The dangling filter determine whether a volume is dangling - IE,
it has no containers attached using it. Unlike our other filters,
this one is a boolean - must be true or false, not arbitrary
values.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Throw an error if a specified tag does not exist. Also make sure that
the user input is normalized as we already do for `podman tag`.
To prevent regressions, add a set of end-to-end and systemd tests.
Last but not least, update the docs and add bash completions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When going through the output of `podman inspect` to try and
identify another issue, I noticed that Podman 2.0 was setting
StopSignal to 0 on containers by default. After chasing it
through the command line and SpecGen, I determined that we were
actually not setting a default in Libpod, which is strange
because I swear we used to do that. I re-added the disappeared
default and now all is well again.
Also, while I was looking for the bug in SpecGen, I found a bunch
of TODOs that have already been done. Eliminate the comments for
these.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
specify the mappings in the container configuration to the storage
when creating the container so that the correct mappings can be
configured.
Regression introduced with Podman 2.0.
Closes: https://github.com/containers/libpod/issues/6735
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
...plus a few others. And fixes to actual parsing.
If a command's usage message includes '...' in the
argument list, assume it can take unlimited arguments.
Nothing we can check.
For all others, though, the ALL-CAPS part on the
right-hand side of the usage message will define
an upper bound on the number of arguments accepted
by the command. So in our 'podman --help' test,
generate N+1 args and run that command. We expect
a 125 exit status and a suitably helpful error message.
Not all podman commands or subcommands were checking,
so I fixed that. And, fixed some broken usage messages
(all-caps FLAGS, and '[flags]' at the end of 'ARGS').
Add new checks to the help test to prevent those in
the future.
Plus a little refactoring/cleanup where necessary.
Signed-off-by: Ed Santiago <santiago@redhat.com>
With Podman v2.0, we broke (or thought we were going to break)
using `--privileged` with `--group-add` and `--security-opt`
(specifically using `--security-opt` for SELinux config).
Signed-off-by: Matthew Heon <mheon@redhat.com>
Reversion of one part of #6679: my handling of 'realpath'
would not work when $PODMAN is 'podman-remote --url etc'.
Trying to handle that case got unmaintainable; so instead
let's just force 'make {local,remote}system' to invoke
with a full PODMAN path. This breaks down if someone
runs the tests with a manual 'bats' invocation, but I
think I'm the only one who ever does that.
Since podman path will now be very long in the logs,
add code to logformatter to abbreviate it like we do
for the ginkgo logs.
And, one thing that has bugged me for a long time:
in the error logs, show a different prompt ('#' vs '$')
to distinguish root vs rootless. This should make it
much easier to see at-a-glance whether a log file
is root or not. Add tests for it.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Disable the args requirement of `image load`. Instead of requiring a
lower bound, we really need an upper one with at most 1 argument.
Extend the system tests to prevent future regressions.
Fixes: #6718
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
- rm: confirm 'rm' and 'rm -f' on running container
- build: shotgun test of workdir, cmd, env, labels
The new build test cd's to a temporary directory, which broke
test invocations using a relative path (./bin/podman). Added
code to detect relative paths and convert them to absolute.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Support both `last` and `limit` for in the containers listing endpoint.
We intended to use `limit` which is also mentioned in the docs, but the
implementation ended up using `last` as the http parameter; likely being
caused by the CLI using `--last`. To avoid any regression, we decided
for supporting both and aliasing `last`.
Fixes: #6413
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This incorporates code from PR #6591 and #6614 but does not use
event channels to detect container state and rather uses timers
with a defined wait duration before calling t.StopAtEOF() to
ensure the last log entry is output before a container exits.
The polling interval is set to 250 milliseconds based on polling
interval defined in hpcloud/tail here:
https://github.com/hpcloud/tail/blob/v1.0.0/watch/polling.go#L117
Co-authored-by: Qi Wang <qiwan@redhat.com>
Signed-off-by: jgallucci32 <john.gallucci.iv@gmail.com>
This will allow containers that connect to the network namespace be
able to use the container name directly.
