Currently we deadlock in the slirp4netns setup code as we try to
configure an non exissting netns. The problem happens because we tear
down the netns in the userns case correctly since commit bbd6281ecc but
that introduces this slirp4netns problem. The code does a proper new
network setup later so we should only use the short cut when not in a
userns.
Fixes#21477
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman v5 will not support cgroups-v1. This commit will print a warning
if it detects a cgroups-v1 system. The warning can be hidden by setting
envvar `PODMAN_CGROUPSV1_WARNING`.
This warning is patched out for RHEL 9 builds as cgroups-v1 will still
be supported on RHEL 9 systems.
Resolves: https://issues.redhat.com/browse/RUN-1957
[NO NEW TESTS NEEDED]
Co-authored-by: Ed Santiago <santiago@redhat.com>
Co-authored-by: Sascha Grunert <sgrunert@redhat.com>
Co-authored-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Lokesh Mandvekar <lsm5@redhat.com>
Just like all the other inspect commands that accept multiple args we
should just make podman pod inspect output a json array.
This makes the code more consistent and removes the extra workaround
which was needed before to support this.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
CNI is deprecated and is build tagged out for 5.0. Don't test it in our CI.
This commit also disables upgrade tests for now - those need more work since the old version of Podman only uses CNI. Upgrade tests will be re-vamped in a later commit.
Signed-off-by: Ashley Cui <acui@redhat.com>
The pasta network mode has been added in podman v4.4 and this causes a
conflict with named networks that could also be called "pasta". To not
break anything we had special logic to prefer the named network over the
network mode. Now with 5.0 we can break this and remove this awkward
special handling from the code.
Containers created with 4.X that use a named network pasta will also
continue to work fine, this chnage will only effect the creation of new
containers with a named network pasta and instead always used the
network mode pasta. We now also block the creation of networks with the
name "pasta".
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The current field separator comma of the inspect annotation conflicts with the mount options of --volumes-from as the mount options itself can be comma separated.
Signed-off-by: Vikas Goel <vikas.goel@gmail.com>
From https://github.com/containers/automation_images/pull/325
Major change: netavark and aardvark are now included in prior-fedora,
so CNI can be fully eliminated from CI (#21410)
FIXME FIXME FIXME: skip two e2e tests, waiting for new netavark
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix the way we set skipTLSVerify on the client side
to ensure that the push stage in farm build takes into
account the configuration in the farm node's registries.conf
when the user hasn't set it on the client side.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Podman Desktop [1] is looking into improving the user experience which
requires to know the source of an image. Consider the user triggers an
image pull and Podman Desktop wants to figure out whether the image name
refers to a Red Hat registry, for instance, to prompt installing the RH
auth extension.
Since the input values of images may be a short name [2], Podman Desktop
has no means to figure out the (potential) source of the image. Hence,
add a new `/resolve` endpoint to allow external callers to figure out
the (potential) fully-qualified image name of a given value.
With the new endpoint, Podman Desktop can ask Podman directly to resolve
the image name and then make an informed decision whether to prompt the
user to perform certain tasks or not. This for sure can also be used
for any other registry (e.g., Quay, Docker Hub).
[1] https://github.com/containers/podman-desktop/issues/5771
[2] https://www.redhat.com/sysadmin/container-image-short-names
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
We now no longer write containers.conf, instead system connections and
farms are written to a new file called podman-connections.conf.
This is a major rework and I had to change a lot of things to get this
to compile again with my c/common changes.
It is a breaking change for users as connections/farms added before this
commit can now no longer be removed or modified directly. However because
the logic keeps reading from containers.conf the old connections can
still be used to connect to a remote host.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When inspecting a container that does not define any health check, the health field should return nil. This matches docker behavior.
Signed-off-by: Ashley Cui <acui@redhat.com>
SpecGen is our primary container creation abstraction, and is
used to connect our CLI to the Libpod container creation backend.
Because container creation has a million options (I exaggerate
only slightly), the struct is composed of several other structs,
many of which are quite large.
The core problem is that SpecGen is also an API type - it's used
in remote Podman. There, we have a client and a server, and we
want to respect the server's containers.conf. But how do we tell
what parts of SpecGen were set by the client explicitly, and what
parts were not? If we're not using nullable values, an explicit
empty string and a value never being set are identical - and we
can't tell if it's safe to grab a default from the server's
containers.conf.
Fortunately, we only really need to do this for booleans. An
empty string is sufficient to tell us that a string was unset
(even if the user explicitly gave us an empty string for an
option, filling in a default from the config file is acceptable).
This makes things a lot simpler. My initial attempt at this
changed everything, including strings, and it was far larger and
more painful.
Also, begin the first steps of removing all uses of
containers.conf defaults from client-side. Two are gone entirely,
the rest are marked as remove-when-possible.
[NO NEW TESTS NEEDED] This is just a refactor.
Signed-off-by: Matt Heon <mheon@redhat.com>
Given that we can have multiple image digests,
fix the inspect test to check whether the digest
given matches one of the digests of the image.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Fix the image filter parsing in the common libraries
to follow an AND logic for all filters passed in ensuring
compatibility with Docker behavior.
