Accept a --amend flag in `podman manifest create`, and treat
`--insecure` as we would `--tls-verify=false` in `podman manifest`'s
"add", "create", and "push" subcommands.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
"podman kube generate" creates Kubernetes YAML from Podman containers,
pods or volumes. Users will still be able to use "podman generate
kube" as an alias of "kube generate".
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
`podman-remote manifest push` has shown absolutely no progress at all.
Fix that by doing the same as the remote-push code does.
Like remote-push, `quiet` parameter is true by default for backwards
compatibility.
Signed-off-by: Naoto Kobayashi <naoto.kobayashi4c@gmail.com>
implement new ssh interface into podman
this completely redesigns the entire functionality of podman image scp,
podman system connection add, and podman --remote. All references to golang.org/x/crypto/ssh
have been moved to common as have native ssh/scp execs and the new usage of the sftp package.
this PR adds a global flag, --ssh to podman which has two valid inputs `golang` and `native` where golang is the default.
Users should not notice any difference in their everyday workflows if they continue using the golang option. UNLESS they have been using an improperly verified ssh key, this will now fail. This is because podman was incorrectly using the
ssh callback method to IGNORE the ssh known hosts file which is very insecure and golang tells you not yo use this in production.
The native paths allows for immense flexibility, with a new containers.conf field `SSH_CONFIG` that specifies a specific ssh config file to be used in all operations. Else the users ~/.ssh/config file will be used.
podman --remote currently only uses the golang path, given its deep interconnection with dialing multiple clients and urls.
My goal after this PR is to go back and abstract the idea of podman --remote from golang's dialed clients, as it should not be so intrinsically connected. Overall, this is a v1 of a long process of offering native ssh, and one that covers some good ground with podman system connection add and podman image scp.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
When podman kube play was added the endpoint for the kube play/play kube
commands was switched from the "play kube" endpoint to the new "kube play"
endpoint. This caused issues with the remote client, requiring the need
to use the "play kube" endpoint again in order to avoid these issues.
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Also Fix usage of flag "--compression-format" for remote "podman image push". Fix usage of flags "--format", "--remove-signatures" in remote "podman manifest push".
Closes#15109.
Signed-off-by: Romain Geissler <romain.geissler@amadeus.com>
Option defaults in API must be the same as in CLI.
```
% podman image push --help
% podman image pull --help
% podman manifest push --help
% podman image search --help
```
All of these CLI commands them have --tls-verify=true by default:
```
--tls-verify require HTTPS and verify certificates when accessing the registry (default true)
```
As for `podman image build`, it doesn't have any means to control
`tlsVerify` parameter but it must be true by default.
Signed-off-by: Vladimir Kochnev <hashtable@yandex.ru>
`podman-remote push` has shown absolutely no progress at all. Fix that
by doing essentially the same as the remote-pull code does.
The get-free-out-of-jail-card for backwards compatibility is to let the
`quiet` parameter default to true. Since the --quioet flag wasn't
working before either, older Podman clients do not set it.
Also add regression tests to make sure we won't regress again.
Fixes: #11554Fixes: #14971
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fix some network option parsing logic to use constants.
Always use the isolate option since this is what docker does.
Remove the icc option, this is different from isolate and it is not
implemented.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Docker uses "bridge" as default network name so some tools expect this
to work with network list or inspect. To fix this we change "bridge" to
the podman default ("podman") name.
Fixes#14983
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Progress bar in JSONMessage is missing compared to docker output both in
pull and push. Additionaly, pull was not using JSONMessage while push
was using the type.
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
Filter flag is added for podman stop and podman --remote stop. Filtering logic is implemented in
getContainersAndInputByContext(). Start filtering can be manipulated to use this logic as well to limit redundancy.
Signed-off-by: Karthik Elango <kelango@redhat.com>
The "podman kube play" command is designed to be a replacement for the
"podman play kube" command.
It performs the same function as "play kube" while also still working with the same flags and options.
The "podman play kube" command is still functional as an alias of "kube play".
Closes#12475
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Podman wait should not be defaulting to just stopped. By default
wait API waits for stopped and exited. We should not override this on
the client side.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Since conmon-rs also uses this code we moved it to c/common. Now podman
should has this also to prevent duplication.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit fixes libpod/pods/stats endpoint which should stream the data.
Additional option param is added to disable streaming and the delay value
to choose the desired delay between streamed messages (default 5s).
