in an effort to speed up the remote testing, we should be using
lookaside storage to avoid pull images as well as importing multiple
images into the RW store.
one test was removed and added into system test by Ed in #8325
Signed-off-by: baude <bbaude@redhat.com>
if --userns=keep-id is specified and not --user is specified, take the
unprivileged capabilities code path so that ambient capabilities are
honored in the container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if the kernel supports ambient capabilities (Linux 4.3+), also set
them when running with euid != 0.
This is different that what Moby does, as ambient capabilities are
never set.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Currenly if a user specifies the name or ID of an external storage
container, we report an error to them.
buildah from scratch
working-container-2
podman rm working-container-2
Error: no container with name or ID working-container-2 found: no such container
Since the user specified the correct name and the container is in storage we
force them to specify --storage to remove it. This is a bad experience for the
user.
This change will just remove the container from storage. If the container
is known by libpod, it will remove the container from libpod as well.
The podman rm --storage option has been deprecated, and removed from docs.
Also cleaned documented options that are not available to podman-remote.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If user sets namespace to host, then default sysctls need to be ignored
that are specific to that namespace.
--net=host ignore sysctls that begin with net.
--ipc=host ignore fs.mqueue
--uts=host ignore kernel.domainname and kernel.hostname
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently the --pull missing|always|never is ignored
This PR implements this for local API. For remote we
need to default to pullpolicy specified in the containers.conf
file.
Also fixed an issue when images were matching other images names
based on prefix, causing images to always be pulled.
I had named an image myfedora and when ever I pulled fedora, the system
thought that it there were two images named fedora since it was checking
for the name fedora as well as the prefix fedora. I changed it to check
for fedora and the prefix /fedora, to prefent failures like I had.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We need to get more tests running in rootless mode. Since cgroupsV2 allows
management of cgroups in rootless environments a lot of more tests can be run.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Now that Dan has added helpful comments to each SkipIfRemote,
let's take the next step and include those messages in the
Skip() output so someone viewing test results can easily
see if a remote test is skipped for a real reason or for
a FIXME.
This commit is the result of a simple:
perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go
in the test/e2e directory, with a few minor (manual) changes
in wording.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Remove ones that are not needed.
Document those that should be there.
Document those that should be fixed.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a bunch of tests to ensure that --volumes-from
works as expected.
Also align the podman create and run man page.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Enables podman create, pull, run, import to use --signature-policy option. Set it as hidden flag to be consistent with other commands.
Signed-off-by: Qi Wang <qiwan@redhat.com>
During the redesign of podman 2.0, we dropped the support for --oom-score-adj.
Test for this flag was bogus and thus passing when it was broken.
Basically just need to set the value in the spec.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877187
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The system defaults /run to "exec" mode, and we default --read-only
mounts on /run to "exec", so --systemd should follow suit.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With previous versions of Podman (like v1.9.2) it was always possible to
specify the log level in any case, for example `INFO`. This behavior has
silently changed, where the `--log-level` flag only accepts lower case
levels. This commit re-enables the old behavior and adds an e2e test for
it.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Fixes: 4c75fe3f70 ("fix pod creation with "new:" syntax")
Commit 4c75fe3f70 passes all net options to the pod but forgot
to unset the options for the container creation. This leads to
erros when using flags like `--ip` since we tried setting
the ip on the pod and container which obviously fails.
I didn't notice the bug because we don't throw an error when
specifing port bindings on a container which joins the pods
network namespace. (#7373)
Also allow the use of `--hostname` and pass that option to the
pod and unset it for the container. The container has to use
the pods hostname anyway. This would error otherwise.
Added tests to prevent regression.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
it allows to customize the options passed down to the OCI runtime for
setting up the /proc mount.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
To sync the behavior between AppArmor and seccomp it is now possible to
also specify seccomp profiles for privileged containers.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
This matches Docker behavior, and seems to make sense - the CMD
may have been specific to the original entrypoint and probably
does not make sense if it was changed.
While we're in here, greatly simplify the logic for populating
the SpecGen's Command. We create the full command when making the
OCI spec, so the client should not be doing any more than setting
it to the Command the user passed in, and completely ignoring
ENTRYPOINT.
Fixes#7115
Signed-off-by: Matthew Heon <mheon@redhat.com>
Allow to create a devpts mount.
This is useful for containers that bind mount /dev/ from the host but
at the same time want to create a terminal.
It can be used as:
podman run -v /dev:/dev --mount type=devpts,target=/dev/pts ...
Closes: https://github.com/containers/podman/issues/6804
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
A recent crun change stopped the creation of the container's
working directory if it does not exist. This is arguably correct
for user-specified directories, to protect against typos; it is
definitely not correct for image WORKDIR, where the image author
definitely intended for the directory to be used.
This makes Podman create the working directory and chown it to
container root, if it does not already exist, and only if it was
specified by an image, not the user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When you execute podman create/run with the --pod new:<name> syntax
the pod was created but the namespaces where not shared and
therefore containers could not communicate over localhost.
Add the default namespaces and pass the network options to the
pod create options.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
Currently we are sending over pids-limits from the user even if they
never modified the defaults. The pids limit should be set at the server
side unless modified by the user.
This issue has led to failures on systems that were running with cgroups V1.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
With Podman v2.0, we broke (or thought we were going to break)
using `--privileged` with `--group-add` and `--security-opt`
(specifically using `--security-opt` for SELinux config).
Signed-off-by: Matthew Heon <mheon@redhat.com>
This will allow containers that connect to the network namespace be
able to use the container name directly.
For example you can do something like
podman run -ti --name foobar fedora ping foobar
While we can do this with hostname now, this seems more natural.
Also if another container connects on the network to this container it
can do
podman run --network container:foobar fedora ping foobar
And connect to the original container,without having to discover the name.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a `--replace` flag to the `container {create,run}` commands.
If another container with the same name already exists, it will
be replaced and removed.
Adding this flag is motivated by #5485 to make running Podman in systemd
units (or any other scripts/automation) more robust. In case of a
crash, a container may not be removed by a sytemd unit anymore. The
`--replace` flag allows for supporting crashes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When using varlink we want to make sure that user specified environment variables
take precedence over http-proxy environment.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Daniel J Walsh
baude
Giuseppe Scrivano
zhangguanzhang
Ed Santiago
Paul Holzinger
Qi Wang
Sascha Grunert
OpenShift Merge Robot
Matthew Heon
Matthew Heon
Ashley Cui
Valentin Rothberg
Joseph Gooch