Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Ongoing steps toward RUN-1907: replace Exit(0) with ExitCleanly()
Commit 1 of 2: simple automated string-replace, plus fixes
to includes.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Followup to #18578: move Serial to Describe(), in case new
tests get added to this module. And, explain the reasoning.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Reason: gpg tests all run with a different GNUPGHOME, and gpg-agent
does not like that, and there's no longer any way to run gpg
without the agent. So, do not run these tests in parallel, and
clean up agent after each test.
Fixes: #17966 (I hope)
May also fix#18358 but it will take some time to be sure.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There is no reason to define the same code every time in each file, just
use global nodes. This diff should speak for itself.
CleanupSecrets()/Volume() no longer call Cleanup() directly, as the
global AfterEach node will always call Cleanup() this is no longer
necessary. If one AfterEach() node fails it will still run the others.
Also always unset the CONTAINERS_CONF env vars. This prevents people
from forgetting to unset it. And fix the special CONTAINERS_CONF logic
in the system connection tests, we do not want to preserve
CONTAINERS_CONF anyway so just remove this logic.
Ginkgo orders the BeforeEach and AfterEach nodes. They will be executed
from the outer-most defined to inner-most. This means our global
BeforeEach is always first. Only then the inner one (in the Describe()
function in each file). For AfterEach it is inverted, from the inner to
the outer.
Also see https://onsi.github.io/ginkgo/#organizing-specs-with-container-nodes
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Directly writing to stdout/err is not safe when run in parallel.
Ginkgo v2 fixed this buffering the output and syncing the output so it
is not mangled between tests.
This means we should use the GinkgoWriter everywhere to make sure the
output stays in sync.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
By default go will not keep the stdout/err attach when executing
commands via exec.Command(). It is required to explicitly pass the
current stdout/err fds down to the child so we can see the error output
in the logs to debug #17966.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`os.ReadDir` was added in Go 1.16 as part of the deprecation of `ioutil`
package. It is a more efficient implementation than `ioutil.ReadDir`.
Reference: https://pkg.go.dev/io/ioutil#ReadDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Write a BeValidJSON() matcher, and replace IsJSONOutputValid():
sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go
(Plus a few manual tweaks)
Signed-off-by: Ed Santiago <santiago@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
podman image sign handles muti-arch images.
--all option to create signature for each manifest from the image manifest list.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Add some more tests, document cases where remote will not work
Add FIXMEs for tests that should work on podman-remote but currently
do not.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- fix the bud podman not using specified --directory as signature storage.
- use manifest and image referce to set repo@digest.
close#6994close#6993
Signed-off-by: Qi Wang <qiwan@redhat.com>
Matt Heon
Ed Santiago
Paul Holzinger
Eng Zer Jun
Valentin Rothberg
Qi Wang
Daniel J Walsh