When starting a process with `podman exec -it` the terminal is resized
after the process is started. To fix this allow exec start to accept the
terminal height and width as parameter and let it resize right before
the process is started.
Fixes#10560
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The container name should have the slirp interface ip set in /etc/hosts
and not the gateway ip. Commit c8dfcce6db introduced this regression.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1972073
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Network connect/disconnect has to call the cni plugins when the network
namespace is already configured. This is the case for `ContainerStateRunning`
and `ContainerStateCreated`. This is important otherwise the network is
not attached to this network namespace and libpod will throw errors like
`network inspection mismatch...` This problem happened when using
`docker-compose up` in attached mode.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman uses the volume option map to check if it has to mount the volume
or not when the container is started. Commit 28138dafcc added to uid
and gid options to this map, however when only uid/gid is set we cannot
mount this volume because there is no filesystem or device specified.
Make sure we do not try to mount the volume when only the uid/gid option
is set since this is a simple chown operation.
Also when a uid/gid is explicity set, do not chown the volume based on
the container user when the volume is used for the first time.
Fixes#10620
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When making Exec Cleanup processes mandatory, I introduced a race
wherein attached exec sessions could be cleaned up and removed by
the cleanup process before the frontend had a chance to get their
exit code. Fortunately, we've dealt with this issue before in
containers, and the same solution can be applied here. I added an
event for an exec session's process exiting, `exec_died` (Docker
has an identical event, so this actually improves our
compatibility there) that includes the exit code of the exec
session. If the race happens and the exec session no longer
exists when we go to remove it, pick up exit code from the event
and exit cleanly.
Signed-off-by: Matthew Heon <mheon@redhat.com>
We were previously only doing this for detached exec. I don't
know why we did that, but I don't see any reason not to extend it
to all exec sessions - it guarantees that we will always clean up
exec sessions, even if the original `podman exec` process died.
[NO TESTS NEEDED] because I don't really know how to test this
one.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Unfortunately --pre-checkpointing never worked as intended and recent
changes to runc have shown that it is broken.
To create a pre-checkpoint CRIU expects the paths between the
pre-checkpoints to be a relative path. If having a previous checkpoint
it needs the be referenced like this: --prev-images-dir ../parent
Unfortunately Podman was giving runc (and CRIU) an absolute path.
Unfortunately, again, until March 2021 CRIU silently ignored if
the path was not relative and switch back to normal checkpointing.
This has been now fixed in CRIU and runc and running pre-checkpoint
with the latest runc fails, because runc already sees that the path is
absolute and returns an error.
This commit fixes this by giving runc a relative path.
This commit also fixes a second pre-checkpointing error which was just
recently introduced.
So summarizing: pre-checkpointing never worked correctly because CRIU
ignored wrong parameters and recent changes broke it even more.
Now both errors should be fixed.
[NO TESTS NEEDED]
Signed-off-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Adrian Reber <adrian@lisas.de>
when looking up the container cgroup, ignore named hierarchies since
containers running systemd as payload will create a sub-cgroup and
move themselves there.
Closes: https://github.com/containers/podman/issues/10602
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Checkpointed containers started with --privileged fail during restore
with:
Error: error creating container storage: ProcessLabel and Mountlabel must either not be specified or both specified
This commit fixes it by not setting the labels when restoring a
privileged container.
[NO TESTS NEEDED]
Signed-off-by: Adrian Reber <areber@redhat.com>
When 127.0.0.53 is the only nameserver in /etc/resolv.conf assume
systemd-resolved is used. This is better because /etc/resolv.conf does
not have to be symlinked to /run/systemd/resolve/stub-resolv.conf in
order to use systemd-resolved.
[NO TESTS NEEDED]
Fixes: #10570
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fix a race in the k8s-file logs driver. When "following" the logs,
Podman will print the container's logs until the end. Previously,
Podman logged until the state transitioned into something non-running
which opened up a race with the container still running, possibly in
the "stopping" state.
To fix the race, log until we've seen the wait event for the specific
container. In that case, conmon will have finished writing all logs to
the file, and Podman will read it until EOF.
Further tweak the integration tests for testing `logs -f` on a running
container. Previously, the test only checked for one of two lines
stating that there was a race. Indeed the race was in using `run --rm`
where a log file may be removed before we could fully read it.
Fixes: #10596
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The checkpoint archive compression was hardcoded to `archive.Gzip`.
There have been requests to make the used compression algorithm
selectable. There was especially the request to not compress the
checkpoint archive to be able to create faster checkpoints when not
compressing it.
