Support two new wait conditions, "healthy" and "unhealthy". This
further paves the way for integrating sdnotify with health checks which
is currently being tracked in #6160.
Fixes: #13627
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
While reading the code I found the man page to be lacking some
information that I found worth mentioning and clarifying.
In particular, how the command behaves with respect to exit codes and
when more than one condition is specified.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add support for `--imagestore` in podman which allows users to split the filesystem of containers vs image store, imagestore if configured will pull images in image storage instead of the graphRoot while keeping the other parts still in the originally configured graphRoot.
This is an implementation of
https://github.com/containers/storage/pull/1549 in podman.
Signed-off-by: Aditya R <arajan@redhat.com>
The backend allows for any start/end ip in the subnet. There is no
reason to limit the cli to only CIDR subnets. This allows for much more
flexibility.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
- [service_destinations] should be [engine.service_destinations]
- service_destinations does not read from
`/usr/share/containers/containers.conf` because podman uses config.ReadCustomConfig().
Fixes: #15615
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
This commit creates a new command `podmansh` command which can be used by
administrators to provide a confined shell to their users.
The user will only have access to the volumes and capabilities for that
user.
Co-authored-by: Paul Holzinger <pholzing@redhat.com>
Co-authored-by: Daniel Walsh <dwalsh@redhat.com>
Co-authored-by: Petr Lautrbach <lautrbach@redhat.com>
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
Remote clients only support the docker transport which is mentioned in
the destination table below. So drop the redundant text on supported
transports from the main description to avoid confusion.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
podman info prints the network information about binary path,
package version, program version and DNS information.
Fixes: #18443
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
One feature needed for podmansh is the ability to set the default
homedir to be the workingdir when you login.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add routes using the --route flag.
the no_default_route option in --opt prevents a default route from
getting added automatically.
Signed-off-by: Jan Hendrik Farr <github@jfarr.cc>
The Sysctl=name=value entry can be used to set --sysctl=name=value
directly without the need to use PodmanArgs=--sysctl=name=value.
Signed-off-by: Laurenz Kruty <git@laurenzkruty.de>
For filter=id=XXX (containers, pods) and =ctr-ids=XXX (pods):
if XXX is only hex characters, treat it as a PREFIX
otherwise, treat it as a REGEX
Add tests. Update documentation. And fix an incorrect help message.
Fixes: #18471
Signed-off-by: Ed Santiago <santiago@redhat.com>
Short description in man pages:
* Use imperative form
Command help (cobra.Command.Short):
* Capitalize first letter
* Use imperative form
* Remove ending full stop when the short description
only contains one sentence without any commas
Command help (cobra.Command.Long):
* Capitalize first letter unless the sentence starts
with a command "podman command ..."
* Use imperative form when the long description is
identical or almost identical to the short description.
This modification was only done in a few places.
Command tables:
* Use imperative form in the "Description" column
[NO NEW TESTS NEEDED]
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
Work around a go-md2man bug, and add a check script to make sure
this doesn't hit us again.
Background: go-md2man can't deal with a left-hand column > 31 chars.
It produces man pages that look like:
| Something With >31 Character | |
| | ..description |
(should be all on one row). It also has trouble when the vertical
bars are misaligned: it completely removes the right-hand side.
There's almost certainly a better solution: fix go-md2man, or
use a different conversion tool, or maybe even pre/postprocess.
But this is a quick interim solution.
Sorry for the perl. This could be done in bash/sed/awk/grep,
but not with any sort of sane error messages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add a new field `ExitCodePropagation` field to allow for configuring the
newly added functionality of controlling how the main PID of a kube
service exits.
Jira: issues.redhat.com/browse/RUN-1776
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Implement means for reflecting failed containers (i.e., those having
exited non-zero) to better integrate `kube play` with systemd. The
idea is to have the main PID of `kube play` exit non-zero in a
configurable way such that systemd's restart policies can kick in.
When using the default sdnotify-notify policy, the service container
acts as the main PID to further reduce the resource footprint. In that
case, before stopping the service container, Podman will lookup the exit
codes of all non-infra containers. The service will then behave
according to the following three exit-code policies:
- `none`: exit 0 and ignore containers (default)
- `any`: exit non-zero if _any_ container did
- `all`: exit non-zero if _all_ containers did
The upper values can be passed via a hidden `kube play
--service-exit-code-propagation` flag which can be used by tests and
later on by Quadlet.
