Migrate the podman create and commit subcommandis to leverage the images library. I also had
to migrate the cmd/ portions of run and rmi.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #498
Approved by: mheon
As Matt pointed out, when running sleep in a container, the clean up was taking a
full ten seconds to stop container because sleep does not catch SIGTERM which is
the default podman stop signal and it had to wait for SIGKILL. Changing sleep to
top should result in better test times.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #492
Approved by: rhatdan
As podman-images(1) had some issues correctly reporting all RepoTags of
an image (in the default format), extend the e2e tests to avoid running
into similar in the future.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #477
Approved by: rhatdan
Some of the paths in the e2e tests are hard-coded, which complicates
testing a bit on systems with different paths for runc, conmon, etc.
Add a make shell target to the Makefile, which will build and run the
libpod containers, giving a shell to the user in which podman can be
built, run, tested etc.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #481
Approved by: rhatdan
Due to the way ps arguments work, it was possible to display pids
that dont below to the container in top output. We now filter pids
that dont belong to the container out of the output. This also means
the pid column must be present in the output or we throw an error.
This resolves issue #391
Signed-off-by: baude <bbaude@redhat.com>
Closes: #400
Approved by: rhatdan
When trying to tag an alias (tag) of an image using only the shortname
and no tag, we were unable to find the image in storage. This corrects
that issue and adds an integration test to protect against regression. I
also updated the man page per the filed issue.
While writing the integration test, I discovered that inspect could also
not find a tagged image without its :tag.
Resolves Issue #385
Resolves Issue #384
Signed-off-by: baude <bbaude@redhat.com>
Closes: #398
Approved by: mheon
When creating container storage by name, if that name is a tagged image then the storage
could not be found. We now use the image id which seems more reliable. Also added an
integration test to protect against regression.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #393
Approved by: mheon
The exit codes for 126 and 127 were reversed. For the record, the exit
codes used are as follows:
* 125 if ‘chroot’ itself fails
* 126 if COMMAND is found but cannot be invoked
* 127 if COMMAND cannot be found
This resolves issue #367
Signed-off-by: baude <bbaude@redhat.com>
Closes: #378
Approved by: baude
Inspect should be able to inspect one or more containers depending
on the user input. Therefore, inspect output should be in array
format so the consumer could potentially iterate it. This PR allows
users to specify one more or containers|images|or a mix for
inspection. The output, as stated, is therefore in array form. This
holds true even for a singular image.
In the case that the user enters an invalid container|image "name", we
handle that gracefully. Podman will output json for the valid names
until it reaches the invalid one. For example:
In this case, podman will out the json for alpine and then print an
error about 123 being invalid. It will not continute onto busybox.
This behavior imatates docker.
This addresses issue #360
Signed-off-by: baude <bbaude@redhat.com>
Closes: #371
Approved by: baude
Previous code was using slow routines to collect some of the information
needed to output images. Specifically size was being calculated instead
of using the cached, already known size already available. Also, straight-
lined several of the code paths. Overall assessment is that these
improvements cut the time for images in half.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #365
Approved by: mheon
We should be able to run nested podman containers in particular
for our testing environment. i.e. eat our own dog food.
Some privileges had to be corrected in order for this to work
correctly.
Added a third papr target that runs podman tests inside podman. I
marked the test as not required right now as we get more confident
in the results
Signed-off-by: baude <bbaude@redhat.com>
Closes: #340
Approved by: rhatdan
When using podman to pull an image, print the image id after
the image is pulled.
Resolves issue #329
Signed-off-by: baude <bbaude@redhat.com>
Closes: #342
Approved by: rhatdan
When an image does not have an ENTRYPOINT nor a CMD and the
user does not provide a command in the CLI, we should fail
gracefully.
This resolves issue #328
Signed-off-by: baude <bbaude@redhat.com>
Closes: #333
Approved by: mheon
When running a privileged container, it should inherit the same
devices the host has.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #330
Approved by: mheon
Changing these fields caused the output of podman inspect to more
closely match docker inspect.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #306
Approved by: mheon
When an image has an ENTRYPOINT defined, we should be honoring it. The
problem is described in issue #321.
Also, added buildah binary to test runtimes for testing entrypoint and
will also allow us to test podman build as well.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #322
Approved by: rhatdan
Rework port code for generalized clean up and to address
issue #269 where additional portbindings between host
and containers we being introduced by error.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #308
Approved by: mheon
Fix issues with tailing of container logs as described
in issue #16. Also add in the ability to use a duration or
known time stamp formats for the --since flag.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #317
Approved by: mheon
Completion of the migration from bats to ginkgo. This includes:
* load
* mount
* pause
* port
* run_networking
* search
Note: build will be done within a different PR
Signed-off-by: baude <bbaude@redhat.com>
If the output is to a terminal, return a new line at the end of the
output so that the output is visually appealing. If the output is being
piped, or saved to a file, basically not being outputted to a terminal, do
not print a new line at the end of the output. This ensures any further data
manipulation with the results happens smoothly without requiring to remember
the '/n' at the end of the output.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Made a change to make sure that the output paths of podman inspect
matches that of docker inspect. For example to get the stop signal
you should be able to do podman inspect ctr --format {{.Config.StopSignal}}
and the same thing in docker will give the same results.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #292
Approved by: rhatdan
podman search queries a registry for a matching image and prints
the output.
I added a new flag called "registry" giving the user the option
to search a specific registry if they don't want to search all
their default registries.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #241
Approved by: rhatdan
baude
Matthew Heon
Daniel J Walsh
Matthew Heon
Yiqiao Pu
Valentin Rothberg
Valentin Rothberg
umohnani8
TomSweeneyRedHat
Giuseppe Scrivano
Jhon Honce