Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
The initial version of libimage changed the order of layers which has
now been restored to remain backwards compatible.
Further changes:
* Fix a bug in the journald logging which requires to strip trailing
new lines from the message. The system tests did not pass due to
empty new lines. Triggered by changing the default logger to
journald in containers/common.
* Fix another bug in the journald logging which embedded the container
ID inside the message rather than the specifid field. That surfaced
in a preceeding whitespace of each log line which broke the system
tests.
* Alter the system tests to make sure that the k8s-file and the
journald logging drivers are executed.
* A number of e2e tests have been changed to force the k8s-file driver
to make them pass when running inside a root container.
* Increase the timeout in a kill test which seems to take longer now.
Reasons are unknown. Tests passed earlier and no signal-related
changes happend. It may be CI VM flake since some system tests but
other flaked.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure we pass the ip and mac address as CNI_ARGS to
the cnitool which is executed in the rootless-cni-infra
container.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When creating a pod or container where a static MAC or IP address is provided, we should return a proper error and exit as 125.
Fixes: #6972
Signed-off-by: Brent Baude <bbaude@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This will change the default of UserNS to false
Also turn on tests for create_staticip_test.go
run_device_test.go, run_selinux_test.go
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The "create two containers with the same IP" test failed:
https://api.cirrus-ci.com/v1/task/5992323062431744/logs/integration_test.log#t--Podman-create-two-containers-with-the-same-IP
...
(basically, expected error exit code, got 0)
Analysis: the sequence is 'start test1, start test2'. Perhaps it's
possible that 'podman start' exits before the test1 container has
an IP address assigned? There are no checks in the test, so it's
impossible to know what happened.
Solution: add a wait-loop invoking 'podman inspect', waiting
for a nonempty IP address on test 1; then assert that it's
what we expect it to be.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The function to generate random IP addresses during ginkgo tests in
the checkpoint test code is moved to common and all tests using
hardcoded IP addresses have been changed to use random IP addresses to
reduce test errors when running the tests in parallel.
Signed-off-by: Adrian Reber <areber@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
Paul Holzinger
Ed Santiago
Valentin Rothberg
Paul Holzinger
Daniel J Walsh
Brent Baude
Jhon Honce
Adrian Reber
Giuseppe Scrivano
Yiqiao Pu