added support for pod devices. The device gets added to the infra container and
recreated in all containers that join the pod.
This required a new container config item to keep track of the original device passed in by the user before
the path was parsed into the container device.
Signed-off-by: cdoern <cdoern@redhat.com>
added support for the --volume flag in pods using the new infra container design.
users can specify all volume options they can with regular containers
resolves#10379
Signed-off-by: cdoern <cdoern@redhat.com>
Allows users to specify a readonly rootfs with :O, in exchange podman will create a writable overlay.
bump builah to v1.22.1-0.20210823173221-da2b428c56ce
[NO TESTS NEEDED]
Signed-off-by: flouthoc <flouthoc.git@gmail.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
this is the first pass at implementing init containers for podman pods.
init containersare made popular by k8s as a way to run setup for pods
before the pods standard containers run.
unlike k8s, we support two styles of init containers: always and
oneshot. always means the container stays in the pod and starts
whenever a pod is started. this does not apply to pods restarting.
oneshot means the container runs onetime when the pod starts and then is
removed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
The `IgnorePlatform` options has been removed from the
`LookupImageOptions` in libimage to properly support multi-arch images.
Skip one buildah-bud test which requires updated CI images. This is
currently being done in github.com/containers/podman/pull/10829 but
we need to unblock merging common and buildah into podman.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Much to my regret, there is a number of images in the wild with invalid
platforms breaking the platform checks in libimage that want to make
sure that a local image is matching the expected platform.
Imagine a `podman run --arch=arm64 fedora` with a local amd64 fedora
image. We really shouldn't use the local one in this case and pull down
the arm64 one.
The strict platform checks in libimage in combination with invalid
platforms in images surfaced in Podman being able to pull an image but
failing to look it up in subsequent presence checks. A `podman run`
would hence pull such an image but fail to create the container.
Support images with invalid platforms by vendoring the latest HEAD from
containers/common. Also remove the partially implemented pull-policy
logic from Podman and let libimage handle that entirely. However,
whenever --arch, --os or --platform are specified, the pull policy will
be forced to "newer". This way, we pessimistically assume that the
local image has an invalid platform and we reach out to the registry.
If there's a newer image (i.e., one with a different digest), we'll pull
it down.
Please note that most of the logic has either already been implemented
in libimage or been moved down which allows for removing some clutter
from Podman.
[NO TESTS NEEDED] since c/common has new tests. Podman can rely on the
existing tests.
Fixes: #10648Fixes: #10682
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
Env var secrets are env vars that are set inside the container but not
commited to and image. Also support reading from env var when creating a
secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
volatile containers are a storage optimization that disables *sync()
syscalls for the container rootfs.
If a container is created with --rm, then automatically set the
volatile storage flag as anyway the container won't persist after a
reboot or machine crash.
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- Persist CDIDevices in container config
- Add e2e test
- Log HasDevice error and add additional condition for safety
Signed-off-by: Sebastian Jug <seb@stianj.ug>
Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
A container's workdir can be specified via the CLI via `--workdir` and
via an image config with the CLI having precedence.
Since images have a tendency to specify workdirs without necessarily
shipping the paths with the root FS, make sure that Podman creates the
workdir. When specified via the CLI, do not create the path, but check
for its existence and return a human-friendly error.
NOTE: `crun` is performing a similar check that would yield exit code
127. With this change, however, Podman performs the check and yields
exit code 126. Since this is specific to `crun`, I do not consider it
to be a breaking change of Podman.
Fixes: #9040
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When creating a container, do not clear the input-image name before
looking up image names. Also add a regression test.
Fixes: #8558
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Instead of being interpreted as an argument to the boolean flag,
the 'true' is being intepreted as the Podman command to be run -
so we're trying to run `podman true`, which does not exist. This
causes the cleanup command to fail when `--log-level=debug` is
set, so containers are not cleaned up or removed.
This problem is easily reproduced with any command combining the
`--rm`, `-d`, and `--log-level=debug` flags - the command will
execute and exit, but the container will not be removed.
Separate, but worth looking into later: the errors we get on
trying `podman true` with any flags are terrible - if you just
type `podman true` you get a quite sane "Unrecognized command"
error, but if you try `podman true --rm` you get an "unknown flag
--rm" error - which makes very little sense given the command
itself doesn't exist.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Currently we don't document which end of the podman-remote client server
operations uses the containers.conf. This PR begins documenting this
and then testing to make sure the defaults follow the rules.
Fixes: https://github.com/containers/podman/issues/7657
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman can now support adding network aliases when running containers
(--network-alias). It requires an updated dnsname plugin as well as an
updated ocicni to work properly.
