Startup healthchecks are similar to K8S startup probes, in that
they are a separate check from the regular healthcheck that runs
before it. If the startup healthcheck fails repeatedly, the
associated container is restarted.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Motivated to have a working `make lint` on Fedora 37 (beta).
Most changes come from the new `gofmt` standards.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Include the digest of the image in `podman container inspect`. The image
digest is a key information for auditing as it defines the identify of
an image. This way, it can be determined whether a container used an
image with a given CVE etc.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Auto updates using the "registry" policy require container to be created
with a fully-qualified image reference. Short names are not supported
due the ambiguity of their source registry. Initially, container
creation errored out for non FQN images but it seems that Podman has
regressed.
Fixes: #15879
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
We added the concept of image volumes in 2.2.0, to support
inspecting an image from within a container. However, this is a
strictly read-only mount, with no modification allowed.
By contrast, the new `image` volume driver creates a c/storage
container as its underlying storage, so we have a read/write
layer. This, in and of itself, is not especially interesting, but
what it will enable in the future is. If we add a new command to
allow these image volumes to be committed, we can now distribute
volumes - and changes to them - via a standard OCI image registry
(which is rather new and quite exciting).
Future work in this area:
- Add support for `podman volume push` (commit volume changes and
push resulting image to OCI registry).
- Add support for `podman volume pull` (currently, we require
that the image a volume is created from be already pulled; it
would be simpler if we had a dedicated command that did the
pull and made a volume from it)
- Add support for scratch images (make an empty image on demand
to use as the base of the volume)
- Add UOR support to `podman volume push` and
`podman volume pull` to enable both with non-image volume
drivers
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The format used for setting the bind-mount-options annotations
in the kube yaml was incorrect and caused k8s to throw an error
when trying to play the generated kube yaml.
Fix the annotation format to match the rules of k8s.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Compat: Treat already attached networks as a no-op
Applies only to containers in created state. Maintain error in running state.
Co-authored-by: Alessandro Rossi <al.rossi87@gmail.com>
Co-authored-by: Brent Baude <bbaude@redhat.com>
Co-authored-by: Jason T. Greene <jason.greene@redhat.com>
Signed-off-by: Alessandro Rossi <al.rossi87@gmail.com>
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Also, do a general cleanup of all the timeout code. Changes
include:
- Convert from int to *uint where possible. Timeouts cannot be
negative, hence the uint change; and a timeout of 0 is valid,
so we need a new way to detect that the user set a timeout
(hence, pointer).
- Change name in the database to avoid conflicts between new data
type and old one. This will cause timeouts set with 4.2.0 to be
lost, but considering nobody is using the feature at present
(and the lack of validation means we could have invalid,
negative timeouts in the DB) this feels safe.
- Ensure volume plugin timeouts can only be used with volumes
created using a plugin. Timeouts on the local driver are
nonsensical.
- Remove the existing test, as it did not use a volume plugin.
Write a new test that does.
The actual plumbing of the containers.conf timeout in is one line
in volume_api.go; the remainder are the above-described cleanups.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Integrate sd-notify policies into `kube play`. The policies can be
configured for all contianers via the `io.containers.sdnotify`
annotation or for indidivual containers via the
`io.containers.sdnotify/$name` annotation.
The `kube play` process will wait for all containers to be ready by
waiting for the individual `READY=1` messages which are received via
the `pkg/systemd/notifyproxy` proxy mechanism.
Also update the simple "container" sd-notify test as it did not fully
test the expected behavior which became obvious when adding the new
tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The notify socket can now either be specified via an environment
variable or programatically (where the env is ignored). The
notify mode and the socket are now also displayed in `container inspect`
which comes in handy for debugging and allows for propper testing.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
added the following flags and handling for podman pod create
--memory-swap
--cpuset-mems
--device-read-bps
--device-write-bps
--blkio-weight
--blkio-weight-device
--cpu-shares
given the new backend for systemd in c/common, all of these can now be exposed to pod create.
most of the heavy lifting (nearly all) is done within c/common. However, some rewiring needed to be done here
as well!
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Update the init container type default to once instead
of always to match k8s behavior.
