Only between podman-create and -run. (podman-build is too
different). I went with the podman-run version.
Signed-off-by: Ed Santiago <santiago@redhat.com>
--dns-opt and --dns-search, but only in podman-create and -run.
Went with the -run version in both cases; --dns-opt remained
unchanged, but in --dns-search I changed 'and' to 'with'.
Did not consolidate podman-build or podman-pod-create: too
different.
Signed-off-by: Ed Santiago <santiago@redhat.com>
NOTE: This does not edit the use-sigstore-attachments value
in registries.d, similarly to how (podman image trust set) didn't
set the lookaside paths for simple signing.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
podman-logs and podman-pod-logs. Most of these were already
identical, needing no review. Exceptions:
--follow : needed some container/pod tweaking. This is the
only one that really needs careful review.
--names : I went with the longer version
Note that podman-events has --since and --until options too, but
those are too different to be combined here.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This is not an easy one to review, sorry.
I went with the version from podman-create. The differences
against podman-run are subtle: apostrophes, whitespace, and
the arg description in the '####' line. Suggestion for review:
run hack/markdown-preprocess-review, then after you finish
with that, cd /tmp/markdown<TAB>/ipc and use your favorite
two-file diff tool to compare podman-run* against zzz*.
I did not even try to combine the podman-build one; that one
is too different.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Two versions: one for container-related commands, one for pods.
The container one is easy: all versions matched, so I made no
changes.
The pod one is hard to review. I went with the pod-clone
version because the pod-create one looks suspicious: it
talks in terms of containers, not pods. It's possible
that I've got it wrong, and that these two cannot be
combined, so please review very carefully. I strongly
recommend using hack/markdown-preprocess-review for this one.
Signed-off-by: Ed Santiago <santiago@redhat.com>
I chose the version from podman-run because it is the most
up-to-date, and most correct wrt current syntax guidelines.
Differences are in arg description, language, and asterisks.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Allow end users to preprocess default environment variables before
injecting them into container using `--env-merge`
Usage
```
podman run -it --rm --env-merge some=${some}-edit --env-merge
some2=${some2}-edit2 myimage sh
```
Closes: https://github.com/containers/podman/issues/15288
Signed-off-by: Aditya R <arajan@redhat.com>
I chose the version from podman-create. (This is unusual. podman-run
tends to have the better-maintained, more up-to-date version.)
Signed-off-by: Ed Santiago <santiago@redhat.com>
A NOP option. I chose the container word, of course, and the
word 'option' instead of 'flag'. I also hyphenated where needed.
I'm choosing to eliminate the "not on remote" text, because I
don't think it's true: podman-remote happily accepts that
flag on all those commands, including build. (It's marked
as hidden on build, but still accepted).
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only on podman create and run: the --cpus option on container-clone
and pod-clone can probably be combined, but maybe later. pod-create
has unique wording that can't be combined.
This is a freebie to review: the text in both files was already
identical, and I made no changes to it. hack/markdown-preprocess-review
will agree, and show you no diffs, because there are none worth
seeing.
Signed-off-by: Ed Santiago <santiago@redhat.com>
`podman kube play` can create pods and containers from YAML
read from a URL poiniting to a YAML file.
For example: `podman kube play https://example.com/demo.yml`.
`podman kube down` can also teardown pods and containers created
from that YAML file by also reading YAML from a URL, provided the
YAML file the URL points to has not been changed or altered since
it was used to create pods and containers
Closes#14955
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
When using remote podman client, not all transports work as expected. So
document this limitation.
Fixes: containers/podman#15141
Signed-off-by: Tomas Volf <tomas.volf@showmax.com>
When an unsupported limit on cgroups V1 rootless systems
is requested, podman prints an warning message and
ignores the option/flag.