This also changes the default from `gzip` to `zstd`. This change should
not break anything as the restore code path automatically handles
whatever compression the user provides during restore.
Signed-off-by: Adrian Reber <areber@redhat.com>
The containers /etc/resolv.conf allways preserved the ipv6 nameserves
from the host even when the container did not supported ipv6. Check
if the cni result contains an ipv6 address or slirp4netns has ipv6
support enabled and only add the ipv6 nameservers when this is the case.
The test needs to have an ipv6 nameserver in the hosts /etc/hosts but we
should never mess with this file on the host. Therefore the test is
skipped when no ipv6 is detected.
Fixes#10158
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
While different filters are applied in conjunction, the same filter (but
with different values) should be applied in disjunction. This allows,
for instance, to query the events of two containers.
Fixes: #10507
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Using the gvproxy application on the host, we can now port forward from
the machine vm on the host. It requires that 'gvproxy' be installed in
an executable location. gvproxy can be found in the
containers/gvisor-tap-vsock github repo.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Move the creation of the channel outside of the sub-routine to fix a
data race between writing the channel (implicitly by calling
EventChannel()) and using that channel in libimage.
[NO TESTS NEEDED]
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
After #8906, there is a potential race condition in container
removal of running containers with `--rm`. Running containers
must first be stopped, which was changed to unlock the container
to allow commands like `podman ps` to continue to run while
stopping; however, this also means that the cleanup process can
potentially run before we re-lock, and remove the container from
under us, resulting in error messages from `podman rm`. The end
result is unchanged, the container is still cleanly removed, but
the `podman rm` command will seem to have failed.
Work around this by pinging the database after we stop the
container to make sure it still exists. If it doesn't, our job is
done and we can exit cleanly.
Signed-off-by: Matthew Heon <mheon@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Fix a race in journald driver. Following the logs implies streaming
until the container is dead. Streaming happened in one goroutine,
waiting for the container to exit/die and signaling that event happened
in another goroutine.
The nature of having two goroutines running simultaneously is pretty
much the core of the race condition. When the streaming goroutines
received the signal that the container has exitted, the routine may not
have read and written all of the container's logs.
Fix this race by reading both, the logs and the events, of the container
and stop streaming when the died/exited event has been read. The died
event is guaranteed to be after all logs in the journal which guarantees
not only consistencty but also a deterministic behavior.
Note that the journald log driver now requires the journald event
backend to be set.
Fixes: #10323
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix a data race between creating and using the libimage-events channel.
[NO TESTS NEEDED] since it really depends on the scheduler and we
couldn't hit the race so far.
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
ErrOCIRuntimeNotFound error is misleading. Try to make it more
understandable to the user that the OCI Runtime IE crun or runc is not
missing, but the command they attempted to run within the container is
missing.
[NO TESTS NEEDED] Regular tests should handle this.
Fixes: https://github.com/containers/podman/issues/10432
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Creating a macvlan network with the subnet or ipRange option should set
the ipam plugin type to `host-local`. We also have to insert the default
route.
Fixes#10283
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When attempting to copy files into and out of running containers
within the host pidnamespace, the code was attempting to join the
host pidns again, and getting an error. This was causing the podman
cp command to fail. Since we are already in the host pid namespace,
we should not be attempting to join. This PR adds a check to see if
the container is in NOT host pid namespace, and only then attempts to
join.
Fixes: https://github.com/containers/podman/issues/9985
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
This change adds the entry `host.containers.internal` to the `/etc/hosts`
file within a new containers filesystem. The ip address is determined by
the containers networking configuration and points to the gateway address
for the containers networking namespace.
Closes#5651
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Docker allows relabeling of any volume passed in via -v, even
including named volumes. This normally isn't an issue at all,
given named volumes get the right label for container access
automatically, but this becomes an issue when volume plugins are
involved - these aren't managed by Podman, and may well be
unaware of SELinux labelling. We could automatically relabel
these volumes on creation, but I'm still reluctant to do that
(feels like it could break things). Instead, let's allow :z and
:Z to be used with named volumes, so users can explicitly request
relabel of a volume plugin-backed volume.
We also get :U at the same time. I don't see any real need for it
but it also doesn't seem to hurt, so I didn't bother disabling
it.
Fixes#10273
Signed-off-by: Matthew Heon <mheon@redhat.com>
Allow podman network reload to be run as rootless user. While it is
unlikely that the iptable rules are flushed inside the rootless cni
namespace, it could still happen. Also fix podman network reload --all
to ignore errors when a container does not have the bridge network mode,
e.g. slirp4netns.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We should create the /etc/mtab->/proc/mountinfo link
so that mount command will work within the container.
