Add quiet and no-info flags to podman machine start.
No-info suppresses helpful informational tips
Quiet suppresses machine start progress output, as well as informational
tips.
Signed-off-by: Ashley Cui <acui@redhat.com>
`--format json` should not be the same as `--format {{json .}}`, the
later should actually run through the go template and thus create one
json object per entry instead of an json array.
Includes a vendor of c/common@main since it requires a fix from there as
well.
This matches docker compat.
Fixes#16436
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Up - do not fail if volume already exists, use the existing one
Down - allow the user to remove the volume by passing --force
Add tests
Update the documentation
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Remove the container/pod ID file along with the container/pod. It's
primarily used in the context of systemd and are not useful nor needed
once a container/pod has ceased to exist.
Fixes: #16387
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
--insecure and --verbose flags for docker compatibility
--tls-verify for syntax compatibility and allow users to inspect
manifests at remote Container Registiries without requiring tls.
Helps fix: https://github.com/containers/podman/issues/14917
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the abilitiy to deploy the generated kube yaml to a
kubernetes cluster with the podman kube apply command.
Add support to directly apply containers, pods, or volumes
by passing in their names or ids to the command.
Use the kubernetes API endpoints and http requests to connect
to the cluster and deploy the various kubernetes object kinds.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
The rest of the code has been using golang.org/x/* for the IsTerminal()
API for a long time, not github.com/mattn/go-isatty. It seems better to
stick to packages from the golang.org domain, whenever possible, and one
less dependency is always a good thing.
The modules were not cleaned up with 'make vendor' because 'go mod tidy'
was running into:
go: error loading go 1.16 module graph:
github.com/containers/image/v5@v5.23.1-0.20221015133641-1921a1993c67
requires
github.com/honeycombio/beeline-go@v1.9.0 requires
github.com/mattn/go-sqlite3@v2.0.3+incompatible: reading
github.com/mattn/go-sqlite3/go.mod at revision v2.0.3: unknown
revision v2.0.3
If reproducibility with go 1.16 is not needed:
go mod tidy -compat=1.17
Since go.mod already requires Go 1.17, the following commands were
manually run:
$ go mod tidy -compat=1.17
$ go mod vendor
$ go mod verify
Further modifications to go.sum were done manually based on the
complaints from postbuild.sh run by the CI.
[NO NEW TESTS NEEDED] as it's not a functional change.
Fixes: 85db895012 ("logging: new mode -l passthrough")
Signed-off-by: Debarshi Ray <rishi@fedoraproject.org>
The binary name is not the same as in the old quadlet, and can anyway
differ in system and user runs, so use os.Args[0] to get the right name
in the comment.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Truncate the container and pod ID files instead of throwing an error.
The main motivation is to prevent redundant work when starting systemd
units. Throwing an error when the file already exists is not preventing
races or file corruptions, so let's leave that to the user which in
almost all cases are generated (and tested) systemd units.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This ignores the create request if the named volume already exists.
It is very useful when scripting stuff.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Use `Default()` instead of re-loading containers.conf.
Also rework how the containers.conf objects are handled for parsing the
CLI. Previously, we were conflating "loading the defaults" with
"storing values from the CLI" with "libpod may further change fields"
which ultimately led to various bugs and test failues.
To address the issue, separate the defaults from the values from the CLI
and properly name the fields to make the semantics less ambiguous.
[NO NEW TESTS NEEDED] as it's not a functional change.
Fixes: containers/common/issues/1200
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fixed the issue of `--format` and `--verbose` flags being allowed in
combination with one another.
Implemented functionality for `--format json` or `--format '{{ json }}' `.
Implemented command-completion help for `--format`.
Fixes: #16204
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Reduce the number of top-level packages in ./pkg by moving quadlet
packages under ./pkg/systemd.
[NO NEW TESTS NEEDED] - no functional change.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fix two bugs in `system df`:
1. The total size was calculated incorrectly as it was creating the sum
of all image sizes but did not consider that a) the same image may
be listed more than once (i.e., for each repo-tag pair), and that
b) images share layers.
The total size is now calculated directly in `libimage` by taking
multi-layer use into account.
2. The reclaimable size was calculated incorrectly. This number
indicates which data we can actually remove which means the total
size minus what containers use (i.e., the "unique" size of the image
in use by containers).
NOTE: The c/storage version is pinned back to the previous commit as it
is buggy. c/common already requires the buggy version, so use a
`replace` to force/pin.
Fixes: #16135
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Based on the initial port in https://github.com/containers/quadlet/pull/41
This contains the unit tests and the testcases from the C code as well
as modification to the podman spec file based on what the quadlet
spec file looks like, producing a podman-quadlet subpackage.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Motivated to have a working `make lint` on Fedora 37 (beta).
Most changes come from the new `gofmt` standards.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The new cobra update fixed a bug which caused some options to not be
included in --help when there was already a option with the same name
on a parent command.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixed issue where executing the command `podman pod logs -l` would panic
because it was indexing into an empty arguments array.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
This patch extends the podman run command with support for checkpoint
images. When `podman run` is invoked with an image that contains
a checkpoint, it would restore the container from that checkpoint.
Example:
podman run -d --name looper busybox /bin/sh -c \
'i=0; while true; do echo $i; i=$(expr $i + 1); sleep 1; done'
podman container checkpoint --create-image checkpoint-image-1 looper
podman run checkpoint-image-1
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
Podman allows to store a container checkpoints as an images.
This patch makes the check that is used to recognise such checkpoint
images reusable by moving it in utils. This functionality will be reused
in a subsequent patch to extend the `podman run` command with support
for checkpoint images.
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
add the key used in newly initialized machines to the user's known_hosts file. This ensures that golang will be able to ssh into the machine using
podman-remote. Also, remove the /dev/null redirection for podman machine ssh's known_hosts file.
resolves#15347
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Changes since 2022-09-09:
- man page: add --skip-unused-stages (buildah 4249)
- man page: bring in new Note for --cache-ttl (4248)
- system tests: de-stutter (4205)
- (internal): in skip() applier: escape asterisk, otherwise
the "bud with --dns* flags" sed expression never applies.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow overwrite of the signature-policy file
by passing signature-policy flag to podman save command
Closes: https://github.com/containers/podman/issues/15869
Signed-off-by: 😎Mostafa Emami <mustafaemami@gmail.com>
Add --label/-l label flag to secret create, and show labels when
inspecting secrets. Also allow labeling secrets via libpod/compat API.
Signed-off-by: Ashley Cui <acui@redhat.com>
Package `io/ioutil` was deprecated in golang 1.16, preventing podman from
building under Fedora 37. Fortunately, functionality identical
replacements are provided by the packages `io` and `os`. Replace all
usage of all `io/ioutil` symbols with appropriate substitutions
according to the golang docs.