```
Target options/flags:
--cpu-period, --cpu-quota, --cpu-rt-period, --cpu-rt-runtime,
--cpus, --cpu-shares, --cpuset-cpus, --cpuset-mems, --memory,
--memory-reservation, --memory-swap, --memory-swappiness,
--blkio-weight, --device-read-bps, --device-write-bps,
--device-read-iops, --device-write-iops, --blkio-weight-device
```
Related to https://github.com/containers/podman/discussions/10152
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Much like --cidfile (#15414), --pod-id-file has two meanings.
One is used in pod-related commands, one in container ones.
Both meanings read the file, so the read/write split used
in --cidfile is not applicable here.
podman-pod-create keeps its --pod-id-file option because
that one cannot be refactored: that's the only command (now)
that writes a pod-id file.
Reviewable using hack/markdown-preprocess-review but I
did take some liberties with the #### args because they
were wrong. And, since I had to much with the description
text anyway (resulting in diffs), I also took the liberty
of cleaning up a double space.
Signed-off-by: Ed Santiago <santiago@redhat.com>
I've been doing the man-page cleanup distractedly, while
fighting other fires, and submitted some crap:
* #15339: I used single angle brackets, not double
* #15407: I only refactored --cert-dir from some man pages, not all
Easy to review with hack/markdown-preprocess-review, because all the
removed texts are identical. The only diff is that container-certs.d
is now a link.
Sorry about that. I'm going to spend more time being careful.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There are two meanings: one writes a cidfile, the other reads.
Split into two .md files.
This can be reviewed with hack/markdown-preprocess-review .
The main differences you'll see are all in cidfile.read:
1) I use the <<subcommand>> feature. This works nicely for
kill, pause/unpause, and stop. It works less nicely for
rm, because the man page will show "...and rm the container"
(a human might prefer to see "REMOVE the container"). Given
the benefit of this cleanup, I think this is a fine tradeoff.
2) I choose to include the "multiple times" text even on man pages
where it wasn't present before. I tested to make sure it works.
3) The #### line I choose is IMHO the best one.
Minor differences:
* I believe the "remove the container" text in podman-kill
and podman-stop is a copy/paste error. This PR fixes it.
* The only differences between the cidfile.write texts is
the #### line (my version is best) and a final period.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Refactor the --creds option. I went with the one in podman-pull
The main difference between all of them is the '####' line,
differences in the param descriptions. podman-pull had the
clearest one.
This is another one that hack/markdown-preprocess-review is
good for reviewing.
Signed-off-by: Ed Santiago <santiago@redhat.com>
After pulling/creating an image of a foreign platform, Podman will
happily use it when looking it up in the local storage and will not
pull down the image matching the host platform.
As discussed in #12682, the reasoning for it is Docker compatibility and
the fact that user already rely on the behavior. While Podman is now
emitting a warning when an image is in use not matching the local
platform, the documentation was lacking that information.
Fixes: #15300
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
...and, tweak markdown-process-review so it can detect and
remove identical files, making review easier.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Accept a --amend flag in `podman manifest create`, and treat
`--insecure` as we would `--tls-verify=false` in `podman manifest`'s
"add", "create", and "push" subcommands.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Refactor the --authfile option.
My suggestion for review:
1) run hack/markdown-preprocess-review and immediately Ctrl-Q to
quit out of diffuse, which is completely unusable for this
many files; then
2) cd /tmp/markdown-preprocess-review.diffs/authfile
- this is the directory created by the review script
3) rm podman-image-sign* podman-log* podman-search.1.md.in
- because they're essentially identical to podman-create
4) rm podman-manifest-* podman-push.*
- because they're 100% identical to podman-kube-play
5) rm podman-kube-play*
- because it's apart-from-whitespace identical to podman-build
(use "wdiff" to confirm)
6) rm podman-auto-update*
- because that's the one I chose (hence == zzz-chosen.md)
(You should obviously run your own diff/cmp before rm, to confirm
my assertions about which files are identical).