Docker does this by default.
Fixes: https://github.com/containers/podman/issues/10263
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The initial version of libimage changed the order of layers which has
now been restored to remain backwards compatible.
Further changes:
* Fix a bug in the journald logging which requires to strip trailing
new lines from the message. The system tests did not pass due to
empty new lines. Triggered by changing the default logger to
journald in containers/common.
* Fix another bug in the journald logging which embedded the container
ID inside the message rather than the specifid field. That surfaced
in a preceeding whitespace of each log line which broke the system
tests.
* Alter the system tests to make sure that the k8s-file and the
journald logging drivers are executed.
* A number of e2e tests have been changed to force the k8s-file driver
to make them pass when running inside a root container.
* Increase the timeout in a kill test which seems to take longer now.
Reasons are unknown. Tests passed earlier and no signal-related
changes happend. It may be CI VM flake since some system tests but
other flaked.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When a container is automatically restarted due its restart policy and
the container used the slirp4netns netmode, the slirp4netns process
died. This caused the container to lose network connectivity.
To fix this we have to start a new slirp4netns process.
Fixes#8047
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Developers asked for a deterministic field to verify if podman is
running via API or linked directly to libpod library.
$ podman info --format '{{.Host.ServiceIsRemote}}'
false
$ podman-remote info --format '{{.Host.ServiceIsRemote}}'
true
$ podman --remote info --format '{{.Host.ServiceIsRemote}}'
true
* docs/conf.py formatted via black
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Commit 728b73d7c4 introduced a regression. Containers created with a
previous version do no longer start successfully. The problem is that
the PidFile in the container config is empty for those containers. If
the PidFile is empty we have to set it to the previous default.
[NO TESTS NEEDED] We should investigate why the system upgrade test did
not caught this.
Fixes#10274
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
In the case of generate kube the auto-update labels will be converted into kube annotations and for play kube they will be converted back to labels since that's what podman understands
Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
Revert : https://github.com/containers/podman/pull/9895
Turns out that if Docker is in --selinux-enabeled, it still relabels if
the user tells the system to, even if running a --privileged container
or if the selinux separation is disabled --security-opt label=disable.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Env var secrets are env vars that are set inside the container but not
commited to and image. Also support reading from env var when creating a
secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
filepath.Dir in some cases returns `.` symbol and calling this function
again returns same result. In such cases this function
never returns and causes some operations to stuck forever.
Closes#10216
Signed-off-by: Slava Bacherikov <slava@bacher09.org>
extend to pods the existing check whether the cgroup is usable when
running as rootless with cgroupfs.
commit 17ce567c68 introduced the
regression.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
volatile containers are a storage optimization that disables *sync()
syscalls for the container rootfs.
If a container is created with --rm, then automatically set the
volatile storage flag as anyway the container won't persist after a
reboot or machine crash.
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
if --cgroup-parent is specified, always honor it without doing any
detection whether cgroups are supported or not.
Closes: https://github.com/containers/podman/issues/10173
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When in podman machine virtual machines, podman needs to be able to
detect as such. One implementation for this is when creating networks,
the podman-machine cni plugin needs to be added to the configuration.
This PR also includes the latest containers-common.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
This commits fixes until filter. It is now checking if the created
timestamp is before until filter value as expected in the docs.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
when deciding to create a user namespace, check for CAP_SYS_ADMIN
instead of looking at the euid.
[NO TESTS NEEDED] Needs nested Podman
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The source ip for the rootlesskit port forwarder was hardcoded to the
standard slirp4netns ip. This is incorrect since users can change the
subnet used by slirp4netns with `--network slirp4netns:cidr=10.5.0.0/24`.
The container interface ip is always the .100 in the subnet. Only when
the rootlesskit port forwarder child ip matches the container interface
ip the port forwarding will work.
Fixes#9828
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
In libpod/image.Image.Remove(), if the attempt to find the image's
parent fails for any reason, log a warning and proceed as though it
didn't have one instead of failing, which would leave us unable to
remove the image without resetting everything.
In libpod/Runtime.RemoveImage(), if we can't determine if an image has
children, log a warning, and assume that it doesn't have any instead of
failing, which would leave us unable to remove the image without
resetting everything.