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
- containerInspect compat API expects field value PrefixLen
instead of PrefixLength for type Address for SecondaryIPAddresses
- Add tests for network part of containerInspect compat api
Closes: containers#14674
Signed-off-by: 🤓 Mostafa Emami <mustafaemami@gmail.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Previously, the following network block did not update using
docker-compose:
```
networks:
default:
driver: bridge
driver_opts:
mtu: 9000
```
In the API, the network options were previously not being handled when the
network was being created. I translated the docker options into podman
options, and added the options to the network.
When doing `podman network inspect <network>`, the results now contain
`"mtu": "9000"`
Fixes: #14482
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
ImagesBatchRemoval and ImageRemoval now honors and accepts
`LookupManifest` parameter which further tells libimage to resolve to
manifest list if it exists instead of actual image.
Following PR also makes `podman-remote manifest rm` functional which was
broken till now.
Closes: https://github.com/containers/podman/issues/14763
Signed-off-by: Aditya R <arajan@redhat.com>
Some background for this PR is in discussion #14641. In short, ever so often a container inspect will return a `status.status` of `initialized` from the Docker compat socket.
From the discussion I found these lines which tries to fix a "configured" status to "created".
c936d1e611/pkg/api/handlers/compat/containers.go (L291-L294)
However, commit 141de86862 (Revamp Libpod state strings for Docker compat) removed the "configured" return value from the `String()` method called on line 291 above. Thus, making the `if` check redundant as it will never hit. But the same commit also introduces a return for "initialized" which this `if` should probably have been adapted for.
Signed-off-by: Pieter Engelbrecht <pieter@shuttle.rs>
add support for podman-remote image scp as well as direct access via the API. This entailed
a full rework of the layering of image scp functions as well as the usual API plugging and type creation
also, implemented podman image scp tagging. which makes the syntax much more readable and allows users t tag the new image
they are loading to the local/remote machine:
allow users to pass a "new name" for the image they are transferring
`podman tag` as implemented creates a new image im `image list` when tagging, so this does the same
meaning that when transferring images with tags, podman on the remote machine/user will load two images
ex: `podman image scp computer1::alpine computer2::foobar` creates alpine:latest and localhost/foobar on the remote host
implementing tags means removal of the flexible syntax. In the currently released podman image scp, the user can either specify
`podman image scp source::img dest::` or `podman image scp dest:: source::img`. However, with tags this task becomes really hard to check
which is the image (src) and which is the new tag (dst). Removal of that streamlines the arg parsing process
Signed-off-by: Charlie Doern <cdoern@redhat.com>
currently, setting any sort of resource limit in a pod does nothing. With the newly refactored creation process in c/common, podman ca now set resources at a pod level
meaning that resource related flags can now be exposed to podman pod create.
cgroupfs and systemd are both supported with varying completion. cgroupfs is a much simpler process and one that is virtually complete for all resource types, the flags now just need to be added. systemd on the other hand
has to be handeled via the dbus api meaning that the limits need to be passed as recognized properties to systemd. The properties added so far are the ones that podman pod create supports as well as `cpuset-mems` as this will
be the next flag I work on.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
This commit addresses three intertwined bugs to fix an issue when using
Gitlab runner on Podman. The three bug fixes are not split into
separate commits as tests won't pass otherwise; avoidable noise when
bisecting future issues.
1) Podman conflated states: even when asking to wait for the `exited`
state, Podman returned as soon as a container transitioned to
`stopped`. The issues surfaced in Gitlab tests to fail [1] as
`conmon`'s buffers have not (yet) been emptied when attaching to a
container right after a wait. The race window was extremely narrow,
and I only managed to reproduce with the Gitlab runner [1] unit
tests.
2) The clearer separation between `exited` and `stopped` revealed a race
condition predating the changes. If a container is configured for
autoremoval (e.g., via `run --rm`), the "run" process competes with
the "cleanup" process running in the background. The window of the
race condition was sufficiently large that the "cleanup" process has
already removed the container and storage before the "run" process
could read the exit code and hence waited indefinitely.
Address the exit-code race condition by recording exit codes in the
main libpod database. Exit codes can now be read from a database.
When waiting for a container to exit, Podman first waits for the
container to transition to `exited` and will then query the database
for its exit code. Outdated exit codes are pruned during cleanup
(i.e., non-performance critical) and when refreshing the database
after a reboot. An exit code is considered outdated when it is older
than 5 minutes.
While the race condition predates this change, the waiting process
has apparently always been fast enough in catching the exit code due
to issue 1): `exited` and `stopped` were conflated. The waiting
process hence caught the exit code after the container transitioned
to `stopped` but before it `exited` and got removed.
