if the target mount path already exists and the container uses a user
namespace, correctly map the target UID/GID to the host values before
attempting a chown.
Closes: https://github.com/containers/podman/issues/21608
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
And, runc-1.12 broke our seccomp e2e tests (runc now calls getcwd(),
which is the dummy syscall blocked for testing seccomp). Switch
to blocking link() instead.
Also, disable v4.1.0 upgrade tests. They're hanging, and I have
no idea why, and have wasted most of a day debugging.
Fixes: #21546
Signed-off-by: Ed Santiago <santiago@redhat.com>
Conmon writes the exit file and oom file (if container
was oom killed) to the persist directory. This directory
is retained across reboots as well.
Update podman to create a persist-dir/ctr-id for the exit
and oom files for each container to be written to. The oom
state of container is set after reading the files
from the persist-dir/ctr-id directory.
The exit code still continues to read the exit file from
the exits directory.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
For some reason this starting to flake f38. I don't think the issue in
podman rather the test start nc -l in the background so it may not yet
have bound the port in the container when we try to connect.
To fix this simply add some retry logic to nc.
While at it also add pasta to this test and make it use
defer-assertion-failures to run all loop iterations before reporting the
errors.
Fixes#21561 (hopefully)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Simply because it's been a while since the last testimage
build, and I want to confirm that our image build process
still works.
Added /home/podman/healthcheck. This saves us having to
podman-build on each healthcheck test. Removed now-
unneeded _build_health_check_image helper.
testimage: bump alpine 3.16.2 to 3.19.0
systemd-image: f38 to f39
- tzdata now requires dnf **install**, not reinstall
(this is exactly the sort of thing I was looking for)
PROBLEMS DISCOVERED:
- in e2e, fedoraMinimal is now == SYSTEMD_IMAGE. This
screws up some of the image-count tests (CACHE_IMAGES).
- "alter tarball" system test now barfs with tar < 1.35.
TODO: completely replace fedoraMinimal with SYSTEMD_IMAGE
in all tests.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
No longer bother testing any 2.x or 3.x. Only 4.1 and above.
Remove all CNI-related code. CNI is gone.
Add DatabaseBackend tests, confirming that we can handle
both boltdb and sqlite.
Require BATS >= 1.8.0, and use "run -0" to do exit-status checks.
Update docs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When interface_name attribute in containers.conf file is set to "device", then set interface names inside containers same as the network_interface names of the respective network.
The change applies to macvlan and ipvlan networks only. The interface_name attribute value has no impact on any other types of networks.
If the interface name is set in the user request, then that takes precedence.
Fixes: #21313
Signed-off-by: Vikas Goel <vikas.goel@gmail.com>
This mirrors how the Docker API handles things, allowing us to be
more compatible with Docker and more verbose on the Libpod API.
Stats are given as per network interface in the container, but
still aggregated for `podman stats` and `podman pod stats`
display (so the CLI does not change, only the Libpod and Compat
APIs).
Signed-off-by: Matt Heon <mheon@redhat.com>
These should all work with the latest netavark. The ipvlan case needs a
subnet because it does not support DHCP.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently we deadlock in the slirp4netns setup code as we try to
configure an non exissting netns. The problem happens because we tear
down the netns in the userns case correctly since commit bbd6281ecc but
that introduces this slirp4netns problem. The code does a proper new
network setup later so we should only use the short cut when not in a
userns.
Fixes#21477
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman v5 will not support cgroups-v1. This commit will print a warning
if it detects a cgroups-v1 system. The warning can be hidden by setting
envvar `PODMAN_CGROUPSV1_WARNING`.
This warning is patched out for RHEL 9 builds as cgroups-v1 will still
be supported on RHEL 9 systems.
Resolves: https://issues.redhat.com/browse/RUN-1957
[NO NEW TESTS NEEDED]
Co-authored-by: Ed Santiago <santiago@redhat.com>
Co-authored-by: Sascha Grunert <sgrunert@redhat.com>
Co-authored-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Lokesh Mandvekar <lsm5@redhat.com>
Just like all the other inspect commands that accept multiple args we
should just make podman pod inspect output a json array.
