`podman play kube` tries to build images even if `--build` is set to
false so lets honor that and make `--build` , `true` by default so it
matches the original behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
Add a extra `See 'podman command --help'` to the error output.
With this patch you now get:
```
$ podman run -h
Error: flag needs an argument: 'h' in -h
See 'podman run --help'
```
Fixes#13082Fixes#13002
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
I do not know why this code was added but it is wrong. We should never
use a plugin dir as config dir. Also this will fail for netavark. The
correct default will be set in c/common so podman should not touch it.
[NO NEW TESTS NEEDED]
Ref #13183
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
podman system prune should also remove all networks. When we want to
users to migrate to the new network stack we recommend to run podman
system reset. However this did not remove networks and if there were
still networks around we would continue to use cni since this was
considered an old system.
There is one exception for the default network. It should not be removed
since this could cause other issues when it no longer exists. The
network backend detection logic ignores the default network so this is
fine.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Alpine does not seem to use search correctly when there are multiple
search domains on the same line. It only uses the first with the advent.
When podman runs within a separate network we are appending on
dns.podman as a search, if you add a search domain, then this causes the
local search on network to fail.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
[NO NEW TESTS NEEDED] image scp was reading the localhost syntax too loosely causing some errors with domains or hosts containing the word
localhost. Fixed that and added a few lines to make sure the pure localhost connections do not touch sshd
resolves#13021
Signed-off-by: cdoern <cdoern@redhat.com>
podman network create --subnet, --gateway and --ip-range can now be
specified multiple times to join the network to more than one subnet.
This is very useful if you want to use a dual stack network and assign a
fixed ipv4 and ipv6 subnet. The order of the options is important here,
the first --gateway/--ip-range will be assigned to the first subnet and
so on.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bumps Buildah to v1.24.0 and adopts the new values for pull:
true, false, never, and always. The pull-never and pull-always options
for the build command are still usable, but they have been removed from
the man page documentation with this change.
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
machinectl does not propogate error messages and adds extra lines in the output, exec.Cmd is able to clear the env besides PATH and TERM,
and use the given UID and GID to execute the command properly.
machinectl is still used to create a user session. Ubuntu support is limited by this.
Signed-off-by: cdoern <cdoern@redhat.com>
When we run rootless buildah needs to have IsolationOCIRootless set
otherwise it will run code which cannot be used as rootless user.
Podman should use the buildah default if possible and change it to
rootless mode if needed.
[NO NEW TESTS NEEDED] Should be covered by existing tests once we have
podman-remote rootless tests.
Fixes#12989
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Before this PR, the podman --help command shows the defaults
as runc and overlay even if the storage.conf and containers.conf
files do not match. This PR changes them to show the actual defaults
and in the case of storage driver, does not show the default at all.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Heuristic to initialize TunnelMode/remote podman:
- Podman built with remote tag
- Podman running on darwin or windows GOOS
- CONTAINER_HOST or CONTAINER_CONNECTION set in environment
- --remote flag given on command line
- From containers.conf, Engine.Remote == true and GOOS == linux
Otherwise, podman will run in ABIMode/linked against libpod library.
Fixes#12866
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This commit includes:
* Handlers for generate systemd unit
with manually defined dependencies such as:
Wants=, After= and Requires=
* The new unit and e2e tests for checking generated systemd units
for container and pod with custom dependencies
* Documented descriptions for custom dependencies options
Signed-off-by: Eugene (Evgenii) Shubin <esendjer@gmail.com>
Since this option will also be used for netavark we should rename it to
something more generic. It is important that --cni-config-dir still
works otherwise we could break existing container cleanup commands.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Improve our compatibility with Docker by better handling the
state strings that we print in `podman ps`. Docker capitalizes
all states in `ps` (we do not) - fix this in our PS code. Also,
stop normalizing ContainerStateConfigured to the "Created" state,
and instead make it always be Created, with the existing Created
state becoming Initialized.
I didn't rename the actual states because I'm somewhat reticent
to make such a large change a day before we leave for break. It's
somewhat confusing that ContainerStateConfigured now returns
Created, but internally and externally we're still consistent.
[NO NEW TESTS NEEDED] existing tests should catch anything that
broke.
I also consider this a breaking change. I will flag appropriately
on Github.
Fixes RHBZ#2010432 and RHBZ#2032561
Signed-off-by: Matthew Heon <mheon@redhat.com>
This commit unifies the method of filters parsing in cmd.
It removes also the function redundancy.
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
* Update method/function signatures use the manifest list name and
images associated with the operation explicitly, in general
func f(ctx context.Context, manifestListName string,
ImageNames []string, options *fOptions)
* Leverage gorilla/mux Subrouters to support API v3.x and v4.x for
manifests
* Make manifest API endpoints more RESTful
* Add PUT /manifest/{id} to update existing manifests
* Add manifests.Annotate to go bindings, uncommented unit test
* Add DELETE /manifest/{Id} to remove existing manifest list, use
PUT /manifest/{id} to remove images from a list
* Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use
PUT /manifest/{id} instead
* Corrected swagger godoc and updated to cover API changes
* Update podman manifest commands to use registry.Context()
* Expose utils.GetVar() to obtain query parameters by name
* Unexpose server.registerSwaggerHandlers, not sure why this was ever
exposed.
* Refactored code to use http.Header instead of map[string]string when
operating on HTTP headers.
* Add API-Version header support in bindings to allow calling explicate
versions of the API. Header is _NOT_ forwarded to the API service.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman build always finds the abs path but was never using it for the containerfile path. This
was causing the remote client to be given a relative path that does not exist. Switch to evaluating and using absolute paths only.
resolves#12841
Signed-off-by: cdoern <cdoern@redhat.com>
Support removing the entire pod when --depend is used on an infra
container. --all now implies --depend to properly support removing all
containers and not error out when hitting infra containers.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
added support for pod wide sysctls. The sysctls supported are the same as the continer run controls.