3) With 1) and 2), Podman is now waiting for a container to properly
transition to the `exited` state. Some tests did not pass after 1)
and 2) which revealed the third bug: `conmon` was executed with its
working directory pointing to the OCI runtime bundle of the
container. The changed working directory broke resolving relative
paths in the "cleanup" process. The "cleanup" process error'ed
before actually cleaning up the container and waiting "main" process
ran indefinitely - or until hitting a timeout. Fix the issue by
executing `conmon` with the same working directory as Podman.
Note that fixing 3) *may* address a number of issues we have seen in the
past where for *some* reason cleanup processes did not fire.
[1] https://gitlab.com/gitlab-org/gitlab-runner/-/issues/27119#note_970712864
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
[MH: Minor reword of commit message]
Signed-off-by: Matthew Heon <mheon@redhat.com>
* Replace "setup", "lookup", "cleanup", "backup" with
"set up", "look up", "clean up", "back up"
when used as verbs. Replace also variations of those.
* Improve language in a few places.
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
use the memory limit specified for the container instead of reading it
from the cgroup. It is not reliable to read it from the cgroup since
the container could have been moved to a different cgroup and in
general the OCI runtime might create a sub-cgroup (like crun does).
Closes: https://github.com/containers/podman/issues/14676
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When we return no containers we just return `[]` but we still have to keep
the content type header `application/json` so external tools can correctly
parse the output.
Fixes#14647
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The nolintlint linter does not deny the use of `//nolint`
Instead it allows us to enforce a common nolint style:
- force that a linter name must be specified
- do not add a space between `//` and `nolint`
- make sure nolint is only used when there is actually a problem
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Changes since 2022-05-31:
- add --omit-history option (buildah PR 4028)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
command
Previously, if a container was not running, and the user ran the `podman
stats` command, an error would be reported: `Error: container state
improper`.
Podman now reports stats as the fields' default values for their
respective type if the container is not running:
```
$ podman stats --no-stream demo
ID NAME CPU % MEM USAGE / LIMIT MEM % NET IO BLOCK IO PIDS CPU TIME AVG CPU %
4b4bf8ce84ed demo 0.00% 0B / 0B 0.00% 0B / 0B 0B / 0B 0 0s 0.00%
```
Closes: #14498
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
I don't see a reason why we don't support --remove-signatures
from remote push, so adding support.
Fixes: https://github.com/containers/podman/issues/14558
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For some reason commit 5b79cf15a0 moved the container create options
parsing from cmd/podman/common to pkg/api/handlers. However it did not
remove the old code. Unfortunately it moved the code from an outdated
version and did not update it before this commit was merged.
Therefore a couple of regressions were introduced. I manually compared
both versions and found three missing bugfixes.
I fixed the network test again that was changed in bce97a3b5d. We
want bridge as default even as rootless. Sine the test is not run as
rootless in CI the regression was not caught.
Also the no hosts test never worked since it was missing the import
check if the hosts file exists.
I don't think we can check for the volume parsing change since this only
works on windows/wsl.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Also:
- It fixes a regression in parsing "images" parameter in
ManifestAddV3 handler.
- Refactors 12-imagesMore.at to use start_registry helper.
- Removes some unsafe "exit 1" statements which skip clean up.
Signed-off-by: Vladimir Kochnev <hashtable@yandex.ru>
Quick fix in play.go to use logDriver to set the correct
log driver rather than overwriting query.LogDriver.
[NO NEW TESTS NEEDED]
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Feature of additional build context added here https://github.com/containers/buildah/pull/3978
already exists on `podman` following PR just enables this feature of
`podman-remote` and `podman on macOS` setups.
Signed-off-by: Aditya R <arajan@redhat.com>
Fix a bug in the resolution of images in the Docker compat API.
When looking up an image by a short name, the name may match
an image that does not live on Docker Hub. The resolved name
should be used for normalization instead of the input name to
make sure that `busybox` can resolve to `registry.com/busybox`
if present in the local storage.
Fixes: #14291
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Remove duplicate or unused types and constants
* Move all documetation-only models and responses into swagger package
* Remove all unecessary names, go-swagger will determine names from
struct declarations
* Use Libpod suffix to differentiate between compat and libpod models
and responses. Taken from swagger:operation declarations.
