Add a new --rootless-cni option to podman unshare to also join the
rootless-cni network namespace. This is useful if you want to connect
to a rootless container via IP address. This is only possible from the
rootless-cni namespace and not from the host namespace. This option also
helps to debug problems in the rootless-cni namespace.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The CNI plugins need access to iptables in $PATH. On debian /usr/sbin
is not added to $PATH for rootless users. This will break rootless
cni completely. To prevent breaking existing users add /usr/sbin to
$PATH in podman if needed.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
One of the side-effects of the `--userns=keep-id` command is
switching the default user of the container to the UID of the
user running Podman (though this can still be overridden by the
`--user` flag). However, it did this by setting the UID and GID
in the OCI spec, and not by informing Libpod of its intention to
switch users via the `WithUser()` option. Because of this, a lot
of the code that should have triggered when the container ran
with a non-root user was not triggering. In the case of the issue
that this fixed, the code to remove capabilities from non-root
users was not triggering. Adjust the keep-id code to properly
inform Libpod of our intention to use a non-root user to fix
this.
Also, fix an annoying race around short-running exec sessions
where Podman would always print a warning that the exec session
had already stopped.
Fixes#9919
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Docker does not relabel this content, and openstack is running
containers in this manner. There is a penalty for doing this
on each container, that is not worth taking on a disable SELinux
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We define in the man page that this overrides the default storage
options, but the code was appending to the existing options.
This PR also makes a change to allow users to specify --storage-opt="".
This will turn off all storage options.
https://github.com/containers/podman/issues/9852
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If a user only has a local dns server in the resolv.conf file the dns
resolution will fail. Instead we create a new resolv.conf which will use
the slirp4netns dns.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
With the new rootless cni supporting network connect/disconnect is easy.
Combine common setps into extra functions to prevent code duplication.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
For rootless users the infra container used the slirp4netns net mode
even when bridge was requested. We can support bridge networking for
rootless users so we have allow this. The default is not changed.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Instead of creating an extra container create a network and mount
namespace inside the podman user namespace. This ns is used to
for rootless cni operations.
This helps to align the rootless and rootful network code path.
If we run as rootless we just have to set up a extra net ns and
initialize slirp4netns in it. The ocicni lib will be called in
that net ns.
This design allows allows easier maintenance, no extra container
with pause processes, support for rootless cni with --uidmap
and possibly more.
The biggest problem is backwards compatibility. I don't think
live migration can be possible. If the user reboots or restart
all cni containers everything should work as expected again.
The user is left with the rootless-cni-infa container and image
but this can safely be removed.
To make the existing cni configs work we need execute the cni plugins
in a extra mount namespace. This ensures that we can safely mount over
/run and /var which have to be writeable for the cni plugins without
removing access to these files by the main podman process. One caveat
is that we need to keep the netns files at `XDG_RUNTIME_DIR/netns`
accessible.
`XDG_RUNTIME_DIR/rootless-cni/{run,var}` will be mounted to `/{run,var}`.
To ensure that we keep the netns directory we bind mount this relative
to the new root location, e.g. XDG_RUNTIME_DIR/rootless-cni/run/user/1000/netns
before we mount the run directory. The run directory is mounted recursive,
this makes the netns directory at the same path accessible as before.
This also allows iptables-legacy to work because /run/xtables.lock is
now writeable.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Make sure we do not display the expected error when using podman network
reload. This is already done for iptables-legacy however iptables-nft
creates a slightly different error message so check for this as well.
The error is logged at info level.
[NO TESTS NEEDED] The test VMs do not use iptables-nft so there is no
way to test this. It is already tested for iptables-legacy.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Fixes: https://github.com/containers/podman/issues/9825
Currently we are using TMPDIR for storaing temporary files
when building images, but not when you directly commit the images.
This change simply uses the TMPDIR environment variable if set
to store temporary files.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Since some unit tests use "busybox", we need to point it to some alias
if we want it to pass CI on F34 where we're running in enforced mode.
Furthermore, make sure that the registries.conf can actually be
overridden in the code.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
In contrast to `assert.NoError`, `require.NoError` treats mismatches
fatally which in many cases is necessary to prevent subsequent checks
from segfaulting.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
As part of a fix for an earlier bug (#5698) we added the ability
for Podman to chown volumes to correctly match the user running
in the container, even in adverse circumstances (where we don't
know the right UID/GID until very late in the process). However,
we only did this for volumes created automatically by a
`podman run` or `podman create`. Volumes made by
`podman volume create` do not get this chown, so their
permissions may not be correct. I've looked, and I don't think
there's a good reason not to do this chwon for all volumes the
first time the container is started.
I would prefer to do this as part of volume copy-up, but I don't
think that's really possible (copy-up happens earlier in the
process and we don't have a spec). There is a small chance, as
things stand, that a copy-up happens for one container and then
a chown for a second, unrelated container, but the odds of this
are astronomically small (we'd need a very close race between two
starting containers).
Fixes#9608
Signed-off-by: Matthew Heon <mheon@redhat.com>
Erik Sjolund reported an issue where a badly formated file
could be passed into the `--tz` option and then the date in the container
would be badly messed up:
```
erik@laptop:~$ echo Hello > file.txt
erik@laptop:~$ podman run --tz=../../../home/erik/file.txt --rm -ti
docker.io/library/alpine cat /etc/localtime
Hello
erik@laptop:~$ podman --version
podman version 3.0.0-rc1
erik@laptop:~$
```
This fix checks to make sure the TZ passed in is a valid
value and then proceeds with the rest of the processing.
This was first reported as a potential security issue, but it
was thought not to be. However, I thought closing the hole
sooner rather than later would be good.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Fixes#5788
This commit adds support for named volumes in podman-generate-kube.
Named volumes are output in the YAML as PersistentVolumeClaims.
To avoid naming conflicts, the volume name is suffixed with "-pvc".
This commit adds a corresponding suffix for host path mounts.
Host path volumes are suffixed with "-host".
Signed-off-by: Jordan Williams <jordan@jwillikers.com>
* Remove orphaned code
* Add meaningful error from LoadImageFromSingleImageArchive() when
heuristic fails to determine payload format
* Correct swagger to output correct types and headers
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when --privileged is used, make sure to not request more capabilities
than currently available in the current context.
[NO TESTS NEEDED] since it fixes existing tests.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Some packages used by the remote client imported the libpod package.
This is not wanted because it adds unnecessary bloat to the client and
also causes problems with platform specific code(linux only), see #9710.
The solution is to move the used functions/variables into extra packages
which do not import libpod.
This change shrinks the remote client size more than 6MB compared to the
current master.
[NO TESTS NEEDED]
I have no idea how to test this properly but with #9710 the cross
compile should fail.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The `libpod/network` package should only be used on the backend and not the
client. The client used this package only for two functions so move them
into a new `pkg/network` package.
This is needed so we can put linux only code into `libpod/network`, see #9710.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
OpenShift Merge Robot