* Make sure that all vendored dependencies are in sync with the code and
the vendor.conf by running `make vendor` with a follow-up status check
of the git tree.
* Vendor ginkgo and gomega to include the test dependencies.
Signed-off-by: Chris Evic <cevich@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The sig-proxy test creates a FIFO, runs podman with actions
that write to it, then tries reading from the FIFO.
Opening a FIFO for read or write blocks until the other end is
opened for the corresponding write/read. If our podman process
fails for any reason, the test's FIFO open will hang forever.
Solution: open with O_NONBLOCK.
Signed-off-by: Ed Santiago <santiago@redhat.com>
We are missing the equivalence of the docker system commands
This patch set adds `podman system prune`
and `podman system info`
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
addition of import and export for the podman-remote client. This includes
the ability to send and receive files between the remote-client and the
"podman" host using an upgraded varlink connection.
Signed-off-by: baude <bbaude@redhat.com>
For whatever reason, this specific test frequently fails on Ubuntu with
an error similar to:
```
Timed out after 1.000s.
Expected process to exit. It did not.
/var/tmp/go/src/github.com/containers/libpod/test/e2e/info_test.go:38
```
Ths changes alters the test behavior to use the `defaultWaitTimeout`
value (so 90 vs former 60 seconds) only for this test.
Signed-off-by: Chris Evich <cevich@redhat.com>
The toolbox project would benefit from a few changes to more closely
resembe the original atomic cli project. Changes made are:
* only pull image for container runlabel if the label exists in the image
* if a container image does not have the desired label, exit with non-zero
Signed-off-by: baude <bbaude@redhat.com>
we now, by default, only prune dangling images. if --all is passed, we
prune dangling images AND images that do not have an associated containers.
also went ahead and enabled the podman-remote image prune side of things.
Fixes: #2192
Signed-off-by: baude <bbaude@redhat.com>
initial enablement of podman-remote version. includes add a APIVersion const
that will allow us to check compatibility between host/client when connections
are made.
also added client related information to podman info.
Signed-off-by: baude <bbaude@redhat.com>
Masking main level, image, and container commands that are not yet
implemented for the remote client. As each command is completed, be
sure to unmask it.
Also, masking podman command line switches that are not applicable
to the remote client.
Signed-off-by: baude <bbaude@redhat.com>
When using --pid=host don't try to cover /proc paths, as they are
coming from the /proc bind mounted from the host.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
Restoring a container from a checkpoint should give the container the
same IP as before checkpointing. This adds a test to make sure the IP
stays the same.
Signed-off-by: Adrian Reber <areber@redhat.com>
Add support for executing an init binary as PID 1 in a container to
forward signals and reap processes. When the `--init` flag is set for
podman-create or podman-run, the init binary is bind-mounted to
`/dev/init` in the container and "/dev/init --" is prepended to the
container's command.
The default base path of the container-init binary is `/usr/libexec/podman`
while the default binary is catatonit [1]. This default can be changed
permanently via the `init_path` field in the `libpod.conf` configuration
file (which is recommended for packaging) or temporarily via the
`--init-path` flag of podman-create and podman-run.
[1] https://github.com/openSUSE/catatonitFixes: #1670
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Now that the correct distribution CRIU packages are installed the
checkpoint/restore tests should no longer fail. This re-enables the
disabled tests on Fedora.
Signed-off-by: Adrian Reber <areber@redhat.com>
We had two problems with /dev/shm, first, you mount the
container read/only then /dev/shm was mounted read/only.
This is a bug a tmpfs directory should be read/write within
a read-only container.
The second problem is we were ignoring users mounted /dev/shm
from the host.
If user specified
podman run -d -v /dev/shm:/dev/shm ...
We were dropping this mount and still using the internal mount.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when testing rootless containers, it is more reliable to stop
a container with a zero timeout than kill a container. We made
this change in non-rootless tests as well. When IO or CPU are
taxed, it avoids a situation where the kill signal is sent but the
container has not been able to update its status when a subsequent
action occurs.