* Models and responses that start with lowercase are for swagger use
only while uppercase are used "as is" in the code and swagger comments
* Used gofumpt on new code
```release-note
```
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The default log driver is not used when using play kube
without --log-driver. The LogDriver function needs to
be called in order to use the default log driver.
fixes#13781
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Since the decoder is shared registering the decoder inside a single
endpoint will also register it for all others. Also the problem with
that is the it will register it everytime this endpoint is called which
is wrong.
Instead we should register it once like the other custom decoder
functions.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is no reason to mark them directly as deprecated since we still
have to use them as long as we want to support 3.X calls. The
staticcheck linter is complaining about the Deprecated comment but that
doesn't make sense in this context. There is no good way to only exclude
a single check with golangci-lint.
I renamed the function with a V3 suffix to make clear that we only use
this for backwards compat.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is an enhancement proposal for the checkpoint / restore feature of
Podman that enables container migration across multiple systems with
standard image distribution infrastructure.
A new option `--create-image <image>` has been added to the
`podman container checkpoint` command. This option tells Podman to
create a container image. This is a standard image with a single layer,
tar archive, that that contains all checkpoint files. This is similar to
the current approach with checkpoint `--export`/`--import`.
This image can be pushed to a container registry and pulled on a
different system. It can also be exported locally with `podman image
save` and inspected with `podman inspect`. Inspecting the image would
display additional information about the host and the versions of
Podman, criu, crun/runc, kernel, etc.
`podman container restore` has also been extended to support image
name or ID as input.
Suggested-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
in specgen, CLI path uses the given memory limit to define the swap value (if not already specified)
add a route to this piece of code from within the api handlers
resolves#13145
Signed-off-by: cdoern <cdoern@redhat.com>
This reverts commit e133a06d2f.
@nalind found a proper fix in c/storage [1] to address the performance
issue. So we really don't need the flag anymore. Note the flag has
never made it into any release.
[1] d76b3606fc
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
There's a potential race condition where we attempt to attach to
a container immediately after it's been stopped, but before the
cleanup process has run on it. The existing code doesn't allow an
attach to containers in the Stopped state (cleanup process has
not run) but does allow an attach to containers in the Exited
state (cleanup process has run). This doesn't make very much
sense and there's no technical reason to restrict attach to only
Exited containers, so allow attaching to Stopped containers.
[NO NEW TESTS NEEDED] Testing this is very racy - we need to get
in before the cleanup process runs, which isn't really
deterministic when we're invoked from a script - like the CI
tests.
Signed-off-by: Matthew Heon <mheon@redhat.com>
The API endpoints should properly honour the `no_hosts=true` setting in
containers.conf.
Fixes#13719
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a --size option to podman images to allow for disabling computing
the size of listed images. If listing images is critical to
performance, user may chose to turn off size computation to speed things
up.
Context: #13755
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The PlayKube and PlayKubeDown commands accepted a "path" argument to a YAML file
to play. This requires the caller to write the YAML to a file path. The downside
of this is apparent in the HTTP handlers which have to use a temporary file on
disk to store the YAML file.
The file is opened & used as the body of the HTTP request. It's possible to
instead pass a io.Reader and use a fully in-memory request body.
Add backwards-compatible changes to bindings to allow passing either a filepath
or a io.Reader body.
Refactor the podman bindings to use a io.Reader instead of a filepath.
Simplify the HTTP handlers for PlayKube by removing the now unneeded tempfile.
[NO NEW TESTS NEEDED]
Signed-off-by: Christian Stewart <christian@paral.in>
[NO NEW TESTS NEEDED]
* Branch forced 4.0 only endpoints, which broke bindings
* Fix lint error, in new code
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Allows users to set `--os` , `--arch` and `--variant` of the image
created from the custom import.
Following is useful when user is already aware of the values which are
correct for their generated rootfs
Signed-off-by: Aditya R <arajan@redhat.com>
When you run podman stats, the first interval always shows the wrong cpu
usage. To calculate cpu percentage we get the cpu time from the cgroup
and compare this against the system time between two stats. Since the
first time we do not have a previous stats an empty struct is used
instead. Thus we do not use the actual running time of the container but
the current unix timestamp (time since Jan 1 1970).
To fix this we make sure that the previous stats time is set to the
container start time, when it is empty.
[NO NEW TESTS NEEDED] No idea how I could create a test which would have
a predictable cpu usage.
See the linked bugzilla for a reproducer.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2066145
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add an `--ignore` flag to `podman image rm` to instruct ignoring image
if a specified image does not exist and to not throw an error. Other
commands (e.g., `podman container rm`) already support this flag.
