When creating a network we pass down a name which end up in the
K8S_POD_NAME argument to cni plugins. Currently this name is always
filled with the container name, so for pods it is the name of the
infra container, not really what one would expect.
This mess up with the dnsname plugin as it doesn't receive the pod
name in K8S_POD_NAME. To fix this pass the pod name when the container
is part of a pod, otherwise use the container name like before.
Signed-off-by: Alban Bedel <albeu@free.fr>
---
v2: Only call GetPod() when a pod id is set
We previously attempted to work within CNI to do this, without
success. So let's do it manually, instead. We know where the
files should live, so we can remove them ourselves instead. This
solves issues around sudden reboots where containers do not have
time to fully tear themselves down, and leave IP address
allocations which, for various reasons, are not stored in tmpfs
and persist through reboot.
Fixes#5433
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Specifically to get:
https://github.com/containernetworking/cni/pull/735
6f29b0165883b2b52ccd4dcb937162ea4c86927b intercept netplugin std err
But also pulls in some interface name validation and a compatibility
fix for configurations that don't set a CNI version.
Signed-off-by: Dan Williams <dcbw@redhat.com>
When inspecting containers, info on CNI networks added to the
container by name (e.g. --net=name1) should be displayed
separately from the configuration of the default network, in a
separate map called Networks.
This patch adds this separation, improving our Docker
compatibility and also adding the ability to see if a container
has more than one IPv4 and IPv6 address and more than one MAC
address.
Fixes#4907
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
when using -d and port mapping, make sure the correct fd is injected
into conmon.
Move the pipe creation earlier as the fd must be known at the time we
create the container through conmon.
Closes: https://github.com/containers/libpod/issues/5167
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Our networking code bakes in a lot of assumptions about how
networking should work - that CNI is *always* used with root, and
that slirp4netns is *always* used only with rootless. These are
not safe assumptions. This fixes one particular issue, which
would cause CNI to also be run when slirp4netns was requested as
root.
Fixes: #4687
Signed-off-by: Matthew Heon <mheon@redhat.com>
RootlessKit port forwarder has a lot of advantages over the slirp4netns port forwarder:
* Very high throughput.
Benchmark result on Travis: socat: 5.2 Gbps, slirp4netns: 8.3 Gbps, RootlessKit: 27.3 Gbps
(https://travis-ci.org/rootless-containers/rootlesskit/builds/597056377)
* Connections from the host are treated as 127.0.0.1 rather than 10.0.2.2 in the namespace.
No UDP issue (#4586)
* No tcp_rmem issue (#4537)
* Probably works with IPv6. Even if not, it is trivial to support IPv6. (#4311)
* Easily extensible for future support of SCTP
* Easily extensible for future support of `lxc-user-nic` SUID network
RootlessKit port forwarder has been already adopted as the default port forwarder by Rootless Docker/Moby,
and no issue has been reported AFAIK.
As the port forwarder is imported as a Go package, no `rootlesskit` binary is required for Podman.
Fix#4586
May-fix #4559Fix#4537
May-fix #4311
See https://github.com/rootless-containers/rootlesskit/blob/v0.7.0/pkg/port/builtin/builtin.go
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
These only conflict when joining more than one network. We can
still set a single CNI network and set a static IP and/or static
MAC.
Fixes#4500
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
`go get github.com/cri-o/ocicni@deac903fd99b6c52d781c9f42b8db3af7dcfd00a`
I had to fix compilation errors in libpod/networking_linux.go
---
ocicni.Networks has changed from string to the structure NetAttachment
with the member Name (the former string value) and the member Ifname
(optional).
I don't think we can make use of Ifname here, so I just map the array of
structures to array of strings - e.g. dropping Ifname.
---
The function GetPodNetworkStatus no longer returns Result but it returns
the wrapper structure NetResult which contains the former Result plus
NetAttachment (Network name and Interface name).
Again, I don't think we can make use of that information here, so I
just added `.Result` to fix the build.
---
Issue: #1136
Signed-off-by: Jakub Filak <jakub.filak@sap.com>
the pidWaitTimeout is already a Duration so do not multiply it again
by time.Millisecond.