Add a new annotation that can be used to change the init
ctr type in the kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* Correct spelling and typos.
* Improve language.
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
Since conmon-rs also uses this code we moved it to c/common. Now podman
should has this also to prevent duplication.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
add support for the --uts flag in pod create, allowing users to avoid
issues with default values in containers.conf.
uts follows the same format as other namespace flags:
--uts=private (default), --uts=host, --uts=ns:PATH
resolves#13714
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Previously, if a container had healthchecks disabled in the
docker-compose.yml file and the user did a `podman inspect <container>`,
they would have an incorrect output:
```
"Healthcheck":{
"Test":[
"CMD-SHELL",
"NONE"
],
"Interval":30000000000,
"Timeout":30000000000,
"Retries":3
}
```
After a quick change, the correct output is now the result:
```
"Healthcheck":{
"Test":[
"NONE"
]
}
```
Additionally, I extracted the hard-coded strings that were used for
comparisons into constants in `libpod/define` to prevent a similar issue
from recurring.
Closes: #14493
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
using the new resource backend, implement podman pod create --memory which enables
users to modify memory.max inside of the parent cgroup (the pod), implicitly impacting all
children unless overriden
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Libpod requires that all volumes are stored in the libpod db. Because
volume plugins can be created outside of podman, it will not show all
available plugins. This podman volume reload command allows users to
sync the libpod db with their external volume plugins. All new volumes
from the plugin are also created in the libpod db and when a volume from
the db no longer exists it will be removed if possible.
There are some problems:
- naming conflicts, in this case we only use the first volume we found.
This is not deterministic.
- race conditions, we have no control over the volume plugins. It is
possible that the volumes changed while we run this command.
Fixes#14207
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit addresses three intertwined bugs to fix an issue when using
Gitlab runner on Podman. The three bug fixes are not split into
separate commits as tests won't pass otherwise; avoidable noise when
bisecting future issues.
1) Podman conflated states: even when asking to wait for the `exited`
state, Podman returned as soon as a container transitioned to
`stopped`. The issues surfaced in Gitlab tests to fail [1] as
`conmon`'s buffers have not (yet) been emptied when attaching to a
container right after a wait. The race window was extremely narrow,
and I only managed to reproduce with the Gitlab runner [1] unit
tests.
2) The clearer separation between `exited` and `stopped` revealed a race
condition predating the changes. If a container is configured for
autoremoval (e.g., via `run --rm`), the "run" process competes with
the "cleanup" process running in the background. The window of the
race condition was sufficiently large that the "cleanup" process has
already removed the container and storage before the "run" process
could read the exit code and hence waited indefinitely.
Address the exit-code race condition by recording exit codes in the
main libpod database. Exit codes can now be read from a database.
When waiting for a container to exit, Podman first waits for the
container to transition to `exited` and will then query the database
for its exit code. Outdated exit codes are pruned during cleanup
(i.e., non-performance critical) and when refreshing the database
after a reboot. An exit code is considered outdated when it is older
than 5 minutes.
While the race condition predates this change, the waiting process
has apparently always been fast enough in catching the exit code due
to issue 1): `exited` and `stopped` were conflated. The waiting
process hence caught the exit code after the container transitioned
to `stopped` but before it `exited` and got removed.
3) With 1) and 2), Podman is now waiting for a container to properly
transition to the `exited` state. Some tests did not pass after 1)
and 2) which revealed the third bug: `conmon` was executed with its
working directory pointing to the OCI runtime bundle of the
container. The changed working directory broke resolving relative
paths in the "cleanup" process. The "cleanup" process error'ed
before actually cleaning up the container and waiting "main" process
ran indefinitely - or until hitting a timeout. Fix the issue by
executing `conmon` with the same working directory as Podman.
Note that fixing 3) *may* address a number of issues we have seen in the
past where for *some* reason cleanup processes did not fire.
[1] https://gitlab.com/gitlab-org/gitlab-runner/-/issues/27119#note_970712864
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
[MH: Minor reword of commit message]
Signed-off-by: Matthew Heon <mheon@redhat.com>
The nolintlint linter does not deny the use of `//nolint`
Instead it allows us to enforce a common nolint style:
- force that a linter name must be specified
- do not add a space between `//` and `nolint`
- make sure nolint is only used when there is actually a problem
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
add an option to configure the driver timeout when creating a volume.