This makes the code more consistent and removes the extra workaround
which was needed before to support this.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
CNI is deprecated and is build tagged out for 5.0. Don't test it in our CI.
This commit also disables upgrade tests for now - those need more work since the old version of Podman only uses CNI. Upgrade tests will be re-vamped in a later commit.
Signed-off-by: Ashley Cui <acui@redhat.com>
The pasta network mode has been added in podman v4.4 and this causes a
conflict with named networks that could also be called "pasta". To not
break anything we had special logic to prefer the named network over the
network mode. Now with 5.0 we can break this and remove this awkward
special handling from the code.
Containers created with 4.X that use a named network pasta will also
continue to work fine, this chnage will only effect the creation of new
containers with a named network pasta and instead always used the
network mode pasta. We now also block the creation of networks with the
name "pasta".
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The current field separator comma of the inspect annotation conflicts with the mount options of --volumes-from as the mount options itself can be comma separated.
Signed-off-by: Vikas Goel <vikas.goel@gmail.com>
From https://github.com/containers/automation_images/pull/325
Major change: netavark and aardvark are now included in prior-fedora,
so CNI can be fully eliminated from CI (#21410)
FIXME FIXME FIXME: skip two e2e tests, waiting for new netavark
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix the way we set skipTLSVerify on the client side
to ensure that the push stage in farm build takes into
account the configuration in the farm node's registries.conf
when the user hasn't set it on the client side.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Podman Desktop [1] is looking into improving the user experience which
requires to know the source of an image. Consider the user triggers an
image pull and Podman Desktop wants to figure out whether the image name
refers to a Red Hat registry, for instance, to prompt installing the RH
auth extension.
Since the input values of images may be a short name [2], Podman Desktop
has no means to figure out the (potential) source of the image. Hence,
add a new `/resolve` endpoint to allow external callers to figure out
the (potential) fully-qualified image name of a given value.
With the new endpoint, Podman Desktop can ask Podman directly to resolve
the image name and then make an informed decision whether to prompt the
user to perform certain tasks or not. This for sure can also be used
for any other registry (e.g., Quay, Docker Hub).
[1] https://github.com/containers/podman-desktop/issues/5771
[2] https://www.redhat.com/sysadmin/container-image-short-names
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
We now no longer write containers.conf, instead system connections and
farms are written to a new file called podman-connections.conf.
This is a major rework and I had to change a lot of things to get this
to compile again with my c/common changes.
It is a breaking change for users as connections/farms added before this
commit can now no longer be removed or modified directly. However because
the logic keeps reading from containers.conf the old connections can
still be used to connect to a remote host.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When inspecting a container that does not define any health check, the health field should return nil. This matches docker behavior.
Signed-off-by: Ashley Cui <acui@redhat.com>
SpecGen is our primary container creation abstraction, and is
used to connect our CLI to the Libpod container creation backend.
Because container creation has a million options (I exaggerate
only slightly), the struct is composed of several other structs,
many of which are quite large.
The core problem is that SpecGen is also an API type - it's used
in remote Podman. There, we have a client and a server, and we
want to respect the server's containers.conf. But how do we tell
what parts of SpecGen were set by the client explicitly, and what
parts were not? If we're not using nullable values, an explicit
empty string and a value never being set are identical - and we
can't tell if it's safe to grab a default from the server's
containers.conf.
Fortunately, we only really need to do this for booleans. An
empty string is sufficient to tell us that a string was unset
(even if the user explicitly gave us an empty string for an
option, filling in a default from the config file is acceptable).
This makes things a lot simpler. My initial attempt at this
changed everything, including strings, and it was far larger and
more painful.
Also, begin the first steps of removing all uses of
containers.conf defaults from client-side. Two are gone entirely,
the rest are marked as remove-when-possible.
[NO NEW TESTS NEEDED] This is just a refactor.
Signed-off-by: Matt Heon <mheon@redhat.com>
openshift-merge-bot[bot]
Giuseppe Scrivano
Ed Santiago
Urvashi Mohnani
Paul Holzinger
Matt Heon
Ygal Blum
Vikas Goel
Daniel J Walsh
Lokesh Mandvekar
Ashley Cui
Valentin Rothberg