Signed-off-by: Chris Evich <cevich@redhat.com>
Alias
podman --context -> podman --connection
podman context use -> podman system connection default
podman context rm -> podman system connection rm
podman context create -> podman system connection add
podman context ls ->podman system connection ls
podman context inspect ->podman system connection ls --json (For
specified connections)
Podman context is a hidden command, but can be used for existing scripts
that assume Docker under the covers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Unlikely to happen but when there is an error printing the data to
stdout (either as json or go template) we should not just log it and
exit with 0. Instead return a proper error and exit with 125.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
Also fixa bug since the table format is expected to print headers as
well.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
Also fix a bug where a invlaid template would not cause a exit code > 0,
see the added test case.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman --events-backend none events should return with an error since it
will never be able to actually list events.
Fixes part three of #15688
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman adds an Error: to every error message. So starting an error
message with "error" ends up being reported to the user as
Error: error ...
This patch removes the stutter.
Also ioutil.ReadFile errors report the Path, so wrapping the err message
with the path causes a stutter.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Just like the other inspect commands `podman pod inspect p1 p2` should
return the json for both.
To correctly implement this we follow the container inspect logic, this
allows use to reuse the global inspect command.
Note: To not break the existing single pod output format for podman pod
inspect I added a pod-legacy inspect type. This is only used to make
sure we will print the pod as single json and not an array like for the
other commands. We cannot use the pod type since podman inspect --type
pod did return an array and we should not break that as well.
Fixes#15674
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
--debug should not be a global flag, you can only use this as podman
--debug never podman ps --debug. This matches docker and allows us to
add the shorthand "D" since they now no longer conflict.
Fixes changes from commit 2d30b4dee5 which claims to add -D but never
did.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman events --format {{.ID}} was not working since the template was
converted to a range but we only render each event individually.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman update allows users to change the cgroup configuration of an existing container using the already defined resource limits flags
from podman create/run. The supported flags in crun are:
this command is also now supported in the libpod api via the /libpod/containers/<CID>/update endpoint where
the resource limits are passed inthe request body and follow the OCI resource spec format
–memory
–cpus
–cpuset-cpus
–cpuset-mems
–memory-swap
–memory-reservation
–cpu-shares
–cpu-quota
–cpu-period
–blkio-weight
–cpu-rt-period
–cpu-rt-runtime
-device-read-bps
-device-write-bps
-device-read-iops
-device-write-iops
-memory-swappiness
-blkio-weight-device
resolves#15067
Signed-off-by: Charlie Doern <cdoern@redhat.com>
if we are running in a container in the root cgroup, Podman tries to
move itself to a sub-cgroup. This could be a problem in a setup where
the cgroups are not writeable, so just log a debug message and
continue, since anyway it is a best-effort operation.
Closes: https://github.com/containers/podman/issues/15498
[NO NEW TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
NOTE: This does not edit the use-sigstore-attachments value
in registries.d, similarly to how (podman image trust set) didn't
set the lookaside paths for simple signing.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
the `podman save` command was failing on windows due to the use of a
colon between the drive letter and first directory. the check was
intended for Linux and not windows.
Fixes#15247
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Allow end users to preprocess default environment variables before
injecting them into container using `--env-merge`
Usage
```
podman run -it --rm --env-merge some=${some}-edit --env-merge
some2=${some2}-edit2 myimage sh
```
Closes: https://github.com/containers/podman/issues/15288
Signed-off-by: Aditya R <arajan@redhat.com>
`podman kube play` can create pods and containers from YAML
read from a URL poiniting to a YAML file.
For example: `podman kube play https://example.com/demo.yml`.
`podman kube down` can also teardown pods and containers created
from that YAML file by also reading YAML from a URL, provided the
YAML file the URL points to has not been changed or altered since
it was used to create pods and containers
Closes#14955
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Support inspecting image healthcheck using docker supported
`.Config.HealthCheck` by aliasing field to `.HealthCheck`
Now supports
```Console
podman image inspect -f "{{.Config.Healthcheck}}" imagename
```
Closes: https://github.com/containers/podman/issues/14661
Signed-off-by: Aditya R <arajan@redhat.com>
Refactor the RawInput process of the `rm` and
`start` subcommands, like the other subcommands
such as `restart, stop, etc`.
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Accept a --amend flag in `podman manifest create`, and treat
`--insecure` as we would `--tls-verify=false` in `podman manifest`'s
"add", "create", and "push" subcommands.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
--cidfile : Read container ID from the specified file and restart the container.
--filter : restart the filtered container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
"podman kube generate" creates Kubernetes YAML from Podman containers,
pods or volumes. Users will still be able to use "podman generate
kube" as an alias of "kube generate".
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Integrate sd-notify policies into `kube play`. The policies can be
configured for all contianers via the `io.containers.sdnotify`
annotation or for indidivual containers via the
`io.containers.sdnotify/$name` annotation.
The `kube play` process will wait for all containers to be ready by
waiting for the individual `READY=1` messages which are received via
the `pkg/systemd/notifyproxy` proxy mechanism.
Also update the simple "container" sd-notify test as it did not fully
test the expected behavior which became obvious when adding the new
tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
implement new ssh interface into podman
this completely redesigns the entire functionality of podman image scp,
podman system connection add, and podman --remote. All references to golang.org/x/crypto/ssh
have been moved to common as have native ssh/scp execs and the new usage of the sftp package.
this PR adds a global flag, --ssh to podman which has two valid inputs `golang` and `native` where golang is the default.
Users should not notice any difference in their everyday workflows if they continue using the golang option. UNLESS they have been using an improperly verified ssh key, this will now fail. This is because podman was incorrectly using the
ssh callback method to IGNORE the ssh known hosts file which is very insecure and golang tells you not yo use this in production.
The native paths allows for immense flexibility, with a new containers.conf field `SSH_CONFIG` that specifies a specific ssh config file to be used in all operations. Else the users ~/.ssh/config file will be used.
podman --remote currently only uses the golang path, given its deep interconnection with dialing multiple clients and urls.
My goal after this PR is to go back and abstract the idea of podman --remote from golang's dialed clients, as it should not be so intrinsically connected. Overall, this is a v1 of a long process of offering native ssh, and one that covers some good ground with podman system connection add and podman image scp.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
The new apple silicon processesors (m1/m2) are capable of using a performent apple
hypervisor (included in macos). Our "virtual providers" for podman
machine are part of an interface design. This PR provides an
implementation of the interface to begin the work for supporting the
apple hypervisor. It is basically only a skeletal PR.
The actual code for using the hypervisor and launching a machine will
come as several new PRs following the inclusion of this one.
There will likely be code reuse between the applehv and qemu code; but
none of that code is being moved at this time. It will be moved "on
demand" during development.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
if an explicit mapping is specified, do not accept `--userns` since it
overriden to "private".
Closes: https://github.com/containers/podman/issues/15233
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
implement a new command `podman generate spec` which can formulate a json specgen to be consumed by both the pod
and container creation API.
supported flags are
--verbose (default true) print output to the terminal
--compact print the json output in a single line format to be piped to the API
--filename put the output in a file
--clone rename the pod/ctr in the spec so it won't conflict w/ an existing entity
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Tying filtering logic for podman stop and start to same place in getContainersAndInputByContext() to reduce code redundancy
Signed-off-by: Karthik Elango <kelango@redhat.com>
It's a NOP since Podman v2.0 (#5738).