Such an `--ignore` flag can come in handy in clean-up scripcts such as
the teardown phases in the Podman tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When podman generate systemd is invoked, it previously did not check if
container-prefix or pod-prefix are empty. When these are empty, the file name
starts with the separator, which is hyphen by default. This results in files
like '-containername.service'.
The code now checks if these prefixes are empty. If they are, the filename no
longer adds a separator. Instead, it uses name or ID of the container or pod.
Closes#13272
Signed-off-by: Nirmal Patel <npate012@gmail.com>
Allow users to add annotions in the podman play kube command.
This PR Also fixes the fact that annotations in the pod spec were
not being passed down to containers.
Fixes: https://github.com/containers/podman/issues/12968
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow users to commit containers into a single layer.
Usage
```bash
podman container commit --squash <name>
```
Signed-off-by: Aditya R <arajan@redhat.com>
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
* Ensure meaningful behaviour when called with /v3.x.x semantics
* Change return code to 409 from 500 when client attempts to use an
existing network name
* Update API bats test runner to support /v4.0.0 endpoints by default
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Lot of clients are expecting proper `Content-type: application/json`
configured in response headers of `/build` compat api. Following commit
fixes that.
Fixes issues where code is setting header field after writing header
which is wrong. We must set `content-type` before we write and flush
http header.
Signed-off-by: Aditya R <arajan@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
When we run rootless buildah needs to have IsolationOCIRootless set
otherwise it will run code which cannot be used as rootless user.
Podman should use the buildah default if possible and change it to
rootless mode if needed.
[NO NEW TESTS NEEDED] Should be covered by existing tests once we have
podman-remote rootless tests.
Fixes#12989
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixes: https://github.com/containers/podman/issues/12963
[NO NEW TESTS NEEDED] I don't know how to create two
containers with the same first digit of the digest,
which I could them attempt to remove.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This commit removes error message string from utils.Error in pkg/api.
Param was not used inside a function for quite a long time
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
`http:/host:port/images/load` fails to accept tar with more than one
images however manual load works as expected. Remove explicit check for
`1` image and only fail if result set has value less than `1`.
Signed-off-by: Aditya R <arajan@redhat.com>
This commit includes:
* Handlers for generate systemd unit
with manually defined dependencies such as:
Wants=, After= and Requires=
* The new unit and e2e tests for checking generated systemd units
for container and pod with custom dependencies
* Documented descriptions for custom dependencies options
Signed-off-by: Eugene (Evgenii) Shubin <esendjer@gmail.com>
* Update method/function signatures use the manifest list name and
images associated with the operation explicitly, in general
func f(ctx context.Context, manifestListName string,
ImageNames []string, options *fOptions)
* Leverage gorilla/mux Subrouters to support API v3.x and v4.x for
manifests
* Make manifest API endpoints more RESTful
* Add PUT /manifest/{id} to update existing manifests
* Add manifests.Annotate to go bindings, uncommented unit test
* Add DELETE /manifest/{Id} to remove existing manifest list, use
PUT /manifest/{id} to remove images from a list
* Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use
PUT /manifest/{id} instead
* Corrected swagger godoc and updated to cover API changes
* Update podman manifest commands to use registry.Context()
* Expose utils.GetVar() to obtain query parameters by name
* Unexpose server.registerSwaggerHandlers, not sure why this was ever
exposed.
* Refactored code to use http.Header instead of map[string]string when
operating on HTTP headers.
* Add API-Version header support in bindings to allow calling explicate
versions of the API. Header is _NOT_ forwarded to the API service.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
[NO NEW TESTS NEEDED] This is just code cleanup.
The remote API has three different GetImages functions, which I believe
can be handled by just one function.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are hard coding mounts to return nil in compat API,
since we have the data, we should return it.
Fixes: https://github.com/containers/podman/issues/12734
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For Status = "die", Docker sets the exit code of the container
to a field "exitCode". Podman uses "containerExitCode".
Copy the value into "exitCode" as well, for compatibility.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves#12173
Signed-off-by: cdoern <cdoern@redhat.com>
It has been deprecated and is no longer supported. Fully remove it and
only print a warning if a user uses it.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves#11805
Signed-off-by: cdoern <cdoern@redhat.com>
When normalizing image names on the compat API, make sure to take the
`sha256:` prefix into account when matching against the image ID.