The default is 5 seconds but this value is too small for some custom drivers.
Signed-off-by: cdoern <cdoern@redhat.com>
The Authorization field lists the plugins for granting access to the
Docker daemon. This field will always be nil for Podman as there is no
daemon. The field is included for compatibility.
```release-note
NONE
```
[NO NEW TESTS NEEDED]
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The init binary until now has been bind-mounted to /dev/init which
breaks when bind-mounting to /dev. Instead mount the init to
/run/podman-init. The reasoning for using /run is that it is already
used for other runtime data such as secrets.
Fixes: #14251
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add the notion of a "service container" to play kube. A service
container is started before the pods in play kube and is (reverse)
linked to them. The service container is stopped/removed *after*
all pods it is associated with are stopped/removed.
In other words, a service container tracks the entire life cycle
of a service started via `podman play kube`. This is required to
enable `play kube` in a systemd unit file.
The service container is only used when the `--service-container`
flag is set on the CLI. This flag has been marked as hidden as it
is not meant to be used outside the context of `play kube`. It is
further not supported on the remote client.
The wiring with systemd will be done in a later commit.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
In support of podman machine and its counterpart desktop, we have added
new stats to podman info.
For storage, we have added GraphRootAllocated and GraphRootUsed in
bytes.
For CPUs, we have added user, system, and idle percents based on
/proc/stat.
Fixes: #13876
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It seems this breaks older version of `podman-remote` users hence it
looks like this patch would be a better candidate for podman `5.0`
Problem
* Client with `4.0` cannot interact with a server of `4.1`
Plan this patch for podman `5.0`
This reverts commit 0cebd158b6.
Signed-off-by: Aditya R <arajan@redhat.com>
This is an enhancement proposal for the checkpoint / restore feature of
Podman that enables container migration across multiple systems with
standard image distribution infrastructure.
A new option `--create-image <image>` has been added to the
`podman container checkpoint` command. This option tells Podman to
create a container image. This is a standard image with a single layer,
tar archive, that that contains all checkpoint files. This is similar to
the current approach with checkpoint `--export`/`--import`.
This image can be pushed to a container registry and pulled on a
different system. It can also be exported locally with `podman image
save` and inspected with `podman inspect`. Inspecting the image would
display additional information about the host and the versions of
Podman, criu, crun/runc, kernel, etc.
`podman container restore` has also been extended to support image
name or ID as input.
Suggested-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
Convert container entrypoint from string to an array inorder to make
sure there is parity between `podman inspect` and `docker inspect`
Signed-off-by: Aditya R <arajan@redhat.com>
We can just calculate the cpu percent for the time the container is
running. There is no need to use datapoints.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Improve our compatibility with Docker by better handling the
state strings that we print in `podman ps`. Docker capitalizes
all states in `ps` (we do not) - fix this in our PS code. Also,
stop normalizing ContainerStateConfigured to the "Created" state,
and instead make it always be Created, with the existing Created
state becoming Initialized.
I didn't rename the actual states because I'm somewhat reticent
to make such a large change a day before we leave for break. It's
somewhat confusing that ContainerStateConfigured now returns
Created, but internally and externally we're still consistent.
[NO NEW TESTS NEEDED] existing tests should catch anything that
broke.
I also consider this a breaking change. I will flag appropriately
on Github.
Fixes RHBZ#2010432 and RHBZ#2032561
Signed-off-by: Matthew Heon <mheon@redhat.com>
Matthew Heon
Valentin Rothberg
OpenShift Merge Robot
Urvashi Mohnani
Doug Rabson
Alessandro Rossi
Daniel J Walsh
Matthew Heon
Charlie Doern
Erik Sjölund
openshift-ci[bot]
Paul Holzinger
Sascha Grunert
Jake Correnti
Jhon Honce
Jakob Ahrer
Brent Baude
Aditya R
Radostin Stoyanov
John Matthews
LStandman
Valentin Rothberg