[NO NEW TESTS NEEDED] - does not change behavior.
Fixes: #15185
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The "podman kube down" reads in a structured file of
Kubernetes YAML and removes pods based on the Kubernetes kind described in the YAML,
similiar to "podman play kube --down". Users will still be able to use
"podman play kube --down" and "podman kube play --down" to
perform the same function.
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
When podman kube play was added the endpoint for the kube play/play kube
commands was switched from the "play kube" endpoint to the new "kube play"
endpoint. This caused issues with the remote client, requiring the need
to use the "play kube" endpoint again in order to avoid these issues.
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
- Allow creating sigstore signatures via --sign-by-sigstore-private-key .
Like existing --sign-by, it does not work remote (in this case
because we would have to copy the private key to the server).
- Allow passing a passphrase (which is mandatory for sigstore private keys)
via --sign-passphrase-file; if it is not provided, prompt interactively.
- Also, use that passphrase for --sign-by as well, allowing non-interactive
GPG use. (But --sign-passphrase-file can only be used with _one of_
--sign-by and --sign-by-sigstore-private-key.)
Note that unlike the existing code, (podman build) does not yet
implement sigstore (I'm not sure why it needs to, it seems not to
push images?) because Buildah does not expose the feature yet.
Also, (podman image sign) was not extended to support sigstore.
The test for this follows existing (podman image sign) tests
and doesn't work rootless; that could be improved by exposing
a registries.d override option.
The test for push is getting large; I didn't want to
start yet another registry container, but that would be an
alternative. In the future, Ginkgo's Ordered/BeforeAll
would allow starting a registry once and using it for two
tests.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Also Fix usage of flag "--compression-format" for remote "podman image push". Fix usage of flags "--format", "--remove-signatures" in remote "podman manifest push".
Closes#15109.
Signed-off-by: Romain Geissler <romain.geissler@amadeus.com>
This Patch will cause podman COMMAND rm --force bogus not fail
This is how Docker works, so Podman should follow this to allow existing
scripts to convert from Docker to Podman.
Fixes: #14612
Oprignal version of this patch came from wufan 1991849113@qq.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
for podman pod create, when we are not sharing any namespaces there is no point for the infra container.
This is especially true since resources have also been decoupled from the container recently.
handle this on the cmd level so that we can still create infra if set explicitly
resolves#15048
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Most network commands/features work with both netavark and CNI. When
we added added netavark most docs were not vetted and thus still use CNI
network, it should just say network.
Fixes#14990
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
added the following flags and handling for podman pod create
--memory-swap
--cpuset-mems
--device-read-bps
--device-write-bps
--blkio-weight
--blkio-weight-device
--cpu-shares
given the new backend for systemd in c/common, all of these can now be exposed to pod create.
most of the heavy lifting (nearly all) is done within c/common. However, some rewiring needed to be done here
as well!
Signed-off-by: Charlie Doern <cdoern@redhat.com>
The same problem again as 4374038cc6.
Also fix the incorrect --format autocompletion struct.
It should be avoided to import cmd/podman/... packages from outside of
cmd/podman. This can lead in weird hard to debug import paths but also
can have negative consequences when imported in unit tests. In this case
it will set XDG_CONFIG_HOME and thus the machine tests this dir over the
tmp HOME env variable which is set at a later point. This caused machine
files to be leaked into the actual users home dir.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
--latest : pause/unpause the latest container.
--filter : pause/unpause the filtered container.
--cidfile : Read container ID from the specified file and pause/unpause the container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
When we pause `rootless cgroups v1 container`, podman returns error from `libpod.(*Container).pause`.
Podman does not need to return error from `containers.pause` because of duplicate.
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Docker supports -H and --host for specify the listening socket. Podman
should support them also in order to match the CLI.
These will not be documented since Podman defaults to using the
--url option.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Filter flag is added for podman stop and podman --remote stop. Filtering logic is implemented in
getContainersAndInputByContext(). Start filtering can be manipulated to use this logic as well to limit redundancy.
Signed-off-by: Karthik Elango <kelango@redhat.com>
I added the shorthand option for `podman pull --all-tags`. Like Docker,
Podman can now do `podman pull -a`.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
The "podman kube play" command is designed to be a replacement for the
"podman play kube" command.
It performs the same function as "play kube" while also still working with the same flags and options.
The "podman play kube" command is still functional as an alias of "kube play".
Closes#12475
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the docs for pull policies is consistent with Buildah and
reflects the implementation.
Further improve the help messages and auto completions.
[NO NEW TESTS NEEDED]
Fixes: #14846
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Podman wait should not be defaulting to just stopped. By default
wait API waits for stopped and exited. We should not override this on
the client side.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Refactored the networkPrune function to improve readability.
This commit changes the `networkPrune` function to
use the `PrintNetworkPruneResults` function.
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
It should be avoided to import cmd/podman/... packages from outside of
cmd/podman. This can lead in weird hard to debug import paths but also
can have negative consequences when imported in unit tests. In this case
it will set XDG_CONFIG_HOME and thus the machine tests this dir over the
tmp HOME env variable which is set at a later point. This caused machine
files to be leaked into the actual users home dir.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Update the podman pod unpause to only show the paused
containers with autocomplete.
Fix a typo in the help command.
Update the unpause function to only attempt an unpause
on pasued pods instead of all the pods.
Update the tests accordingly.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
add support for the --uts flag in pod create, allowing users to avoid
issues with default values in containers.conf.
uts follows the same format as other namespace flags:
--uts=private (default), --uts=host, --uts=ns:PATH
resolves#13714
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Previously, `podman system df --format "{{json .}}"` would not output
`Size` and `Reclaimable` like `podman system df` would.
```
{"Type":"Images","Total":5,"Active":0,"Size":39972240,"Reclaimable":39972240}
{"Type":"Containers","Total":0,"Active":0,"Size":0,"Reclaimable":0}
{"Type":"Local Volumes","Total":0,"Active":0,"Size":0,"Reclaimable":0}
```
Closes: #14769
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Following PR adds support for running containers from a manifest list
present on localstorage. Before this PR podman only supports running
containers from valid images but not from manifest list.
So `podman run -it --platform <some> <manifest-list> command` should
become functional now and users should be able to resolve images on the
bases of provided `--platform` string.
Example
```
podman manifest create test
podman build --platform linux/amd64,linux/arm64 --manifest test .
podman run --rm --platform linux/arm64/v8 test uname -a
```
Closes: https://github.com/containers/podman/issues/14773
Signed-off-by: Aditya R <arajan@redhat.com>
using the new resource backend, implement podman pod create --memory which enables
users to modify memory.max inside of the parent cgroup (the pod), implicitly impacting all
children unless overriden
Signed-off-by: Charlie Doern <cdoern@redhat.com>
at startup, when running on a cgroup v2 system, check if the current
process is running in the root cgroup and move it to a sub-cgroup,
otherwise Podman is not able to create cgroups and move processes
there.
