these mount flags are already used for the /dev/shm mount on the host,
but they are not set for the bind mount itself.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Often users want their overlayed volumes to be `non-volatile` in nature
that means that same `upper` dir can be re-used by one or more
containers but overall of nature of volumes still have to be `overlay`
so work done is still on a overlay not on the actual volume.
Following PR adds support for more advanced options i.e custom `workdir`
and `upperdir` for overlayed volumes. So that users can re-use `workdir`
and `upperdir` across new containers as well.
Usage
```console
$ podman run -it -v myvol:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh
```
Signed-off-by: Aditya R <arajan@redhat.com>
This change updates the CDI API to commit 46367ec063fda9da931d050b308ccd768e824364
which addresses some inconistencies in the previous implementation.
Signed-off-by: Evan Lezar <elezar@nvidia.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
For ip/macvlan networks we cannot use the gateway as address for this
hostname. In this case the gateway is normally not on the host so we
just try to use a local ip instead.
[NO NEW TESTS NEEDED] We cannot run macvlan networks in CI.
Fixes#11351
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When Podman is running a container in private IPC mode (default), it
creates a bind mount for /dev/shm that is then attached to a tmpfs
folder on the host file system. However, checkpointing a container has
the side-effect of stopping that container and unmount the tmpfs used
for /dev/shm. As a result, after checkpoint all files stored in the
container's /dev/shm would be lost and the container might fail to
restore from checkpoint.
To address this problem, this patch creates a tar file with the
content of /dev/shm that is included in the container checkpoint and
used to restore the container.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
This ensures that existing containers will still manage
`/etc/passwd` by default, as they have been doing until now. New
containers that explicitly set `false` will still have passwd
management disabled, but otherwise the code will run.
[NO NEW TESTS NEEDED] This will only be caught on upgrade and I
don't really know how to write update tests - and Ed is on PTO.
Signed-off-by: Matthew Heon <mheon@redhat.com>
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves#11805
Signed-off-by: cdoern <cdoern@redhat.com>
Add first non localhost ipv4 of all host interfaces as destination
for host.contaners.internal for rootless containers.
Fixes: https://github.com/containers/podman/issues/12000
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This adds the following information to the output of 'podman inspect':
* CheckpointedAt - time the container was checkpointed
Only set if the container has been checkpointed
* RestoredAt - time the container was restored
Only set if the container has been restored
* CheckpointLog - path to the checkpoint log file (CRIU's dump.log)
Only set if the log file exists (--keep)
* RestoreLog - path to the restore log file (CRIU's restore.log)
Only set if the log file exists (--keep)
* CheckpointPath - path to the actual (CRIU) checkpoint files
Only set if the checkpoint files exists (--keep)
* Restored - set to true if the container has been restored
Only set if the container has been restored
Signed-off-by: Adrian Reber <areber@redhat.com>
The new network db structure stores everything in the networks bucket.
Previously some network settings were not written the the network bucket
and only stored in the container config.
Instead of the old format which used the container ID as value in the
networks buckets we now use the PerNetworkoptions struct there.
To migrate existing users we use the state.GetNetworks() function. If it
fails to read the new format it will automatically migrate the old
config format to the new one. This is allows a flawless migration path.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
While trying to match permissions of target directory podman adds
extra `0111` which should not be needed if target path does not have
execute permission.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
improve the heuristic to detect the scope that was created for the container.
This is necessary with systemd running as PID 1, since it moves itself
to a different sub-cgroup, thus stats would not account for other
processes in the same container.
Closes: https://github.com/containers/podman/issues/12400
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Some field names are confusing. Change them so that they make more sense
to the reader.
Since these fields are only in the main branch we can safely rename them
without worrying about backwards compatibility.
Note we have to change the field names in netavark too.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Honor custom `target` if specified while running or creating containers
with secret `type=mount`.
