Make sure that containers configured for auto removal
(e.g., via `podman create --rm`) are removed in `podman start`
if starting the container failed.
Fixes: #10935
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When we stop a container we are printing the full id,
this does not match Docker behaviour or the start behavior.
We should be printing the users rawInput when we successfully
stop the container.
Fixes: https://github.com/containers/podman/issues/9386
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Detached containers and detach keys are only created with the podman run, i
exec, and start commands. We do not store the detach key sequence or the
detach flags in the database, nor does Docker. The current code was ignoreing
these fields but documenting that they can be used.
Fix podman create man page and --help output to no longer indicate that
--detach and --detach-keys works.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Most have been fixed, others I replaced with SkipIfRemote
Fix ContainerStart on tunnel, it needs to wait for the exit status
before returning.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove ones that are not needed.
Document those that should be there.
Document those that should be fixed.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When starting a container by using its name as a reference, we should
print the name instead of the ID. We regressed on this behaviour
with commit b4124485ae which made it into Podman v1.6.2.
Kudos to openSUSE testing for catching it. To prevent future
regressions, extend the e2e tests to check the printed container
name/ID.
Reported-by: @sysrich
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
According to the documentation
https://onsi.github.io/gomega/#eventually
> the default value for the polling interval is 10 milliseconds
That is excessively fast given the observed failures in
issue #4021 are always using podman-remote. Lower the interval to
3-seconds, which should be plenty long enough for container removal.
Signed-off-by: Chris Evich <cevich@redhat.com>
Changing the test in WaitWithDefaultTimeout() to use Eventually() and
gexec.Exit(). Using ExitCode() before command has really exited returns
a -1, which can cause issues for tests testing for podman to return
non-zero values.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
enable the ability to start containers from the remote-client. also,
enable start integration tests for remote testing.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
We have little to no testing to make sure we don't break podman image and
podman container commands that wrap traditional commands.
This PR adds tests for each of the commands.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
when starting or running a container that has --rm, if the starting
container fails (like due to an invalid command), the container should
get removed.
Resolves: #1985
Signed-off-by: baude <bbaude@redhat.com>
Because our tests are getting so long, we want to be able to audit which tests are taking
the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore
should be auditable.
Also, make speed improvements to tests by making sure we only unpack caches images that
actually get used.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1178
Approved by: mheon
Valentin Rothberg
Ed Santiago
chenkang
Daniel J Walsh
zhangguanzhang
Brent Baude
Giuseppe Scrivano
Jhon Honce
Chris Evich
Debarshi Ray
Yiqiao Pu
Matthew Heon