Closes: https://github.com/containers/podman/issues/14573
[NO NEW TESTS NEEDED] it needs nested podman
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Podman Machine crashes if run as root. When creating the machine, we write the ignition so that the UID of the core user matches the UID of the user on the host. We by default, create the root user on the machine with UID 0. If the user on the host is root, the core UID and the Root UID collide, causing a the VM not to boot.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
cfg.RuntimePath was set to default runtime, so the empty string
check fails. Instead we could check if the flag was changed.
Signed-off-by: Zeyad Yasser <zeyady98@gmail.com>
add support for podman-remote image scp as well as direct access via the API. This entailed
a full rework of the layering of image scp functions as well as the usual API plugging and type creation
also, implemented podman image scp tagging. which makes the syntax much more readable and allows users t tag the new image
they are loading to the local/remote machine:
allow users to pass a "new name" for the image they are transferring
`podman tag` as implemented creates a new image im `image list` when tagging, so this does the same
meaning that when transferring images with tags, podman on the remote machine/user will load two images
ex: `podman image scp computer1::alpine computer2::foobar` creates alpine:latest and localhost/foobar on the remote host
implementing tags means removal of the flexible syntax. In the currently released podman image scp, the user can either specify
`podman image scp source::img dest::` or `podman image scp dest:: source::img`. However, with tags this task becomes really hard to check
which is the image (src) and which is the new tag (dst). Removal of that streamlines the arg parsing process
Signed-off-by: Charlie Doern <cdoern@redhat.com>
It seems like previously if --format was changed then listFlag.noHeading is changed accordingly
however printHeader is used to determine whether to print header or not.
This patch fixes that problem.
Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
Libpod requires that all volumes are stored in the libpod db. Because
volume plugins can be created outside of podman, it will not show all
available plugins. This podman volume reload command allows users to
sync the libpod db with their external volume plugins. All new volumes
from the plugin are also created in the libpod db and when a volume from
the db no longer exists it will be removed if possible.
There are some problems:
- naming conflicts, in this case we only use the first volume we found.
This is not deterministic.
- race conditions, we have no control over the volume plugins. It is
possible that the volumes changed while we run this command.
Fixes#14207
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Replace "setup", "lookup", "cleanup", "backup" with
"set up", "look up", "clean up", "back up"
when used as verbs. Replace also variations of those.
* Improve language in a few places.
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
'podman system prune' command always outputs "Deleted Images" message,
even though there is no dangling or unused image to remove.
This message should be output only if dangling or unused image exists.
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Update cobra to latest version. Remove workaround for podman -h.
Also regenerate the completion scripts.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
expose the --shm-size flag to podman pod create and add proper handling and inheritance
for the option.
resolves#14609
Signed-off-by: Charlie Doern <cdoern@redhat.com>
podman machine start contains more logic than just the simple vm.Start()
call. Instead of duplicating this into inti we just call start().
[NO NEW TESTS NEEDED] I have no way to test this right now.
Fixes#14640
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman -h` currently returns an error:
`Error: pflag: help requested`
This bug was introduced in 44d037898e, the problem is that we wrap the
error and cobra lib checks with `==` for this one and not errors.Is().
I have a PR upstream to fix this but for now this also works.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Commit 5fa6f686db added a regression which was fixed in eb71712626.
Apply the same fix again to prevent a panic and return a proper error
instead.
To not regress again I added a e2e test which makes sure we do not panic.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The nolintlint linter does not deny the use of `//nolint`
Instead it allows us to enforce a common nolint style:
- force that a linter name must be specified
- do not add a space between `//` and `nolint`
- make sure nolint is only used when there is actually a problem
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is an enhancement for the podman system prune feature.
In this issue, it is mentioned that 'network prune' should be
wired into 'podman system prune'
https://github.com/containers/podman/issues/8673
Therefore, I add the function to remove unused networks.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Changes since 2022-05-31:
- add --omit-history option (buildah PR 4028)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
command
Previously, if a container was not running, and the user ran the `podman
stats` command, an error would be reported: `Error: container state
improper`.
Podman now reports stats as the fields' default values for their
respective type if the container is not running:
```
$ podman stats --no-stream demo
ID NAME CPU % MEM USAGE / LIMIT MEM % NET IO BLOCK IO PIDS CPU TIME AVG CPU %
4b4bf8ce84ed demo 0.00% 0B / 0B 0.00% 0B / 0B 0B / 0B 0 0s 0.00%
```
Closes: #14498
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
implement podman pod clone, a command to create an exact copy of a pod while changing
certain config elements
current supported flags are:
--name change the pod name
--destroy remove the original pod
--start run the new pod on creation
and all infra-container related flags from podman pod create (namespaces etc)
resolves#12843
Signed-off-by: cdoern <cdoern@redhat.com>
I don't see a reason why we don't support --remove-signatures
from remote push, so adding support.
Fixes: https://github.com/containers/podman/issues/14558
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a new `--overwrite` flag to `podman cp` to allow for overwriting in
case existing users depend on the behavior; they will have a workaround.
By default, the flag is turned off to be compatible with Docker and to
have a more sane behavior.
Fixes: #14420
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Note that the bud-logfile-with-split-logfile-by-platform test is skipped
on the remote client (see #14544).
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
add an option to configure the driver timeout when creating a volume.
The default is 5 seconds but this value is too small for some custom drivers.
Signed-off-by: cdoern <cdoern@redhat.com>
- The State() function now returns machine.Starting status instead of an
empty string if the VM is in the process of starting.
- The `CheckExclusiveActiveVM()` function returns `true` to prevent
starting a VM while another is in the process of starting.
- `podman machine ls` displays "Currently starting" under "Last Up" for
the starting VM
- `podman machine ls` supports `{{.Starting}}` boolean field in the format
- `podman machine inspect` displays "starting" in the "State" field for
the starting VM
Signed-off-by: Shane Smith <shane.smith@shopify.com>
For some reason commit 5b79cf15a0 moved the container create options
parsing from cmd/podman/common to pkg/api/handlers. However it did not
remove the old code. Unfortunately it moved the code from an outdated
version and did not update it before this commit was merged.
Therefore a couple of regressions were introduced. I manually compared
both versions and found three missing bugfixes.
I fixed the network test again that was changed in bce97a3b5d. We
want bridge as default even as rootless. Sine the test is not run as
rootless in CI the regression was not caught.
Also the no hosts test never worked since it was missing the import
check if the hosts file exists.
I don't think we can check for the volume parsing change since this only
works on windows/wsl.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When you try to complete a path which exists and it is a file the
completion logic did not check the parent dir for other matching file
names. To fix that we have to check if the current completion is not a
dir and use the parent dir in this case.
See the updated test for an example why this is required.
Also make sure directories are correctly completed, the shell always
adds the "/" as suffix to signal the user that this path is a directory.
In this case we do not want to automatically add a space. When the path
is a regular file we want the space after the suggestion since there is
nothing more to complete.