In case Podman acts as the main PID (i.e., when at least one container
runs with an sdnotify-policy other than "ignore"), Podman will continue
to wait for the service container to exit and reflect its exit code.
Note that this commit also fixes a long-standing annoyance of the
service container exiting non-zero. The underlying issue was that the
service container had been stopped with SIGKILL instead of SIGTERM and
hence exited non-zero. Fixing that was a prerequisite for the exit-code
propagation to work but also improves the integration of `kube play`
with systemd and hence Quadlet with systemd.
Jira: issues.redhat.com/browse/RUN-1776
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure to look for the container's exit code when it's in stopped
state. With `--restart=always`, the container seems to stay in the
stopped state which led the wait logic to loop until the 20 seconds
timeout for the cleanup process to have finished kicks in.
Also defensively make sure to loop when the container is in stopped
state but no exit code has been written yet.
Add a regression test to make sure Podman doesn't wait more than 20
seconds. Even on a CI machine under high load I expect it to take much
much much less than that, so I do not expect this test to flake in the
future.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
the combination --pod and --userns is already blocked. Ignore the
PODMAN_USERNS variable when a pod is used, since it would cause to
create a new user namespace for the container.
Ideally a container should be able to do that, but its user namespace
must be a child of the pod user namespace, not a sibling. Since
nested user namespaces are not allowed in the OCI runtime specs,
disallow this case, since the end result is just confusing for the
user.
Closes: https://github.com/containers/podman/issues/18580
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
'make docs' has been spitting out these warnings:
WARNING: go-md2man does not handle node type HTMLSpan
Warnings suck, they cost us important time and attention.
This warning is always caused by left-angle-brackets in markdown
but they are very hard to find. I've found them and fixed them.
Warnings are now gone.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When no name arg is given to Podman machine commands, Podman assumes the machine name is podman-machine-default. Document this behavior.
Signed-off-by: Ashley Cui <acui@redhat.com>
The `--network-cmd-path` CLI option only affects rootless networks using `slirp4netns(1)`, not `pasta(1)`. Following #18568 Podman should rather use the more generic `r.config.FindHelperBinary()` method (and therefore honour the `helper_binaries_dir` config) to find the path to the `slirp4netns` binary and deprecate the misleading `--network-cmd-path` CLI option. However, since this wasn't implemented yet we can't deprecate `--network-cmd-path` as of now. Adding a note anyway.
Fixes#18560
Signed-off-by: Daniel Rudolf <github.com@daniel-rudolf.de>
Read the entire YAML file in case of a multi-doc file
Adjust the unit test
Add a system test
Add comment in the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
If there's a container defined in multiple directories use the following
precedence:
$XDG_CONFIG_HOME/containers/systemd/ or ~/.config/containers/systemd/
takes precedence over /etc/containers/systemd/users/$(UID) and this
takes precedence over /etc/containers/systemd/users/
Signed-off-by: Petr Lautrbach <lautrbach@redhat.com>
I would like to allow admin to control quadlet containers
in users homedirs.
If an admin sets a quadlet in
/etc/containers/systemd/users, then all users will run these
quadlet services when they login.
If an admin places a quadlet in /etc/containers/systemd/users/$(USERNAME)
then only the USERNAME will execute this quadlet service when
they login.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add Restarts column to the podman pod ps output to show the total number
of times the containers in a pod were restarted. This is the same as the
restarts column displayed by kubernetes with kubectl get pods. This will
only be displayed when --format={{.Restarts}}.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add Restarts column to the podman ps output to show how many times a
container was restarted based on its restart policy. This column will be
displayed when --format={{.Restarts}}.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add --restart flag to pod create to allow users to set the
restart policy for the pod, which applies to all the containers
in the pod. This reuses the restart policy already there for
containers and has the same restart policy options.
Add "never" to the restart policy options to match k8s syntax.
It is a synonym for "no" and does the exact same thing where the
containers are not restarted once exited.
Only the containers that have exited will be restarted based on the
restart policy, running containers will not be restarted when an exited
container is restarted in the same pod (same as is done in k8s).
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Systemd supports unit files with a prefix '-' which
tells the system to check if the content exists before
using it. This would allow the QM project to specify
AddDevice=-/dev/kvm, which would add the /dev/kvm device
to the container iff it exists on the host.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Found a typo today while reading documentation.