In pkg/domain/infra/abi.ImageEngine.Remove(), when attempting to remove
all images, if we encounter an error checking if a given image has
children, log a warning, and assume that it doesn't have any instead of
failing, which would leave us unable to remove the image without
resetting everything.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
- Persist CDIDevices in container config
- Add e2e test
- Log HasDevice error and add additional condition for safety
Signed-off-by: Sebastian Jug <seb@stianj.ug>
Noticed this while I was poking around in the runtime doing DB
work. The signature of this function makes me a bit uncomfortable
(why should we let people apply arbitrary diffs to layers? Seems
like a good way to break things...) and it's completely unused,
so let's just remove it.
[NO TESTS NEEDED] since this is a pure removal.
Signed-off-by: Matthew Heon <mheon@redhat.com>
I believe moving the conmon probing code to c/common wasn't the best strategy.
Different container engines have different requrements of which conmon version is required
(based on what flags they use).
Signed-off-by: Peter Hunt <pehunt@redhat.com>
podman image prune paniced locally for me. The error handling was not
done correctly and we could end up with a nil pointer dereference.
[NO TESTS NEEDED] I have no idea how I could force an error in img.Size().
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We originally added this in the *very early* days of Podman,
before a proper persistent state was written, so we had something
to test with. It was retained after the original SQLite state
(and current BoltDB state) were written so it could be used for
testing Libpod in unit tests with no requirement for on-disk
storage. Well, such unit tests never materialized, and if we were
to write some now the requirement to have a temporary directory
for storing data on disk is not that bad. I can basically
guarantee there are no users of this in the wild because, even if
you managed to figure out how to configure it when we don't
document it, it's completely unusable with Podman since all your
containers and pods will disappear every time Podman exits.
Given all this, and since it's an ongoing maintenance burden I no
longer wish to deal with, let's just remove it.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently the debug line shows every runtime up until it finds
the correct one, confusing users on which runtime it is using.
Also move missing OCI runtime from containers/conf down to Debug level
and improved the debug message, to not report error.
[NO TESTS NEEDED] Since this is just debug.
Triggered by https://github.com/containers/podman/issues/4854
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
10 lines above we had
// Set ContainerStateRemoving
c.state.State = define.ContainerStateRemoving
Which causes the state to not be the two checked states. Since the
c.cleanup call already deleted the OCI state, this meant that we were
calling cleanup, and hence the postHook hook twice.
Fixes: https://github.com/containers/podman/issues/9983
[NO TESTS NEEDED] Since it would be difficult to tests this. Main tests
should handle that the container is being deleted successfully.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
do not set the cgroup parent when running as rootless with cgroupfs,
even if cgroup v2 is used.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1947999
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add a new --rootless-cni option to podman unshare to also join the
rootless-cni network namespace. This is useful if you want to connect
to a rootless container via IP address. This is only possible from the
rootless-cni namespace and not from the host namespace. This option also
helps to debug problems in the rootless-cni namespace.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The CNI plugins need access to iptables in $PATH. On debian /usr/sbin
is not added to $PATH for rootless users. This will break rootless
cni completely. To prevent breaking existing users add /usr/sbin to
$PATH in podman if needed.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
One of the side-effects of the `--userns=keep-id` command is
switching the default user of the container to the UID of the
user running Podman (though this can still be overridden by the
`--user` flag). However, it did this by setting the UID and GID
in the OCI spec, and not by informing Libpod of its intention to
switch users via the `WithUser()` option. Because of this, a lot
of the code that should have triggered when the container ran
with a non-root user was not triggering. In the case of the issue
that this fixed, the code to remove capabilities from non-root
users was not triggering. Adjust the keep-id code to properly
inform Libpod of our intention to use a non-root user to fix
this.
Also, fix an annoying race around short-running exec sessions
where Podman would always print a warning that the exec session
had already stopped.
Fixes#9919
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Docker does not relabel this content, and openstack is running
containers in this manner. There is a penalty for doing this
on each container, that is not worth taking on a disable SELinux
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We define in the man page that this overrides the default storage
options, but the code was appending to the existing options.
This PR also makes a change to allow users to specify --storage-opt="".
This will turn off all storage options.
https://github.com/containers/podman/issues/9852
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If a user only has a local dns server in the resolv.conf file the dns
resolution will fail. Instead we create a new resolv.conf which will use
the slirp4netns dns.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
With the new rootless cni supporting network connect/disconnect is easy.
Combine common setps into extra functions to prevent code duplication.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
For rootless users the infra container used the slirp4netns net mode
even when bridge was requested. We can support bridge networking for
rootless users so we have allow this. The default is not changed.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Instead of creating an extra container create a network and mount
namespace inside the podman user namespace. This ns is used to
for rootless cni operations.
This helps to align the rootless and rootful network code path.
