Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
This mirrors how the Docker API handles things, allowing us to be
more compatible with Docker and more verbose on the Libpod API.
Stats are given as per network interface in the container, but
still aggregated for `podman stats` and `podman pod stats`
display (so the CLI does not change, only the Libpod and Compat
APIs).
Signed-off-by: Matt Heon <mheon@redhat.com>
The pasta network mode has been added in podman v4.4 and this causes a
conflict with named networks that could also be called "pasta". To not
break anything we had special logic to prefer the named network over the
network mode. Now with 5.0 we can break this and remove this awkward
special handling from the code.
Containers created with 4.X that use a named network pasta will also
continue to work fine, this chnage will only effect the creation of new
containers with a named network pasta and instead always used the
network mode pasta. We now also block the creation of networks with the
name "pasta".
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When inspecting a container that does not define any health check, the health field should return nil. This matches docker behavior.
Signed-off-by: Ashley Cui <acui@redhat.com>
SpecGen is our primary container creation abstraction, and is
used to connect our CLI to the Libpod container creation backend.
Because container creation has a million options (I exaggerate
only slightly), the struct is composed of several other structs,
many of which are quite large.
The core problem is that SpecGen is also an API type - it's used
in remote Podman. There, we have a client and a server, and we
want to respect the server's containers.conf. But how do we tell
what parts of SpecGen were set by the client explicitly, and what
parts were not? If we're not using nullable values, an explicit
empty string and a value never being set are identical - and we
can't tell if it's safe to grab a default from the server's
containers.conf.
Fortunately, we only really need to do this for booleans. An
empty string is sufficient to tell us that a string was unset
(even if the user explicitly gave us an empty string for an
option, filling in a default from the config file is acceptable).
This makes things a lot simpler. My initial attempt at this
changed everything, including strings, and it was far larger and
more painful.
Also, begin the first steps of removing all uses of
containers.conf defaults from client-side. Two are gone entirely,
the rest are marked as remove-when-possible.
[NO NEW TESTS NEEDED] This is just a refactor.
Signed-off-by: Matt Heon <mheon@redhat.com>
Cut is a cleaner & more performant api relative to SplitN(_, _, 2) added in go 1.18
Previously applied this refactoring to buildah:
https://github.com/containers/buildah/pull/5239
Signed-off-by: Philip Dubé <philip@peerdb.io>
* Add BaseHostsFile to container configuration
* Do not copy /etc/hosts file from host when creating a container using Docker API
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
When committing containers to create new images, accept a container
config blob being passed in the body of the API request by adding a
Config field to our API structures. Populate it from the body of
requests that we receive, and use its contents as the body of requests
that we make.
Make the libpod commit endpoint split changes values at newlines, just
like the compat endpoint does.
Pass both the config blob and the "changes" slice to buildah's Commit()
API, so that it can handle cases where they overlap or conflict.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Podman build --remote is translating https://path as if it was a file
path. This change will leave it as a URL so it can be parsed on the
server side.
Fixed: https://github.com/containers/podman/issues/20475
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
commit fa19e1baa2 partially introduced
the fix, but was merged too quickly and didn't work with remote.
Introduce a new binding to allow removing a session from the remote
client.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When trying to connect a container to a network and the connection
already exists, an error should only be raised if the container is
already running (or is in the `ContainerStateCreated` transition)
to mimic the behavior of Docker as described here:
https://github.com/containers/podman/pull/15516#issuecomment-1229265942
For running and connected containers 403 is returned which fixes#20365
Signed-off-by: Philipp Fruck <dev@p-fruck.de>
Allow users to specify
podman-remote top $cid -eo "pid comm"
or
podman-remote top $cid -eo pid,comm
Fixes: https://github.com/containers/podman/issues/19176
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
didid# new file: test/system/085-top.bats
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Break out the code for pulling images via the compat API. The goal is to
make this code shareable between the compat and libpod API to allow for
a "compat mode" in the libpod pull endpoint.
[NO NEW TESTS NEEDED] as it should not change behavior.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The network list compat API requires us to include all containers with
their ip addresses for the selected networks. Because we have no network
-> container mapping in the db we have to go through all containers
every time. However the old code did it in the most ineffective way
possible, it quered the containers from the db for each individual
network. The of course is extremely expensive. Now the other expensive
call is calling Inspect() on the container each time. Inspect does for
more than we need.
To fix this we fist query containers only once for the API call, then
replace the inspect call with directly accessing the network status.
This will speed things up a lot!
The reported scenario includes 100 containers and 25 networks,
previously it took 1.5s for the API call not it takes 24ms, that is a
more than a 62x improvement. (tested with curl)
[NO NEW TESTS NEEDED] We have no timing tests.
Fixes#20035
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add support for --layerLabel.