Signed-off-by: baude <bbaude@redhat.com>
Display the trust policy of the host system. The trust policy is stored in the /etc/containers/policy.json file and defines a scope of registries or repositories.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Since the most recent TWO versions of Fedora are officially supported
upstream, both need to be tested. Implement the concept of a 'prior'
Fedora release in both base-image and cache-image production. Utilize
the produced cache-image to test libpod. Remove F28 testing from PAPR.
Much thanks to @baude @giuseppe for help with this.
Signed-off-by: Chris Evich <cevich@redhat.com>
Add functional tests to start a container from systemd.
This patch will:
- create a systemd unit file to start redis container
- create the container with `podman create`
- enable the service
- start the container with systemd
- check that the service is actually running
Signed-off-by: Emilien Macchi <emilien@redhat.com>
when starting or running a container that has --rm, if the starting
container fails (like due to an invalid command), the container should
get removed.
Resolves: #1985
Signed-off-by: baude <bbaude@redhat.com>
With rootless containers we cannot really restart an existing container
as we would need to join the mount namespace as well to be able to reuse
the storage, so ensure the container is stopped first.
Closes: https://github.com/containers/libpod/issues/1965
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Allow user to prune unused/unnamed images, the layer images from building,
via podman rmi --prune.
Allow user to prune stopped/exiuted containers via podman rm --prune.
This should resolve#1910
Signed-off-by: baude <bbaude@redhat.com>
when a user specifies --pod to podman create|run, we should create that pod
automatically. the port bindings from the container are then inherited by
the infra container. this signicantly improves the workflow of running
containers inside pods with podman. the user is still encouraged to use
podman pod create to have more granular control of the pod create options.
Signed-off-by: baude <bbaude@redhat.com>
Part of the motivation for 800eb863 (Hooks supports two directories,
process default and override, 2018-09-17, #1487) was [1]:
> We only use this for override. The reason this was caught is people
> are trying to get hooks to work with CoreOS. You are not allowed to
> write to /usr/share... on CoreOS, so they wanted podman to also look
> at /etc, where users and third parties can write.
But we'd also been disabling hooks completely for rootless users. And
even for root users, the override logic was tricky when folks actually
had content in both directories. For example, if you wanted to
disable a hook from the default directory, you'd have to add a no-op
hook to the override directory.
Also, the previous implementation failed to handle the case where
there hooks defined in the override directory but the default
directory did not exist:
$ podman version
Version: 0.11.2-dev
Go Version: go1.10.3
Git Commit: "6df7409cb5a41c710164c42ed35e33b28f3f7214"
Built: Sun Dec 2 21:30:06 2018
OS/Arch: linux/amd64
$ ls -l /etc/containers/oci/hooks.d/test.json
-rw-r--r--. 1 root root 184 Dec 2 16:27 /etc/containers/oci/hooks.d/test.json
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:31:19-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:31:19-08:00" level=warning msg="failed to load hooks: {}%!(EXTRA *os.PathError=open /usr/share/containers/oci/hooks.d: no such file or directory)"
With this commit:
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /etc/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="added hook /etc/containers/oci/hooks.d/test.json"
time="2018-12-02T21:33:07-08:00" level=debug msg="hook test.json matched; adding to stages [prestart]"
time="2018-12-02T21:33:07-08:00" level=warning msg="implicit hook directories are deprecated; set --hooks-dir="/etc/containers/oci/hooks.d" explicitly to continue to load hooks from this directory"
time="2018-12-02T21:33:07-08:00" level=error msg="container create failed: container_linux.go:336: starting container process caused "process_linux.go:399: container init caused \"process_linux.go:382: running prestart hook 0 caused \\\"error running hook: exit status 1, stdout: , stderr: oh, noes!\\\\n\\\"\""
(I'd setup the hook to error out). You can see that it's silenly
ignoring the ENOENT for /usr/share/containers/oci/hooks.d and
continuing on to load hooks from /etc/containers/oci/hooks.d.
When it loads the hook, it also logs a warning-level message
suggesting that callers explicitly configure their hook directories.