Simple enough change :-)
Signed-off-by: Mike Eisemann <me@michaeleisemann.com>
Signed-off-by: AndroidKitKat <me@michaeleisemann.com>
system reset it says it will delete containers, images, networks, etc...
However it will also delete the graphRoot and runRoot directories.
Normally this is not an issue, however in same cases these directories
were set to the users home directory or some other important system
directory.
As first step simply show the directories that are configured and thus
will be deleted by reset. As future step we could implement some
safeguard will will not delete some known important directories however
I tried to keep it simple for now.
[NO NEW TESTS NEEDED]
see #18349 and #18295
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Highlight that existing user and system services may be overridden if
they have same name as the Quadlet file. Also point the user to
systemctl and how to list existing files.
Closes: #18275
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Wire in support for writing the digest of the pushed image to a
user-specified file. Requires some massaging of _internal_ APIs
and the extension of the push endpoint to integrate the raw manifest
(i.e., in bytes) in the stream.
Closes: #18216
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Update e2e tests not to expect the flag
System tests - explicitly set the log driver to be able to parse the output
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Commands like podman-create(1), podman-run(1), podman-inspect(1),
podman-ps(1) will emit formatted output upon success. This allows
the output from commands to be emitted directly to a file and
can supersede the --noout parameter by using /dev/null. An issue
with --noout was also remedied.
This closes issue #18120.
Signed-off-by: Ali Rizvi-Santiago <arizvisa@gmail.com>
- add information about netavark plugins
- add missing arguments to options the require an arg
- document that container dns is only supported with bridge
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow users to customize the network_interface option is the network
config. For bridge this allows users to change the bridge name and for
maclvan it will be the same as `--opt parent=...`.
However the main reason for this option is to allow netavark plugins to
make use of it. I demoed the host-device plugin which makes use of this
as an example. While we could let users set them via --opt it is more
natural to just use the field which is designed for that purpose.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bump containers/(storage, common, buildah and image)
Changes since 2023-01-01:
- skip mount-cache-selinux-long-name test under remote, with
a FIXME requesting that someone see if it can be made to work.
- skip six tests that fail under rootless-remote
- add new --build-arg-file option:
- update man page
Squash of:
* cf56eb1865
* 561f082772
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Aditya R <arajan@redhat.com>
The `UserNS` key will replace the `RemapGid`, `RemapUid`, `RemapUidSize`
and `RemapUsers` options which are therefore marked as deprecated by
this commit.
Closes#17984
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
...mostly just test code that wasn't doing the required waits.
My first approach in the kube-play test was to add "--wait".
Bit mistake! The --wait flag, counterintuitively and counter to
documentation, actually destroys all pods+containers+everything
on exit. (Or tries -- see #17803). Since this violates POLA
and is undocumented, I include here a fix to the man page.
Despite my best intentions, I can't reasonably check every single
test for missing waits, especially in kube-play where failing
containers will get retried forever so we can't wait. We'll
just have to fix flakes as we see them.
Fixes: #17958Fixes: #18071
Signed-off-by: Ed Santiago <santiago@redhat.com>
Mention that specified credentials are only used to authenticate against
target registries (e.g., during `pull` or `build`) and are not used to
authenticat against mirrors etc.
Closes: #17185
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This commit adds an quadlet option `Tmpfs` which can be used to mount a
tmpfs in the container.
Closes#17907
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Add the command along with the abi and tunnel support
Add e2e tests
Add man page
Add apiv2 test to ensure return codes
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
The podman kube generate command can now generate a
Deployment kind when the --ype flag is set to deployment.
By default, a Pod spec will be generated if --type flag is
not set.
Add --replicas flag to kube generate to allow users to set
the value of replicas in the generated yaml when generating a
Deployment kind.
Add e2e and minikube tests for this feature.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Fix the example for RemapGid from keep-id to keep-groups
Reflect the chnages to the support for keep-id in Containers as well
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
If the volume source starts with . resolve the path relative to the
location of the unit file
Update the test code to allow verification of regex for the value in key
value arguments
Add the usage of relative paths to the volume and mount test cases
Update the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
When we searching any image at a container registry,
--cert-dir and --creds could be required
as well as push, pull, etc.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
The --stream flag is being used extensively in the tests and some blog
posts refer to it which has been causing some confusion on why the flag
was hidden. I do not see a good reason to hide it anymore, so unhide it
and add some docs.