After all that, you have a manageable number of files which
you can scan, read, diff against zzz-chosen.md, even run diffuse.
This option is IMHO the poster child for why we need this kind
of man page refactoring.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Refactor the --annotation option, but only between podman create,
kube play, and run.
This does not include:
* podman build:
- usage is in terms of images, not containers/pods
* manifest add, manifest annotate:
- usage is in terms of images, not containers/pods
- also, wording is slightly different
Signed-off-by: Ed Santiago <santiago@redhat.com>
Smaller, more reviewable chunks.
This is just one option, --arch. Future PRs may, if the reviewing
is easy, include multiple options. This one includes fixes to
the preprocessor script, though:
* big oops, I was not handling '<<something pod|something>>'
where 'pod' appears other than the beginning of the string.
* I was also not handling 'container<<| or pod>>', where one
side was empty.
* Behavior change: <<subcommand>>, on podman-pod-foo,
becomes just 'foo' (not 'pod foo'). This will be useful
in a future PR where we refactor --pod-id-file.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Insisting on “DCO” imposes formalities, that serve self-purpose. One cannot
assume that the submitter has time or will to read texts about symbolism in
software contributions. If the system wants to see the text
nrEAUIEUAIe eanuitdnuae EAIUEAUIAIE »ℓ§444.3.72b)°»°ℓ§euaieauuae
in each commit, people will write this, or any other text, that the system wants to
see. All such text, which presence is mandated by the system, has the same value.
Signed-off-by: Дилян Палаузов <git-dpa@aegee.org>
--cidfile : Read container ID from the specified file and restart the container.
--filter : restart the filtered container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
"podman kube generate" creates Kubernetes YAML from Podman containers,
pods or volumes. Users will still be able to use "podman generate
kube" as an alias of "kube generate".
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
implement new ssh interface into podman
this completely redesigns the entire functionality of podman image scp,
podman system connection add, and podman --remote. All references to golang.org/x/crypto/ssh
have been moved to common as have native ssh/scp execs and the new usage of the sftp package.
this PR adds a global flag, --ssh to podman which has two valid inputs `golang` and `native` where golang is the default.
Users should not notice any difference in their everyday workflows if they continue using the golang option. UNLESS they have been using an improperly verified ssh key, this will now fail. This is because podman was incorrectly using the
ssh callback method to IGNORE the ssh known hosts file which is very insecure and golang tells you not yo use this in production.
The native paths allows for immense flexibility, with a new containers.conf field `SSH_CONFIG` that specifies a specific ssh config file to be used in all operations. Else the users ~/.ssh/config file will be used.
podman --remote currently only uses the golang path, given its deep interconnection with dialing multiple clients and urls.
My goal after this PR is to go back and abstract the idea of podman --remote from golang's dialed clients, as it should not be so intrinsically connected. Overall, this is a v1 of a long process of offering native ssh, and one that covers some good ground with podman system connection add and podman image scp.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Followup to #15174. These are the options that are easy(ish)
to review: those that have only drifted slightly, and need
only minor tweaks to bring back to sanity. For the most part,
I went with the text in podman-run because that was cleaned up
in #5192 way back in 2020. These diffs primarily consist of
using '**' (star star) instead of backticks, plus other
formatting and punctuation changes.
This PR also adds a README in the options dir, and a new
convention: <<container text...|pod text...>> which tries
to do the right thing based on whether the man page name
includes "-pod-" or not. Since that's kind of hairy code,
I've also added a test suite for it.
Finally, since this is impossible to review by normal means,
I'm temporarily committing hack/markdown-preprocess-review,
a script that will diff option-by-option. I will remove it
once we finish this cleanup, but be advised that there are
still 130+ options left to examine, and some of those are
going to be really hard to reunite.
Review script usage: simply run it (you need to have 'diffuse'
installed). It isn't exactly obvious, but it shouldn't take more
than a minute to figure out. The rightmost column (zzz-chosen.md)
is the "winner", the actual content that will be used henceforth.