This better matches the normal default shell completion.
The test were changed to not assume any particular ordering since this
is irrelevant for the shell completion script and there is no guarantee
about the ordering.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Firstly, reset is now managed by the runtime itself as a part of
initialization. This ensures that it can be used even with
runtimes that would otherwise fail to be created - most notably,
when the user has changed a core path
(runroot/root/tmpdir/staticdir).
Secondly, we now attempt a best-effort removal even if the store
completely fails to be configured.
Third, we now hold the alive lock for the entire reset operation.
This ensures that no other Podman process can start while we are
running a system reset, and removes any possibility of a race
where a user tries to create containers or pull images while we
are trying to perform a reset.
[NO NEW TESTS NEEDED] we do not test reset last I checked.
Fixes#9075
Signed-off-by: Matthew Heon <mheon@redhat.com>
In podman run --help, the message said megabyte, gigabyte, etc. In reality podman takes mebibytes, gibibytes, etc.
[CI:DOCS]
Signed-off-by: Karthik Elango <kelango@redhat.com>
The comma-separated podman load output isn't conducive for using the
subsequent images. For tarballs with multiple images, the comma
separator must be manually identified and a suitable range identified.
Docker CLI on the other hand, has one image identifier per line:
Loaded image: repo1/name1:latest
Loaded image: repo1/name1:tag1
Loaded image: repo2/name2:tag1
(as of Docker version 20.10.16, build aa7e414).
Switch `podman load` to this format for consistency and usability.
[NO NEW TESTS NEEDED]
Signed-off-by: Alexander Scheel <alex.scheel@hashicorp.com>
Add shell completion for paths inside the container or image. Currently
podman run IMAGE [TAB] only uses the default shell completion which
suggests paths on the host. This is fine for some cases but often the
user wants a path which only exists in the image/container.
This commits adds support for that. Both podman create/run can now
complete the paths from the image, podman cp ctr:... now completes paths
from the actual container.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When the volume does not exist we should output an error stating so and
not some generic one.
Fixes#14411
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Forward the ssh exit code to the podman caller. This is useful for
scripts. Use the same logic as podman unshare.
Fixes#14401
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Libpod or packages under /pkg should never import from /cmd/...
This will quickly result in import cycles and weird code paths.
Also there is no reason to use this special code we can just use
syscall.SIGHUB as SIGNAL.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allowing custom flags to provider has the potential to break all the
hand-crafted commands currently in use. This could become a support
nightmare.
```release-note
NONE
```
[NO NEW TESTS NEEDED]
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Buildah already supports using `--layers` with `--squash` after https://github.com/containers/buildah/pull/3674
if user wants to do so hence podman must honor similar configuration
in `--squash-all` behaviour if user wants to using cache.
PS: We cannot alter behaviour of `podman build --squash` for
docker-compat reasons hence this feature can be easily supported by
`--squash-all`.
Closes: https://github.com/containers/buildah/issues/4011
Signed-off-by: Aditya R <arajan@redhat.com>
These two functions were doing the exact same thing just
with cidfile and pod-id-file separately. Combine the functionality
to one function to remove repetative code.
Fix the TODO in cmd/podman/validate/args.go
[NO NEW TESTS NEEDED]
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Fix up the parseEnv function to differentiate
between a label and env when parsing.
Don't do a system lookup when parsing labels.
[NO NEW TESTS NEEDED]
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Same block contains similar lines above this is not needed as this looks
redundant.
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
Refactor test for deadlock by comparing error text vs. actual
ErrWillDeadlock constant. When running with --remote the error
constant will always be not equal to the error returned by the API.
```release-note
NONE
```
[NO NEW TESTS NEEDED]
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Option left in images/diff.go CLI as comment implies it is needed for
backwards compatibility.
```release-note
NONE
```
[NO NEW TESTS NEEDED]
Signed-off-by: Jhon Honce <jhonce@redhat.com>
I am constantly attempting to add the podname to the last
argument to podman pod create. Allowing this makes it match
podman volume create and podman network create.
It does not match podman container create, since podman container create
arguments specify the arguments to run with the container.
Still need to support the --name option for backwards compatibility.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
There is no good way to recommend labels for podman container runlabel.
Add the missing max-size log option. These are the only documented
options so the completion should not suggest something different.
Add proper --stop-signal completion. It will now complete all supported
signal names both upper and lowercase depending on the user input. Also
it work with and without the SIG prefix.
Fixing the TODOs in this file are more complicated since they describe
bigger features.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently this list is not exported from c/storage and the group
decided this will not be changed.
```release-note
NONE
```
Signed-off-by: Jhon Honce <jhonce@redhat.com>
- Look for and prevent lower-case arg descriptions:
podman cmd [arg]
- Look for and prevent optional-mandatory misordering:
podman cmd [ARG] ARG
- Tighter whitespace checks (and fix podman pod ps)
- simplify a no-longer-necessary mess! #8635 fixed the
horrible "CONTAINER | IMAGE" strings (with spaces),
so there's no longer a need to special-case those.
The one-extra-arg check is now much cleaner.
Minor refactoring.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure that `podman image mount` prints a pretty table unless there
is only argument passed and without a custom format. Fixing a TODO item
brought me to the specific code location and revealed the fart in the
logic.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
It is better to just reuse the existing constants instead of duplicating
the strings.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
docker-archive was missing from the completions. To prevent duplication
use the same format list as podman save.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add all option that are supported by the podman inspect --type flag to
the completions. Also use the same constants instead of duplicating the
strings. In order to do this I had to move the definitions into the
common package to prevent an import cycle.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The completion suggested incorrect values for `podman events --filter
type=` . It should only list types not the event status. Also make sure
to use the constants instead of duplicating the strings.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
From a template users POV it is not importent when they use a struct field or
method. They only notice the difference when the function requires arguments.
So lets be nice and let the user know that this method requires arguments
via the help text.
This is how it now looks like when the completion descriptions are enabled
on bash:
```
$ bin/podman ps --format {{.Created.A
{{.Created.AddDate (This is a function and requires 3 arguments) {{.Created.After (This is a function and requires 1 argument)
{{.Created.Add (This is a function and requires 1 argument) {{.Created.AppendFormat (This is a function and requires 2 arguments)
```
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently we only support structs in a template string like this:
`{{.var1.test.` -> this meams that test must be a struct field on var1.
Now with this var1 and test could also be either a map or function which
returns a struct.
A actual example:
`podman container inspect --format {{.NetworkSettings.Networks.netname.`
Now we can complete the struct fileds after netname. Note that this
cannot complete map keys since they are empty by default, so it is
impossible to get them in the completion logic.
Also this fixes a panic with embeeded nil structs
Fixes#14223
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a struct is embeeded it is possible that we end up with same names
but different types, this results in incorrect completions. The go
template logic always preferes the actual field/method name before the
one from the embedded one. Thefore the completion logic should do the
same. First get all method/fields names from the struct and then only
add the field names from the embedded struct when they are not already
present in the list.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
In a template you cann call function that are defined on a type, however
this is only useful if they return one value. If it returns more than
one the template cannot know what value it has to display.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
go templates only support exported fields, so the completion logic must
filter the private fields out.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The completion logic currently suggest also the functions that are
defined for this type. However this did not work correctly when it was
defined as pointer to that type on not the actual type.
