The `--pull` flag should be using the "pull if newer" pull policy rather
than "pull always". This aligns with what the help message states, what
Buildah does and, according to #9111, what was done before,
Also add a test to prevent future regressions.
Fixes: #9111
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Use a mutex to synchronize the slice for storing tests results.
Running the e2e tests in parallel is otherwise subject to race
conditions surfacing in lost entries.
Fixes: #8358
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fixup the bindings and the handling of the --external --por and --sort
flags.
The --storage option was renamed --external, make sure we use
external up and down the stack.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Make sure to write error from conmon on the hijacked http connection.
This fixes issues where errors were not reported on the client side,
for instance, when specified command was not found on the container.
To future generations: I am sorry. The code is complex, and there are
many interdependencies among the concurrent goroutines. I added more
complexity on top but I don't have a good idea of how to reduce
complexity in the available time.
Fixes: #8281
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when inspecting a container that is only connected to the default
network, we should populate the default network in the container inspect
information.
Fixes: #6618
Signed-off-by: baude <bbaude@redhat.com>
MH: Small fixes, added another test
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Docker has, for unclear reasons, three separate fields in their
Create Container struct in which volumes can be placed. Right now
we support two of those - Binds and Mounts, which (roughly)
correspond to `-v` and `--mount` respectively. Unfortunately, we
did not support the third, `Volumes`, which is used for anonymous
named volumes created by `-v` (e.g. `-v /test`). It seems that
volumes listed here are *not* included in the remaining two from
my investigation, so it should be safe to just append them into
our handling of the `Binds` (`-v`) field.
Fixes#8649
Signed-off-by: Matthew Heon <mheon@redhat.com>
A container's workdir can be specified via the CLI via `--workdir` and
via an image config with the CLI having precedence.
Since images have a tendency to specify workdirs without necessarily
shipping the paths with the root FS, make sure that Podman creates the
workdir. When specified via the CLI, do not create the path, but check
for its existence and return a human-friendly error.
NOTE: `crun` is performing a similar check that would yield exit code
127. With this change, however, Podman performs the check and yields
exit code 126. Since this is specific to `crun`, I do not consider it
to be a breaking change of Podman.
Fixes: #9040
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
podman-remote search had some FIXMEs in tests that were failing.
So I reworked the search handler to use the local abi. This
means the podman search and podman-remote search will use the
same functions.
While doing this, I noticed we were just outputing errors via
logrus.Error rather then returning them, which works ok for
podman but the messages get lost on podman-remote. Changed
the code to actually return the error messages to the caller.
This allows us to turn on the remaining podman-remote FIXME
tests.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --default-mounts-file path was not being handled in
podman build. This will enable it to use for testing.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- stop: test --all and --ignore (#9051)
- build: test /run/secrets (#8679, but see below)
- sensitive mount points: deal with 'stat' failures
- selinux: confirm useful diagnostics on unknown labels (#8946)
The 'build' test is intended as a fix for #8679, in which
'podman build' does not mount secrets from mounts.conf.
Unfortunately, as of this writing, 'podman build' does
not pass the --default-mounts-file option to buildah,
so there's no reasonable way to test this path. Still,
we can at least confirm /run/secrets on 'podman run'.
The /sys thing is related to #8949: RHEL8, rootless, cgroups v1.
It's just a workaround to get gating tests to pass on RHEL.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Currently podman implements --override-arch and --overide-os
But Podman has made these aliases for --arch and --os. No
reason to have to specify --override, since it is clear what
the user intends.
Currently if the user specifies an --override-arch field but the
image was previously pulled for a different Arch, podman run uses
the different arch. This PR also fixes this issue.
Fixes: https://github.com/containers/podman/issues/8001
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when doing a network creation, the dnsname plugin should be disabled
when the --internal bool is set. a warning is displayed if this
happens and docs are updated.
Signed-off-by: baude <bbaude@redhat.com>
if a CNI network is added to the container, use the IP address in that
network instead of hard-coding the slirp4netns default.
commit 5e65f0ba30 introduced this
regression.