[NO NEW TESTS NEEDED] as it's already being tested.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Currently Podman prevents SELinux container separation,
when running within a container. This PR adds a new
--security-opt label=nested
When setting this option, Podman unmasks and mountsi
/sys/fs/selinux into the containers making /sys/fs/selinux
fully exposed. Secondly Podman sets the attribute
run.oci.mount_context_type=rootcontext
This attribute tells crun to mount volumes with rootcontext=MOUNTLABEL
as opposed to context=MOUNTLABEL.
With these two settings Podman inside the container is allowed to set
its own SELinux labels on tmpfs file systems mounted into its parents
container, while still being confined by SELinux. Thus you can have
nested SELinux labeling inside of a container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a way to keep play kube running in the foreground and terminating all pods
after receiving a a SIGINT or SIGTERM signal. The pods will also be
cleaned up after the containers in it have exited.
If an error occurrs during kube play, any resources created till the
error point will be cleane up also.
Add tests for the various scenarios.
Fixes#14522
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Handle the Mount key
Reuse code from the handling of the Volume key
Add E2E Test
E2E Test - Add checker for KeyValue string
Update man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Change podman to Podman
Add a period at the end of all sentences
Co-authored-by: Valentin Rothberg <vrothberg@redhat.com>
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Add a note about the restriction of the use of
thre back-ticks in the md files in the options directory.
If this is not done properly, it can quietly corrupt
the compliled man pages.
[NO NEW TESTS NEEDED]
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
Support auto updating containers running inside pods. Similar to
containers, the systemd units need to be generated via
`podman-generate-systemd --new $POD` to generate the pod's units.
Note that auto updating a container inside a pod will restart the entire
pod. Updates of multiple containers inside a pod are batched, such that
a pod is restarted at most once. That is effectively the same mechanism
for auto updating containers in a K8s YAML via the `podman-kube@`
template or via Quadlet.
Updating a single container unit without restarting the entire pod is
not possible. The reasoning behind is that pods are created with
--exit-policy=stop which will render the pod to be stopped when auto
updating the only container inside the pod. The (reverse) dependencies
between the pod and its containers unit have been carefully selected for
robustness. Changes may entail undesired side effects or backward
incompatibilities that I am not comfortable with.
Fixes: #17181
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Somehow the options/secret.md file generated corrupt md which
then generated corrupt .man files. Fix, and add a Makefile
check to prevent this from happening again.
Signed-off-by: Ed Santiago <santiago@redhat.com>
we were previously using an experimental feature in crun, but we lost
this capability once we moved to using the OCI runtime spec to specify
the volume mappings in fdcc2257df.
Add the same feature to libpod, so that we can support relative
positions for the idmaps.
Closes: https://github.com/containers/podman/issues/17517
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Podman machine os apply takes a takes a OCI image with container native ostree functionality and rebases the machine os on that image.
Currently, this requires the guest os inside the vm to use rpm-ostree.
When specifying an image, any container transport may be specified. If a
container transport is not specified, OS apply will attempt to search
the local containers-storage for the image, and if it is not found, it
will then attempt to use the Docker transport to pull from a remote
registry.
The architecture of OS apply is as follows:
podman machine os apply ssh's into the machine and calls podman machine os
apply. on the secondary call to podman machine os apply, apply
recognizes that it is inside the machine and does image operations, and
finally calls rpm-ostree rebase.
Tests are written but commented out, due to the chicken-and-egg problem.
Signed-off-by: Ashley Cui <acui@redhat.com>
Followup to #17486: stricter checks on --format.
* If a subcommand offers autocompletion for templates,
it must also offer a '--format json' option.
* If a subcommand has a --format option that DOES NOT
offer autocompletion for templates, it must be listed
in a hardcoded grandparented-in table of commands
where that's not applicable. (Mostly commands
like build, commit, save, where "format" is used
in the context of "oci/docker").
Only likely to trigger on PRs which add new subcommands,
and is intended to catch oversights.
Also, test for alphanumeric order in man page tables.
Sort all existing tables.
Signed-off-by: Ed Santiago <santiago@redhat.com>
* add tests
* add documentation for --shm-size-systemd
* add support for both pod and standalone run
Signed-off-by: danishprakash <danish.prakash@suse.com>
command tables are chock full of duplication, hence they break.
