We are inconsistent on the name, we should stick with rootfull.
[NO NEW TESTS NEEDED] Existing tests should handle this and no tests for
machines exists yet.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow users to inspect their podman virtual machines. This will be
helpful for debug and development alike, because more details about the
machine can be collected.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Certain paths like `../containers/podman/machine/my-test/podman.sock`
do not exist when machine is not started, so removing a machine before
starting it will result in ENOENT which we should ignore cause these
paths do not exists
Closes: https://github.com/containers/podman/issues/13834
[NO TESTS NEEDED]
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
to avoid errors on macos, we use symlinks to long socket names.
Fixes: #12751Fixes: #13609
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
This PR further implements a more structured approach to handling the
files needed by machine. More files are now made as MachineFile which
can then have a symlink (using a shorter path) to them. Also added Set
and Get methods for many of the files.
The next part of the refactor will implement the use of symlinks on
MacOS.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
If podman detects a Machinev1 config, it will automatically migrate it
to the new format.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
the way machine was written was very adjunct and as such is in dire need
of refactoring to better structures and structure methods where
appropriate. the weekest part is specifically around all the files that
machine requires and how some are just dynamically built on the fly.
this pr defines a new machinefile type which allows us to work with the
file and also takes into account the use of symlinks which are going to
be needed on macos due to its relatively short file length restriction.
also, added unit tests for new methods as well as anywhere else I saw a
need.
Signed-off-by: Brent Baude <bbaude@redhat.com>
WalkDir should be faster the Walk, since we often do
not need to stat files.
[NO NEW TESTS NEEDED] Existing tests should find errors.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When podman gets an error it prints out "Error: " before
printing the error string. If the error message starts with
error, we end up with
Error: error ...
This PR Removes all of these stutters.
logrus.Error() also prints out that this is an error, so no need for the
error stutter.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Use logrus.IsLevelEnabled because this will cover all levels below it as
well. Currently this condition would fail for the trace log level.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We store the full path to qemu in the machine config. When the path
changes on the host the machine can longer be started. To fix it we get
the path again when we fail to start the machine due the missing binary.
We want to store and use the full path first because otherwise existing
machines can break when the qemu version changed.
[NO NEW TESTS NEEDED] We still have no machine tests.
Fixes#13394
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When starting a VM that has been configured with volume mounts, the
podman client attempts to connect via TCP to localhost, which runs
gvproxy to proxy an ephemeral port to the VM's ssh port. Previously,
gvproxy was listening on all interfaces and IP addresses, but this
behavior has changed to listening only on the IPv4 loopback address.
Without this change, if a newer build of gvproxy is used, a podman
machine configured with volume mounts will hang forever after "podman
machine start" with "Waiting for VM ...".
[NO NEW TESTS NEEDED]
Signed-off-by: Burt Holzman <burt@fnal.gov>
Still an unknown number remains but I am running out of patience.
Adding dots is not the best use of my time.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* supports Go 1.18
* disable a number of new linters
* fix minor stylecheck issues
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
If you want to remove a running machine, you can now pass the --force/-f
to podman machine rm and the machine will be stopped and removed without
confirmations.
Fixes: #13448
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Enable support of virtfs in Podman and darwin. At the time of this writing, it requires a special patch not yet included in upstream qemu.
* Prefer to use a specially built qemu to support virtfs. The qemu is installed under libexec/podman.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Set proxy settings (such as `HTTP_PROXY`, and others)
for the whole guest OS with setting up `DefaultEnvironment`
with a `systemd` configuration file `default-env.conf`,
a `profile.d` scenario file - `default-env.sh` and
a `environment.d` configuration file `default-env.conf`
The **actual** environment variables are read by podman
at a start, then they are encrypted with base64 into
a single string and after are provided into a VM through
QEMU Firmware Configuration (fw_cfg) Device
Inside a VM a systemd service `envset-fwcfg.service`
reads the providead encrypted string from fw_cfg, decrypts
and then adds to the files
- `/etc/systemd/system.conf.d/default-env.conf`
- `/etc/profile.d/default-env.sh`
- `/etc/environment.d/default-env.conf`
At the end this service execute `systemctl daemon-reload`
to propagate new variables for systemd manager
[NO NEW TESTS NEEDED]
Closes#13168
Signed-off-by: esendjer <esendjer@gmail.com>
After refactoring Stop(), mounting volumes was hanging in Start().
Restore the conditional, and add error reporting from isListening.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
if users run podman machine stop && podman machine ls, the status of the
machine in the subsequent ls command would running. now we wait for
everything to complete for stop so that scripting is more accurate.
Fixes: #12815
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Use the same type of mounts for all the machine volumes.
The default could change in the future, depending on OS.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
There are other mount types available, such as NFS or SMB,
or one could use reverse sshfs for better compatibility.
It could either be a global option, or it could perhaps be
overridden for each volume (like the container volumes).
Refactor the creation of the options string or array.
Allow specifying the volume as read-only, if desired.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Allow using the built-in 9pfs feature of qemu,
mounting host directories into vm mountpoints.
The volumes are generic, the mounts are specific.
Wait for the machine to be "running", otherwise
the SSH function might throw an error instead.
Increase the default msize from 8 KiB to 128 KiB
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Added an option to podman machine init to declare the timezone of the
resulting machine. the default is to use the value of the host name or
else a given timezone name like America/Chicago.
Fixes: #11895
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
This commits adds port forwarding logic directly into podman. The
podman-machine cni plugin is no longer needed.
The following new features are supported:
- works with cni, netavark and slirp4netns
- ports can use the hostIP to bind instead of hard coding 0.0.0.0
- gvproxy no longer listens on 0.0.0.0:7777 (requires a new gvproxy
version)
- support the udp protocol
With this we no longer need podman-machine-cni and should remove it from
the packaging. There is also a change to make sure we are backwards
compatible with old config which include this plugin.
Fixes#11528Fixes#11728
[NO NEW TESTS NEEDED] We have no podman machine test at the moment.
Please test this manually on your system.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Daniel J Walsh
Brent Baude
Aditya R
OpenShift Merge Robot
Jason T. Greene
Paul Holzinger
Burt Holzman
Valentin Rothberg
Thibault Gagnaux
esendjer
Anders F Björklund
Valentin Rothberg
Jason T. Greene
Ashley Cui