The swagger api docs used the extra Body struct as part of the request
which is wrong. We just want the plain type.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Network connect now supports setting a static ipv4, ipv6 and mac address
for the container network. The options are added to the cli and api.
Fixes#9883
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We don't yet have a local registry running in the APIv2 tests.
Tested manually.
[NO NEW TESTS NEEDED]
Fixes: https://github.com/containers/podman/issues/12468
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The Docker-compatible REST API has historically behaved just as the rest
of Podman and Buildah (and the atomic Docker in older RHEL/Fedora) where
`containers-registries.conf` is centrally controlling which registries
a short name may resolve to during pull or local image lookups. Please
refer to a blog for more details [1].
Docker, however, is only resolving short names to docker.io which has
been reported (see #12320) to break certain clients who rely on this
behavior. In order to support this scenario, `containers.conf(5)`
received a new option to control whether Podman's compat API resolves
to docker.io only or behaves as before.
Most endpoints allow for directly normalizing parameters that represent
an image. If set in containers.conf, Podman will then normalize the
references directly to docker.io. The build endpoint is an outlier
since images are also referenced in Dockerfiles. The Buildah API,
however, supports specifying a custom `types.SystemContext` in which
we can set a field that enforces short-name resolution to docker.io
in `c/image/pkg/shortnames`.
Notice that this a "hybrid" approach of doing the normalization directly
in the compat endpoints *and* in `pkg/shortnames` by passing a system
context. Doing such a hybrid approach is neccessary since the compat
and the libpod endpoints share the same `libimage.Runtime` which makes
a global enforcement via the `libimage.Runtime.systemContext`
impossible. Having two separate runtimes for the compat and the libpod
endpoints seems risky and not generally applicable to all endpoints.
[1] https://www.redhat.com/sysadmin/container-image-short-namesFixes: #12320
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Prevents temp secrets leaking into image by moving it away from context
directory to parent builder directory. Builder directory automatically
gets cleaned up when we are done with the build.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Podman remote must treat build secrets as part of context directory. If
secret path is absolute path on host copy it to tar file and pass it to
remote server.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Following commit makes sure that `build` api can accept external
secret and allows currently `NOOP` `podman-remote build -t tag
--secret id=mysecret,src=/path/on/remote` to become functional.
Just like `docker` following api is a hidden field and only exposed to
`podman-remote` but could document it if it needs exposed on `swagger`.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
In order to maintain compatiblity with `moby API` we must the field
`errorDetail` which is primary error reporting field with stream.
Currently podman is using `error` which is already deprecated by moby.
Check: https://github.com/moby/moby/blob/master/pkg/jsonmessage/jsonmessage.go#L147
[NO NEW TESTS NEEDED]
We can't test this in podman CI since we dont have a docker client.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Add a new flag to set the start timeout for a generated systemd unit.
To make naming consistent, add a new --stop-timeout flag as well and let
the previous --time map to it.
Fixes: #11618
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Non-podman clients do not set `layers` while making request. This is
supposed to be `true` bydefault but `non-podman-clients i.e Docker` dont
know about this field as a result they end up setting this values to
`false`. Causing builds to never use cache for layers.
Adds compatiblity for `docker SDK`.
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya Rajan <arajan@redhat.com>
There is a problem with creating and storing the exit command when the
container was created. It only contains the options the container was
created with but NOT the options the container is started with. One
example would be a CNI network config. If I start a container once, then
change the cni config dir with `--cni-config-dir` ans start it a second
time it will start successfully. However the exit command still contains
the wrong `--cni-config-dir` because it was not updated.
To fix this we do not want to store the exit command at all. Instead we
create it every time the conmon process for the container is startet.
This guarantees us that the container cleanup process is startet with
the correct settings.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Support `checkpoint --pre-checkpoint`
* Support `checkpoint --with-previous`
* Disable `restore --import-previous` for the remote client since we had
to send two files which in turn would require to tar them up and hence
be a breaking change. Podman 4.0 would be the chance and I hope we'll
find time before that to remote-restore prettier.
Note that I did not run over swagger yet to check whether all parameters
are actually documented due to time constraints.
Fixes: #12334
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Nothing was working before, and it's too much to summarize. To make
sure we're not regressing in the future again, enable the remote e2e
tests.
Fixes: #12007
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This adds the parameter '--print-stats' to 'podman container restore'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to restore a checkpoint and print out these
information. CRIU already creates process restore statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the restored container, Podman will now print
out JSON:
# podman container restore --latest --print-stats
{
"podman_restore_duration": 305871,
"container_statistics": [
{
"Id": "47b02e1d474b5d5fe917825e91ac653efa757c91e5a81a368d771a78f6b5ed20",
"runtime_restore_duration": 140614,
"criu_statistics": {
"forking_time": 5,
"restore_time": 67672,
"pages_restored": 14
}
}
]
}
The output contains 'podman_restore_duration' which contains the
number of microseconds Podman required to restore the checkpoint. The
output also includes 'runtime_restore_duration' which is the time
the runtime needed to restore that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
This adds the parameter '--print-stats' to 'podman container checkpoint'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to create a checkpoint and print out these
information. CRIU already creates checkpointing statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the checkpointed container, Podman will now print
out JSON:
# podman container checkpoint --latest --print-stats
{
"podman_checkpoint_duration": 360749,
"container_statistics": [
{
"Id": "25244244bf2efbef30fb6857ddea8cb2e5489f07eb6659e20dda117f0c466808",
"runtime_checkpoint_duration": 177222,
"criu_statistics": {
"freezing_time": 100657,
"frozen_time": 60700,
"memdump_time": 8162,
"memwrite_time": 4224,
"pages_scanned": 20561,
"pages_written": 2129
}
}
]
}
The output contains 'podman_checkpoint_duration' which contains the
number of microseconds Podman required to create the checkpoint. The
output also includes 'runtime_checkpoint_duration' which is the time
the runtime needed to checkpoint that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
'--memory-swappiness=0' used to work. This patch fixes the regression
issue, which was caused by the change of infra container creation
process.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Docker/Moby always create the working directory, and some tools
rely on that behavior (example, woodpecker/drone).
Fixes#11842
Signed-off-by: Michael Scherer <misc@redhat.com>
* Implement API query parameter stream and delay for containers and
pods top endpoints
* Update swagger with breaking changes
* Add python API tests for endpoints
Fixes#12115
Signed-off-by: Jhon Honce <jhonce@redhat.com>
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We should only use the Containerfiles/Dockerfiles found in the context
directory.
Fixes: https://github.com/containers/podman/issues/12054
[NO NEW TESTS NEEDED] It is difficult to setup a test for this in the
CI/CD system, but build tests should find if this PR broke anything.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
OpenShift Merge Robot
Ananth Bhaskararaman
Paul Holzinger
Valentin Rothberg
Daniel J Walsh
Ondra Machacek
Aditya Rajan
Matej Vasek
Ambrose Chua
Radostin Stoyanov
Michael Scherer
Adrian Reber
Hironori Shiina
Jhon Honce