You really want an ultrawide screen here.
Signed-off-by: Ed Santiago <santiago@redhat.com>
implement a new command `podman generate spec` which can formulate a json specgen to be consumed by both the pod
and container creation API.
supported flags are
--verbose (default true) print output to the terminal
--compact print the json output in a single line format to be piped to the API
--filename put the output in a file
--clone rename the pod/ctr in the spec so it won't conflict w/ an existing entity
Signed-off-by: Charlie Doern <cdoern@redhat.com>
It's a NOP since Podman v2.0 (#5738).
[NO NEW TESTS NEEDED] - does not change behavior.
Fixes: #15185
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
podman-create and -run have many options in common. To date,
these are copy-pasted and haphazardly maintained.
Solution: add an include mechanism, '@@option foo', such
that multiple md source files can fetch from one common file.
This is a Phase One commit, a very small subset of what's
possible. Purpose of this commit is ease of review. If this
passes review, much more (trickier stuff) will be forthcoming.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The "podman kube down" reads in a structured file of
Kubernetes YAML and removes pods based on the Kubernetes kind described in the YAML,
similiar to "podman play kube --down". Users will still be able to use
"podman play kube --down" and "podman kube play --down" to
perform the same function.
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Current directories and files stay the same with the current implementation as long as the tarball does not contain a directories or files with the same name.
Signed-off-by: Felix Stupp <me+github@banananet.work>
- Allow creating sigstore signatures via --sign-by-sigstore-private-key .
Like existing --sign-by, it does not work remote (in this case
because we would have to copy the private key to the server).
- Allow passing a passphrase (which is mandatory for sigstore private keys)
via --sign-passphrase-file; if it is not provided, prompt interactively.
- Also, use that passphrase for --sign-by as well, allowing non-interactive
GPG use. (But --sign-passphrase-file can only be used with _one of_
--sign-by and --sign-by-sigstore-private-key.)
Note that unlike the existing code, (podman build) does not yet
implement sigstore (I'm not sure why it needs to, it seems not to
push images?) because Buildah does not expose the feature yet.
Also, (podman image sign) was not extended to support sigstore.
The test for this follows existing (podman image sign) tests
and doesn't work rootless; that could be improved by exposing
a registries.d override option.
The test for push is getting large; I didn't want to
start yet another registry container, but that would be an
alternative. In the future, Ginkgo's Ordered/BeforeAll
would allow starting a registry once and using it for two
tests.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Also Fix usage of flag "--compression-format" for remote "podman image push". Fix usage of flags "--format", "--remove-signatures" in remote "podman manifest push".
Closes#15109.
Signed-off-by: Romain Geissler <romain.geissler@amadeus.com>
* Document why the default value for --sdnotify is overridden.
Some was included text from
https://github.com/containers/podman/issues/15029#issuecomment-1192244755
* Document that --sdnotify=ignore is overridden.
Fixes#15029
Co-authored-by: Valentin Rothberg <vrothberg@redhat.com>
Co-authored-by: Tom Sweeney <tsweeney@redhat.com>
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
for podman pod create, when we are not sharing any namespaces there is no point for the infra container.
This is especially true since resources have also been decoupled from the container recently.
handle this on the cmd level so that we can still create infra if set explicitly
resolves#15048
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Most network commands/features work with both netavark and CNI. When
we added added netavark most docs were not vetted and thus still use CNI
network, it should just say network.
Fixes#14990
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
added the following flags and handling for podman pod create
--memory-swap
--cpuset-mems
--device-read-bps
--device-write-bps
--blkio-weight
--blkio-weight-device
--cpu-shares
given the new backend for systemd in c/common, all of these can now be exposed to pod create.
most of the heavy lifting (nearly all) is done within c/common. However, some rewiring needed to be done here
as well!
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Update the init container type default to once instead
of always to match k8s behavior.