This commit fixes that problem. To test you can compare the difference
between `podman stats --format {{.[TAB]` with and without this commit.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the notion of a "service container" to play kube. A service
container is started before the pods in play kube and is (reverse)
linked to them. The service container is stopped/removed *after*
all pods it is associated with are stopped/removed.
In other words, a service container tracks the entire life cycle
of a service started via `podman play kube`. This is required to
enable `play kube` in a systemd unit file.
The service container is only used when the `--service-container`
flag is set on the CLI. This flag has been marked as hidden as it
is not meant to be used outside the context of `play kube`. It is
further not supported on the remote client.
The wiring with systemd will be done in a later commit.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Rather than assuming a filesystem path, the API service URI is recorded
in the libpod runtime configuration and then reported as requested.
Note: All schemes other than "unix" are hard-coded to report URI exists.
Fixes#12023
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman system reset did not clean up machines fully, leaving some config
files, and breaking machines. Now it removes all machines files fully.
Signed-off-by: Ashley Cui <acui@redhat.com>
The default log driver is not used when using play kube
without --log-driver. The LogDriver function needs to
be called in order to use the default log driver.
fixes#13781
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I was asked to refactor machine inspect output to represent more common
and basic information. machine inspect now has information that would
be appropriate for different machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
podman image search accepts a go template, we can use the same shell
completion logic which is used everywhere else in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
For the AutocompleteFormat function we expect the correct template
struct which is used in the golang template. The function can handle
both struct and pointer to a struct. Using the reference is more
efficient since it doe snot have to copy the whole struct.
Also change some structs to use he actual type from the template instead
of some nested one to make sure it has to correct fields.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It used the wrong struct so not all fields were listed in the
completion.
Fixes podman images --format and podman image history --format
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We should not include the anonymous twice in the suggestions.
one example is `podman network ls --format {{.` it will also show
`{{.Network` but since Network is the actual struct all fields are
already shown so there is no need for it to be suggested.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
AutocompleteFormat() takes the format struct as argument. Often the structs
are deeply nested and contain other structs. Up until now if there was a
pointer to a struct the logic was not able to get the field names from
that, simply because the pointer was nil. However it is possible to
create a new initialized type with reflect.New(). This allows us to
complete all struct fields/functions even when there nil pointers.
Therefore we can drop the extra initialization which was done by some
callers.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Truncate by default to avoid long descriptions from rendering the output
unreadable.
[NO NEW TESTS NEEDED]
Fixes: #14044
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Allow podman machine set to change CPUs, Memory and Disk size of a QEMU machine after its been created.
Disk size can only be increased.
If one setting fails to be changed, the other settings will still be applied.
Signed-off-by: Ashley Cui <acui@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Removing two files that are not needed. One is likely an accidental
check-in and the other is a empty file.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Based on WSL2 9p support: remaps windows paths to /mnt/<drive> locations for
both podman and Docker API clients.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
podman machine was using the file modification time to get the running status
add three new config entries Starting (bool) Created (time) LastUp (time) to actually
keep track of when these events happened. This means we can use the config file
to actually store this data and not mess up the created/last-up time.
This fixes the issues where the machine would report running 15 seconds before it was up.
Also fixes the issue of modifying the file manually and saying the machine is "up"
[NO NEW TESTS NEEDED]
resolves#13711
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
This PR introduces a test suite for podman machine. It can currently be
run on developers' local machines and is not part of the official CI
testing; however, the expectation is that any work on machine should
come with an accompanying test.
At present, the test must be run on Linux. It is untested on Darwin.
There is no Makefile target for the test. It can be run like `ginkgo -v
pkg/machine/test/.`. It should be run as a unprivileged user.
Signed-off-by: Brent Baude <bbaude@redhat.com>
go1.18 deprecates `strings.Title()`. However for our use case this is
still fine. The recommended replacement is adding about 400kb binary
size so lets keep using this for now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This reverts commit cc3790f332.
We can't change rootful to rootfull because `rootful` is written into the machine config. Changing this will break json unmarshalling, which will break existing machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
golang.org/x/crypto/ssh/terminal is deprecated. The package was moved to
golang.org/x/term. golang.org/x/crypto/ssh/terminal was already just
calling golang.org/x/term itslef so there are no functional changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We are inconsistent on the name, we should stick with rootfull.
[NO NEW TESTS NEEDED] Existing tests should handle this and no tests for
machines exists yet.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
From a security point of view, it would be nice to be able to map a
rootless usernamespace that does not use your own UID within the
container.
This would add protection against a hostile process escapping the
container and reading content in your homedir.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This is an enhancement proposal for the checkpoint / restore feature of
Podman that enables container migration across multiple systems with
standard image distribution infrastructure.
A new option `--create-image <image>` has been added to the
`podman container checkpoint` command. This option tells Podman to
create a container image. This is a standard image with a single layer,
tar archive, that that contains all checkpoint files. This is similar to
the current approach with checkpoint `--export`/`--import`.
This image can be pushed to a container registry and pulled on a
different system. It can also be exported locally with `podman image
save` and inspected with `podman inspect`. Inspecting the image would
display additional information about the host and the versions of
Podman, criu, crun/runc, kernel, etc.
`podman container restore` has also been extended to support image
name or ID as input.
Suggested-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
The podman machine ls command would benefit from a --quiet flag which
would only print the machine names without the extra information. It
also implies --noheader as well. This can be helpful for scripting with
the podman cli.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
containers.conf now has a default volumes field for podman machine.
this pr inserts those values as the default volumes in init.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
`DefineCreateFlags` was excluding clone from using the memory-swappiness flag leading the value to be zero
when our deafult is -1. Rearrange the if/else to give clone these memory related options
resolves#13856
Signed-off-by: cdoern <cdoern@redhat.com>
It allows to customize the entry that is written to the `/etc/passwd`
file when --passwd is used.
Closes: https://github.com/containers/podman/issues/13185
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This reverts commit e133a06d2f.
@nalind found a proper fix in c/storage [1] to address the performance
issue. So we really don't need the flag anymore. Note the flag has
never made it into any release.
[1] d76b3606fc
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
For better docker compatibility we should use the bridge network mode as
default for rootless. This was already done previously but commit
535818414c introduced this regression in v4.0.
Since the apiv2 test are only run rootful we cannot catch this problem
in CI.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow users to inspect their podman virtual machines. This will be
helpful for debug and development alike, because more details about the
machine can be collected.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
The API endpoints should properly honour the `no_hosts=true` setting in
containers.conf.
Fixes#13719
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a new flag to set the ipam-driver. Also adds a new ipam driver none
mode which only creates interfaces but does not assign addresses.