That will help consumers migrate, so we can drop the implicit hook
directories in some future release. When folks *do* explicitly
configure hook directories (via the newly-public --hooks-dir and
hooks_dir options), we error out if they're missing:
$ podman --hooks-dir /does/not/exist run --rm docker.io/library/alpine echo 'successful container'
error setting up OCI Hooks: open /does/not/exist: no such file or directory
I've dropped the trailing "path" from the old, hidden --hooks-dir-path
and hooks_dir_path because I think "dir(ectory)" is already enough
context for "we expect a path argument". I consider this name change
non-breaking because the old forms were undocumented.
Coming back to rootless users, I've enabled hooks now. I expect they
were previously disabled because users had no way to avoid
/usr/share/containers/oci/hooks.d which might contain hooks that
required root permissions. But now rootless users will have to
explicitly configure hook directories, and since their default config
is from ~/.config/containers/libpod.conf, it's a misconfiguration if
it contains hooks_dir entries which point at directories with hooks
that require root access. We error out so they can fix their
libpod.conf.
[1]: https://github.com/containers/libpod/pull/1487#discussion_r218149355
Signed-off-by: W. Trevor King <wking@tremily.us>
like containers and images, users would benefit from being able to check
if a pod exists in local storage. if the pod exists, the return code is 0.
if the pod does not exists, the return code is 1. Any other return code
indicates a real errors, such as permissions or runtime.
Signed-off-by: baude <bbaude@redhat.com>
We regressed on this at some point. Adding a new test should help
ensure that doesn't happen again.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
The conmon exit command is running inside of a namespace where the
process is running with uid=0. When it launches again podman for the
cleanup, podman is not running in rootless mode as the uid=0.
Export some more env variables to tell podman we are in rootless
mode.
Closes: https://github.com/containers/libpod/issues/1859
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This adds checkpoint/restore test cases for the newly added options
* --leave-running
* --tcp-established
* --all
* --latest
Signed-off-by: Adrian Reber <areber@redhat.com>
In some test env, mount with shared options is not included relatime
in the mountinfo file. So remove this from the test case.
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
Add an exists subcommand to podman container and podman image that allows
users to verify the existence of a container or image by ID or name. The return
code can be 0 (success), 1 (failed to find), or 125 (failed to work with runtime).
Issue #1845
Signed-off-by: baude <bbaude@redhat.com>
Set the root propagation based on the properties of volumes and default
mounts. To remain compatibility, follow the semantics of Docker. If a
volume is shared, keep the root propagation shared which works for slave
and private volumes too. For slave volumes, it can either be shared or
rshared. Do not change the root propagation for private volumes and
stick with the default.
Fixes: #1834
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
we need to allow users to expose ports to the host for the purposes
of networking, like a webserver. the port exposure must be done at
the time the pod is created.
strictly speaking, the port exposure occurs on the infra container.
Signed-off-by: baude <bbaude@redhat.com>
The tests can be filter by --focus and --skip to fit different test
target. Also be able to set global options and cmd options by export
it to ENV to fit different test matrix.
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
We now can remove a paused container by sending it a kill signal while it
is paused. We then unpause the container and it is immediately killed.
Also, reworked how the parallelWorker results are handled to provide a
more consistent approach to how each subcommand implements it. It also
fixes a bug where if one container errors, the error message is duplicated
when printed out.
Signed-off-by: baude <bbaude@redhat.com>
When running integration tests in our CI, we observe a problem where paused containers
are not able to be stopped; and therefore cannot be cleaned up. This leaves dangling mounts
and sometimes zombied conmon processes.
Signed-off-by: baude <bbaude@redhat.com>
Operations like kill, pause, and unpause -- which can operation on one or
more containers -- can greatly benefit from parallizing its main job (eq kill).
In the case of pauseand unpause, an --all option as was added. pause --all will
pause all **running** containers. And unpause --all will unpause all **paused**
containers.
Signed-off-by: baude <bbaude@redhat.com>
When attempting to restart many containers, we can benefit from making
the restarts parallel. For convenience, two new options are added:
--all attempts to restart all containers
--run-only when used with --all will attempt to restart only running containers
Signed-off-by: baude <bbaude@redhat.com>
this pr allows the libpod integration suite to pass on the
ppc64le architecture. in some cases, I had to skip tests.
eventually, these tests need to be fixed so that they properly pass. of
note for this PR is:
* changed the ppc64le default container os to be overlay (over vfs) as vfs seems non-performant on ppc64le
* still run vfs for rootless operations
* some images names for ppc64le had to change because they don't exist.