Closes: https://github.com/containers/libpod/issues/4344
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
read the slirp4netns stderr and propagate it in the error when the
process fails.
Replace: https://github.com/containers/libpod/pull/4338
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
network statistics cannot be collected for rootless network devices with
the current implementation. for now, we return nil so that stats will
at least for users.
Fixes:#4268
Signed-off-by: baude <bbaude@redhat.com>
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In order to run Podman with VM-based runtimes unprivileged, the
network must be set up prior to the container creation. Therefore
this commit modifies Podman to run rootless containers by:
1. create a network namespace
2. pass the netns persistent mount path to the slirp4netns
to create the tap inferface
3. pass the netns path to the OCI spec, so the runtime can
enter the netns
Closes#2897
Signed-off-by: Gabi Beyer <gabrielle.n.beyer@intel.com>
if slirp4netns supports sandboxing, enable it.
It automatically creates a new mount namespace where slirp4netns will
run and have limited access to the host resources.
It needs slirp4netns 0.4.1.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
drop the pkg/firewall module and start using the firewall CNI plugin.
It requires an updated package for CNI plugins.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In order to run Podman with VM-based runtimes unprivileged, the
network must be set up prior to the container creation. Therefore
this commit modifies Podman to run rootless containers by:
1. create a network namespace
2. pass the netns persistent mount path to the slirp4netns
to create the tap inferface
3. pass the netns path to the OCI spec, so the runtime can
enter the netns
Closes#2897
Signed-off-by: Gabi Beyer <gabrielle.n.beyer@intel.com>
This is needed for dual stack IPv6 support within CRI-O. Because the API
changed within OCICNI, we have to adapt the internal linux networking as
well.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Let's put inspect structs where they're actually being used. We
originally made pkg/inspect to solve circular import issues.
There are no more circular import issues.
Image structs remain for now, I'm focusing on container inspect.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
print a clearer error message when an unprivileged user attempts to
create a network using CNI.
Closes: https://github.com/containers/libpod/issues/3118
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Older versions of slirp4netns do not have the --disable-host-loopback
flag.
Remove the check once we are sure the updated version is available
everywhere.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add support for ports redirection from the host.
It needs slirp4netns v0.3.0-alpha.1.
Closes: https://github.com/containers/libpod/issues/2081
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The initial implementation to request the same IP address for a
container during a restore was based on environment variables
influencing CNI.
With this commit the IP address selection switches to Podman's internal
static IP API.
This commit does a comment change in libpod/container_easyjson.go to
avoid unnecessary re-generation of libpod/container_easyjson.go during
build as this fails in CI. The reason for this is that make sees that
libpod/container_easyjson.go needs to be re-created. The commit,
however, only changes a part of libpod/container.go which is marked as
'ffjson: skip'.
Signed-off-by: Adrian Reber <areber@redhat.com>
We are seeing some issues where, when part of prepare() fails
(originally noticed due to a bad static IP), the other half does
not successfully clean up, and the state can be left in a bad
place (not knowing about an active SHM mount for example).
Signed-off-by: Matthew Heon <mheon@redhat.com>
once we changed configureNetNS to return a result beyond an error,
we need to make sure that we used locals instead of ctr attributes
when determining networks.
Resolves#1752
Signed-off-by: baude <bbaude@redhat.com>
If for any reason slirp4netns fails at startup, podman waits
indefinitely. Check every second if the process is still running so
that we avoid to hang.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
run prepare() -- which consists of creating a network namespace and
mounting the container image is now run in parallel. This saves 25-40ms.
Signed-off-by: baude <bbaude@redhat.com>
Use the new firewall code vendored from CNI to replace the
existing iptables rule addition handler we had in place. This
adds proper support for firewalld and should be much better at
interacting with the firewall.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1431
Approved by: baude
Need to get some small changes into libpod to pull back into buildah
to complete buildah transition.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1270
Approved by: mheon
Alban Bedel
Daniel J Walsh
Brent Baude
Giuseppe Scrivano
Matthew Heon
Dan Williams
OpenShift Merge Robot
Matthew Heon
Akihiro Suda
Jakub Filak
Gabi Beyer
Sascha Grunert
Adrian Reber
Matthew Heon
haircommander