For example you can do something like
podman run -ti --name foobar fedora ping foobar
While we can do this with hostname now, this seems more natural.
Also if another container connects on the network to this container it
can do
podman run --network container:foobar fedora ping foobar
And connect to the original container,without having to discover the name.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow wildcards in the search term. Note that not all registries
support wildcards and it may only work with v1 registries.
Note that searching implies figuring out if the specified search term
includes a registry. If there's not registry detected, the search term
will be used against all configured "unqualified-serach-registries" in
the registries.conf. The parsing logic considers a registry to be the
substring before the first slash `/`.
With these changes we now not only support wildcards but arbitrary
input; ultimately it's up to the registries to decide whether they
support given input or not.
Fixes: bugzilla.redhat.com/show_bug.cgi?id=1846629
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
For using the `registry:2.6` image. 2.7 and beyond dropped the
`htpasswd` binary from the rootfs which parts of our CI depends
on.
While this is not a sustainable solution (assuming `htpasswd` is gone
for ever), it unblocks the CI for now.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently podman run --userns keep-id --user root:root fedora id
The --user flag is ignored. Removing this makes the code work correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We initially believed that implementing this required support for
restarting containers after reboot, but this is not the case.
The unless-stopped restart policy acts identically to the always
restart policy except in cases related to reboot (which we do not
support yet), but it does not require that support for us to
implement it.
Changes themselves are quite simple, we need a new restart policy
constant, we need to remove existing checks that block creation
of containers when unless-stopped was used, and we need to update
the manpages.
Fixes#6508
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When the container uses journald logging, we don't want to
automatically use the same driver for its exec sessions. If we do
we will pollute the journal (particularly in the case of
healthchecks) with large amounts of undesired logs. Instead,
force exec sessions logs to file for now; we can add a log-driver
flag later (we'll probably want to add a `podman logs` command
that reads exec session logs at the same time).
As part of this, add support for the new 'none' logs driver in
Conmon. It will be the default log driver for exec sessions, and
can be optionally selected for containers.
Great thanks to Joe Gooch (mrwizard@dok.org) for adding support
to Conmon for a null log driver, and wiring it in here.
Fixes#6555
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Test has been flaking excessively. A quick look shows that
the test itself is broken, making a bad assumption.
'podman logs -f' is guaranteed to exit when a container
terminates. This does not (and should not) mean that the
container has been cleaned up. It is undefined and unsafe
to run 'podman run -n same-name-as-terminated-container'
immediately after 'podman logs' exits.
Solution: instead of 'podman run', do 'podman inspect'.
This, too, is unsafe, but we can expect to see one of
two possible conditions:
1) command succeeds, in which case we require that
container State.Status be "exited"; or
2) command fails, in which case we expect "no such
container" in error output
For full coverage we should add a small delay-check test
to (1) to ensure that the container is cleaned up after
a short amount of time. Leaving that as a TODO because
it's more than my Go skills can handle, and I want to
get this checked in ASAP to get rid of the flake hassle.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This started as a small fix to `podman inspect` where a container
and image, with the same name/tag, were present, and
`podman inspect` was run on that name. `podman inspect` in 1.9
(and `docker inspect`) will give you the container; in v2.0, we
gave the image. This was an easy fix (just reorder how we check
for image/container).
Unfortunately, in the process of testing this fix, I determined
that we regressed in a different area. When you run inspect on
a number of containers, some of which do not exist,
`podman inspect` should return an array of inspect results for
the objects that exist, then print a number of errors, one for
each object that could not be found. We were bailing after the
first error, and not printing output for the containers that
succeeded. (For reference, this applied to images as well). This
required a much more substantial set of changes to properly
handle - signatures for the inspect functions in ContainerEngine
and ImageEngine, plus the implementations of these interfaces,
plus the actual inspect frontend code needed to be adjusted to
use this.
Fixes#6556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Matthew Heon
OpenShift Merge Robot
Valentin Rothberg
Giuseppe Scrivano
Ed Santiago
Qi Wang
Matthew Heon
jgallucci32
Daniel J Walsh
Jhon Honce
Yuan-Hao Chen
Joseph Gooch