Fixes#13521
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a --size option to podman images to allow for disabling computing
the size of listed images. If listing images is critical to
performance, user may chose to turn off size computation to speed things
up.
Context: #13755
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When you run podman-remote unsahre for example you currently get:
Error: unrecognized command `podman-remote unshare`
This is because we do not add the command to the cobra tree when we run
in remote mode. However this is a bad user experience since it is not
clear that the command is only supported for local podman. Users are
left wondering why this does not work and could think the documentation
is wrong.
To fix it we add a clear error message:
Error: cannot use command "podman-remote unshare" with the remote podman client
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
the way machine was written was very adjunct and as such is in dire need
of refactoring to better structures and structure methods where
appropriate. the weekest part is specifically around all the files that
machine requires and how some are just dynamically built on the fly.
this pr defines a new machinefile type which allows us to work with the
file and also takes into account the use of symlinks which are going to
be needed on macos due to its relatively short file length restriction.
also, added unit tests for new methods as well as anywhere else I saw a
need.
Signed-off-by: Brent Baude <bbaude@redhat.com>
When podman gets an error it prints out "Error: " before
printing the error string. If the error message starts with
error, we end up with
Error: error ...
This PR Removes all of these stutters.
logrus.Error() also prints out that this is an error, so no need for the
error stutter.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Flag is actually named `rootful` however documented as `root`, fix the
documented example as actual flag.
Both `podman machine init` and `podman machine set` uses flag `rootfull`
[NO TESTS NEEDED]
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
The PlayKube and PlayKubeDown commands accepted a "path" argument to a YAML file
to play. This requires the caller to write the YAML to a file path. The downside
of this is apparent in the HTTP handlers which have to use a temporary file on
disk to store the YAML file.
The file is opened & used as the body of the HTTP request. It's possible to
instead pass a io.Reader and use a fully in-memory request body.
Add backwards-compatible changes to bindings to allow passing either a filepath
or a io.Reader body.
Refactor the podman bindings to use a io.Reader instead of a filepath.
Simplify the HTTP handlers for PlayKube by removing the now unneeded tempfile.
[NO NEW TESTS NEEDED]
Signed-off-by: Christian Stewart <christian@paral.in>
Allows users to set `--os` , `--arch` and `--variant` of the image
created from the custom import.
Following is useful when user is already aware of the values which are
correct for their generated rootfs
Signed-off-by: Aditya R <arajan@redhat.com>
Still an unknown number remains but I am running out of patience.
Adding dots is not the best use of my time.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The calculate the percentage we need floating point numbers. The current
code however casted the result of reclaimable/size to an int first.
Casting to an int in go will just discard the decimal points, thus the
result was either 0 or 1 so if multiplied by 100 it would show up as 0%
or 100%.
To fix this we have to multiply by 100 first before casting the result
to an int. Also add a check for div by zero which results in NaN and use
math.Round() to correctly round a number.
Ref #13516
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* supports Go 1.18
* disable a number of new linters
* fix minor stylecheck issues
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add an `--ignore` flag to `podman image rm` to instruct ignoring image
if a specified image does not exist and to not throw an error. Other
commands (e.g., `podman container rm`) already support this flag.
Such an `--ignore` flag can come in handy in clean-up scripcts such as
the teardown phases in the Podman tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Docker Compose v2.0 passes mount specifications in two different
places: Volumes (just the destination) and Mounts (full info
provided - source, destination, etc). This was causing Podman to
refuse to create containers, as the destination was used twice.
Deduplicate between Mounts and Volumes, preferring volumes, to
resolve this.
Fixes#11822
Signed-off-by: Matthew Heon <mheon@redhat.com>
When podman is build without git commit information it will print a
empty newline instead. This is undesirable and a regression introduced
in commit 7d22cc88ef.
To test build podman with `go build -mod=vendor -o bin/podman ./cmd/podman`
and check the output of bin/podman version with and without this commit.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow users to add annotions in the podman play kube command.
This PR Also fixes the fact that annotations in the pod spec were
not being passed down to containers.
Fixes: https://github.com/containers/podman/issues/12968
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The permissions on disk were wrong since we were not converting to
octal.
Fixes: https://github.com/containers/podman/issues/13108
[NO NEW TESTS NEEDED] Since we don't currently test using the docker
client
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If you want to remove a running machine, you can now pass the --force/-f
to podman machine rm and the machine will be stopped and removed without
confirmations.
Fixes: #13448
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
This option was requested so that users could specify alternate
locations to find context directories for each image build. It
requites the --build option to be set.
Partion Fix: https://github.com/containers/podman/issues/12485
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow users to commit containers into a single layer.
Usage
```bash
podman container commit --squash <name>
```
Signed-off-by: Aditya R <arajan@redhat.com>
`podman play kube` tries to build images even if `--build` is set to
false so lets honor that and make `--build` , `true` by default so it
matches the original behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
Add a extra `See 'podman command --help'` to the error output.
With this patch you now get:
```
$ podman run -h
Error: flag needs an argument: 'h' in -h
See 'podman run --help'
```
Fixes#13082Fixes#13002
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
I do not know why this code was added but it is wrong. We should never
use a plugin dir as config dir. Also this will fail for netavark. The
correct default will be set in c/common so podman should not touch it.
[NO NEW TESTS NEEDED]
Ref #13183
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
podman system prune should also remove all networks. When we want to
users to migrate to the new network stack we recommend to run podman
system reset. However this did not remove networks and if there were
still networks around we would continue to use cni since this was
considered an old system.
There is one exception for the default network. It should not be removed
since this could cause other issues when it no longer exists. The
network backend detection logic ignores the default network so this is
fine.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Alpine does not seem to use search correctly when there are multiple
search domains on the same line. It only uses the first with the advent.
When podman runs within a separate network we are appending on
dns.podman as a search, if you add a search domain, then this causes the
local search on network to fail.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
[NO NEW TESTS NEEDED] image scp was reading the localhost syntax too loosely causing some errors with domains or hosts containing the word
localhost. Fixed that and added a few lines to make sure the pure localhost connections do not touch sshd
resolves#13021
Signed-off-by: cdoern <cdoern@redhat.com>
podman network create --subnet, --gateway and --ip-range can now be
specified multiple times to join the network to more than one subnet.
This is very useful if you want to use a dual stack network and assign a
fixed ipv4 and ipv6 subnet. The order of the options is important here,
the first --gateway/--ip-range will be assigned to the first subnet and
so on.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bumps Buildah to v1.24.0 and adopts the new values for pull:
true, false, never, and always. The pull-never and pull-always options
for the build command are still usable, but they have been removed from
the man page documentation with this change.
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
machinectl does not propogate error messages and adds extra lines in the output, exec.Cmd is able to clear the env besides PATH and TERM,
and use the given UID and GID to execute the command properly.
machinectl is still used to create a user session. Ubuntu support is limited by this.
Signed-off-by: cdoern <cdoern@redhat.com>
When we run rootless buildah needs to have IsolationOCIRootless set
otherwise it will run code which cannot be used as rootless user.
