As part of this, rework the number of workers used by various
Podman tasks to match original behavior - need an explicit
fallthrough in the switch statement for that block to work as
expected.
Also, trivial change to Podman cleanup to work on initialized
containers - we need to reset to a different state after cleaning
up the OCI runtime.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Ensure when using remote attach --no-stdin a mock device is used to
prevent stdin and not nil. This fixes issue #3009.
When starting a container with the remote client, if the container is
already running and the user asks to attach, we should just attach.
This fixes issue #3011
Signed-off-by: baude <bbaude@redhat.com>
Add a context.Context parameter to Image.GetParent(), Image.IsParent(),
Image.GetChildren(), Image.Remove(), and Runtime.PruneImages().
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
Fixes the ability to run (create,start) a container and attach to its
console correctly. We can now also exit from the console without
hanging the remote client.
Signed-off-by: baude <bbaude@redhat.com>
Also, you can now podman-remote run -it. There are some bugs that need
to be ironed out but I would prefer to merge this so we can make both
progress on start and exec as well as the bugs.
* when doing podman-remote run -it foo /bin/bash, you have to press
enter to get the prompt to display. with the localized podman, we had to
teach it connect to the console first and then start the container so we
did not miss anything.
* when executing "exit" in the console, we get a hard lockup likely
because nobody knows what to do.
* custom detach keys are not supported
* podman-remote run -it alpine ls does not currently work. only
dropping to a shell works.
Signed-off-by: baude <bbaude@redhat.com>
add the ability to create and run containers via the podman-remote
client.
we now create an intermediate layer from the the create/run cli flags.
the intermediate layer can be converted into a createconfig or into a
varlink struct. Once transported, the varlink struct can be converted
back to an intermediate layer and then to a createconfig.
remote terminals are not supported yet.
Signed-off-by: baude <bbaude@redhat.com>
when pulling a non-existent image via varlink, we had a panic because
when we detected a pull error we sent the error over a channel but still
tried to deduce the image id on a nil object.
Fixes: #2860
Signed-off-by: baude <bbaude@redhat.com>
the remote client now can run the diff command to report changes,
modifications, and deletions in an image or container.
Signed-off-by: baude <bbaude@redhat.com>
Add `digest` field to Image struct and update API.md
Show image digests when using --digests in podman-remote.
```
$ PODMAN_VARLINK_ADDRESS="tcp:127.0.0.1:1234" sudo bin/podman-remote images --digests
REPOSITORY TAG DIGEST IMAGE ID CREATED SIZE
docker.io/library/alpine latest sha256:d05ecd4520cab5d9e5d877595fb0532aadcd6c90f4bbc837bc11679f704c4c82 5cb3aa00f899 2 weeks ago 5.79 MB
docker.io/library/busybox latest sha256:4415a904b1aca178c2450fd54928ab362825e863c0ad5452fd020e92f7a6a47e d8233ab899d4 5 weeks ago 1.42 MB
```
Signed-off-by: Qi Wang <qiwan@redhat.com>
We have a very high performance JSON library that doesn't need to
perform code generation. Let's use it instead of our questionably
performant, reflection-dependent deep copy library.
Most changes because some functions can now return errors.
Also converts cmd/podman to use jsoniter, instead of pkg/json,
for increased performance.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
on the remote client, if a user wants to know the rootfs size of a
container, a -s should be passed. this corrects a behavior where size
was shown by default.
Fixes#2765
Signed-off-by: baude <bbaude@redhat.com>
We have a new event for container 'Exited' which has been renamed to
'died'.
also removed the stream bool from the varlink endpoint for events
because it can be determined by the varlink more value.
Signed-off-by: baude <bbaude@redhat.com>
add the ability for users to specify more than one container at a time
while using podman logs. If more than one container is being displayed,
podman will also prepend a shortened container id of the container on
the log line.
also, enabled the podman-remote logs command during the refactoring of
the above ability.
fixes issue #2219
Signed-off-by: baude <bbaude@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
this is the final enablement for the pod subcommand. it includes the
ability to run podman-remote pod top and stats.
Signed-off-by: baude <bbaude@redhat.com>
* Clean up adapter code
* Add GetContainersByContext to Varlink API
* Add missing comments
* Restore save command
* Restore error type mapping when using varlink
Signed-off-by: Jhon Honce <jhonce@redhat.com>
the remote-client is currently weak for carrying error messages
over the varlink interface and displaying something useful to users
and developers for the purposes of debug. this is a starting point
to improve that user experience.
