The O_PATH flag is a recent addition to the open syscall and is not
present in darwin or in FreeBSD releases before 13.1. The constant is
not present in the FreeBSD version of x/sys/unix since that package
supports FreeBSD 12.3 and later.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
This removes a use of state.NetNS which is a linux-specific field defined
in container_linux.go from the generic container_internal.go, allowing
that to build on non-linux platforms.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
The notify socket can now either be specified via an environment
variable or programatically (where the env is ignored). The
notify mode and the socket are now also displayed in `container inspect`
which comes in handy for debugging and allows for propper testing.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
bump github.com/container-orchestrated-devices/container-device-interface from 0.4.0 to 0.5.0
This requires that the cdi.Registry be instantiated with AutoRefresh disabled for CLI clients.
[NO NEW TESTS NEEDED]
Signed-off-by: Evan Lezar <elezar@nvidia.com>
* Correct spelling and typos.
* Improve language.
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
currently, setting any sort of resource limit in a pod does nothing. With the newly refactored creation process in c/common, podman ca now set resources at a pod level
meaning that resource related flags can now be exposed to podman pod create.
cgroupfs and systemd are both supported with varying completion. cgroupfs is a much simpler process and one that is virtually complete for all resource types, the flags now just need to be added. systemd on the other hand
has to be handeled via the dbus api meaning that the limits need to be passed as recognized properties to systemd. The properties added so far are the ones that podman pod create supports as well as `cpuset-mems` as this will
be the next flag I work on.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
* Replace "setup", "lookup", "cleanup", "backup" with
"set up", "look up", "clean up", "back up"
when used as verbs. Replace also variations of those.
* Improve language in a few places.
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
The nolintlint linter does not deny the use of `//nolint`
Instead it allows us to enforce a common nolint style:
- force that a linter name must be specified
- do not add a space between `//` and `nolint`
- make sure nolint is only used when there is actually a problem
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
if /run is on a volume do not create the file /run/.containerenv as it
would leak outside of the container.
Closes: https://github.com/containers/podman/issues/14577
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Podman and Buildah should use the same code the generate the resolv.conf
file. This mostly moved the podman code into c/common and created a
better API for it so buildah can use it as well.
[NO NEW TESTS NEEDED] All existing tests should continue to pass.
Fixes#13599 (There is no way to test this in CI without breaking the
hosts resolv.conf)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
If a privileged container is running, stops, and the devices on the host
change, such as a USB device is unplugged, then a container would no
longer start. Previously, the devices from the host were only being
added to the container once: when the container was created. Now, this
happens every time the container starts.
I did this by adding a boolean to the container config that indicates
whether to mount all of the devices or not, which can be set via an option.
During spec generation, if the `MountAllDevices` option is set in the
container config, all host devices are added to the container.
Additionally, a couple of functions from `pkg/specgen/generate/config_linux.go`
were moved into `pkg/util/utils_linux.go` as they were needed in
multiple packages.
Closes#13899
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Similar feature was added for named overlay volumes here: https://github.com/containers/podman/pull/12712
Following PR just mimics similar feature for anonymous volumes.
Often users want their anonymous overlayed volumes to be `non-volatile` in nature
that means that same `upper` dir can be re-used by one or more
containers but overall of nature of volumes still have to be overlay
so work done is still on a overlay not on the actual volume.
Following PR adds support for more advanced options i.e custom `workdir`
and `upperdir` for overlayed volumes. So that users can re-use `workdir`
and `upperdir` across new containers as well.
Usage
```console
podman run -it -v /some/path:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh
```
Signed-off-by: Aditya R <arajan@redhat.com>
Most of these are no longer relevant, just drop the comments.
Most notable change: allow `podman kill` on paused containers.
Works just fine when I test it.
Signed-off-by: Matthew Heon <mheon@redhat.com>
When a container is run in the host network namespace we have to keep
the same resolv.conf content and not use the systemd-resolve detection
logic.
But also make sure we still allow --dns options.
Fixes#14055
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The files /etc/hosts, /etc/hostname and /etc/resolv.conf should always
be owned by the root user in the container. This worked correct for
/etc/hostname and /etc/hosts but not for /etc/resolv.conf.
A container run with --userns keep-id would have the reolv.conf file
owned by the current container user which is wrong.
Consolidate some common code in a new helper function to make the code more
cleaner.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the new logic from c/common to create the hosts file. This will help
to better allign the hosts files between buildah and podman.
Also this fixes several bugs:
- remove host entries when container is stopped and has a netNsCtr
- add entries for containers in a pod
- do not duplicate entries in the hosts file
- use the correct slirp ip when an userns is used
Features:
- configure host.containers.internal entry in containers.conf
- configure base hosts file in containers.conf
Fixes#12003Fixes#13224
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is an enhancement proposal for the checkpoint / restore feature of
Podman that enables container migration across multiple systems with
standard image distribution infrastructure.
A new option `--create-image <image>` has been added to the
`podman container checkpoint` command. This option tells Podman to
create a container image. This is a standard image with a single layer,
tar archive, that that contains all checkpoint files. This is similar to
the current approach with checkpoint `--export`/`--import`.
This image can be pushed to a container registry and pulled on a
different system. It can also be exported locally with `podman image
save` and inspected with `podman inspect`. Inspecting the image would
display additional information about the host and the versions of
Podman, criu, crun/runc, kernel, etc.
`podman container restore` has also been extended to support image
name or ID as input.
Suggested-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
It allows to customize the entry that is written to the `/etc/passwd`
file when --passwd is used.
Closes: https://github.com/containers/podman/issues/13185
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Doug Rabson
Matthew Heon
OpenShift Merge Robot
Valentin Rothberg
Evan Lezar
Giuseppe Scrivano
Erik Sjölund
Sascha Grunert
openshift-ci[bot]
cdoern
Paul Holzinger
Jake Correnti
Aditya R
Daniel J Walsh
Jason T. Greene
Radostin Stoyanov