* this should help getting our CI to run on the platform
Signed-off-by: baude <bbaude@redhat.com>
As discussed [1], the runlabel command should execute any command
specified in a label. The reasoning behind is that we cannot restrict
which options are passed to Podman which thereby has full access to the
host (runlabels must be used with care).
With the updated semantics, runlabel will substitute the commands with a
basepath equal to "docker" or "podman" with "/proc/self/exe", and
otherwise leave the command unchanged to execute any other command on
the host.
[1] https://github.com/containers/libpod/pull/1607#issuecomment-428321382
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
when doing stats -a|--all, if you have non-running containers, we should
not error on not being able to get information like PID, etc on them.
Signed-off-by: baude <bbaude@redhat.com>
If someone runs podman as a user (uid) that is not defined in the container
we want generate a passwd file so that getpwuid() will work inside of container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
unfortunately the papr CI system cannot test ubuntu as a VM; therefore,
this PR still keeps travis. but it does include fixes that will be required
for running on modern versions of ubuntu.
Signed-off-by: baude <bbaude@redhat.com>
Execute the command as described by a container image. The value of the label is processed
into a command by:
1. Ensuring the first argument of the command is podman.
2. Substituting any variables with those defined by the environment or otherwise.
If no label exists in the container image, nothing is done.
podman container runlabel LABEL IMAGE extra_args
Signed-off-by: baude <bbaude@redhat.com>
In cases where the image name is more complex like:
quay/baude/alpine_nginx:latest and is not from the docker
registry, we need to be able to run the image by its shortname
such as baude/alpine_nginx. The same goes when the image is
not from a registry but instead has the localhost repository.
This resolves buildah issue #1034
Signed-off-by: baude <bbaude@redhat.com>
This PR makes several key changes to our CI testing. Firstly, we now test
podman on fedora 28, fedora 29, and centos VMS (rather than containers). Any
of these that having failing tests are not marked as required yet. We
still preserve the podman in podman and podman in docker tests as well and
they are marked as required.
The lint and validate work is now done on a openshift container. We also
removed the rpm verification on papr and perform this test under the "images"
test on the openshift ci.
This PR exposes integration test fails on some of our OSs. My expectation is we
will fix those in additional PRs and as they are fixed, we should be flipping
the boolean bit to required.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1492
Approved by: mheon
We seem to be having a few flakes on namespace sharing.
Adding this test to make sure sharing with the host is working correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1485
Approved by: mheon
Adds functionality to search registries implementing the v2
endpoint with an empty query, that is the results will be
all the available images on the registries.
If this is tried with a v1 registry an error will occur.
To search a whole registry, there needs to be a trailing slash
at the end, i.e `podman search registry.fedoraproject.org/`.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Closes: #1444
Approved by: rhatdan
when running podman's integration tests, we need to be able to understand
our environment because the podman command will differ as will the results.
there is no 100% way to know if we are in a container, but using a combination
of container= and checking /proc seemed reasonable for our test suite. non of this
code is run in podman proper.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1441
Approved by: mheon
This is an incomplete fix, as it would be best for the libpod library to be in charge of coordinating the container's dependencies on the infra container. A TODO was left as such. UTS is a special case, because the docker library that namespace handling is based off of doesn't recognize a UTS based on another container as valid, despite the library being able to handle it correctly. Thus, it is left in the old way.
Signed-off-by: haircommander <pehunt@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1347
Approved by: mheon
We should be sharing cgroups namespace by default in pods
uts namespace sharing was broken in pods.
Create a new libpod/pkg/namespaces for handling of namespace fields
in containers
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1418
Approved by: mheon
This bash script is meant to compliment the podman baseline
test script. It primarily focuses on exercising the common
actions of pods.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1421
Approved by: rhatdan
This tests fails a lot, I think because of a race condition. Changing to
just make sure the inode of the /dev/shm on the host is the same as inside
the container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1420
Approved by: mheon
Small amount of clean up on the baseline script to handle failing
on error. I also added an option to not use docker at all for platoforms
where docker cannot be installed.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1411
Approved by: rhatdan
When running podman rm -a on a storage where no images exist,
the exit code should NOT be non-zero.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1402
Approved by: rhatdan
change the tests to use chroot to set a numeric UID/GID.
