minutes ago Exited (0) 9 seconds ago nifty_lewin
[kus@asus-vivobook libpod]$ podman rm --latest
78917177dbf7634993fdcc44e0bc90c9422482b9a9e757c85c14dfd1ee09c777
```
original:
```console
[kus@mcny ~]$ podman run -dt -e HTTPD_VAR_RUN=/var/run/httpd -e HTTPD_MAIN_CONF_D_PATH=/etc/httpd/conf.d \
> -e HTTPD_MAIN_CONF_PATH=/etc/httpd/conf \
> -e HTTPD_CONTAINER_SCRIPTS_PATH=/usr/share/container-scripts/httpd/ \
> registry.fedoraproject.org/f27/httpd /usr/bin/run-httpd
Trying to pull registry.fedoraproject.org/f27/httpd...Getting image source signatures
Copying blob ff3dab903f92: 80.73 MiB / 80.73 MiB [=========================] 14s
Copying blob 9347d6e9d864: 7.30 MiB / 7.30 MiB [===========================] 14s
Copying blob 2fc5c44251d4: 44.82 MiB / 44.82 MiB [=========================] 14s
Copying config 18f01f6f77ef: 6.55 KiB / 6.55 KiB [==========================] 0s
Writing manifest to image destination
Storing signatures
d0362571c3850159315778700a63a305296150177578a9339cca0d9c86ed97f1
[kus@mcny ~]$ podman ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d0362571c385 registry.fedoraproject.org/f27/httpd:latest container-entrypo... 36 seconds ago Up 36 seconds ago happy_babbage
[kus@mcny ~]$
```
Signed-off-by: Kushal <kushaldeveloper@gmail.com>
we can define multiple OCI runtimes that can be chosen with
--runtime.
in libpod.conf is possible to specify them with:
[runtimes]
foo = [
"/usr/bin/foo",
"/usr/sbin/foo",
]
bar = [
"/usr/bin/foo",
"/usr/sbin/foo",
]
If the argument to --runtime is an absolute path then it is used
directly without any lookup in the configuration.
Closes: https://github.com/containers/libpod/issues/1750
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
There's been a lot of discussion over in [1] about how to support the
NVIDIA folks and others who want to be able to create devices
(possibly after having loaded kernel modules) and bind userspace
libraries into the container. Currently that's happening in the
middle of runc's create-time mount handling before the container
pivots to its new root directory with runc's incorrectly-timed
prestart hook trigger [2]. With this commit, we extend hooks with a
'precreate' stage to allow trusted parties to manipulate the config
JSON before calling the runtime's 'create'.
I'm recycling the existing Hook schema from pkg/hooks for this,
because we'll want Timeout for reliability and When to avoid the
expense of fork/exec when a given hook does not need to make config
changes [3].
[1]: https://github.com/opencontainers/runc/pull/1811
[2]: https://github.com/opencontainers/runc/issues/1710
[3]: https://github.com/containers/libpod/issues/1828#issuecomment-439888059
Signed-off-by: W. Trevor King <wking@tremily.us>
The --sig-proxy option in both 'podman attach' and 'podman run' default
to true, and there's no reason for 'podman start --attach' to be any
different. However, since it only makes sense to proxy signals when
the container is attached, 'podman start --sig-proxy' will continue to
error if --attach isn't used.
Signed-off-by: Debarshi Ray <rishi@fedoraproject.org>
Generate a signature claim for an image using user keyring (--sign-by). The signature file will be stored in simple json format under the default or the given directory (--directory or yaml file in /etc/containers/registries.d/).
Signed-off-by: Qi Wang <qiwan@redhat.com>
Users have no idea what storage configuration file is used to setup
storage, so adding this to podman info, should make it easier to
discover.
This requires a revendor of containers/storage
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add support for executing an init binary as PID 1 in a container to
forward signals and reap processes. When the `--init` flag is set for
podman-create or podman-run, the init binary is bind-mounted to
`/dev/init` in the container and "/dev/init --" is prepended to the
container's command.
The default base path of the container-init binary is `/usr/libexec/podman`
while the default binary is catatonit [1]. This default can be changed
permanently via the `init_path` field in the `libpod.conf` configuration
file (which is recommended for packaging) or temporarily via the
`--init-path` flag of podman-create and podman-run.