Look for inconsistencies between the displayed man page name
and the actual man page name:
| foo | [podman-foo(1)](podman-cmd-foo.1.md) | ...
^^^
Inspired by #17474.
We can't actually check the subcommand name (the plain "foo")
because there are many existing subcommands whose name does
not match the man page: rmi vs image-rm, list vs podman-ps.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Very belated successor to #14046.
I don't know why this is so important to me. Probably because we're
doing a halfhearted sloppy job of documenting, and new options get
added, and not documented, and that's just wrong.
I've given up on documenting internal structs. This iteration
has a $Format_Exceptions table defined at the top of the xref
script, enumerating a hardcoded defined set of podman commands
and fields that should remain undocumented.
This iteration also forgives completely-undocumented formats.
If podman-foo has a --format, but podman-foo.1.md does not
list *any* valid fields, the script warns but does not fail.
This at least is better than documenting a random mix of fields.
This version of the xref script is much slower: 10s vs 4. I
think we can live with that in a CI-only script.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Document the identifiers used in the journald events backend. Those can
be used to filter Podman events with journalctl and I need them to be
documented for a blog I am writing at the moment.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
- Don't order the container unit before local-fs.target as that creates
an ordering cycle that triggers other issues.
- Use the example network in the container unit
- Only use groups that exists by default for the volume
Signed-off-by: Timothée Ravier <tim@siosm.fr>
Add support for disabeling SELinux process separation in the container.
Add support for setting the process type of the container.
Add support for setting the process MCS level of the container.
Add support for setting the file type of the container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently we are shipping no data about quadlet, since the
podman-systemd.unit file is not shipped. Also want to add the
quadlet name to the description of the man page so that
man -k quadlet
will help users find the man page.
Also add a link file such that if the user types in
man quadlet
man will show the podman-systemd.unit file.
Also eliminate the subpackage podman-quadlet
Fixes: https://github.com/containers/podman/issues/17349
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
copy the current mapping into a new user namespace, and run into a
separate user namespace.
Closes: https://github.com/containers/podman/issues/17337
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When multiple files are specified buildah considers `FROM` instruction
from the last file specified and so does `buildkit` and `docker` so lets
specify that in docs.
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Similar to: https://github.com/containers/buildah/pull/4546
Signed-off-by: Aditya R <arajan@redhat.com>
issues.redhat.com/browse/RHELBU-1918 is mentioning the podman-events man
page which are lacking notes on the verbose create events added by
commit 71f92d263c.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
(podman push) and (podman manifest push) now support --sign-by-sigstore=param-file,
using the containers-sigstore-signing-params.yaml(5) file format.
That notably adds support for Fulcio and Rekor signing.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
We had a number of references, mostly in docs, to the word master that
can now be changed to main. This PR does that and makes the project a
bit more inclusive.
[NO NEW TESTS NEEDED]
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
The Device, Type, Copy and Options keys are now supported in
quadlet .volume files. This allows users to create filesystem
based volumes with quadlets .volume files.
Signed-off-by: Ingo Becker <ingo@orgizm.net>
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Where the terms CNI and cni are used in documentation like man pages,
readme's, and tutorials, we have begun to add deprecation notices where
applicable. In cases where netavark cannot do what CNI can, those have
been left alone.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Reserved annotations are used internally by Podman and would effect
nothing when run with Kubernetes so we should not be generating these
annotations.
Fixes: https://github.com/containers/podman/issues/17105
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Users need to know about this side effect.
Fixes: 5a2405ae1b ("Don't mount /dev/tty* inside privileged...")
Fixes: f4c81b0aa5 ("Only prevent VTs to be mounted inside ...")
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Move the handling of Publish key to a method
use --publish instead of -p
Use the new method for both .container and .kube files
Adjust .container tests
Add .kube tests
Update the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Add a new flag --publish
Remote - Pass PublishPorts as a string array
ABI - translate the string array to Ports and merge with the ports in the spec
Add e2e tests
Add option to man doc
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
The man-page cross-reference script checks the SEE ALSO section
to confirm that all references are to existing man pages (#12258).
However, it's a little too forgiving: it allows aliases, the
short '.so' files under the 'links/' subdirectory. That means
we could link to non-default command names, and were doing so.