Go syscall.Credential doesn't change the effective UID/GID of the
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
also refactor the rootless_test.go to facilitate running a test in a
rootless context.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1372
Approved by: mheon
join the user namespace used to create the container so that psgo can
work in the same way as with root containers.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1371
Approved by: rhatdan
Docker expects multiple filters to be passed with multiple uses
of the --filter flag (e.g. --filter=label=a=b --filter=label=c=d)
and not a single comma-separated list of filters as we expected.
Convert to the Docker format, and make some small cleanups to our
handling of filters along the way.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1345
Approved by: umohnani8
The OCI runtime might use the cgroups to see what PIDs
are inside the container, but that doesn't work with rootless
containers.
Closes: https://github.com/containers/libpod/issues/1337
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1331
Approved by: rhatdan
Manage the case where the main process of the container creates and
joins a new user namespace.
In this case we want to join only the first child in the new
hierarchy, which is the user namespace that was used to create the
container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1331
Approved by: rhatdan
We cannot re-exec into a new user namespace to gain privileges and
access an existing as the new namespace is not the owner of the
existing container.
"unshare" is used to join the user namespace of the target container.
The current implementation assumes that the main process of the
container didn't create a new user namespace.
Since in the setup phase we are not running with euid=0, we must skip
the setup for containers/storage.
Closes: https://github.com/containers/libpod/issues/1329
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1331
Approved by: rhatdan
When in rootless mode it's not possible to load profiles or
check which profiles are loaded.
Added a few baseline tests to check all possible cases.
Signed-off-by: Marco Vedovati <mvedovati@suse.com>
Closes: #1250
Approved by: mheon
Also it fix the issue of exposing both tc/udp port even if
only one proto specified.
Signed-off-by: Kunal Kushwaha <kushwaha_kunal_v7@lab.ntt.co.jp>
Closes: #1325
Approved by: mheon
As well as small style corrections, update pod_top_test to use CreatePod, and move handling of adding a container to the pod's namespace from container_internal_linux to libpod/option.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
Using the vendored changes from psgo, incorporate JoinNamespaceAndProcessInfoByPids to get process information for each pid namespace of running containers in the pod. Also added a man page, and tests.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1298
Approved by: mheon
We need a useradd binary in the container for this test, so swap
from Alpine to fedora-minimal.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1315
Approved by: vrothberg
Devices are supposed to be able to be passed in via the form of
--device /dev/foo
--device /dev/foo:/dev/bar
--device /dev/foo:rwm
--device /dev/foo:/dev/bar:rwm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1299
Approved by: umohnani8
Do not set any hostname value in the OCI configuration when --uts=host
is used and the user didn't specify any value. This prevents an error
from the OCI runtime as it cannot set the hostname without a new UTS
namespace.
Differently, the HOSTNAME environment variable is always set. When
--uts=host is used, HOSTNAME gets the value from the host.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1280
Approved by: baude
Need to get some small changes into libpod to pull back into buildah
to complete buildah transition.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1270
Approved by: mheon
Hostname should be set to the hosts hostname when network is none.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1274
Approved by: giuseppe
...and some naming decisions.
This change ensures podman save doesn't incorrectly prepend localhost when saving an image.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1140
Approved by: rhatdan
This adds support for Dockerfile.in and fixes some limits
issues on docker build
Also adds support for podman build to read Dockerfile from stdin.
cat Dockerfile | podman build -f - .
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1209
Approved by: mheon
We should not be using the test systems registries.conf file for integration
tests. We should always use a constructed file created specifically for the
integration tests or we stand to have unpredictable results. The beforeTest
function now sets an environment variable pointing to a registries.conf file
in the test's tempdir. That file will container docker.io as a default.
The afterTest function then clears the environment variable.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1197
Approved by: rhatdan
This is the second round of performance improvements for out
integration tests.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1190
Approved by: rhatdan
due to how cstorage is designed, we were spewing thousands of fds when
we restored cached images causing unwieldy rlimits. we now use podman
load to restore the images thereby not tripping the issue.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1188
Approved by: baude
The auto decompression functionality was already vendored in
with containers/image. Adding a test for it.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1137
Approved by: rhatdan
Stop all containers with a zero timeout prior to trying to rm -fa. This results
in quicker teardown times by not waiting for timeouts.