Signed-off-by: baude <bbaude@redhat.com>
Add a new "image" mount type to `--mount`. The source of the mount is
the name or ID of an image. The destination is the path inside the
container. Image mounts further support an optional `rw,readwrite`
parameter which if set to "true" will yield the mount writable inside
the container. Note that no changes are propagated to the image mount
on the host (which in any case is read only).
Mounts are overlay mounts. To support read-only overlay mounts, vendor
a non-release version of Buildah.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Record the correct image name when creating a container by using the
resolved image name if present. Otherwise, default to using the first
available name or an empty string in which case the image must have been
referenced by ID.
Fixes: #8082
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Docker supports log-opt max_size and so does conmon (ALthough poorly).
Adding support for this allows users to at least make sure their containers
logs do not become a DOS vector.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
All containers within a Pod need to run with the same SELinux
label, unless overwritten by the user.
Also added a bunch of SELinux tests to make sure selinux labels
are correct on namespaces.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Record the user-specified "raw" image name in the SpecGenerator, so we
can pass it along to the config when creating a container. We need a
separate field as the image name in the generator may be set to the
ID of the previously pulled image - ultimately the cause of #7404.
Reverting the image name from the ID to the user input would not work
since "alpine" for pulling iterates over the search registries in the
registries.conf but looking up "alpine" normalizes to
"localhost/alpine".
Recording the raw-image name directly in the generator was the best of
the options I considered as no hidden magic from search registries or
normalizations (that may or may not change in the future) can interfere.
The auto-update backend enforces that the raw-image name is a
fully-qualified reference, so we need to worry about that in the front
end.
Fixes: #7407
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman 1.6.2 changed systemd mode auto-detection from commands ending in
``init`` to hard-coded paths ``/sbin/init`` and ``/usr/sbin/init``. This
broke FreeIPA container. ``podman run`` and ``podman create`` now
activate systemd mode when the command is ``/usr/local/sbin/init``.
Fixes: https://github.com/containers/podman/issues/7287
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Buildah and podman build can create images without a working dir.
FROM fedora
WORKDIR /test
If you build this image with caching twice, the second time the image
will not have a working dir.
Similarly if you execute
podman run --workdir /foobar fedora
It blows up since the workingdir is not created automatically.
Finally there was duplicated code for getting the workingdir
out of an image, that this PR removes.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
A recent crun change stopped the creation of the container's
working directory if it does not exist. This is arguably correct
for user-specified directories, to protect against typos; it is
definitely not correct for image WORKDIR, where the image author
definitely intended for the directory to be used.
This makes Podman create the working directory and chown it to
container root, if it does not already exist, and only if it was
specified by an image, not the user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
We were only using the Command field in specgen when determining
whether to enable systemd if systemd=true (the default) was used.
This does not include the entrypoint, and does not include any
entrypoint/command sourced from the image - so an image could be
running systemd and we'd not correctly detect this. Using the
full, final command resolves this and matches Podman v1.9.x
behavior.
Fixes#6920
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In `podman inspect` output for containers and pods, we include
the command that was used to create the container. This is also
used by `podman generate systemd --new` to generate unit files.
With remote podman, the generated create commands were incorrect
since we sourced directly from os.Args on the server side, which
was guaranteed to be `podman system service` (or some variant
thereof). The solution is to pass the command along in the
Specgen or PodSpecgen, where we can source it from the client's
os.Args.
This will still be VERY iffy for mixed local/remote use (doing a
`podman --remote run ...` on a remote client then a
`podman generate systemd --new` on the server on the same
container will not work, because the `--remote` flag will slip
in) but at the very least the output of `podman inspect` will be
correct. We can look into properly handling `--remote` (parsing
it out would be a little iffy) in a future PR.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
--sdnotify container|conmon|ignore
With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI
runtime doesn't pass it into the container. We also advertise "ready" when the
OCI runtime finishes to advertise the service as ready.
With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI
runtime passes it into the container for initialization, and let the container advertise further metadata.
This is the default, which is closest to the behavior podman has done in the past.
The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor
any child processes will talk to systemd.
This removes the need for hardcoded CID and PID files in the command line, and
the PIDFile directive, as the pid is advertised directly through sd-notify.
Signed-off-by: Joseph Gooch <mrwizard@dok.org>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
cdoern
OpenShift Merge Robot
flouthoc
Brent Baude
Vikas Goel
Valentin Rothberg
cdoern
Ashley Cui
Giuseppe Scrivano
Daniel J Walsh
Sebastian Jug
wuhua.ck
Matthew Heon
Eduardo Vega
Matthew Heon
Christian Heimes
Qi Wang
Joseph Gooch