* Remove duplicate or unused types and constants
* Move all documetation-only models and responses into swagger package
* Remove all unecessary names, go-swagger will determine names from
struct declarations
* Use Libpod suffix to differentiate between compat and libpod models
and responses. Taken from swagger:operation declarations.
* Models and responses that start with lowercase are for swagger use
only while uppercase are used "as is" in the code and swagger comments
* Used gofumpt on new code
```release-note
```
Signed-off-by: Jhon Honce <jhonce@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
This commit removes error message string from utils.Error in pkg/api.
Param was not used inside a function for quite a long time
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves#12173
Signed-off-by: cdoern <cdoern@redhat.com>
'--memory-swappiness=0' used to work. This patch fixes the regression
issue, which was caused by the change of infra container creation
process.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
* Implement API query parameter stream and delay for containers and
pods top endpoints
* Update swagger with breaking changes
* Add python API tests for endpoints
Fixes#12115
Signed-off-by: Jhon Honce <jhonce@redhat.com>
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for pod devices. The device gets added to the infra container and
recreated in all containers that join the pod.
This required a new container config item to keep track of the original device passed in by the user before
the path was parsed into the container device.
Signed-off-by: cdoern <cdoern@redhat.com>
added support for the --volume flag in pods using the new infra container design.
users can specify all volume options they can with regular containers
resolves#10379
Signed-off-by: cdoern <cdoern@redhat.com>
* To aid in debugging log API request and response bodies at trace
level. Events can be correlated using the X-Reference-Id.
* Server now echos X-Reference-Id from client if set, otherwise
generates an unique id.
* Move logic for X-Reference-Id into middleware
* Change uses of Header.Add() to Set() when setting Content-Type
* Log API operations in Apache format using gorilla middleware
* Port server code to use BaseContext and ConnContext
Fixes#10053
Signed-off-by: Jhon Honce <jhonce@redhat.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
- When one or more containers in the Pod reports an error on an operation
report StatusConflict and report the error(s)
- jsoniter type encoding used to marshal error as string using error.Error()
- Update test framework to allow setting any flag when creating pods
- Fix test_resize() result check
Fixes#8865
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Restore correct API endpoint payloads including reclaimed space numbers
* Include tests for API prune endpoints
* Clean up function signatures with unused parameters
* Update swagger for /networks/prune
Fixes#8891
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Make Podman pod operations that do not involve starting
containers (which needs to be done in a specific order) use the
same parallel operation code we use to make `podman stop` on
large numbers of containers fast. We were previously stopping
containers in a pod serially, which could take up to the timeout
(default 15 seconds) for each container - stopping 100 containers
that do not respond to SIGTERM would take 25 minutes.
To do this, refactor the parallel operation code a bit to remove
its dependency on libpod (damn circular import restrictions...)
and use parallel functions that just re-use the standard
container API operations - maximizes code reuse (previously each
pod handler had a separate implementation of the container
function it performed).
This is a bit of a palate cleanser after fighting CI for two
days - nice to be able to return to a land of sanity.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This commit is courtesy of
```
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Error /\1"error /' $f;
done
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Failed to /\1"failed to /' $f;
done
```
etc.
Self-reviewed using `git diff --word-diff`, found no issues.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The APIv2 pod endpoints that operate on multiple containers, such
as Start, Kill, Pause, Unpause, do not report errors encountered
by individual containers, because they incorrectly assume that
any error is fatal. The documentation for the Libpod API calls
notes, however, that ErrPodPartialFail will *always* be returned
if any container failed; so we need to ignore that error and
continue to collating and returning container errors.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This should help alleviate races where the pod is not fully
cleaned up before subsequent API calls happen.
Signed-off-by: Matthew Heon <mheon@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This fixes an error in the system tests, which expect that when
you try and kill a nonexistent pod with an incorrect signal, you
receive an error about the signal, not the pod.
At the same time, fix a missing return statement in the bindings,
which could also have caused us grief.
Fixes#6540
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Implement pod stats for the local and remote client. Both code paths end
up in infra/abi to allow for code share.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Register system prune route, handler to support system prune,
Adds testcase to validate the system prune flow.
Signed-off-by: Sujil02 <sushah@redhat.com>
Add the ability to prune pods for api v2,
Includes the addition of force flag, for client side prompt.
Update test suite to support this use case.
Signed-off-by: Sujil02 <sushah@redhat.com>
Note that this commit does not add tests for the pod-top endpoint.
They will be added in a later change.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
using the factory approach similar to container, we now create pods based on a pod spec generator. wired up the podmanv2 pod create command, podcreatewithspec binding, simple binding test, and apiv2 endpoint.
also included some code refactoring as it introduced as easy circular import.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Refactored current filter pods flow through the shared pod functions
so filter pod functionalities can be shared between api and cmd.
Signed-off-by: Sujil02 <sushah@redhat.com>
Update the strat and stop api to validate pod status based on status functions
rather than iterating over all the containers in the pod. (Addressing the TO-DO)
Signed-off-by: Sujil02 <sushah@redhat.com>
added the ability to wait on a condition (stopped, running, paused...) for a container. if a condition is not provided, wait will default to the stopped condition which uses the original wait code paths. if the condition is stopped, the container exit code will be returned.
also, correct a mux issue we discovered.
Signed-off-by: Brent Baude <bbaude@redhat.com>
this uses the specgen structure to create containers rather than the outdated createconfig. right now, only the apiv2 create is wired up. eventually the cli will also have to be done.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Include test to validate pod create, start, stop, restart,
pause, unpause, list, and inspect api bindings.
Also includes bug fixes that resulted in invalid api responses.
Signed-off-by: Sujil02 <sushah@redhat.com>
Jhon Honce
OpenShift Merge Robot
cdoern
Jakub Guzik
Valentin Rothberg
Daniel J Walsh
Hironori Shiina
Jakub Guzik
Paul Holzinger
Matthew Heon
Kir Kolyshkin
zhangguanzhang
Matthew Heon
Sujil02
Brent Baude