Closes: https://github.com/containers/podman/issues/9065
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
docker-client is a library written in Java and used in Eclipse to
speak with Docker API. When endpoint /images/search is called,
HTTP header attribute X-Registry-Auth has value "null". This is for
sure wrong but Docker tolerates this value, and call works. With this
patch call works also with Podman. #7857
Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
Just running through the tests that have SkipIfRemote("FIXME")
and attempting to not skip. Found these tests now work.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
set the source IP to the slirp4netns address instead of 127.0.0.1 when
using rootlesskit.
Closes: https://github.com/containers/podman/issues/5138
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Unlike the container storage all e2e test are using the same cni
config directory. This causes problems if the network name already
exists. Using random names will make the second run pass even if the
first failed. This is only done to prevent full CI failures.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
If the container create command contains an argument with double
curly braces the golang template parsing can fail since it tries
to interpret the value as variable. To fix this change the default
delimiter for the internal template to `{{{{`.
Fixes#9034
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
I found several problems with container remove
podman-remote rm --all
Was not handled
podman-remote rm --ignore
Was not handled
Return better errors when attempting to remove an --external container.
Currently we return the container does not exists, as opposed to container
is an external container that is being used.
This patch also consolidates the tunnel code to use the same code for
removing the container, as the local API, removing duplication of code
and potential problems.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When doing a podman images, manifests lists look just like images, so
it is logical that users would assume that they can just podman push them
to a registry. The problem is we throw out weird errors when this happens
and users need to somehow figure out this is a manifest list rather then
an image, and frankly the user will not understand the difference.
This PR will make podman push just do the right thing, by failing over and
attempting to push the manifest if it fails to push the image.
Fix up handling of manifest push
Protocol should bring back a digest string, which can either be
printed or stored in a file.
We should not reimplement the manifest push setup code in the tunnel
code but take advantage of the api path, to make sure remote and local
work the same way.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
partially revert 95c45773d7
restrict the cases where /sys is bind mounted from the host.
The heuristic doesn't detect all the cases where the bind mount is not
necessary, but it is an improvement on the previous version where /sys
was always bind mounted for rootless containers unless --net none was
specified.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Basic theory: We remove the container, but *only from the DB*.
We leave it in c/storage, we leave the lock allocated, we leave
it running (if it is). Then we create an identical container with
an altered name, and add that back to the database. Theoretically
we now have a renamed container.
The advantage of this approach is that it doesn't just apply to
rename - we can use this to make *any* configuration change to a
container that does not alter its container ID.
Potential problems are numerous. This process is *THOROUGHLY*
non-atomic at present - if you `kill -9` Podman mid-rename things
will be in a bad place, for example. Also, we can't rename
containers that can't be removed normally - IE, containers with
dependencies (pod infra containers, for example).
The largest potential improvement will be to move the majority of
the work into the DB, with a `RecreateContainer()` method - that
will add atomicity, and let us remove the container without
worrying about depencies and similar issues.
Potential problems: long-running processes that edit the DB and
may have an older version of the configuration around. Most
notable example is `podman run --rm` - the removal command needed
to be manually edited to avoid this one. This begins to get at
the heart of me not wanting to do this in the first place...
This provides CLI and API implementations for frontend, but no
tunnel implementation. It will be added in a future release (just
held back for time now - we need this in 3.0 and are running low
on time).
This is honestly kind of horrifying, but I think it will work.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This involves a new test binary (a basic implementation of the
volume plugin protocol) and a new image on quay.io (Containerfile
to produce it and all sources located in this commit). The image
is used to run a containerized plugin we can test against.
Signed-off-by: Matthew Heon <mheon@redhat.com>
OpenShift Merge Robot
Valentin Rothberg
Daniel J Walsh
Paul Holzinger
baude
Matthew Heon
Ed Santiago
Giuseppe Scrivano
Milivoje Legenovic