Also, with wait tests, no need to wait the full 10 second sleep. 1 will do.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1181
Approved by: rhatdan
Because our tests are getting so long, we want to be able to audit which tests are taking
the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore
should be auditable.
Also, make speed improvements to tests by making sure we only unpack caches images that
actually get used.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1178
Approved by: mheon
If an image is created from another and it is deleted,
only delete the actual image and not the parent images
if the parent images have names/references.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1174
Approved by: mheon
Added Pause() and Unpause() to libpod/pod.go
Added man pages, tests and completions
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1126
Approved by: rhatdan
(make localunit) complains about the unbuildable subpackage; silence that.
Actually, I can't find any user of checkseccomp in this repo; maybe
it is entirely unused?
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Closes: #1115
Approved by: rhatdan
If more than one volume was mounted using the --volume flag in
podman run, the second and onwards volumes were picking up options
of the previous volume mounts defined. Found out that the options were
not be cleared out after every volume was parsed.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1142
Approved by: mheon
As well as added tests, man pages, and completions.
Also reformatted and refactored a couple of other small things in the other pod commands.
Signed-off-by: haircommander <pehunt@redhat.com>
Use github.com/containers/psgo instead of execing `ps (1)`. The psgo
library enables a much more flexible interface with respect to which
data to be printed (e.g., capabilities, seccomp mode, PID, PCPU, etc.)
while the output can be parsed reliably. The library does not use
ps (1) but parses /proc and /dev instead. To list the processes of a
given container, psgo will join the mount namespace of the given
container and extract all data from there.
Notice that this commit breaks compatibility with docker-top.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1113
Approved by: rhatdan
Bind all the specified TCP and UDP ports so that another process
cannot reuse them. The fd of the listener is then leaked into conmon
so that the socket is kept busy until the container exits.
Closes: https://github.com/projectatomic/libpod/issues/210
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1100
Approved by: mheon
Most images won't work without multiple ids/gids. Error out
immediately if there are no multiple ids available.
The error code when the user is not present in /etc/sub{g,u}id looks
like:
$ bin/podman run --rm -ti alpine echo hello
ERRO[0000] No subuid ranges found for user "gscrivano"
Closes: https://github.com/projectatomic/libpod/issues/1087
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1097
Approved by: rhatdan
I don't know how the previous test was succeeding, as we never
actually fetched the sizes to sort with. The test now does.
Signed-off-by: Matthew Heon <mheon@redhat.com>
when pulling an image that includes a sha such as:
centos/nginx-112-centos7@sha256:42330f7f29ba1ad67819f4ff3ae2472f62de13a827a74736a5098728462212e7
the final image name in libpod should not contain portions of the sha itself nor the sha
identifier. and like docker, we provide a 'none' tag as well.
this should fix#877
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1085
Approved by: mheon
podman rmi was deleting an image even if it was a parent of
another image. This fix just untags the image instead.
This also fixes podman rmi to remove intermediate images of
an image when the image is removed.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1055
Approved by: mheon
Add the actual argument, not the one we're looking for when searching
the to-be-translated short-opt string. Otherwise, we're likely to hit
an infinite loop.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1066
Approved by: rhatdan
podman now supports --volumes-from flag, which allows users
to add all the volumes an existing container has to a new one.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #931
Approved by: mheon
Building our own image to test built-in volume and user
instead of using the mariadb one.
Solves timeout issue in travis tests.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1044
Approved by: mheon
Vendor an updated version of urfave/cli to fix the parsing of short
options. Until the fix is merged upstream, vendor the code from
github.com/vrothberg/cli containing both, the latest urfave/cli and
the bug fix.
Fixes: #714
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1046
Approved by: rhatdan
The destination path of the built-in volume was not being created
but a relabel was being attempted on it, this was causing issues
with all images that have built-in volumes.