As of this PR, we no longer allow that. Any podman command
referenced in SEE ALSO must be the canonical command name
(and man page). Fix existing non-canonical names, and
remove the exception so we don't allow this again.
See #16848 for discussion of context.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the new keys to the supported keys list for the Container group
Pass the list of EnvironmentFile values while maintaining the order
Quadlet e2e test framework: Add support for checking regex in Podman args
Add relevant tests
Update man
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Added the functionality for a user to update the PIDs limit for a
container.
Fixes: #16543
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Users are surprised when chowning large volumes how long it can take
to relabel of chown the entire directory tree. This PR updates the
documentation to explain this fact to the user.
Fixes: https://github.com/containers/podman/issues/16575
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
False is the assumed value, and inspect and podman generate kube are
being cluttered with a ton of annotations that indicate nothing.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Support .network file to create a systemd service that runs podman network create
Support networks with .network suffix in Container and Kube to link with Quadlet created networks
Add E2E Tests
Add man doc
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
In the recent past, I met the frequent need to wait for a container to
exist that, at the same time, may get removed (e.g., system tests in [1]).
Add an `--ignore` option to podman-wait which will ignore errors when a
specified container is missing and mark its exit code as -1. Also
remove ID fields from the WaitReport. It is actually not used by
callers and removing it makes the code simpler and faster.
Once merged, we can go over the tests and simplify them.
[1] github.com/containers/podman/pull/16852
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Also update vendor of containers/storage and image
Cleanup display of added/dropped capabilties as well
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add --ignore flag to the command line
Add a new parameter to the NetworkCreate interface in pkg/domain for CreateOptions
Add a new API Network CreateWithOptions in pkg/bindings
Remote API - Add a query parameter to set the ignore flag
Kube - use the IgnoreIfExists flag when creating the default network instead of handling the failure
Add e2e tests
Update man page for podman-network-create
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
On Mac machines security model none works, while "mapped-xattr"
causes symlinks to not work.
Update docs/source/markdown/podman-machine-init.1.md
[NO NEW TESTS NEEDED]
Related: https://github.com/containers/podman/discussions/16102
Co-authored-by: Tom Sweeney <tsweeney@redhat.com>
Signed-off-by: Sorin Sbarnea <sorin.sbarnea@gmail.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Now that the OCI runtime specs have support for idmapped mounts, let's
use them instead of relying on the custom annotation in crun.
Also add the mechanism to specify the mapping to use. Pick the same
format used by crun so it won't be a breaking change for users that
are already using it.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Just like podman-remote run users should still be able to set volumes,
of course the source must be on the server machine but this is already
the case for podman machine for example.
Fixes#16694
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The remote client should be allowed to specify if the container should
be run with the proxy env vars. It will still use the proxy vars from
the server process and not the client. This makes podman-remote more
consistent with the local version and easier to use in environments
where a proxy is required.
Fixes#16520
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This changes references to `/etc/containers/storage.conf` (and similar) to
links to `containers-storage.conf(5)`, as there are alternative locations
for this file.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This just calls GC on the local storage, which will remove any leftover
directories from previous containers that are not in the podman db anymore.
This is useful primarily for transient store mode, but can also help in
the case of an unclean shutdown.
Also adds some e2e test to ensure prune --external works.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This handles the transient store options from the container/storage
configuration in the runtime/engine.
Changes are:
* Print transient store status in `podman info`
* Print transient store status in runtime debug output
* Add --transient-store argument to override config option
* Propagate config state to conmon cleanup args so the callback podman
gets the same config.
Note: This doesn't really change any behaviour yet (other than the changes
in containers/storage).
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Startup healthchecks are similar to K8S startup probes, in that
they are a separate check from the regular healthcheck that runs
before it. If the startup healthcheck fails repeatedly, the
associated container is restarted.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add documentation on the new Netavark option, `metric`, used to
set default route preference for containers joined to multiple
networks.
[NO NEW TESTS NEEDED]
Signed-off-by: Matthew Heon <mheon@redhat.com>
Quadlet was doing some custom handling of uid/gid remapping, originating
from pre --userns=auto support, including its own user for getting subuids
which kinda conflicts with the "container" user used for that.
This drops all the old support for id remapping in favour of a new set
of keys that more directly map to the podman run options.
