This allows use to use STDOUT directly without having to call open
again, also this makes the export API endpoint much more performant
since it no longer needs to copy to a temp file.
I noticed that there was no export API test so I added one.
And lastly opening /dev/stdout will not work on windows.
Fixes#16870
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
In the recent past, I met the frequent need to wait for a container to
exist that, at the same time, may get removed (e.g., system tests in [1]).
Add an `--ignore` option to podman-wait which will ignore errors when a
specified container is missing and mark its exit code as -1. Also
remove ID fields from the WaitReport. It is actually not used by
callers and removing it makes the code simpler and faster.
Once merged, we can go over the tests and simplify them.
[1] github.com/containers/podman/pull/16852
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Including the RawInput in the API output is meaningless.
Fixes: #16497
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
podman update allows users to change the cgroup configuration of an existing container using the already defined resource limits flags
from podman create/run. The supported flags in crun are:
this command is also now supported in the libpod api via the /libpod/containers/<CID>/update endpoint where
the resource limits are passed inthe request body and follow the OCI resource spec format
–memory
–cpus
–cpuset-cpus
–cpuset-mems
–memory-swap
–memory-reservation
–cpu-shares
–cpu-quota
–cpu-period
–blkio-weight
–cpu-rt-period
–cpu-rt-runtime
-device-read-bps
-device-write-bps
-device-read-iops
-device-write-iops
-memory-swappiness
-blkio-weight-device
resolves#15067
Signed-off-by: Charlie Doern <cdoern@redhat.com>
--cidfile : Read container ID from the specified file and restart the container.
--filter : restart the filtered container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
--latest : pause/unpause the latest container.
--filter : pause/unpause the filtered container.
--cidfile : Read container ID from the specified file and pause/unpause the container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Filter flag is added for podman stop and podman --remote stop. Filtering logic is implemented in
getContainersAndInputByContext(). Start filtering can be manipulated to use this logic as well to limit redundancy.
Signed-off-by: Karthik Elango <kelango@redhat.com>
The nolintlint linter does not deny the use of `//nolint`
Instead it allows us to enforce a common nolint style:
- force that a linter name must be specified
- do not add a space between `//` and `nolint`
- make sure nolint is only used when there is actually a problem
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a new `--overwrite` flag to `podman cp` to allow for overwriting in
case existing users depend on the behavior; they will have a workaround.
By default, the flag is turned off to be compatible with Docker and to
have a more sane behavior.
Fixes: #14420
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is an enhancement proposal for the checkpoint / restore feature of
Podman that enables container migration across multiple systems with
standard image distribution infrastructure.
A new option `--create-image <image>` has been added to the
`podman container checkpoint` command. This option tells Podman to
create a container image. This is a standard image with a single layer,
tar archive, that that contains all checkpoint files. This is similar to
the current approach with checkpoint `--export`/`--import`.
This image can be pushed to a container registry and pulled on a
different system. It can also be exported locally with `podman image
save` and inspected with `podman inspect`. Inspecting the image would
display additional information about the host and the versions of
Podman, criu, crun/runc, kernel, etc.
`podman container restore` has also been extended to support image
name or ID as input.
Suggested-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
Allow users to commit containers into a single layer.
Usage
```bash
podman container commit --squash <name>
```
Signed-off-by: Aditya R <arajan@redhat.com>
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves#11805
Signed-off-by: cdoern <cdoern@redhat.com>
CRIU supports checkpoint/restore of file locks. This feature is
required to checkpoint/restore containers running applications
such as MySQL.
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
Nothing was working before, and it's too much to summarize. To make
sure we're not regressing in the future again, enable the remote e2e
tests.
Fixes: #12007
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This adds the parameter '--print-stats' to 'podman container restore'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to restore a checkpoint and print out these
information. CRIU already creates process restore statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the restored container, Podman will now print
out JSON:
# podman container restore --latest --print-stats
{
"podman_restore_duration": 305871,
"container_statistics": [
{
"Id": "47b02e1d474b5d5fe917825e91ac653efa757c91e5a81a368d771a78f6b5ed20",
"runtime_restore_duration": 140614,
"criu_statistics": {
"forking_time": 5,
"restore_time": 67672,
"pages_restored": 14
}
}
]
}
The output contains 'podman_restore_duration' which contains the
number of microseconds Podman required to restore the checkpoint. The
output also includes 'runtime_restore_duration' which is the time
the runtime needed to restore that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
This adds the parameter '--print-stats' to 'podman container checkpoint'.