Also fix the filter parsing on the tunnel side so that we grab
all the filters given by the user and not only the last filter
in the list.
Add tests for the fixes.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
This is one of the breaking changes in Podman 5.0: removing the
ability to create new instances of the old Bolt database. This
does not remove support for the database entirely, as existing
Bolt databases will still be usable, but all new installs will
use SQLite after this point - if Bolt is forced by config, we'll
just error.
We don't have plans to outright remove the Bolt code. If that
were to happen, it'd be Podman 6.0 at least, and a significant
enough change it'd warrant a lot of discussion and planning. We
do intend to start winding down support of BoltDB, though, and
new features may be added only to SQLite from here on.
I have added an escape hatch via an undocumented environment
variable that allows us to continue testing BoltDB in CI (and, if
necessary, locally) but I don't want this to be used for any
purpose except continued testing of the old DB to ensure we don't
break it.
Signed-off-by: Matt Heon <mheon@redhat.com>
Some OCI runtimes (cf. [1]) may tolerate container images that don't
specify an entrypoint even if no entrypoint is given on the command
line. In those cases, it's annoying for the user to have to pass a ""
argument to podman.
If no entrypoint is given, make the behavior the same as if an empty ""
entrypoint was given.
[1] https://github.com/containers/crun-vm
Signed-off-by: Alberto Faria <afaria@redhat.com>
Currently, if the container creation failed with
either run or create and you've used --pod with new:
the pod would be created nonetheless. This change ensures
the pod just created is also cleaned up in case
of container creation failure
Fixes#21228
Signed-off-by: danishprakash <danish.prakash@suse.com>
- #15074 ("subtree_control" flake). The flake is NOT FIXED, I
saw it six months ago on my (non-aarch64) laptop. However,
it looks like the frequent-flake-on-aarch64 bug is resolved.
I've been testing in #17831 and have not seen it. So,
tentatively remove the skip and see what happens.
- Closes: #19407 (broken tar, "duplicates of file paths")
All Fedoras now have a fixed tar. Debian DOES NOT, but
we're handling that in our build-ci-vm code. I.e., the
Debian VM we're using has a working tar even though there's
currently a broken tar out in the wild.
Added distro-integration tag so we can catch future problems
like this in OpenQA.
- Closes: #19471 (brq / blkio / loopbackfs in rawhide)
Bug appears to be fixed in rawhide, at least in the VMs we're
using now.
Added distro-integration tag because this test obviously
relies on other system stuff.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Update farm build to directly push images to a registry
after all the builds are complete on all the nodes.
A manifest list is then created locally and pushed to
the registry as well.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Before this, for some special Podman commands (system reset,
system migrate, system renumber), Podman would create a first
Libpod runtime to do initialization and flag parsing, then stop
that runtime and create an entirely new runtime to perform the
actual task. This is an artifact of the pre-Podman 2.0 days, when
there was almost no indirection between Libpod and the CLI, and
we only used one runtime because we didn't need a second runtime
for flag parsing and basic init.
This system was clunky, and apparently, very buggy. When we
migrated to SQLite, some logic was introduced where we'd select a
different database location based on whether or not Libpod's
StaticDir was manually set - which differed between the first
invocation of Libpod and the second. So we'd get a different
database for some commands (like `system reset`) and they would
not be able to see existing containers, meaning they would not
function properly.
The immediate cause is obviously the SQLite behavior, but I'm
certain there's a lot more baggage hiding behind this multiple
Libpod runtime logic, so let's just refactor it out. It doesn't
make sense, and complicates the code. Instead, make Reset,
Renumber, and Migrate methods of the libpod Runtime. For Reset
and Renumber, we can shut the runtime down afterwards to achieve
the desired effect (no valid runtime after). Then pipe all of
them through the ContainerEngine so cmd/podman can access them.
As part of this, remove the SystemEngine part of pkg/domain. This
was supposed to encompass these "special" commands, but every
command in SystemEngine is actually a ContainerEngine command.
Reset, Renumber, Migrate - they all need a full Libpod and access
to all containers. There's no point to a separate engine if it
just wraps Libpod in the exact same way as ContainerEngine. This
consolidation saves us a bit more code and complexity.
Signed-off-by: Matt Heon <mheon@redhat.com>
Add a wait_for_ready() to one kube-play test, to make sure
container output has made it to the journal.
Probably does not fix#18501, but I think it might fix its
most common presentation.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Cut is a cleaner & more performant api relative to SplitN(_, _, 2) added in go 1.18
Previously applied this refactoring to buildah:
https://github.com/containers/buildah/pull/5239
Signed-off-by: Philip Dubé <philip@peerdb.io>
Let's support --config option by setting environment variable
DOCKER_CONFIG instead of ignoring it for docker compatibility, so
it could be used to locate config.json as authentication file.
Also add a test case for this change, remove the deprecated one.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
- tmpfs + noswap test: requires noswap feature in kernel.
Check for it, and skip if unimplemented. (Root only.
