There is no reason to validate the args here, first podman may change
the syntax so this is just duplication that may hurt us long term. It
also added special handling of some options that just do not make sense,
i.e. removing 0.0.0.0, podman should really be the only parser here. And
more importantly this prevents variables from being used.
Fixes#24081
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
e.g.: if the pod name is systemd-awd, the name of its infra container will be systemd-awd-infra
Signed-off-by: Misaki Kasumi <misakikasumi@outlook.com>
Add support for the ServiceName key for all unit types
Extend the PodInfo struct into UnitInfo to consolidate all prepopulated data into a single map
Use the NodesInfo map instead of the resourceName
Update the UnitInfo in the convert function instead of returning it
No need to replace extension anymore just remove it
All e2e tests with dependencies on other Quadlet files moved to a separate section
Add the capability of overriding the service name in the test
Add e2e tests for the new functionality
Adjust integration tests
Update the MAN page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Adds a `NetworkAlias=` key to both .container and .pod quadlet files,
which translates to the `--network-alias` option to `podman run` and
`podman pod create` respectively. Can be repeated multiple times.
Signed-off-by: Félix Saparelli <felix@passcod.name>
I found that Quadlet didn't currently have support for log options.
This merge allows Quadlet to handle log options and correctly
pass those values through to `podman run` for Container and Kube
types.
Syntactically consistent with existing parameters:
```ini
[Container]
Image=localhost/imagename
LogOpt=path=/var/log/container/mycontainer.json
LogOpt=size=10mb
```
Signed-off-by: Brett Calliss <brett@obligatory.email>
.build files allow to build an image via Quadlet. The keys from a .build
file are translated to arguments of a `podman build` command by Quadlet.
Minimal keys for .build files are `ImageTag=` and a context directory,
see `SetWorkingDirectory=`, or a `File=` pointing to a Containerfile.
After sorting .build files into the Quadlet dependency order, there
remains a possible dependency cycle issue between .volume and .build
files: A .volume can have `Image=some.build`, and a .build can have
`Volume=some.volume:/some/volume`.
We solve this dependency cycle by prefilling resourceNames with all
image names from .build files before converting all the unit files.
This results in an issue for the test suite though: For .volume's
depending on *.image or *.build, we need to copy these additional
dependencies to the test's quadletDir, otherwise the test will fail.
This is necessary, because `handleImageSource()` actually needs to know
the image name defined in the referenced *.{build,image} file. It cannot
fall back on the default names, as it is done for networks or volumes,
for example.
Signed-off-by: Johannes Maibaum <jmaibaum@gmail.com>
If a container unit starts on boot with a dependency on `default.target`
the image unit may start too soon, before network is ready. This cause
the unit to fail to pull the image.
- Add a dependency on `network-online.target` to make sure image pulls
don't fail.
See https://github.com/containers/podman/issues/21873
- Document the hardcoded dependency on `network-online.target` for images unit
and explain how it can be overriden if necessary.
- tests/e2e/quadlet: Add `assert-last-key-regex`
Required to test the `After=` override in [Unit] section
See https://github.com/containers/podman/pull/22057#issuecomment-2008959993
- quadlet/unitfile: add a prepenUnitLine method
Requirements on networks should be inserted at the top of the
section so the user can override them.
Signed-off-by: jbtrystram <jbtrystram@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
New CI validation check: all keys in quadlet.go must be
documented at least once in podman-systemd.unit.5.md.
Adding '// deprecated' next to an enum definition will
exclude said key from the documentation cross-checks.
And, because the md file lists keys in both table and block
form, make sure those all match.
And make sure everything is sorted in lexical order, in
both .go source and in man page.
And add a validation check to make sure it stays that way.
Signed-off-by: Ed Santiago <santiago@redhat.com>
- A number of keys had a "Network" prefix, for historical reasons
that never panned out ("KeyNetworkGateway"). Remove that prefix
and remove the two duplicates.
- Three RemapXXX keys were mismatched in case ("UID" vs "Uid").
Make those consistent.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Cut is a cleaner & more performant api relative to SplitN(_, _, 2) added in go 1.18
Previously applied this refactoring to buildah:
https://github.com/containers/buildah/pull/5239
Signed-off-by: Philip Dubé <philip@peerdb.io>
Add support for using multiple `Ulimit=` options in `.container` files.
Before, only the last `Ulimit=` option was used in the podman command.
Update podman-systemd.unit.5 docs to reflect this change.
Add `test/e2e/quadlet/ulimit.container` to e2e tests.
Signed-off-by: Paul Nettleton <k9@k9withabone.dev>
This PR closes#20585
Add Inital support for Entrypoint on quadlets
Add Bats Tests for Entrypoint
Updates the documentation with one example to use the Entrypoint option
Signed-off-by: Odilon Sousa <osousa@redhat.com>
Add support for .pod unit files with only PodmanArgs, GlobalArgs, ContainersConfModule and PodName
Add support for linking .container units with .pod ones
Add e2e and system tests
Add to man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
This expands support for the (previously) boolean `Notify` directive, in
support of healthcheck determined SD-NOTIFY event emission, as
supported by Podman with the `--sdnotify=healthy` option.
Closes: #18189
Signed-off-by: Alex Palaistras <alex@deuill.org>
Support UIDMap, GIDMap, SubUIDMap and SubGIDMap
If any of them are set disregard the deprecated Remap keys
Add tests and man
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Add Quadlet key and disconnect relationship withr read-only
Update and add tests
Update man with new key
Remove the reference to VolatileTmpfs in the man page to reduce its
usage, since the same functionality can be achieved using the Tmpfs key
while keeping its support to maintain backward compatibility
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Add support for adding podman level arguments before subcommand
Add specific key for Containers Conf Modules
Global arguments are added for both start and stop commands
Adjust testing environment
Add tests
Add to man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Paul Holzinger
Jan Rodák
Steve Jibson
Misaki Kasumi
Ygal Blum
Jerome Degroote
openshift-merge-bot[bot]
Daniel J Walsh
Félix Saparelli
Brett Calliss
Johannes Maibaum
jbtrystram
Jonas Berlin
Giuseppe Scrivano
Matt Heon
Alexander Larsson
Ed Santiago
Philip Dubé
Paul Nettleton
Odilon Sousa
Alex Palaistras
openshift-ci[bot]