Otherwise, the name will mistakingly be subject to docker.io
normalization.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Since #10168, on the event "died", the Status is set to "die"
for compatibility with the Docker API. Docker also sets
the field Action to "died", so do the same here.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
The swagger api docs used the extra Body struct as part of the request
which is wrong. We just want the plain type.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Network connect now supports setting a static ipv4, ipv6 and mac address
for the container network. The options are added to the cli and api.
Fixes#9883
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Almost every caller is using it only to wrap an error
in exactly the same way, so move that error context into GetCredentials
and simplify the users.
(The one other caller, build, was even wrapping the error incorrectly
talking about query parameters; so let it use the same text as the others.)
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
We don't yet have a local registry running in the APIv2 tests.
Tested manually.
[NO NEW TESTS NEEDED]
Fixes: https://github.com/containers/podman/issues/12468
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The Docker-compatible REST API has historically behaved just as the rest
of Podman and Buildah (and the atomic Docker in older RHEL/Fedora) where
`containers-registries.conf` is centrally controlling which registries
a short name may resolve to during pull or local image lookups. Please
refer to a blog for more details [1].
Docker, however, is only resolving short names to docker.io which has
been reported (see #12320) to break certain clients who rely on this
behavior. In order to support this scenario, `containers.conf(5)`
received a new option to control whether Podman's compat API resolves
to docker.io only or behaves as before.
Most endpoints allow for directly normalizing parameters that represent
an image. If set in containers.conf, Podman will then normalize the
references directly to docker.io. The build endpoint is an outlier
since images are also referenced in Dockerfiles. The Buildah API,
however, supports specifying a custom `types.SystemContext` in which
we can set a field that enforces short-name resolution to docker.io
in `c/image/pkg/shortnames`.
Notice that this a "hybrid" approach of doing the normalization directly
in the compat endpoints *and* in `pkg/shortnames` by passing a system
context. Doing such a hybrid approach is neccessary since the compat
and the libpod endpoints share the same `libimage.Runtime` which makes
a global enforcement via the `libimage.Runtime.systemContext`
impossible. Having two separate runtimes for the compat and the libpod
endpoints seems risky and not generally applicable to all endpoints.
[1] https://www.redhat.com/sysadmin/container-image-short-namesFixes: #12320
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Prevents temp secrets leaking into image by moving it away from context
directory to parent builder directory. Builder directory automatically
gets cleaned up when we are done with the build.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Podman remote must treat build secrets as part of context directory. If
secret path is absolute path on host copy it to tar file and pass it to
remote server.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Following commit makes sure that `build` api can accept external
secret and allows currently `NOOP` `podman-remote build -t tag
--secret id=mysecret,src=/path/on/remote` to become functional.
Just like `docker` following api is a hidden field and only exposed to
`podman-remote` but could document it if it needs exposed on `swagger`.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
In order to maintain compatiblity with `moby API` we must the field
`errorDetail` which is primary error reporting field with stream.
Currently podman is using `error` which is already deprecated by moby.
Check: https://github.com/moby/moby/blob/master/pkg/jsonmessage/jsonmessage.go#L147
[NO NEW TESTS NEEDED]
We can't test this in podman CI since we dont have a docker client.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Add a new flag to set the start timeout for a generated systemd unit.
To make naming consistent, add a new --stop-timeout flag as well and let
the previous --time map to it.
Fixes: #11618
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Non-podman clients do not set `layers` while making request. This is
supposed to be `true` bydefault but `non-podman-clients i.e Docker` dont
know about this field as a result they end up setting this values to
`false`. Causing builds to never use cache for layers.
Adds compatiblity for `docker SDK`.
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya Rajan <arajan@redhat.com>
There is a problem with creating and storing the exit command when the
container was created. It only contains the options the container was
created with but NOT the options the container is started with. One
example would be a CNI network config. If I start a container once, then
change the cni config dir with `--cni-config-dir` ans start it a second
time it will start successfully. However the exit command still contains
the wrong `--cni-config-dir` because it was not updated.
To fix this we do not want to store the exit command at all. Instead we
create it every time the conmon process for the container is startet.
This guarantees us that the container cleanup process is startet with
the correct settings.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Support `checkpoint --pre-checkpoint`
* Support `checkpoint --with-previous`
* Disable `restore --import-previous` for the remote client since we had
to send two files which in turn would require to tar them up and hence
be a breaking change. Podman 4.0 would be the chance and I hope we'll
find time before that to remote-restore prettier.
Note that I did not run over swagger yet to check whether all parameters
are actually documented due to time constraints.