[1] https://github.com/openSUSE/catatonitFixes: #1670
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
A common failure with people building container images is the
creation of large sparse files, particularly useradd creating
the lastlog file.
This PR Documents the failures.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow multiple alias for listing containers and images.
Also fix documentation for umount and unmount
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman play kube adds the ability for the user to recreate pods and containers
from a Kubernetes YAML file in libpod.
Signed-off-by: baude <bbaude@redhat.com>
Display the trust policy of the host system. The trust policy is stored in the /etc/containers/policy.json file and defines a scope of registries or repositories.
Signed-off-by: Qi Wang <qiwan@redhat.com>
We need to recommend that users use Systemd unit files if they want
the container to restart automatically.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
no longer require the service object be output to a different file; we should be
doing this inline with the pods for user convenience.
Signed-off-by: baude <bbaude@redhat.com>
Returns user if user is logged-in to the registry. Returns error
if not logged in with non-zero status code.
Signed-off-by: Theodore Cowan <theodore-cowan@pluralsight.com>
like podman stop of containers, we should allow the user to specify
a timeout override when stopping pods; otherwise they have to wait
the full timeout time specified during the pod/container creation.
Signed-off-by: baude <bbaude@redhat.com>
Following SystemContext.DockerInsecureSkipTLSVerify, make the
DockerRegistryOne also an OptionalBool, and update callers.
Explicitly document that --tls-verify=true and --tls-verify unset
have different behavior in those commands where the behavior changed
(or where it hasn't changed but the documentation needed updating).
Also make the --tls-verify man page sections a tiny bit more consistent
throughout.
This is a minimal fix, without changing the existing "--tls-verify=true"
paths nor existing manual insecure registry lookups.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Per discussion with Dan, it would be better to automatically
handle potential runtime errors by automatically syncing if they
occur. Retaining the flag for `ps` makes sense, as we won't even
be calling the OCI runtime and as such won't see errors if the
state desyncs, but rm can be handled automatically.
The automatic desync handling code will take some additional work
so we'll land this as-is (sync on ps is enough to solve most
desync issues).
Signed-off-by: Matthew Heon <mheon@redhat.com>
The previous commit added support for --sync to podman rm to
ensure state inconsistencies would not prevent containers from
being removed.
Add the flag to podman ps as well, so that all containers can be
forcibly synced and all state inconsistencies resolved.
Signed-off-by: Matthew Heon <mheon@redhat.com>
With the changes made recently to ensure Podman does not hit the
OCI runtime as often to sync state, we can find ourselves in a
situation where the runtime's state does not match ours.
Add a --sync flag to podman rm to ensure we can still remove
containers when this happens.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Add support for podman volume and its subcommands.
The commands supported are:
podman volume create
podman volume inspect
podman volume ls
podman volume rm
podman volume prune
This is a tool to manage volumes used by podman. For now it only handle
named volumes, but eventually it will handle all volumes used by podman.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Allow user to prune unused/unnamed images, the layer images from building,
via podman rmi --prune.
Allow user to prune stopped/exiuted containers via podman rm --prune.
This should resolve#1910
Signed-off-by: baude <bbaude@redhat.com>
when a user specifies --pod to podman create|run, we should create that pod
automatically. the port bindings from the container are then inherited by
the infra container. this signicantly improves the workflow of running
containers inside pods with podman. the user is still encouraged to use
podman pod create to have more granular control of the pod create options.
Signed-off-by: baude <bbaude@redhat.com>
Daniel J Walsh
Matthew Heon
Giuseppe Scrivano
OpenShift Merge Robot
Ed Santiago
Ashley Cui
Jonathan Wakely
Jens Petersen
Adrian Reber
Marcus Müller
baude
Jose Diaz-Gonzalez
Peter Hunt
W. Trevor King
TomSweeneyRedHat
Divyansh Kamboj
Qi Wang
Axel Obermeier
Valentin Rothberg
James Cassell
Ulrich Teichert
Robert P. J. Day
Luke Short
Pat Riehecky
Cleber Rosa
Kunal Kushwaha
Jhon Honce
Ken Dreyer
Kushal
Debarshi Ray
Vincent Batts
Theodore Cowan
Miloslav Trmač
Matthew Heon
umohnani8