Signed-off-by: baude <bbaude@redhat.com>
enable the remote client to be able to inspect a pod. also, bonus of
enabling the podman pod exists command which returns a 0 or 1 depending
on whether the given pod exists.
Signed-off-by: baude <bbaude@redhat.com>
Also add some argument checks to the Varlink function to avoid
referencing nil pointers, and complement the API.md descriptions.
The varlink endpoint can be tested via varlink CLI:
$ varlink call -m unix:/run/podman/io.podman/io.podman.SearchImages \
'{"query": "ruby", "limit": 0, "tlsVerify": false, "filter": {}}'
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Refactor the image-search logic from cmd/podman/search.go to
libpod/image/search.go and update podman-search and the Varlink API to
use it.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Prior, a pod would have to be started immediately when created, leading to confusion about what a pod state should be immediately after creation. The problem was podman run --pod ... would error out if the infra container wasn't started (as it is a dependency). Fix this by allowing for recursive start, where each of the container's dependencies are started prior to the new container. This is only applied to the case where a new container is attached to a pod.
Also rework container_api Start, StartAndAttach, and Init functions, as there was some duplicated code, which made addressing the problem easier to fix.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Cockpit team wants to list the registry name where the image was
found.
Also fix up SearchImages code to check if the user specified a registry
in his call to use that rather then all the registries, This matches
podman search command.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Cockpit wants to be able to search images on systems without
tlsverify turned on.
tlsverify should be an optional parameter, if not set then we default
to the system defaults defined in /etc/containers/registries.conf.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
iFix builtin volumes to work with podman volume
Currently builtin volumes are not recored in podman volumes when
they are created automatically. This patch fixes this.
Remove container volumes when requested
Currently the --volume option on podman remove does nothing.
This will implement the changes needed to remove the volumes
if the user requests it.
When removing a volume make sure that no container uses the volume.
Signed-off-by: Daniel J Walsh dwalsh@redhat.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
allow users to remotely prune volumes.
this is the last volume command for remote enablement. as such,
the volume commands are being folded back into main because they
are supported for both local and remote clients.
also, enable all volume tests that do not use containers
as containers are not enabled for the remote client yet.
Signed-off-by: baude <bbaude@redhat.com>
add the ability to build images using files local to the remote-client
but over a varlink interface to a "remote" server.
Signed-off-by: baude <bbaude@redhat.com>
enable podman-remote push so that users can push images from a
remote client.
change in push API to deal with the need to see output over the
varlink connection.
Signed-off-by: baude <bbaude@redhat.com>
Image more clearly describes what the type represents.
Also, only include the image name in the `ImageNotFound` error returned
by `GetImage()`, not the full error message.
Signed-off-by: Lars Karlitski <lars@karlitski.net>
This is more consistent and eaiser to parse than the format that
golang's time.String() returns.
Fixes#2260
Signed-off-by: Lars Karlitski <lars@karlitski.net>
There are other ways for developers to "ensure their varlink setup is
working", for example by calling `GetVersion()` or any call on the
org.varlink.service interface.
Signed-off-by: Lars Karlitski <lars@karlitski.net>
Remove the `NotImplemented` type and comment out the methods that use
it. This way we can keep track of the methods that still need to be
implemented without committing them to stable API.
Signed-off-by: Lars Karlitski <lars@karlitski.net>
We intend to migrate to the cobra cli from urfave/cli because the
project is more well maintained. There are also some technical reasons
as well which extend into our remote client work.
Signed-off-by: baude <bbaude@redhat.com>
Currently handlin memory via varlink is hard coded to 0
Changing to
Memory: create.Resources.Memory,
MemoryReservation: create.Resources.Memory_reservation,
MemorySwap: create.Resources.Memory_swap,
MemorySwappiness: int(create.Resources.Memory_swappiness),
KernelMemory: create.Resources.Kernel_memory,
Allows callers to modify these memory settings.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
addition of import and export for the podman-remote client. This includes
the ability to send and receive files between the remote-client and the
"podman" host using an upgraded varlink connection.