Fixes: #12334
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Nothing was working before, and it's too much to summarize. To make
sure we're not regressing in the future again, enable the remote e2e
tests.
Fixes: #12007
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This adds the parameter '--print-stats' to 'podman container restore'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to restore a checkpoint and print out these
information. CRIU already creates process restore statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the restored container, Podman will now print
out JSON:
# podman container restore --latest --print-stats
{
"podman_restore_duration": 305871,
"container_statistics": [
{
"Id": "47b02e1d474b5d5fe917825e91ac653efa757c91e5a81a368d771a78f6b5ed20",
"runtime_restore_duration": 140614,
"criu_statistics": {
"forking_time": 5,
"restore_time": 67672,
"pages_restored": 14
}
}
]
}
The output contains 'podman_restore_duration' which contains the
number of microseconds Podman required to restore the checkpoint. The
output also includes 'runtime_restore_duration' which is the time
the runtime needed to restore that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
This adds the parameter '--print-stats' to 'podman container checkpoint'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to create a checkpoint and print out these
information. CRIU already creates checkpointing statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the checkpointed container, Podman will now print
out JSON:
# podman container checkpoint --latest --print-stats
{
"podman_checkpoint_duration": 360749,
"container_statistics": [
{
"Id": "25244244bf2efbef30fb6857ddea8cb2e5489f07eb6659e20dda117f0c466808",
"runtime_checkpoint_duration": 177222,
"criu_statistics": {
"freezing_time": 100657,
"frozen_time": 60700,
"memdump_time": 8162,
"memwrite_time": 4224,
"pages_scanned": 20561,
"pages_written": 2129
}
}
]
}
The output contains 'podman_checkpoint_duration' which contains the
number of microseconds Podman required to create the checkpoint. The
output also includes 'runtime_checkpoint_duration' which is the time
the runtime needed to checkpoint that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
'--memory-swappiness=0' used to work. This patch fixes the regression
issue, which was caused by the change of infra container creation
process.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Docker/Moby always create the working directory, and some tools
rely on that behavior (example, woodpecker/drone).
Fixes#11842
Signed-off-by: Michael Scherer <misc@redhat.com>
* Implement API query parameter stream and delay for containers and
pods top endpoints
* Update swagger with breaking changes
* Add python API tests for endpoints
Fixes#12115
Signed-off-by: Jhon Honce <jhonce@redhat.com>
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We should only use the Containerfiles/Dockerfiles found in the context
directory.
Fixes: https://github.com/containers/podman/issues/12054
[NO NEW TESTS NEEDED] It is difficult to setup a test for this in the
CI/CD system, but build tests should find if this PR broke anything.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Following commit makes sure when buildah tag is invoked on a manifest
list, it tags the same manifest list instead of resolving to an image and
tagging it.
Port of: https://github.com/containers/buildah/pull/3483
Signed-off-by: Aditya Rajan <arajan@redhat.com>
* JSON and API description fields are no longer truncated. Formatting
moved to client, better support of MVP.
* --no-trunc now defaults to true
* Updated tests for changes
Closes#11894
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Vendor the latest HEAD in c/common to pull in changes for a faster
inspection of images. Previously, only the size computation was
optional, now the one for the parent image is as well.
In many cases, the parent image is not needed but it takes around 10ms
on my local machine. With this change, we cut off 10ms from many code
paths, most importantly, container creation.
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This option will setup the containers to not modify their /etc/hosts
file and just use the one from the image.
Fixes: https://github.com/containers/podman/issues/9500
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman inspect shows the healthcheck status in `.State.Healthcheck`,
docker uses `.State.Health`. To make sure docker scripts work we
should add the `Health` key. Because we do not want to display both keys
by default we only use the new `Health` key. This is a breaking change
for podman users but matches what docker does. To provide some form of
compatibility users can still use `--format {{.State.Healthcheck}}`. IT
is just not shown by default.
Fixes#11645
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Enforce the removal of signatures in `podman save` to restore behavior
prior to the migration to libimage. We may consider improving on that
in the future. For details, please refer to the excellent summary by
@mtrmac [1].
[NO TESTS NEEDED] - manually verified but exisiting tests need some
further investigation (see [1]).
[1] https://github.com/containers/podman/pull/11669#issuecomment-925250264
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add an option to `podman save` to allow uncompressed layers when
copying OCI images. Do the neccessary plumbing for the remote client,
add tests and vendor in the latest commit from c/common to fetch
the neccessary changes in libimage.