Example:
`podman run -it --secret token,type=mount,target=TOKEN ubi8/ubi:latest
bash`
Signed-off-by: Aditya Rajan <arajan@redhat.com>
This adds the parameter '--print-stats' to 'podman container restore'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to restore a checkpoint and print out these
information. CRIU already creates process restore statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the restored container, Podman will now print
out JSON:
# podman container restore --latest --print-stats
{
"podman_restore_duration": 305871,
"container_statistics": [
{
"Id": "47b02e1d474b5d5fe917825e91ac653efa757c91e5a81a368d771a78f6b5ed20",
"runtime_restore_duration": 140614,
"criu_statistics": {
"forking_time": 5,
"restore_time": 67672,
"pages_restored": 14
}
}
]
}
The output contains 'podman_restore_duration' which contains the
number of microseconds Podman required to restore the checkpoint. The
output also includes 'runtime_restore_duration' which is the time
the runtime needed to restore that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
This adds the parameter '--print-stats' to 'podman container checkpoint'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to create a checkpoint and print out these
information. CRIU already creates checkpointing statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the checkpointed container, Podman will now print
out JSON:
# podman container checkpoint --latest --print-stats
{
"podman_checkpoint_duration": 360749,
"container_statistics": [
{
"Id": "25244244bf2efbef30fb6857ddea8cb2e5489f07eb6659e20dda117f0c466808",
"runtime_checkpoint_duration": 177222,
"criu_statistics": {
"freezing_time": 100657,
"frozen_time": 60700,
"memdump_time": 8162,
"memwrite_time": 4224,
"pages_scanned": 20561,
"pages_written": 2129
}
}
]
}
The output contains 'podman_checkpoint_duration' which contains the
number of microseconds Podman required to create the checkpoint. The
output also includes 'runtime_checkpoint_duration' which is the time
the runtime needed to checkpoint that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
A rootless container created with a custom userns and forwarded ports
did not work. I refactored the network setup to make the setup logic
more clear.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There was the question about how long it takes to create a checkpoint.
CRIU already provides some statistics about how long it takes to create
a checkpoint and similar.
With this change the file 'stats-dump' is included in the checkpoint
archive and the tool checkpointctl can be used to display these
statistics:
./checkpointctl show -t /tmp/cp.tar --print-stats
Displaying container checkpoint data from /tmp/dump.tar
[...]
CRIU dump statistics
+---------------+-------------+--------------+---------------+---------------+---------------+
| FREEZING TIME | FROZEN TIME | MEMDUMP TIME | MEMWRITE TIME | PAGES SCANNED | PAGES WRITTEN |
+---------------+-------------+--------------+---------------+---------------+---------------+
| 105405 us | 1376964 us | 504399 us | 446571 us | 492153 | 88689 |
+---------------+-------------+--------------+---------------+---------------+---------------+
Signed-off-by: Adrian Reber <areber@redhat.com>
A restored container still had the state set to 'Checkpointed: true'
which seems wrong if it running again.
[NO NEW TESTS NEEDED]
Signed-off-by: Adrian Reber <areber@redhat.com>
This will change mount of /dev within container to noexec, making
containers slightly more secure.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Checkpoint is blowing up when you use --log-driver=none
[NO NEW TESTS NEEDED] No way currently to test checkpoint restore.
Fixes: https://github.com/containers/podman/issues/11974
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This matches what docker does. Also make sure the net aliases are also
shown when the container is stopped.
docker-compose uses this special alias entry to check if it is already
correctly connected to the network. [1]
Because we do not support static ips on network connect at the moment
calling disconnect && connect will loose the static ip.
Fixes#11748
[1] 0bea52b18d/compose/service.py (L663-L667)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Following PR allows containers to create and mount overlays on top of
named volumes instead of mounting actual volumes via already documented `:O`.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Let the gvproxy dns server handle the host.containers.internal entry.
Support for this is already added to gvproxy. [1]
To make sure the container uses the dns response from gvproxy we should
not add host.containers.internal to /etc/hosts in this case.
[NO TESTS NEEDED] podman machine has no tests :/
Fixes#11642
[1] 1108ea4516
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The check for net=none was wrong. It just assumed when we do not create
the netns but have one set that we use the none mode. This however also
applies to a container which joins the pod netns.
To correctly check for the none mode use `config.NetMode.IsNone()`.
Fixes#11596
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When inspecting a container, we now report whether the container
was stopped by a `podman checkpoint` operation via a new bool in
the State portion of inspected, `Checkpointed`.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Make sure that Podman passes the LISTEN_* environment into containers.
Similar to runc, LISTEN_PID is set to 1.
Also remove conditionally passing the LISTEN_FDS as extra files.
The condition was wrong (inverted) and introduced to fix#3572 which
related to running under varlink which has been dropped entirely
with Podman 3.0. Note that the NOTIFY_SOCKET and LISTEN_* variables
are cleared when running `system service`.
Fixes: #10443
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
There are use-cases where users would want to use overlay-mounts as
workdir. For such cases workdir should be resolved after all the mounts
are completed during the container init process.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Giuseppe Scrivano
Aditya Rajan
Valentin Rothberg
Daniel J Walsh
Evan Lezar
OpenShift Merge Robot
Paul Holzinger
Radostin Stoyanov
Matthew Heon
cdoern
Adrian Reber
Parham Alvani
flouthoc