Rootless test works regardless of kernel).
- podman generate systemd tests: always use --files option,
because otherwise the "DEPRECATED" warning gets written
to the systemd unit file.
- kube play tests: yikes. Fix longstanding bugs when checking
for containers running. This revealed a longstanding bug
in one test: multi-pod YAML never actually worked. Fixed now.
- run_podman(): that new check-for-warnings code we added
in #19878, duh, I skipped it on Debian but should've skipped
when *runc*. Do so now and update the comment. Requires
minor surgery to podman_runtime() helper to avoid
infinite recursion.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Back when we introduced ExitCleanly(), we couldn't use it
on Debian because of too many runc bugs. Now, early 2024:
- #11784 has been closed-wontfix, so add a runc special-case
in the specific test that triggers it.
- #11785 seems to have gone away? Treat it as fixed.
- #19552 is languishing, so let's just close-wontfix it too and
add another runc special case.
- and, one new rootless-cgroupsV1 exception for a warning msg
that snuck in recently.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Remove all trailing white spaces from all lines before the line by line
processing
Add test
Exclude the unit file used for the test from whitespace check
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Test "podman start container by systemd" is failed on the system in
which rootless users don't have accessibility to journald. Therefore,
skip the part that reads journal with journalctl.
Signed-off-by: Tsubasa Watanabe <w.tsubasa@fujitsu.com>
Add support for using multiple `Ulimit=` options in `.container` files.
Before, only the last `Ulimit=` option was used in the podman command.
Update podman-systemd.unit.5 docs to reflect this change.
Add `test/e2e/quadlet/ulimit.container` to e2e tests.
Signed-off-by: Paul Nettleton <k9@k9withabone.dev>
* Add BaseHostsFile to container configuration
* Do not copy /etc/hosts file from host when creating a container using Docker API
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
Create a buildah SystemContext from the existing cli arguments
Pass the SystemContext to the build
Add system test
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
A number of tests start a container then immediately run podman stop.
This frequently flakes with:
StopSignal SIGTERM failed to stop [...] in 10 seconds, resorting to SIGKILL
Likely reason: container is still initializing, and its process
has not yet set up its signal handlers.
Solution: if possible (containers running "top"), wait for "Mem:"
to indicate that top is running. If not possible (pods / catatonit),
sleep half a second.
Intended to fix some of the flakes cataloged in #20196 but I'm
leaving that open in case we see more. These are hard to identify
just by looking in the code.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The push binding endpoint wasn't actually writing the
output data to the stream when quiet=false and there
was no push error.
Do not hard code quiet=true anymore, take into account the
user input.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Our test registry (used for login & local registry tests)
was being run using the standard podman tmpdir, hence the
standard podman database, This was then getting clobbered
in the 330-corrupt-images test, which runs "system reset".
We just didn't know this was happening. Until we added
a registry test after the system reset. Oops.
Solution: new helper function podman_isolation_opts()
sets --root, --runroot, *and --tmpdir*. Refactor all
existing --root/--runroot usages. Document.
Next problem: the "network reload" test in 500-networking.bats
did not (could not) know about our registry port, so the
"iptables -F" command reverted that to DROP, so the subsequent
podman-auth in 700-play timed out.
Solution: add a podman-isolated "network reload" to start_registry().
Final problem, because, really, those weren't enough: a BATS
bug where running with --filter-tags would set IFS=',' in setup_suite
which in turn has catastrophic consequences:
https://github.com/bats-core/bats-core/issues/812
See #20966 for details of the failure and further conversation.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Also Support for podman pod ps --format '{{ .Label label }}'
Finally fix support for --format '{{ .Podname }}'
When user specifies .Podname this implies --pod was passed.
Fixes: https://github.com/containers/podman/issues/20957
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If a user did not set an equal sign in the annotation that old code
would panic when accessing the second element in the slice.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option accepts a file path so we should allow commas in it.
Also add tests for --decryption-key
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
New VMs have netavark 1.9, which fixes the "cannot talk to syslog"
warning when running containerized, so we can reenable clean-output
checks in containerized e2e tests
pasta: some new VMs have passt >= 2023-11-10, but f38 does not,
and f39 is unclear (my version extractor could not tell). So
I'm leaving the 20170 skip.
Debian runc now supports umask in *run*, but not *exec*. Even
with runc 1.1.10. And we don't even know what the situation is
on RHEL... so, run the podman-run umask tests but not exec.
Fixes: #19809
Signed-off-by: Ed Santiago <santiago@redhat.com>
Paul Holzinger
Lokesh Mandvekar
Ashley Cui
Vikas Goel
openshift-merge-bot[bot]
Daniel J Walsh
Ed Santiago
Urvashi Mohnani
Valentin Rothberg
Matt Heon
Alexander Larsson
renovate[bot]
Ygal Blum
Alberto Faria
danishprakash
Philip Dubé
Ming Liu
Oleksandr Redko
Alex Jia
Tsubasa Watanabe
Paul Nettleton
Gavin Lam
kaivol
Karuboniru