Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Podman adds an Error: to every error message. So starting an error
message with "error" ends up being reported to the user as
Error: error ...
This patch removes the stutter.
Also ioutil.ReadFile errors report the Path, so wrapping the err message
with the path causes a stutter.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow end users to preprocess default environment variables before
injecting them into container using `--env-merge`
Usage
```
podman run -it --rm --env-merge some=${some}-edit --env-merge
some2=${some2}-edit2 myimage sh
```
Closes: https://github.com/containers/podman/issues/15288
Signed-off-by: Aditya R <arajan@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
For some reason commit 5b79cf15a0 moved the container create options
parsing from cmd/podman/common to pkg/api/handlers. However it did not
remove the old code. Unfortunately it moved the code from an outdated
version and did not update it before this commit was merged.
Therefore a couple of regressions were introduced. I manually compared
both versions and found three missing bugfixes.
I fixed the network test again that was changed in bce97a3b5d. We
want bridge as default even as rootless. Sine the test is not run as
rootless in CI the regression was not caught.
Also the no hosts test never worked since it was missing the import
check if the hosts file exists.
I don't think we can check for the volume parsing change since this only
works on windows/wsl.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Remove duplicate or unused types and constants
* Move all documetation-only models and responses into swagger package
* Remove all unecessary names, go-swagger will determine names from
struct declarations
* Use Libpod suffix to differentiate between compat and libpod models
and responses. Taken from swagger:operation declarations.
* Models and responses that start with lowercase are for swagger use
only while uppercase are used "as is" in the code and swagger comments
* Used gofumpt on new code
```release-note
```
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This commit removes error message string from utils.Error in pkg/api.
Param was not used inside a function for quite a long time
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
The Docker-compatible REST API has historically behaved just as the rest
of Podman and Buildah (and the atomic Docker in older RHEL/Fedora) where
`containers-registries.conf` is centrally controlling which registries
a short name may resolve to during pull or local image lookups. Please
refer to a blog for more details [1].
Docker, however, is only resolving short names to docker.io which has
been reported (see #12320) to break certain clients who rely on this
behavior. In order to support this scenario, `containers.conf(5)`
received a new option to control whether Podman's compat API resolves
to docker.io only or behaves as before.
Most endpoints allow for directly normalizing parameters that represent
an image. If set in containers.conf, Podman will then normalize the
references directly to docker.io. The build endpoint is an outlier
since images are also referenced in Dockerfiles. The Buildah API,
however, supports specifying a custom `types.SystemContext` in which
we can set a field that enforces short-name resolution to docker.io
in `c/image/pkg/shortnames`.
Notice that this a "hybrid" approach of doing the normalization directly
in the compat endpoints *and* in `pkg/shortnames` by passing a system
context. Doing such a hybrid approach is neccessary since the compat
and the libpod endpoints share the same `libimage.Runtime` which makes
a global enforcement via the `libimage.Runtime.systemContext`
impossible. Having two separate runtimes for the compat and the libpod
endpoints seems risky and not generally applicable to all endpoints.
[1] https://www.redhat.com/sysadmin/container-image-short-namesFixes: #12320
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Docker/Moby always create the working directory, and some tools
rely on that behavior (example, woodpecker/drone).
Fixes#11842
Signed-off-by: Michael Scherer <misc@redhat.com>
* To aid in debugging log API request and response bodies at trace
level. Events can be correlated using the X-Reference-Id.
* Server now echos X-Reference-Id from client if set, otherwise
generates an unique id.
* Move logic for X-Reference-Id into middleware
* Change uses of Header.Add() to Set() when setting Content-Type
* Log API operations in Apache format using gorilla middleware
* Port server code to use BaseContext and ConnContext
Fixes#10053
Signed-off-by: Jhon Honce <jhonce@redhat.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
Vendor in the latest HEAd of containers/common to implicitly support the
tag@digest notation for images. To remain compatible with Docker, the
tag will be stripped off the image reference and is entirely ignored.
Fixes: #6721
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Make endpoint compatibile with docker-py network expectations
* Update specgen helper when called from compat endpoint
* Update godoc on types
* Add test for network/container create using docker-py method
* Add syslog logging when DEBUG=1 for tests
Fixes#8361
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Update reference to docker-py to docker to reflect change in library
name
* Update tests to create storage sandbox
* Enable all tests that endpoints support
* Refactor containers/{id}/rename to return 404 not 500
* Refactor tests to use quay.io vs. docker.io
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when running container creation as rootless on the compatibility layer,
we need to make sure settings are not being done for memory and memory
swappiness.
Signed-off-by: baude <bbaude@redhat.com>
when using the compatibility layer to create containers, it used code paths to the pkg/spec which is the old implementation of containers. it is error prone and no longer being maintained. rather that fixing things in spec, migrating to specgen usage seems to make the most sense. furthermore, any fixes to the compat create will not need to be ported later.
Signed-off-by: baude <bbaude@redhat.com>
when using the compatibility mode as rootless, containers that were created were not setting their host names correctly due to the netmode not being set.
Fixes: #7934
Signed-off-by: baude <bbaude@redhat.com>
This commit is courtesy of
```
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Error /\1"error /' $f;
done
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Failed to /\1"failed to /' $f;
done
```
etc.
Self-reviewed using `git diff --word-diff`, found no issues.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
when creating a container using the compat endpoint, the interactive bool was being hard set to false and ignoring the user's input.
Signed-off-by: baude <bbaude@redhat.com>
This matches Docker behavior, and will make the Docker frontend
work with `podman system service` (Docker tries to create, then
if that fails with 404 sends a request to pull the image).
Fixes#6960
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This change ensures that we pull volume bind specification strings from
the correct spot in the POSTed data when creating containers. We should
probably canity check that the mapping keys in `Volumes` are a superset
of the binds listed in `HostConfig.Binds` but this cheap change removes
an annoying behaviour where named volumes or host mount would be
silently replaced with newly created anonymous volumes.
Signed-off-by: Matt Brindley <58414429+maybe-sybr@users.noreply.github.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add more default options parsing
Switch to using --time as opposed to --timeout to better match Docker.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Stefano Brivio
Daniel J Walsh
Aditya R
Sascha Grunert
Paul Holzinger
Jhon Honce
Jakub Guzik
Valentin Rothberg
Michael Scherer
cdoern
Matthew Heon
Riyad Preukschas
zhangguanzhang
Milivoje Legenovic
OpenShift Merge Robot
baude
Matej Vasek
Kir Kolyshkin
Matthew Heon
maybe-sybr