I noticed that this test will fail its flake rerun because the network
was not removed and it tried to create a network with the same name.
Also network disconnect works rootless now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Write a BeValidJSON() matcher, and replace IsJSONOutputValid():
sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go
(Plus a few manual tweaks)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Many ginkgo tests have been written to use this evil form:
GrepString("foo")
Expect(that to BeTrue())
...which yields horrible useless messages on failure:
false is not true
Identify those (automatically, via script) and convert to:
Expect(output to ContainSubstring("foo"))
...which yields:
"this output" does not contain substring "foo"
There are still many BeTrue()s left. This is just a start.
This is commit 1 of 2. It includes the script I used, and
all changes to *.go are those computed by the script.
Commit 2 will apply some manual fixes.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The podman integration tests run in parallel. Because all tests use the
same CNI config dir the podman network prune test will remove networks
which are used by other tests at the moment and thus creating
unexpected flakes.
The solution use an extra cni config dir for the network prune test.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Creating a macvlan network with the subnet or ipRange option should set
the ipam plugin type to `host-local`. We also have to insert the default
route.
Fixes#10283
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Added ID to default
removed outdated imports
slight refactor
Test Network Headers added to network_test.go
Signed-off-by: Parker Van Roy <pvanroy@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The logic in the e2e test for multiple network aliases is indicating the
test should wait for the containerized nginx to be ready. As this may
take some time, the test does an exponential backoff starting at 2050ms.
Fix the logic by removing the `Expect(...)` call during the exponential
backoff. Otherwise, the test errors immediately.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add the ability to prune unused cni networks. filters are not implemented
but included both compat and podman api endpoints.
Fixes :#8673
Signed-off-by: baude <bbaude@redhat.com>
when creating a macvlan network, we should honor gateway, subnet, and
mtu as provided by the user.
Fixes: #9167
Signed-off-by: baude <bbaude@redhat.com>
instead of using the --macvlan to indicate that you want to make a
macvlan network, podman network create now honors the driver name of
*macvlan*. Any options to macvlan, like the parent device, should be
specified as a -o option. For example, -o parent=eth0.
the --macvlan option was marked as deprecated in the man page but is
still supported for the duration of 3.0.
Signed-off-by: baude <bbaude@redhat.com>
Make sure we pass the network aliases as capability args to the
cnitool in the rootless-cni-infra container. Also update the
dnsname plugin in the cni-infra container.
Fixes#8567
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Unlike the container storage all e2e test are using the same cni
config directory. This causes problems if the network name already
exists. Using random names will make the second run pass even if the
first failed. This is only done to prevent full CI failures.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The network ID is not stored. It is just the sha256 hash from
the network name. There is a risk of a potential hash collision.
However it's very unlikely and even if we hit this it will
complain that more than network with this ID exists.
The main benefit is that the compat api can have proper
network ID support. Also this adds the support for
`podman network ls --format "{{.ID}}"` and `--filter id=<ID>`.
It also ensures that we can do network rm <ID> and network
inspect <ID>.
Since we use a hash this commit is backwards compatible even for
already existing networks.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add label support for podman network create. Use the `args`
field in the cni config file to store the podman labels.
Use `podman_labels` as key name and store the labels as
map[string]string.
For reference: https://github.com/containernetworking/cni/blob/master/CONVENTIONS.md#args-in-network-confighttps://github.com/containernetworking/cni/blob/spec-v0.4.0/SPEC.md#network-configuration
Example snippet:
```
...
"args": {
"podman_labels": {
"key1":"value1",
"key2":"value2"
}
}
...
```
Make podman network list support several filters. Supported filters are name,
plugin, driver and label. Filters with different keys work exclusive. Several label
filters work exclusive and the other filter keys are working inclusive.
Also adjust the compat api to support labels in network create and list.
Breaking changes:
- podman network ls -f shortform is used for --filter instead --format
This matches docker and other podman commands (container ps, volume ps)
- libpod network list endpoint filter parameter is removed. Instead the
filters paramter should be used as json encoded map[string][]string.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
First, make sure we are only trying to remove the network
interface if we are root.
Second, if we cannot get the interface name (e.g macvlan config)
then we should not fail. Just remove the config file.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
this enables the ability to connect and disconnect a container from a
given network. it is only for the compatibility layer. some code had to
be refactored to avoid circular imports.
additionally, tests are being deferred temporarily due to some
incompatibility/bug in either docker-py or our stack.
Signed-off-by: baude <bbaude@redhat.com>
in an effort to speed up the remote testing, we should be using
lookaside storage to avoid pull images as well as importing multiple
images into the RW store.
one test was removed and added into system test by Ed in #8325
Signed-off-by: baude <bbaude@redhat.com>
podman can now support adding network aliases when running containers
(--network-alias). It requires an updated dnsname plugin as well as an
updated ocicni to work properly.
Signed-off-by: baude <bbaude@redhat.com>
We were only including the CNI Network fields in the output of
`podman inspect` when the container was not running. It's simple
enough to fix (populate with empty structs, since we can't fill
anything without a CNI response to get IP address assigned, etc).
This is necessary for Docker compatibility.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currenly if a user specifies the name or ID of an external storage
container, we report an error to them.
buildah from scratch
working-container-2
podman rm working-container-2
Error: no container with name or ID working-container-2 found: no such container
Since the user specified the correct name and the container is in storage we
force them to specify --storage to remove it. This is a bad experience for the
user.
This change will just remove the container from storage. If the container
is known by libpod, it will remove the container from libpod as well.
The podman rm --storage option has been deprecated, and removed from docs.
Also cleaned documented options that are not available to podman-remote.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The network test created config files with random filenames
but the network name was static. Since the tests can run in
parallel podman was not able to distinguish the networks.
We need to make sure that each test has its own config file
and network name. This helps to prevent unnecessary flakes.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We need to handle removal of non existing network.
This allows the `removeCNINetwork` function
always to be called. This is needed by tests which are trying
to remove the network manually in order to prevent flakes.
Fixes#7809
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In podman containers rm and podman images rm, the commands
exit with error code 1 if the object does not exists.
This PR implements similar functionality to volumes, networks, and Pods.
Similarly if volumes or Networks are in use by other containers, and return
exit code 2.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The podman remote client ignored the force option due a typo.
If an error occured the remote client would panic with an
index out of range error.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Usage:
```
$ podman network create foo
$ podman run -d --name web --hostname web --network foo nginx:alpine
$ podman run --rm --network foo alpine wget -O - http://web.dns.podman
Connecting to web.dns.podman (10.88.4.6:80)
...
<h1>Welcome to nginx!</h1>
...
```
See contrib/rootless-cni-infra for the design.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Add the filter option to the libpod endpoint.
Add support for the name filter on the docker endpoint.
Add apiv2 tests for the network list endpoints.
Enable podman network integration tests for remote.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Paul Holzinger
Ed Santiago
Daniel J Walsh
Paul Holzinger
Jakub Guzik
Parker Van Roy
Valentin Rothberg
baude
OpenShift Merge Robot
Matthew Heon
Akihiro Suda