Signed-off-by: baude <bbaude@redhat.com>
The toolbox project would benefit from a few changes to more closely
resembe the original atomic cli project. Changes made are:
* only pull image for container runlabel if the label exists in the image
* if a container image does not have the desired label, exit with non-zero
Signed-off-by: baude <bbaude@redhat.com>
we now, by default, only prune dangling images. if --all is passed, we
prune dangling images AND images that do not have an associated containers.
also went ahead and enabled the podman-remote image prune side of things.
Fixes: #2192
Signed-off-by: baude <bbaude@redhat.com>
We want to return a map of containermounts where the key is container
id and it points to the mountpath.
Issue #2215
Signed-off-by: baude <bbaude@redhat.com>
initial enablement of podman-remote version. includes add a APIVersion const
that will allow us to check compatibility between host/client when connections
are made.
also added client related information to podman info.
Signed-off-by: baude <bbaude@redhat.com>
when defining containers, we missed the conditional logic to allow
the container to be defined with "WithPod" and so forth. I had to
slightly modify the createcontainer process to pass a libpod.Pod
that could override things; use nil as no pod.
Signed-off-by: baude <bbaude@redhat.com>
Avoid generating
quay.io/openshift-release-dev/ocp-release@sha256@sha256:239... and
similar when the image name is already digest-based [1]. It's not
clear exactly how we get into this state, but as shown by the unit
tests, the new code handles this case correctly (while the previous
code does not).
[1]: https://github.com/containers/libpod/issues/2086
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #2106
Approved by: rhatdan
Add the ability to build a remote client in golang that uses all
the same front-end cli code and output code. The initial limitations
here are that it can only be a local client while the bridge and
resolver code is being written for the golang varlink client.
Tests and docs will be added in subsequent PRs.
Signed-off-by: baude <bbaude@redhat.com>
Going through and adding options (like tls-verify, signature option, etc)
to some varlink endpoints (like push/pull) many of which had not been
updated since their original authoring.
Signed-off-by: baude <bbaude@redhat.com>
like podman stop of containers, we should allow the user to specify
a timeout override when stopping pods; otherwise they have to wait
the full timeout time specified during the pod/container creation.
Signed-off-by: baude <bbaude@redhat.com>
DockerRegistryOptions.DockerInsecureSkipTLSVerify as an types.OptionalBool
can now represent that value, so forceSecure is redundant.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
DockerRegistryOptions.DockerInsecureSkipTLSVerify as an types.OptionalBool
can now represent that value, so forceSecure is redundant.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Following SystemContext.DockerInsecureSkipTLSVerify, make the
DockerRegistryOne also an OptionalBool, and update callers.
Explicitly document that --tls-verify=true and --tls-verify unset
have different behavior in those commands where the behavior changed
(or where it hasn't changed but the documentation needed updating).
Also make the --tls-verify man page sections a tiny bit more consistent
throughout.
This is a minimal fix, without changing the existing "--tls-verify=true"
paths nor existing manual insecure registry lookups.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Not just nil.
Addressing:
pkg/varlinkapi/images.go:273:15⚠️ ineffectual assignment to err (ineffassign)
Signed-off-by: Šimon Lukašík <slukasik@redhat.com>
It was setting the wrong variable (CamelCase)
in the wrong module ("main", not "libpod")...
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
To work better with Kata containers, we need to delete() from the
OCI runtime as a part of cleanup, to ensure resources aren't
retained longer than they need to be.
To enable this, we need to add a new state to containers,
ContainerStateExited. Containers transition from
ContainerStateStopped to ContainerStateExited via cleanupRuntime
which is invoked as part of cleanup(). A container in the Exited
state is identical to Stopped, except it has been removed from
the OCI runtime and thus will be handled differently when
initializing the container.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
* Update varlink document
* Add NoContainersInPod error in go and python
* Add support for varlink pod interface
* New code passes pylint
* Fix bug in test_runner.sh
* Update integration tests for race condition on status check
* Add missing port config file support
Signed-off-by: Jhon Honce <jhonce@redhat.com>
For the sake of debug and problem reporting, we would benefit from knowing
what buildah version was vendored into podman. Also, knowing the distribution
and distribution version would also be handy.
Signed-off-by: baude <bbaude@redhat.com>
We added a timeout for convenience, but most invocations don't
care about it. Refactor it into WaitWithTimeout() and add a
Wait() that doesn't require a timeout and uses the default.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1527
Approved by: mheon
Matthew Heon