Updates the podman info command to show registries from v1 config file
in the search table format.
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
After a restart, pods and containers both run a refresh()
function to prepare to run after a reboot. Until now, volumes
have not had a similar function, because they had no per-boot
setup to perform.
Unfortunately, this was not noticed when in-memory locking was
introduced to volumes. The refresh() routine is, among other
things, responsible for ensuring that locks are reserved after a
reboot, ensuring they cannot be taken by a freshly-created
container, pod, or volume. If this reservation is not done, we
can end up with two objects using the same lock, potentially
needing to lock each other for some operations - classic recipe
for deadlocks.
Add a refresh() function to volumes to perform lock reservation
and ensure it is called as part of overall refresh().
Fixes#4605Fixes#4621
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Refactor the `RuntimeConfig` along with related code from libpod into
libpod/config. Note that this is a first step of consolidating code
into more coherent packages to make the code more maintainable and less
prone to regressions on the long runs.
Some libpod definitions were moved to `libpod/define` to resolve
circular dependencies.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
if the cgroup manager is set to systemd, detect if dbus is available,
otherwise fallback to --cgroup-manager=cgroupfs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
make sure the user overrides are stored in the configuration file when
first created.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is a horrible hack to work around issues with Fedora 31, but
other distros might need it to, so we'll move it upstream.
I do not recommend this functionality for general use, and the
manpages and other documentation will reflect this. But for some
upgrade cases, it will be the only thing that allows for a
working system.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
If a user upgrades to a machine that defaults to a cgroups V2 machine
and has a libpod.conf file in their homedir that defaults to OCI Runtime runc,
then we want to change it one time to crun.
runc as of this point does not work on cgroupV2 systems. This patch will
eventually be removed but is needed until runc has support.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If c/storage paths are explicitly set to "" (the empty string) it
will use compiled-in defaults. However, it won't tell us this via
`storage.GetDefaultStoreOptions()` - we just get the empty string
(which can put our defaults, some of which are relative to
c/storage, in a bad spot).
Hardcode a sane default for cases like this. Furthermore, add
some sanity checks to paths, to ensure we don't use relative
paths for core parts of libpod.
Fixes#3952
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
drop the pkg/firewall module and start using the firewall CNI plugin.
It requires an updated package for CNI plugins.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add ability to not activate sd_notify when running under varlink as it
causes deadlocks and hangs.
Fixes: #3572
Signed-off-by: baude <bbaude@redhat.com>
when creating the default libpod.conf file, be sure the default OCI
runtime is cherry picked from the system configuration.
Closes: https://github.com/containers/libpod/issues/3781
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we should be looking for the libpod.conf file in /usr/share/containers
and not in /usr/local. packages of podman should drop the default
libpod.conf in /usr/share. the override remains /etc/containers/ as
well.
Fixes: #3702
Signed-off-by: baude <bbaude@redhat.com>
The `$PATH` environment variable will now used as fallback if no valid
runtime or conmon path matches. The debug logs has been updated to state
the used executable.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
NixOS links the current system state to `/run/current-system`, so we
have to add these paths to the configuration files as well to work out
of the box.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Touch up a number of formating issues for XDG_RUNTIME_DIRS in a number
of man pages. Make use of the XDG_CONFIG_HOME environment variable
in a rootless environment if available, or set it if not.
Also added a number of links to the Rootless Podman config page and
added the location of the auth.json files to that doc.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
When a command (like `ps`) requests no store be created, but also
requires a refresh be performed, we have to ignore its request
and initialize the store anyways to prevent segfaults. This work
was done in #3532, but that missed one thing - initializing a
storage service. Without the storage service, Podman will still
segfault. Fix that oversight here.
Fixes#3625
Signed-off-by: Matthew Heon <mheon@redhat.com>
some podman commands do not require the use of a container/image store.
in those cases, it is more effecient to not open the store, because that
results in having to also close the store which can be costly when the
system is under heavy write I/O loads.
Signed-off-by: baude <bbaude@redhat.com>
at least on Fedora 30 it creates the /run/user/UID directory for the
user logged in via ssh.
This needs to be done very early so that every other check when we
create the default configuration file will point to the correct
location.
Closes: https://github.com/containers/libpod/issues/3410
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we had a regression where the rootless user tried to use the global
configuration file. We should not try to use the global configuration
when running in rootless but only cherry-pick some settings from there
when creating the file for the first time.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Conmon has moved out of cri-o and into it's own dedicated repository.
This commit updates configuration and definitions which referenced
the old cri-o based paths.
