The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This was inspired by https://github.com/cri-o/cri-o/pull/3934 and
much of the logic for it is contained there. However, in brief,
a named return called "err" can cause lots of code confusion and
encourages using the wrong err variable in defer statements,
which can make them work incorrectly. Using a separate name which
is not used elsewhere makes it very clear what the defer should
be doing.
As part of this, remove a large number of named returns that were
not used anywhere. Most of them were once needed, but are no
longer necessary after previous refactors (but were accidentally
retained).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
If the first time you run podman in a user account you do a
su - USER, and the second time, you run as the logged in USER
podman fails, because it is not handling the tmpdir definition
in the database. This PR fixes this problem.
vendor containers/common v0.11.1
This should fix a couple of issues we have seen in podman 1.9.1
with handling of libpod.conf.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In order to better support kata containers and systemd containers
container-selinux has added new types. Podman should execute the
container with an SELinux process label to match the container type.
Traditional Container process : container_t
KVM Container Process: containre_kvm_t
PID 1 Init process: container_init_t
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
`gocritic` is a powerful linter that helps in preventing certain kinds
of errors as well as enforcing a coding style.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Updates the podman info command to show registries from v1 config file
in the search table format.
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
After a restart, pods and containers both run a refresh()
function to prepare to run after a reboot. Until now, volumes
have not had a similar function, because they had no per-boot
setup to perform.
Unfortunately, this was not noticed when in-memory locking was
introduced to volumes. The refresh() routine is, among other
things, responsible for ensuring that locks are reserved after a
reboot, ensuring they cannot be taken by a freshly-created
container, pod, or volume. If this reservation is not done, we
can end up with two objects using the same lock, potentially
needing to lock each other for some operations - classic recipe
for deadlocks.
Add a refresh() function to volumes to perform lock reservation
and ensure it is called as part of overall refresh().
Fixes#4605Fixes#4621
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Refactor the `RuntimeConfig` along with related code from libpod into
libpod/config. Note that this is a first step of consolidating code
into more coherent packages to make the code more maintainable and less
prone to regressions on the long runs.
Some libpod definitions were moved to `libpod/define` to resolve
circular dependencies.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
if the cgroup manager is set to systemd, detect if dbus is available,
otherwise fallback to --cgroup-manager=cgroupfs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
make sure the user overrides are stored in the configuration file when
first created.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is a horrible hack to work around issues with Fedora 31, but
other distros might need it to, so we'll move it upstream.
I do not recommend this functionality for general use, and the
manpages and other documentation will reflect this. But for some
upgrade cases, it will be the only thing that allows for a
working system.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For future work, we need multiple implementations of the OCI
runtime, not just a Conmon-wrapped runtime matching the runc CLI.
As part of this, do some refactoring on the interface for exec
(move to a struct, not a massive list of arguments). Also, add
'all' support to Kill and Stop (supported by runc and used a bit
internally for removing containers).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
If a user upgrades to a machine that defaults to a cgroups V2 machine
and has a libpod.conf file in their homedir that defaults to OCI Runtime runc,
then we want to change it one time to crun.
runc as of this point does not work on cgroupV2 systems. This patch will
eventually be removed but is needed until runc has support.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If c/storage paths are explicitly set to "" (the empty string) it
will use compiled-in defaults. However, it won't tell us this via
`storage.GetDefaultStoreOptions()` - we just get the empty string
(which can put our defaults, some of which are relative to
c/storage, in a bad spot).
Hardcode a sane default for cases like this. Furthermore, add
some sanity checks to paths, to ensure we don't use relative
paths for core parts of libpod.
Fixes#3952
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
drop the pkg/firewall module and start using the firewall CNI plugin.
It requires an updated package for CNI plugins.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add ability to not activate sd_notify when running under varlink as it
causes deadlocks and hangs.
Fixes: #3572
Signed-off-by: baude <bbaude@redhat.com>
when creating the default libpod.conf file, be sure the default OCI
runtime is cherry picked from the system configuration.
Closes: https://github.com/containers/libpod/issues/3781
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we should be looking for the libpod.conf file in /usr/share/containers
and not in /usr/local. packages of podman should drop the default
libpod.conf in /usr/share. the override remains /etc/containers/ as
well.
Fixes: #3702
Signed-off-by: baude <bbaude@redhat.com>
The `$PATH` environment variable will now used as fallback if no valid
runtime or conmon path matches. The debug logs has been updated to state
the used executable.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
NixOS links the current system state to `/run/current-system`, so we
have to add these paths to the configuration files as well to work out
of the box.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Touch up a number of formating issues for XDG_RUNTIME_DIRS in a number
of man pages. Make use of the XDG_CONFIG_HOME environment variable
in a rootless environment if available, or set it if not.