If we run as rootless we just have to set up a extra net ns and
initialize slirp4netns in it. The ocicni lib will be called in
that net ns.
This design allows allows easier maintenance, no extra container
with pause processes, support for rootless cni with --uidmap
and possibly more.
The biggest problem is backwards compatibility. I don't think
live migration can be possible. If the user reboots or restart
all cni containers everything should work as expected again.
The user is left with the rootless-cni-infa container and image
but this can safely be removed.
To make the existing cni configs work we need execute the cni plugins
in a extra mount namespace. This ensures that we can safely mount over
/run and /var which have to be writeable for the cni plugins without
removing access to these files by the main podman process. One caveat
is that we need to keep the netns files at `XDG_RUNTIME_DIR/netns`
accessible.
`XDG_RUNTIME_DIR/rootless-cni/{run,var}` will be mounted to `/{run,var}`.
To ensure that we keep the netns directory we bind mount this relative
to the new root location, e.g. XDG_RUNTIME_DIR/rootless-cni/run/user/1000/netns
before we mount the run directory. The run directory is mounted recursive,
this makes the netns directory at the same path accessible as before.
This also allows iptables-legacy to work because /run/xtables.lock is
now writeable.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Make sure we do not display the expected error when using podman network
reload. This is already done for iptables-legacy however iptables-nft
creates a slightly different error message so check for this as well.
The error is logged at info level.
[NO TESTS NEEDED] The test VMs do not use iptables-nft so there is no
way to test this. It is already tested for iptables-legacy.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Fixes: https://github.com/containers/podman/issues/9825
Currently we are using TMPDIR for storaing temporary files
when building images, but not when you directly commit the images.
This change simply uses the TMPDIR environment variable if set
to store temporary files.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Since some unit tests use "busybox", we need to point it to some alias
if we want it to pass CI on F34 where we're running in enforced mode.
Furthermore, make sure that the registries.conf can actually be
overridden in the code.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
In contrast to `assert.NoError`, `require.NoError` treats mismatches
fatally which in many cases is necessary to prevent subsequent checks
from segfaulting.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
As part of a fix for an earlier bug (#5698) we added the ability
for Podman to chown volumes to correctly match the user running
in the container, even in adverse circumstances (where we don't
know the right UID/GID until very late in the process). However,
we only did this for volumes created automatically by a
`podman run` or `podman create`. Volumes made by
`podman volume create` do not get this chown, so their
permissions may not be correct. I've looked, and I don't think
there's a good reason not to do this chwon for all volumes the
first time the container is started.
I would prefer to do this as part of volume copy-up, but I don't
think that's really possible (copy-up happens earlier in the
process and we don't have a spec). There is a small chance, as
things stand, that a copy-up happens for one container and then
a chown for a second, unrelated container, but the odds of this
are astronomically small (we'd need a very close race between two
starting containers).
Fixes#9608
Signed-off-by: Matthew Heon <mheon@redhat.com>
Erik Sjolund reported an issue where a badly formated file
could be passed into the `--tz` option and then the date in the container
would be badly messed up:
```
erik@laptop:~$ echo Hello > file.txt
erik@laptop:~$ podman run --tz=../../../home/erik/file.txt --rm -ti
docker.io/library/alpine cat /etc/localtime
Hello
erik@laptop:~$ podman --version
podman version 3.0.0-rc1
erik@laptop:~$
```
This fix checks to make sure the TZ passed in is a valid
value and then proceeds with the rest of the processing.
This was first reported as a potential security issue, but it
was thought not to be. However, I thought closing the hole
sooner rather than later would be good.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Fixes#5788
This commit adds support for named volumes in podman-generate-kube.
Named volumes are output in the YAML as PersistentVolumeClaims.
To avoid naming conflicts, the volume name is suffixed with "-pvc".
This commit adds a corresponding suffix for host path mounts.
Host path volumes are suffixed with "-host".
Signed-off-by: Jordan Williams <jordan@jwillikers.com>
OpenShift Merge Robot
Paul Holzinger
Daniel J Walsh
Matthew Heon
Adrian Reber
Giuseppe Scrivano
Valentin Rothberg
Brent Baude
flouthoc
Paul Holzinger
Ashley Cui
Baron Lenardson
Jhon Honce
Eduardo Vega
Slava Bacherikov
Boaz Shuster
Pablo Correa Gómez
Jakub Guzik
zhangguanzhang
Nalin Dahyabhai
Sebastian Jug
chenkang
Peter Hunt
wuhua.ck
Matthew Heon
なつき
Phoenix The Fallen
TomSweeneyRedHat
Jordan Williams