Podman should use the buildah default if possible and change it to
rootless mode if needed.
[NO NEW TESTS NEEDED] Should be covered by existing tests once we have
podman-remote rootless tests.
Fixes#12989
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Before this PR, the podman --help command shows the defaults
as runc and overlay even if the storage.conf and containers.conf
files do not match. This PR changes them to show the actual defaults
and in the case of storage driver, does not show the default at all.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Heuristic to initialize TunnelMode/remote podman:
- Podman built with remote tag
- Podman running on darwin or windows GOOS
- CONTAINER_HOST or CONTAINER_CONNECTION set in environment
- --remote flag given on command line
- From containers.conf, Engine.Remote == true and GOOS == linux
Otherwise, podman will run in ABIMode/linked against libpod library.
Fixes#12866
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This commit includes:
* Handlers for generate systemd unit
with manually defined dependencies such as:
Wants=, After= and Requires=
* The new unit and e2e tests for checking generated systemd units
for container and pod with custom dependencies
* Documented descriptions for custom dependencies options
Signed-off-by: Eugene (Evgenii) Shubin <esendjer@gmail.com>
Since this option will also be used for netavark we should rename it to
something more generic. It is important that --cni-config-dir still
works otherwise we could break existing container cleanup commands.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Improve our compatibility with Docker by better handling the
state strings that we print in `podman ps`. Docker capitalizes
all states in `ps` (we do not) - fix this in our PS code. Also,
stop normalizing ContainerStateConfigured to the "Created" state,
and instead make it always be Created, with the existing Created
state becoming Initialized.
I didn't rename the actual states because I'm somewhat reticent
to make such a large change a day before we leave for break. It's
somewhat confusing that ContainerStateConfigured now returns
Created, but internally and externally we're still consistent.
[NO NEW TESTS NEEDED] existing tests should catch anything that
broke.
I also consider this a breaking change. I will flag appropriately
on Github.
Fixes RHBZ#2010432 and RHBZ#2032561
Signed-off-by: Matthew Heon <mheon@redhat.com>
This commit unifies the method of filters parsing in cmd.
It removes also the function redundancy.
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
* Update method/function signatures use the manifest list name and
images associated with the operation explicitly, in general
func f(ctx context.Context, manifestListName string,
ImageNames []string, options *fOptions)
* Leverage gorilla/mux Subrouters to support API v3.x and v4.x for
manifests
* Make manifest API endpoints more RESTful
* Add PUT /manifest/{id} to update existing manifests
* Add manifests.Annotate to go bindings, uncommented unit test
* Add DELETE /manifest/{Id} to remove existing manifest list, use
PUT /manifest/{id} to remove images from a list
* Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use
PUT /manifest/{id} instead
* Corrected swagger godoc and updated to cover API changes
* Update podman manifest commands to use registry.Context()
* Expose utils.GetVar() to obtain query parameters by name
* Unexpose server.registerSwaggerHandlers, not sure why this was ever
exposed.
* Refactored code to use http.Header instead of map[string]string when
operating on HTTP headers.
* Add API-Version header support in bindings to allow calling explicate
versions of the API. Header is _NOT_ forwarded to the API service.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman build always finds the abs path but was never using it for the containerfile path. This
was causing the remote client to be given a relative path that does not exist. Switch to evaluating and using absolute paths only.
resolves#12841
Signed-off-by: cdoern <cdoern@redhat.com>
Support removing the entire pod when --depend is used on an infra
container. --all now implies --depend to properly support removing all
containers and not error out when hitting infra containers.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
added support for pod wide sysctls. The sysctls supported are the same as the continer run controls.
These controls are only valid if the proper namespaces are shared within the pod, otherwise only the infra ctr gets the sysctl
resolves#12747
Signed-off-by: cdoern <cdoern@redhat.com>
Relay --quiet to save & load commands, in both Rootless
and Rootful transfer functions.
Also, a little cleanup:
- remove unuseful SOURCE/DEST printfs
- refactor duplication in execMachine()
- fix Debug("Executing") statements to include the actual
command they're executing
[NO NEW TESTS NEEDED] : Tests are being slowly implemented in #12797
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Signed-off-by: Ed Santiago <santiago@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are seeing some issues with users not understanding which VM they are
starting, and if the VM takes a long time to start, they do not know
where to look.
Moving the name to before the VM starts at least allows them to realize
they are starting the wrong VM.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
this commit fixes two bugs and adds regression tests.
when getting healthcheck values from an image, if the image does not
have a timeout defined, this resulted in a 0 value for timeout. The
default as described in the man pages is 30s.
when inspecting a container with a healthcheck command, a customer
observed that the &, <, and > characters were being converted into a
unicode escape value. It turns out json marshalling will by default
coerce string values to ut8.
Fixes: bz2028408
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add the --ipv6 flag to podman create/run and pod create. We support the
--network name:ip6=<ip> syntax now but for docker compat we should also
support the --ip6 flag.
Note that there is no validation if the ip is actually a v6 or v4 address
because the backend does not care either.
Fixes#7511
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the same type of mounts for all the machine volumes.
The default could change in the future, depending on OS.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Allow using the built-in 9pfs feature of qemu,
mounting host directories into vm mountpoints.
The volumes are generic, the mounts are specific.
Wait for the machine to be "running", otherwise
the SSH function might throw an error instead.
Increase the default msize from 8 KiB to 128 KiB
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves#12173
Signed-off-by: cdoern <cdoern@redhat.com>
Podman image scp should never enter the Podman UserNS unless it needs to. This allows for
a sudo exec.Command to transfer images to and from rootful storage. If this command is run using sudo,
the simple sudo podman save/load does not work, machinectl/su is necessary here.
This modification allows for both rootful and rootless transfers, and an overall change of scp to be
more of a wrapper function for different load and save calls as well as the ssh component
Signed-off-by: cdoern <cdoern@redhat.com>
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Ashley Cui
Daniel J Walsh
Chris Evich
OpenShift Merge Robot
Paul Holzinger
Ygal Blum
Stefano Brivio
Valentin Rothberg
Alexander Larsson
Urvashi Mohnani
Debarshi Ray
Jake Correnti
dependabot[bot]
Boaz Shuster
Radostin Stoyanov
Charlie Doern
Ed Santiago
😎Mostafa Emami
Chris Evich
Jason T. Greene
Toshiki Sonoda
Barnabé BALP
Arthur Sengileyev
Giuseppe Scrivano
Doug Rabson
Miloslav Trmač
Brent Baude
Aditya R
Niall Crowe
Vladimir Kochnev
Hoang Thanh VO
Nalin Dahyabhai
Tom Sweeney
openshift-ci[bot]
Karthik Elango
Romain Geissler
Erik Sjölund
Sascha Grunert
Zeyad Yasser
cdoern
Shane Smith
Matthew Heon
Alexander Scheel
Jhon Honce
gcalin
Christian Stewart
LStandman
Xueyuan Chen
Morten Linderud
esendjer
Valentin Rothberg
Jakub Guzik
Anders F Björklund
Jason T. Greene