These controls are only valid if the proper namespaces are shared within the pod, otherwise only the infra ctr gets the sysctl
resolves#12747
Signed-off-by: cdoern <cdoern@redhat.com>
Relay --quiet to save & load commands, in both Rootless
and Rootful transfer functions.
Also, a little cleanup:
- remove unuseful SOURCE/DEST printfs
- refactor duplication in execMachine()
- fix Debug("Executing") statements to include the actual
command they're executing
[NO NEW TESTS NEEDED] : Tests are being slowly implemented in #12797
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Signed-off-by: Ed Santiago <santiago@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are seeing some issues with users not understanding which VM they are
starting, and if the VM takes a long time to start, they do not know
where to look.
Moving the name to before the VM starts at least allows them to realize
they are starting the wrong VM.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
this commit fixes two bugs and adds regression tests.
when getting healthcheck values from an image, if the image does not
have a timeout defined, this resulted in a 0 value for timeout. The
default as described in the man pages is 30s.
when inspecting a container with a healthcheck command, a customer
observed that the &, <, and > characters were being converted into a
unicode escape value. It turns out json marshalling will by default
coerce string values to ut8.
Fixes: bz2028408
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add the --ipv6 flag to podman create/run and pod create. We support the
--network name:ip6=<ip> syntax now but for docker compat we should also
support the --ip6 flag.
Note that there is no validation if the ip is actually a v6 or v4 address
because the backend does not care either.
Fixes#7511
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the same type of mounts for all the machine volumes.
The default could change in the future, depending on OS.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Allow using the built-in 9pfs feature of qemu,
mounting host directories into vm mountpoints.
The volumes are generic, the mounts are specific.
Wait for the machine to be "running", otherwise
the SSH function might throw an error instead.
Increase the default msize from 8 KiB to 128 KiB
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves#12173
Signed-off-by: cdoern <cdoern@redhat.com>
Podman image scp should never enter the Podman UserNS unless it needs to. This allows for
a sudo exec.Command to transfer images to and from rootful storage. If this command is run using sudo,
the simple sudo podman save/load does not work, machinectl/su is necessary here.
This modification allows for both rootful and rootless transfers, and an overall change of scp to be
more of a wrapper function for different load and save calls as well as the ssh component
Signed-off-by: cdoern <cdoern@redhat.com>
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
CRIU's pre-copy migration support relies on the soft dirty page tracking
in the Linux kernel:
https://www.kernel.org/doc/Documentation/vm/soft-dirty.txt
This functionality is not implemented for all architectures and it can
also be turned off in the kernel.
CRIU can check if the combination of architecture/kernel/CRIU supports
the soft dirty page tracking and exports this feature checking
functionality in go-criu.
This commit adds an early check if the user selects pre-copy
checkpointing to error out if the system does not support it.
Signed-off-by: Adrian Reber <areber@redhat.com>
Fixes#11089 - cleanup PATH on MSI uninstall
Additionally fixes scenarios where the path can be overwritten by setx
Also removes the console flash, since the helper is built as a silent gui
Helper executable can be rerun by user to repair PATHs broken by other tools
Utilizes executable location instead of passed parameters to remove delicate escaping requirements
[NO NEW TESTS NEEDED]
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
It has been deprecated and is no longer supported. Fully remove it and
only print a warning if a user uses it.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves#11805
Signed-off-by: cdoern <cdoern@redhat.com>
Podman does not relay exit code from buildah instead returns a generic
error code `125`. Following PR allows `podman` to relay exit code from
`imagebuildah` to `registry` as it is.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Added an option to podman machine init to declare the timezone of the
resulting machine. the default is to use the value of the host name or
else a given timezone name like America/Chicago.
Fixes: #11895
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Make sure that `kill -a` is printing the IDs of killed containers.
Previously, it was only printing empty lines.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We have to get the network ID from the network backend. With the
netavark backend we no longer use the sha from the name as ID.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the new networks format to specgen. For api users cni_networks is
still supported to make migration easier however the static ip and mac
fields are removed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Network connect now supports setting a static ipv4, ipv6 and mac address
for the container network. The options are added to the cli and api.
Fixes#9883
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The new network backend stores the networks in a map so the returned
order is not deterministic. Lets sort the network names alphabetically
to ensure a deterministic order.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2030599
When you create pod, it shares the UTS namespace with Containers.
Currently the --hostname is not passed to the pod created when
you create a container and pod in the same command.
Also fix error message on supported --share flags
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
[NO NEW TESTS NEEDED]
Support better compatibility output for podman pods commands
See #10974
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
[NO NEW TESTS NEEDED]
Support better compatibility output for podman system commands
* Format and content of output from podman version changed to
be more compatible
See #10974
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Leverage new report.Formatter allowing better compatibility from
podman command output.
Follow on PR's will cover containers, etc.
See #10974
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Leverage new report.Formatter allowing better compatibility from
podman command output.
See #10974
See #12455
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add a new flag to set the start timeout for a generated systemd unit.
To make naming consistent, add a new --stop-timeout flag as well and let
the previous --time map to it.
Fixes: #11618
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
OpenShift Merge Robot
Aditya R
Paul Holzinger
cdoern
Romain Geissler
Jason T. Greene
Morten Linderud
Brent Baude
Daniel J Walsh
tomsweeneyredhat
Jhon Honce
esendjer
Valentin Rothberg
Matthew Heon
Jakub Guzik
Ed Santiago
Anders F Björklund
Jason T. Greene
Adrian Reber
Ondra Machacek
Giuseppe Scrivano
Matej Vasek