Add a new annotation that can be used to change the init
ctr type in the kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
--latest : pause/unpause the latest container.
--filter : pause/unpause the filtered container.
--cidfile : Read container ID from the specified file and pause/unpause the container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
podman-remote has a dependency on $(SRCBINDIR), because on
Mac and Windows that's a special dir that may not exist.
But depending on a directory means depending on its mtime,
which changes every time a file in it is updated, which
means running 'make' twice in a row will rebuild podman-remote
for no good reason.
Solution: GNU Make has the concept of "order-only" prerequisites,
precisely for this situation. Use it. Since it's an obscure
feature, document it.
UPDATE: This exposed some nasty duplication wrt podman-remote rules.
Clean those up, and add comments to some confusing sections.
Fixes: #14756
(Also, drive-by edit to remove a stray misdocumented non-option)
Signed-off-by: Ed Santiago <santiago@redhat.com>
[CI:DOCS]
document the podman network create -o=isolate which allows networks to cut themselves off
from external connections.
resolves#5805
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Filter flag is added for podman stop and podman --remote stop. Filtering logic is implemented in
getContainersAndInputByContext(). Start filtering can be manipulated to use this logic as well to limit redundancy.
Signed-off-by: Karthik Elango <kelango@redhat.com>
I added the shorthand option for `podman pull --all-tags`. Like Docker,
Podman can now do `podman pull -a`.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Followup to #14906, in which a nonexistent option was found
in a man page. The xref script was designed to catch that,
but I was too lax in my parsing: the option was documented
using wrong syntax, and the script didn't catch it.
Solution: do not allow *any* unrecognized cruft in the
option description lines. And fix all improperly-written
entries to conform to the rule:
**--option**=*value(s)*
Two asterisks around option, which must have two dashes. One
asterisk around value(s).
This is going to cause headaches for some people adding new
options, but I don't think I can fix that: there are many
factors that make an unparseable line. Adding 'hint' code
would make the script even more complex than it is. I have
to assume that our contributors are smart enough to look
at surrounding context and figure out the right way to
specify options.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The "podman kube play" command is designed to be a replacement for the
"podman play kube" command.
It performs the same function as "play kube" while also still working with the same flags and options.
The "podman play kube" command is still functional as an alias of "kube play".
Closes#12475
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* Correct spelling and typos.
* Improve language.
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
* Reference --uidmap in --gidmap docs for additional information
* Remove --gidmap example "groupname -> 100000 / 30000 -> 0"
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
* Add example "Extracting the list of container registries with a Go template".
(The example was already present but in a much shorter form)
* Add example "Extracting the list of container registries from JSON with jq".
* Add shell completion instructions
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
Make sure that the docs for pull policies is consistent with Buildah and
reflects the implementation.
Further improve the help messages and auto completions.
[NO NEW TESTS NEEDED]
Fixes: #14846
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This addresses:
Symlinks don't work on podman machine on macOS Monterey when using volumes feature #13784
This change does NOT exactly fix the bug, but it does allow the user to
work around it via 'podman init' option, e.g.:
podman machine init -v "$HOME/git:$HOME/git:ro:security_model=none"
If the default security model were to be changed to 'none', then that
would fix the bug, at the possible cost of breaking any use cases that
depend on 'mapped-xattr'.
The documentation of the purpose and behavior of the different security
models seems to be rather light:
https://wiki.qemu.org/Documentation/9psetup#Starting_the_Guest_directly
From testing, it appears that the mapped-xattr security model intends to
manage symlinks such that the guest can see the symlinks but the host
only sees regular files (with extended attributes). As far as I can
tell, this behavior only makes sense when the guest is the only thing
that ever needs to create and read symlinks. Otherwise, symlinks created
on the host are unusable on the guest, and vice versa.
As per the original commit: 8e7eeaa4dd
[NO NEW TESTS NEEDED]
Also document existing ro and rw options.