Signed-off-by: Chris Evich <cevich@redhat.com>
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
We may want to ship configurations including more than one
runtime configuration - for example, crun and runc and kata, all
configured. However, we don't want to make these extra runtimes
hard requirements, so let's not fatally error when we can't find
their executables.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently we report cgroupmanager default as systemd, even if the user modified
the libpod.conf. Also cgroupmanager does not work in rootless mode. This
PR correctly identifies the default cgroup manager or reports it is not supported.
Also add homeDir to correctly get the homedir if the $HOME is not set. Will
attempt to get Homedir out of /etc/passwd.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- PREFIX is now passed saved in the binary at build-time so that default
paths match installation paths.
- ETCDIR is also overridable in a similar way.
- DESTDIR is now applied on top of PREFIX for install/uninstall steps.
Previously, a DESTDIR=/foo PREFIX=/bar make would install into /bar,
rather than /foo/bar.
Signed-off-by: Lawrence Chan <element103@gmail.com>
add a new configuration `runtime_supports_json` to list what OCI
runtimes support the --log-format=json option. If the runtime is not
listed here, libpod will redirect stdout/stderr from the runtime
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
use a pause process to keep the user and mount namespace alive.
The pause process is created immediately on reload, and all successive
Podman processes will refer to it for joining the user&mount
namespace.
This solves all the race conditions we had on joining the correct
namespaces using the conmon processes.
As a fallback if the join fails for any reason (e.g. the pause process
was killed), then we try to join the running containers as we were
doing before.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
once the default event logger was removed from libpod.conf, we need to
set the default based on whether the systemd build tag is used or not.
Signed-off-by: baude <bbaude@redhat.com>
We want to start supporting the registries.conf format.
Also start showing blocked registries in podman info
Fix sorting so all registries are listed together in podman info.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We merged #2950 with some nits still remaining, as Giuseppe was
going on PTO. This addresses those small requested changes.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it is useful to migrate existing containers to a new version of
podman. Currently, it is needed to migrate rootless containers that
were created with podman <= 1.2 to a newer version which requires all
containers to be running in the same user namespace.
Closes: https://github.com/containers/libpod/issues/2935
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
create immediately a namespace if we need a refresh. This is
necessary to access the rootless storage.
Closes: https://github.com/containers/libpod/issues/2894
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
simplify the rootless implementation to use a single user namespace
for all the running containers.
This makes the rootless implementation behave more like root Podman,
where each container is created in the host environment.
There are multiple advantages to it: 1) much simpler implementation as
there is only one namespace to join. 2) we can join namespaces owned
by different containers. 3) commands like ps won't be limited to what
container they can access as previously we either had access to the
storage from a new namespace or access to /proc when running from the
host. 4) rootless varlink works. 5) there are only two ways to enter
in a namespace, either by creating a new one if no containers are
running or joining the existing one from any container.
Containers created by older Podman versions must be restarted.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
in the few places where we care about skipping the storage
initialization, we can simply use the process effective UID, instead
of relying on a global boolean flag.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We have a very high performance JSON library that doesn't need to
perform code generation. Let's use it instead of our questionably
performant, reflection-dependent deep copy library.
Most changes because some functions can now return errors.
Also converts cmd/podman to use jsoniter, instead of pkg/json,
for increased performance.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
split the generation for the default storage.conf and when we write it
if not existing for a rootless user.
This is necessary because during the startup we might be overriding
the default configuration through --storage-driver and --storage-opt,
that would not be written down to the storage.conf file we generated.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if the settings are available in the user config file, do not override
them with the global configuration.
Closes: https://github.com/containers/libpod/issues/2614
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we had two functions NewRuntimeFromConfig and NewRuntime that differed
only for the config file they use.
Move comon logic to newRuntimeFromConfig and let it lookup the
configuration file to use when one is not specified.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we use "podman info" to reconfigure the runtime after a reboot, but we
don't propagate the error message back if something goes wrong.
Closes: https://github.com/containers/libpod/issues/2584
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When the configuration file is specified, be sure to fill rootless
compatible values in the default configuration.
Closes: https://github.com/containers/libpod/issues/2510
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
No reason to do it in util/ anymore. It's always going to be a
subdirectory of c/storage graph root by default, so we can just
set it after the return.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Instead of passing in defaults via WithStorageConfig after
computing them in cmd/podman/libpodruntime, do all defaults in
libpod itself.
This can alleviate ordering issues which caused settings in the
libpod config (most notably, volume path) to be ignored.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Valentin Rothberg
José Guilherme Vanz
Matthew Heon
Nalin Dahyabhai
OpenShift Merge Robot
Peter Hunt
Giuseppe Scrivano
Miloslav Trmač
Daniel J Walsh
baude
Sascha Grunert
TomSweeneyRedHat
Matthew Heon
Chris Evich
Marco Vedovati
Jamie Bliss
Lawrence Chan