We have essentially 3 modes now:
```
RemapUsers=manual
RemapUid=0:10000:10
RemapUid=10:20000:10
RemapGid=0:10000:10
RemapGid=10:20000:10
```
This maps to --uidmap and --gidmap options.
```
RemapUsers=auto
```
This maps to --userns=auto. But you can additionally specify RemapUid,
RemapGid and RemapUidSize which gets applied as options to the
--userns podman option.
```
RemapUsers=keep-id
```
This maps to --userns=keep-id and only works for user units.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
1. proxy value from env `CONTAINER_PROXY`
2. proxy socks5 && socks5h is supported
3. the proxy dial timeout is 3s
Signed-off-by: shuai.yang <shuai.yang@mihoyo.com>
Since pasta is now considered a network mode using it as network name
causes a conflict. For now we will prefer the named network but in a
future major version bump we want to remove this and just use pasta(1).
The docs should reflect that this name is considered deprecated.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add quiet and no-info flags to podman machine start.
No-info suppresses helpful informational tips
Quiet suppresses machine start progress output, as well as informational
tips.
Signed-off-by: Ashley Cui <acui@redhat.com>
Up - do not fail if volume already exists, use the existing one
Down - allow the user to remove the volume by passing --force
Add tests
Update the documentation
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Remove the container/pod ID file along with the container/pod. It's
primarily used in the context of systemd and are not useful nor needed
once a container/pod has ceased to exist.
Fixes: #16387
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
--insecure and --verbose flags for docker compatibility
--tls-verify for syntax compatibility and allow users to inspect
manifests at remote Container Registiries without requiring tls.
Helps fix: https://github.com/containers/podman/issues/14917
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This was a horrible one. I basically went with the podman-run
version, with a few minor changes. See PR for discussion of
diff review.
podman-build is not included here, it is too different.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the abilitiy to deploy the generated kube yaml to a
kubernetes cluster with the podman kube apply command.
Add support to directly apply containers, pods, or volumes
by passing in their names or ids to the command.
Use the kubernetes API endpoints and http requests to connect
to the cluster and deploy the various kubernetes object kinds.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Underscore is special in markdown. We usually escape them
properly, but these are a few that we missed. Found using:
$ ack '[A-Z]\\fI[A-Z]' docs/build/man
(plus one that I found by accident).
If anyone has ideas on how to add a commit check for these,
please speak up. I'm at a complete loss to automate this.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add a new annotation to allow the user to point to a local tar file
If the annotation is present, import the file's content into the volume
Add a flag to PlayKubeOptions to note remote requests
Fail when trying to import volume content in remote requests
Add the annotation to the documentation
Add an E2E test to the new annotation
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
It was a bit unclear what setting it to empty means.
Also, add to the tests verification that this works.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This just fixes the indentation which was previously breaking the
list such that the various network modes were just mixed into one large
paragraph instead of a list.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
This makees much more sense for typical service loads, and can
easily be reverted by `ReadOnly=no`.
Also updates and adds various tests for this.
Signed-off-by: Alexander Larsson <alexl@redhat.com>
OpenShift Merge Robot
Valentin Rothberg
Daniel J Walsh
danishprakash
Giuseppe Scrivano
Aditya R
Paul Holzinger
Toshiki Sonoda
Lokesh Mandvekar
Cedric Staniewski
Jan Hendrik Farr
Laurenz Kruty
Ed Santiago
Matt Heon
Ygal Blum
Tom Deseyn
Erik Sjölund
binghongtao
Abhijeet Kasurde
Ashley Cui
Daniel Rudolf
Petr Lautrbach
Hussam Qasem
Urvashi Mohnani
AndroidKitKat
Jason T. Greene
arctic-alpaca
Park Jaeon
Ali Rizvi-Santiago
Sohan Kunkerkar
tomsweeneyredhat
Alex Willmer
Marek Czernek
restitux
vyasgun
T K Chandra Hasan
Rahil Bhimjiani
salevdns
Claudio Nave
Timothée Ravier
Miloslav Trmač
Daniel Lublin
Ingo Becker
Martin Jackson
Brent Baude
Martin Roukala (né Peres)
Jake Correnti
James Pace
Luís Henrique Faria
Sorin Sbarnea
Alexander Larsson
Ben Boeckel
Chris Evich
Matthew Heon
gupttaru
Tsubasa Watanabe
shuai.yang
Stefano Brivio