Also remove misleading statement about /mnt. By my observation, this
line is incorrect. If the intended meaning is different, then I don't
understand.
The default volume is mounted read/write and is not within /mnt.
[core@localhost ~]$ mount | grep 9p
vol0 on /Users/chickey type 9p (rw,relatime,sync,dirsync,access=client,trans=virtio)
Signed-off-by: Corey Hickey <chickey@tagged.com>
add support for the --uts flag in pod create, allowing users to avoid
issues with default values in containers.conf.
uts follows the same format as other namespace flags:
--uts=private (default), --uts=host, --uts=ns:PATH
resolves#13714
Signed-off-by: Charlie Doern <cdoern@redhat.com>
using the new resource backend, implement podman pod create --memory which enables
users to modify memory.max inside of the parent cgroup (the pod), implicitly impacting all
children unless overriden
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Podman Machine crashes if run as root. When creating the machine, we write the ignition so that the UID of the core user matches the UID of the user on the host. We by default, create the root user on the machine with UID 0. If the user on the host is root, the core UID and the Root UID collide, causing a the VM not to boot.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
add two new options to the volume create command: copy and nocopy.
When nocopy is specified, the files from the container image are not
copied up to the volume.
Closes: https://github.com/containers/podman/issues/14722
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Libpod requires that all volumes are stored in the libpod db. Because
volume plugins can be created outside of podman, it will not show all
available plugins. This podman volume reload command allows users to
sync the libpod db with their external volume plugins. All new volumes
from the plugin are also created in the libpod db and when a volume from
the db no longer exists it will be removed if possible.
There are some problems:
- naming conflicts, in this case we only use the first volume we found.
This is not deterministic.
- race conditions, we have no control over the volume plugins. It is
possible that the volumes changed while we run this command.
Fixes#14207
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Replace "setup", "lookup", "cleanup", "backup" with
"set up", "look up", "clean up", "back up"
when used as verbs. Replace also variations of those.
* Improve language in a few places.
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
add the ability to filter networks by their dangling status via:
`network ls --filter dangling=true/false`
Fixes: #14595
Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
expose the --shm-size flag to podman pod create and add proper handling and inheritance
for the option.
resolves#14609
Signed-off-by: Charlie Doern <cdoern@redhat.com>
* Add docs about trailing * functionality in podman-exec.1.md
* Rewrite --env description in podman-create.1.md and podman-run.1.md
* Rewrite the --env examples in podman-create.1.md and podman-run.1.md
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
The manpage for `podman system service` should mention that this
is not safe for external consumption unless you are comfortable
giving anyone who accesses it full root on the system.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This is an enhancement for the podman system prune feature.
In this issue, it is mentioned that 'network prune' should be
wired into 'podman system prune'
https://github.com/containers/podman/issues/8673
Therefore, I add the function to remove unused networks.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
implement podman pod clone, a command to create an exact copy of a pod while changing
certain config elements
current supported flags are:
--name change the pod name
--destroy remove the original pod
--start run the new pod on creation
and all infra-container related flags from podman pod create (namespaces etc)
resolves#12843
Signed-off-by: cdoern <cdoern@redhat.com>
I don't see a reason why we don't support --remove-signatures
from remote push, so adding support.
Fixes: https://github.com/containers/podman/issues/14558
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a new `--overwrite` flag to `podman cp` to allow for overwriting in
case existing users depend on the behavior; they will have a workaround.
By default, the flag is turned off to be compatible with Docker and to
have a more sane behavior.
Fixes: #14420
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Note that the bud-logfile-with-split-logfile-by-platform test is skipped
on the remote client (see #14544).
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
add an option to configure the driver timeout when creating a volume.
The default is 5 seconds but this value is too small for some custom drivers.
Signed-off-by: cdoern <cdoern@redhat.com>
In podman run --help, the message said megabyte, gigabyte, etc. In reality podman takes mebibytes, gibibytes, etc.