Closes: #11613
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
added support for pod devices. The device gets added to the infra container and
recreated in all containers that join the pod.
This required a new container config item to keep track of the original device passed in by the user before
the path was parsed into the container device.
Signed-off-by: cdoern <cdoern@redhat.com>
Docker adds the `sha256:` prefix to the image ID, so our compat endpoint
has to do this as well.
Fixes#11623
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman network create` should not allow users to create networks with a
name which is already used for a network mode in `podman run --network`.
Fixes#11448
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When `?all=garbage` is passed to an API endpoint schema validation fails
and err is nil. Wrapf uses err to create an error message causing a nil
pointer dereference.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
The builder can take a list of platforms in the Platforms field of its
BuildOptions argument, and we should definitely take advantage of that.
The `bud-multiple-platform-values` test from buildah exercises support
for this, so
[NO TESTS NEEDED]
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
added support for the --volume flag in pods using the new infra container design.
users can specify all volume options they can with regular containers
resolves#10379
Signed-off-by: cdoern <cdoern@redhat.com>
* To aid in debugging log API request and response bodies at trace
level. Events can be correlated using the X-Reference-Id.
* Server now echos X-Reference-Id from client if set, otherwise
generates an unique id.
* Move logic for X-Reference-Id into middleware
* Change uses of Header.Add() to Set() when setting Content-Type
* Log API operations in Apache format using gorilla middleware
* Port server code to use BaseContext and ConnContext
Fixes#10053
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Include the response schema for a succesful request in the
/containers/stats API documentation
Additionally remove http 409 from /libpod/containers/stats docs, the
documentation was copied from the deprecated stats endpoint, when a
container is unavailabe the endpoint returns an empty list and no 409.
Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com>
override the outer scope variable instead of creating a local one.
Otherwise the wrong variable would be used for the next iterations.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Handle custom restart policies of containers when generating the unit
files; those should be set on the unit level and removed from ExecStart
flags.
Fixes: #11438
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Filtering is missing in both compat API and libpod API, while docker
has filtering functinality. This commit enables filtering option using
name and id in both libpod and http API.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
add the ability for play kube to tear down based on the yaml used to
play it. it is indicated by --down in the play kube command. volumes
are NOT deleted during the teardown. pods and their containers are
stopped and removed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
In libpod/logs.LogLine.Write(), don't write a newline to stdout/stderr
when the log message is only part of a line.
In libpod.ConmonOCIRuntime.HTTPAttach(), don't send a newline over the
HTTP connection when the log message is only part of a line.
In pkg/api/handlers/compat.LogsFromContainer(), don't send a newline
over the HTTP connection when the log message is only part of a line,
and don't make doing so conditional on whether or not the client used
the docker or podman endpoint.
In pkg/domain/infra/tunnel.ContainerEngine.ContainerLogs(), don't add
our own newline to log messages, since they already come through from
the server when they need to.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
we were adding a negative duration in podman events, causing inputs like
-5s to be correct and 5s to be incorrect.
fixes#11158
Signed-off-by: cdoern <cdoern@redhat.com>
For docker compat include information about available volume, log and
network drivers which should be listed under the plugins key.
Fixes#11265
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Endpoint /build logs an info entry when a client uses the wrong
Content-Type for build payload. Given Content-Type is ignored and
assumed to be "application/x-tar".
Endpoint /libpod/build will fail unless "application/x-tar" or
"application/tar" is given for Content-Type. "application/tar" will
be logged as an info entry.
Fixes#11012
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
OpenShift Merge Robot
Josh Patterson
Nalin Dahyabhai
Niall Crowe
Naoto Kobayashi
Charlie Doern
Aditya R
Karthik Elango
Romain Geissler
Vladimir Kochnev
Paul Holzinger
Valentin Rothberg
Jakub Guzik
Sascha Grunert
openshift-ci[bot]
Daniel J Walsh
🤓 Mostafa Emami
Jake Correnti
chesedo
Erik Sjölund
Giuseppe Scrivano
Jhon Honce
Radostin Stoyanov
cdoern
Matthew Heon
jason
Christian Stewart
Nirmal Patel
Rover van der Noort
esendjer
Matej Vasek
Valentin Rothberg
Leah Neukirchen
Oliver
Ananth Bhaskararaman
Miloslav Trmač
Ondra Machacek
Ambrose Chua
Michael Scherer
Adrian Reber
Hironori Shiina
Boaz Shuster
Jelle van der Waa
Jakub Guzik
Brent Baude