This patch fixes that and ensures the destination volume path
is created.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1026
Approved by: mheon
When we run containers in detach mode, nothing cleans up the network stack or
the mount points. This patch will tell conmon to execute the cleanup code when
the container exits.
It can also be called to attempt to cleanup previously running containers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #942
Approved by: mheon
Instead of setting the --registry flag to search a single registry,
prefix the registry before the image name in the input, an example is
`podman search registry.fedoraproject.org/fedora` and this will search for
the fedora image in only registry.fedoraproject.org.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1011
Approved by: rhatdan
Also podman ps now allows user to only output size of root FS, changed language of images and ps --sort to be by "created" as opposed to "time", and refactored the way templates are created (converted from psJSONParams type).
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #948
Approved by: rhatdan
podman images will not show intermediate images by default.
To view all images, including intermediate images created during
a build, use the --all flag.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #947
Approved by: rhatdan
Make the output of top tabular to be compatible with Docker. Please
note, that any user-input for `GetContainerPidInformation(...)` will be
ignored until we have found a way to generically and reliably parse ps-1
output or until there is a go-lib to extract all the data from /proc in
a ps-1 compatible fashion.
Fixes: #458
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #939
Approved by: rhatdan
podman run command screws up we should get 125
podman run command succeeds but command in container fails to exec 126
podman run command succeeds but command exits with non 0 exit code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #921
Approved by: TomSweeneyRedHat
Add following test cases for security-opt:
- Check default selinux value
- Disable security options in container
- Setup selinux type in security-opt
- Disable seccomp protection
- Configure custom seccomp.json
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
Closes: #837
Approved by: rhatdan
Use function in opencontainers/selinux/go-selinux to check the
selinux status in our test.
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
Closes: #837
Approved by: rhatdan
Also add annotations from the image the container was created
from.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #886
Approved by: rhatdan
Currently we are giving all caps to users when running with podman run --user,
They should get none by default. If the command line includes --cap-add, then
we need to run with those capabilties. Similarly we need to drop caps from
bounding set, if user specifies --cap-drop
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #851
Approved by: mheon
The docker-archive tar files can have multiple tags for the same
image stored in it. Load pulls all the tags found in the archive
when loading a tar file. Save can oush multiple tags of the same
image to a tar archive.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #819
Approved by: rhatdan
When we're given a numeric --user value, default to GID 0 if the numeric
ID doesn't correspond to a user entry in /etc/passwd that can provide us
with the user's primary group ID.
Make sure that GetAdditionalGroupsForUser() returns wrapped errors.
Also test various user:group forms.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Closes: #728
Approved by: mheon
If the user uses the image ID when saving to either docker-archive
or oci-archive, then do not save a reference in the manifest/index.json.
If the user chooses to push without an image reference, i.e <transport>:<path>
it should be valid and succeed.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #782
Approved by: rhatdan
Until we get Systemd cgroup manager working, this will
cause a validation error.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #507
Approved by: baude
If the user does not provide a host port when adding -p to create/run, podman should inject an available random port.
podman run -p 80 .... podman should assign a random port to the host and expose the container port 80 to it
Signed-off-by: baude <bbaude@redhat.com>
Closes: #703
Approved by: rhatdan
when performing a container commit, we should not add the default list of volumes
for a container to the resulting image. it will cause the resulting image to crash
when run subsequently.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #699
Approved by: mheon
file names for podman load, save, export, and import cannot
contain ":" in them. It is a reserved character for parsing
filenames.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #694
Approved by: rhatdan
Vendor in buildah and use as much of commit and bug as possible for podman
build and commit.
Resolves#586
Signed-off-by: baude <bbaude@redhat.com>
Closes: #681
Approved by: mheon
OpenShift Merge Robot
Valentin Rothberg
Ed Santiago
Daniel J Walsh
baude
Giuseppe Scrivano
Chris Evich
Harshal Patil
Jhon Honce
Adrian Reber
Debarshi Ray
Qi Wang
TomSweeneyRedHat
Emilien Macchi
Matthew Heon
Miloslav Trmač
Urvashi Mohnani
W. Trevor King
Yiqiao Pu
Matthew Heon
Valentin Rothberg
Marco Vedovati
Kunal Kushwaha
haircommander
Nalin Dahyabhai