Support for --cw is only added for the local client. I am not sure how
I would wire this over remote. The current code parse the options in
the frontend which hard codes the Tmpdir field to an incorrect value if
we would json marshal this vie remote API so it would not work in real
remote cases.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
pkg/api/handlers is used for type definitions by pkg/bindings,
i.e. podman-remote; a libimage dependency means that podman-remote
would also include libimage.
Instead, move the ImageDataToImageInspect function close to the
only user (and make it private).
[NO NEW TESTS NEEDED]: Only moves unchanged code (apart from a required
warning fix), should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
The docker client expects to read the OSType header from the `/_ping` response in order to determine the OS type of the server, for example, when running `docker run --device=/dev/fuse ...`
https://github.com/moby/moby/blob/master/client/ping.go#L57
Signed-off-by: chnrxn <cohawk@yahoo.com>
Currently containers created via DOCKER API without specifying
StopTimeout are defaulting to 0 seconds. This change should
default them to setting in containers.conf normally 10 seconds.
Fixes: https://github.com/containers/podman/issues/19139
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This reverts commit 5b148a0a68.
Reverting to treating the `pull` query parameter as a boolean.
Because of deceiving Docker API documentation it was assumed that the
parameter is pull-policy, however that is not true. Docker does treat
`pull` as a boolean. What is interesting is that Docker indeed accepts
strings like `always` or `never` however Docekr both of these strings
treat as `true`, not as pull-policy. As matter of the fact it seems
there is no such a thing as pull-policy in Docker.
More context https://github.com/containers/podman/issues/17778#issuecomment-1673931925
Signed-off-by: Matej Vasek <mvasek@redhat.com>
Compat api for containers/stop should take -1 value
Add support for `podman stop --time -1`
Add support for `podman restart --time -1`
Add support for `podman rm --time -1`
Add support for `podman pod stop --time -1`
Add support for `podman pod rm --time -1`
Add support for `podman volume rm --time -1`
Add support for `podman network rm --time -1`
Fixes: https://github.com/containers/podman/issues/17542
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Adds support for `since` as a valid filter option for `podman volume ls`
and `podman volume prune`.
Implements: #19228
Initially suggested from: #19119
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Fixes a bug where `podman volume ls` with multiple `label` filters would
return volumes that matched *any* of the filters, not *all* of them.
Adapts generating volume filter functions to be more in
line with how it is done for containers and pods.
Fixes: #19219
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
This endpoint queried the same package versions twice causing it to be
slower than info. Because it already called info we can just reuse the
package versions from there.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This adds the 'system service' command to the build on FreeBSD and
suppresses the call to servicereaper.Start which is only needed to
support slirp4netns on Linux. A stub for compat.StatsContainer is also
added - stats are still supported via the libpod.StatsContainer API
call.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
It is pretty complicated to display the secret on the host, but is
not really secured. This patch makes it easier to examine the secret.
Partial fix for https://github.com/containers/podman/issues/18667
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Wait before sending status code 200 for the first top call and if that
fails return a proper error code.
This was leading to some confusion in [1] because podman just reported
200 but did not wirte anything back.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2215572
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Massage the internal APIs to use a string slice instead of a state slice
for passing wait conditions. This paves the way for waiting on
non-state conditions such as "healthy".
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the create endpoint does not always return 200 even in
case of a failure. Some of the code had to be massaged since encoding a
report implies sending a 200.
Fixes: #15828
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the push endpoint does not always return 200 even in case
of a push failure. Some of the code had to be massaged since encoding a
report implies sending a 200.
Fixes: #18751
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The platform parameter has been ignored such that images have been
looked up by name only.
Fixes: #18951
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fixes: https://github.com/containers/podman/issues/18239
[NO NEW TESTS NEEDED]
@test "podman build -f test" in test/system/070-build.bats
Will test this. This was passing when run on a local system since
the remote end was using the clients path to read the Containerfile
The issue is it would not work in a podman machine since the
Containerfile would/should be a different path.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Also reflect removed/deprecated fields in the compat API.
[NO NEW TESTS NEEDED]
Signed-off-by: Renovate Bot <bot@renovateapp.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Accept a tag in the compat api endpoint. For the fromImage param we
already parse it but for fromSrc we did not.
Fixes#18597
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
openshift-merge-bot[bot]
Matt Heon
Paul Holzinger
Ashley Cui
renovate[bot]
Philip Dubé
Gavin Lam
Nalin Dahyabhai
Brent Baude
Giuseppe Scrivano
Daniel J Walsh
openshift-ci[bot]
Philipp Fruck
Aditya R
Valentin Rothberg
OpenShift Merge Robot
Miloslav Trmač
chnrxn
Matej Vasek
Jake Correnti
Doug Rabson
Boaz Shuster