Also added a number of links to the Rootless Podman config page and
added the location of the auth.json files to that doc.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
When a command (like `ps`) requests no store be created, but also
requires a refresh be performed, we have to ignore its request
and initialize the store anyways to prevent segfaults. This work
was done in #3532, but that missed one thing - initializing a
storage service. Without the storage service, Podman will still
segfault. Fix that oversight here.
Fixes#3625
Signed-off-by: Matthew Heon <mheon@redhat.com>
some podman commands do not require the use of a container/image store.
in those cases, it is more effecient to not open the store, because that
results in having to also close the store which can be costly when the
system is under heavy write I/O loads.
Signed-off-by: baude <bbaude@redhat.com>
at least on Fedora 30 it creates the /run/user/UID directory for the
user logged in via ssh.
This needs to be done very early so that every other check when we
create the default configuration file will point to the correct
location.
Closes: https://github.com/containers/libpod/issues/3410
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we had a regression where the rootless user tried to use the global
configuration file. We should not try to use the global configuration
when running in rootless but only cherry-pick some settings from there
when creating the file for the first time.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Conmon has moved out of cri-o and into it's own dedicated repository.
This commit updates configuration and definitions which referenced
the old cri-o based paths.
Signed-off-by: Chris Evich <cevich@redhat.com>
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
We may want to ship configurations including more than one
runtime configuration - for example, crun and runc and kata, all
configured. However, we don't want to make these extra runtimes
hard requirements, so let's not fatally error when we can't find
their executables.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently we report cgroupmanager default as systemd, even if the user modified
the libpod.conf. Also cgroupmanager does not work in rootless mode. This
PR correctly identifies the default cgroup manager or reports it is not supported.
Also add homeDir to correctly get the homedir if the $HOME is not set. Will
attempt to get Homedir out of /etc/passwd.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- PREFIX is now passed saved in the binary at build-time so that default
paths match installation paths.
- ETCDIR is also overridable in a similar way.
- DESTDIR is now applied on top of PREFIX for install/uninstall steps.
Previously, a DESTDIR=/foo PREFIX=/bar make would install into /bar,
rather than /foo/bar.
Signed-off-by: Lawrence Chan <element103@gmail.com>
add a new configuration `runtime_supports_json` to list what OCI
runtimes support the --log-format=json option. If the runtime is not
listed here, libpod will redirect stdout/stderr from the runtime
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
use a pause process to keep the user and mount namespace alive.
The pause process is created immediately on reload, and all successive
Podman processes will refer to it for joining the user&mount
namespace.
This solves all the race conditions we had on joining the correct
namespaces using the conmon processes.
As a fallback if the join fails for any reason (e.g. the pause process
was killed), then we try to join the running containers as we were
doing before.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
once the default event logger was removed from libpod.conf, we need to
set the default based on whether the systemd build tag is used or not.
Signed-off-by: baude <bbaude@redhat.com>
We want to start supporting the registries.conf format.
Also start showing blocked registries in podman info
Fix sorting so all registries are listed together in podman info.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We merged #2950 with some nits still remaining, as Giuseppe was
going on PTO. This addresses those small requested changes.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it is useful to migrate existing containers to a new version of
podman. Currently, it is needed to migrate rootless containers that
were created with podman <= 1.2 to a newer version which requires all
containers to be running in the same user namespace.
Closes: https://github.com/containers/libpod/issues/2935
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
create immediately a namespace if we need a refresh. This is
necessary to access the rootless storage.
Closes: https://github.com/containers/libpod/issues/2894
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
simplify the rootless implementation to use a single user namespace
for all the running containers.
This makes the rootless implementation behave more like root Podman,
where each container is created in the host environment.
There are multiple advantages to it: 1) much simpler implementation as
there is only one namespace to join. 2) we can join namespaces owned
by different containers. 3) commands like ps won't be limited to what
container they can access as previously we either had access to the
storage from a new namespace or access to /proc when running from the
host. 4) rootless varlink works. 5) there are only two ways to enter
in a namespace, either by creating a new one if no containers are
running or joining the existing one from any container.
Containers created by older Podman versions must be restarted.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
in the few places where we care about skipping the storage
initialization, we can simply use the process effective UID, instead
of relying on a global boolean flag.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Matthew Heon
Daniel J Walsh
Qi Wang
Valentin Rothberg
OpenShift Merge Robot
Brent Baude
José Guilherme Vanz
Nalin Dahyabhai
Peter Hunt
Giuseppe Scrivano
Miloslav Trmač
Sascha Grunert
TomSweeneyRedHat
Matthew Heon
Chris Evich
Marco Vedovati
Jamie Bliss
Lawrence Chan