[CI:DOCS]
Signed-off-by: Karthik Elango <kelango@redhat.com>
This also unifies the documentation of `--publish` for `podman create`, `podman run`, and `podman pod create`.
Signed-off-by: Daniel Rudolf <github.com@daniel-rudolf.de>
Feature of additional build context added here https://github.com/containers/buildah/pull/3978
already exists on `podman` following PR just enables this feature of
`podman-remote` and `podman on macOS` setups.
Signed-off-by: Aditya R <arajan@redhat.com>
When the volume does not exist we should output an error stating so and
not some generic one.
Fixes#14411
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Forward the ssh exit code to the podman caller. This is useful for
scripts. Use the same logic as podman unshare.
Fixes#14401
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Most of these are no longer relevant, just drop the comments.
Most notable change: allow `podman kill` on paused containers.
Works just fine when I test it.
Signed-off-by: Matthew Heon <mheon@redhat.com>
I am constantly attempting to add the podname to the last
argument to podman pod create. Allowing this makes it match
podman volume create and podman network create.
It does not match podman container create, since podman container create
arguments specify the arguments to run with the container.
Still need to support the --name option for backwards compatibility.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The init binary until now has been bind-mounted to /dev/init which
breaks when bind-mounting to /dev. Instead mount the init to
/run/podman-init. The reasoning for using /run is that it is already
used for other runtime data such as secrets.
Fixes: #14251
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
As part of work done in #14046, fix bugs found in man pages,
basically just moving a few descriptions to the right place
and removing some undesired asterisks.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman system reset did not clean up machines fully, leaving some config
files, and breaking machines. Now it removes all machines files fully.
Signed-off-by: Ashley Cui <acui@redhat.com>
In support of podman machine and its counterpart desktop, we have added
new stats to podman info.
For storage, we have added GraphRootAllocated and GraphRootUsed in
bytes.
For CPUs, we have added user, system, and idle percents based on
/proc/stat.
Fixes: #13876
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
add a new option to completely disable xfs quota usage for a volume.
xfs quota set on a volume, even just for tracking disk usage, can
cause weird errors if the volume is later re-used by a container with
a different quota projid. More specifically, link(2) and rename(2)
might fail with EXDEV if the source file has a projid that is
different from the parent directory.
To prevent such kind of issues, the volume should be created
beforehand with `podman volume create -o o=noquota $ID`
Closes: https://github.com/containers/podman/issues/14049
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Truncate by default to avoid long descriptions from rendering the output
unreadable.
[NO NEW TESTS NEEDED]
Fixes: #14044
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Allow podman machine set to change CPUs, Memory and Disk size of a QEMU machine after its been created.
Disk size can only be increased.
If one setting fails to be changed, the other settings will still be applied.
Signed-off-by: Ashley Cui <acui@redhat.com>
This reverts commit cc3790f332.
We can't change rootful to rootfull because `rootful` is written into the machine config. Changing this will break json unmarshalling, which will break existing machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
Update the documentation for /etc/hosts options --add-host and
--no-hosts. Also make sure that all references use the same text for
consistency.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Ed Santiago
OpenShift Merge Robot
patrycja-guzik
Stefano Figura
Daniel J Walsh
Miloslav Trmač
Aditya R
Niall Crowe
Tomas Volf
Toshiki Sonoda
Valentin Rothberg
Ashley Cui
Nalin Dahyabhai
Дилян Палаузов
Charlie Doern
Karthik Elango
openshift-ci[bot]
Felix Stupp
Romain Geissler
Ewout van Mansom
Erik Sjölund
Paul Holzinger
Urvashi Mohnani
Jake Correnti
Corey Hickey
Giuseppe Scrivano
Carlo Lobrano
Matthew Heon
cdoern
Alexander Scheel
Daniel Rudolf
Cosmin Tupangiu
Brent Baude