With '--print-stats' Podman will measure how long Podman itself, the OCI
runtime and CRIU requires to create a checkpoint and print out these
information. CRIU already creates checkpointing statistics which are
just read in addition to the added measurements. In contrast to just
printing out the ID of the checkpointed container, Podman will now print
out JSON:
# podman container checkpoint --latest --print-stats
{
"podman_checkpoint_duration": 360749,
"container_statistics": [
{
"Id": "25244244bf2efbef30fb6857ddea8cb2e5489f07eb6659e20dda117f0c466808",
"runtime_checkpoint_duration": 177222,
"criu_statistics": {
"freezing_time": 100657,
"frozen_time": 60700,
"memdump_time": 8162,
"memwrite_time": 4224,
"pages_scanned": 20561,
"pages_written": 2129
}
}
]
}
The output contains 'podman_checkpoint_duration' which contains the
number of microseconds Podman required to create the checkpoint. The
output also includes 'runtime_checkpoint_duration' which is the time
the runtime needed to checkpoint that specific container. Each container
also includes 'criu_statistics' which displays the timing information
collected by CRIU.
Signed-off-by: Adrian Reber <areber@redhat.com>
The OCICNI port format has one big problem: It does not support ranges.
So if a users forwards a range of 1k ports with podman run -p 1001-2000
we have to store each of the thousand ports individually as array element.
This bloats the db and makes the JSON encoding and decoding much slower.
In many places we already use a better port struct type which supports
ranges, e.g. `pkg/specgen` or the new network interface.
Because of this we have to do many runtime conversions between the two
port formats. If everything uses the new format we can skip the runtime
conversions.
This commit adds logic to replace all occurrences of the old format
with the new one. The database will automatically migrate the ports
to new format when the container config is read for the first time
after the update.
The `ParsePortMapping` function is `pkg/specgen/generate` has been
reworked to better work with the new format. The new logic is able
to deduplicate the given ports. This is necessary the ensure we
store them efficiently in the DB. The new code should also be more
performant than the old one.
To prove that the code is fast enough I added go benchmarks. Parsing
1 million ports took less than 0.5 seconds on my laptop.
Benchmark normalize PortMappings in specgen:
Please note that the 1 million ports are actually 20x 50k ranges
because we cannot have bigger ranges than 65535 ports.
```
$ go test -bench=. -benchmem ./pkg/specgen/generate/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/pkg/specgen/generate
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
BenchmarkParsePortMappingNoPorts-12 480821532 2.230 ns/op 0 B/op 0 allocs/op
BenchmarkParsePortMapping1-12 38972 30183 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMapping100-12 18752 60688 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMapping1k-12 3104 331719 ns/op 223840 B/op 3018 allocs/op
BenchmarkParsePortMapping10k-12 376 3122930 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMapping1m-12 3 390869926 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingReverse100-12 18940 63414 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMappingReverse1k-12 3015 362500 ns/op 223841 B/op 3018 allocs/op
BenchmarkParsePortMappingReverse10k-12 343 3318135 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMappingReverse1m-12 3 403392469 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingRange1-12 37635 28756 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange100-12 39604 28935 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1k-12 38384 29921 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange10k-12 29479 40381 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1m-12 927 1279369 ns/op 143022 B/op 164 allocs/op
PASS
ok github.com/containers/podman/v3/pkg/specgen/generate 25.492s
```
Benchmark convert old port format to new one:
```
go test -bench=. -benchmem ./libpod/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/libpod
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
Benchmark_ocicniPortsToNetTypesPortsNoPorts-12 663526126 1.663 ns/op 0 B/op 0 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1-12 7858082 141.9 ns/op 72 B/op 2 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10-12 2065347 571.0 ns/op 536 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts100-12 138478 8641 ns/op 4216 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1k-12 9414 120964 ns/op 41080 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10k-12 781 1490526 ns/op 401528 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1m-12 4 250579010 ns/op 40001656 B/op 4 allocs/op
PASS
ok github.com/containers/podman/v3/libpod 11.727s
```
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We do not use the ocicni code anymore so let's get rid of it. Only the
port struct is used but we can copy this into libpod network types so
we can debloat the binary.
The next step is to remove the OCICNI port mapping form the container
config and use the better PortMapping struct everywhere.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Implement a new network interface to abstract CNI from libpod. The
interface is implemented for the CNI backend but in the future we can
add more backends.
The code is structured in three new packages:
- `libpod/network/types`: contains the interface definition
and the necessary types for it.
- `libpod/network/cni` contains the interface implementation for the CNI
backend.
- `libpod/network/util` a set of utility functions related to
networking.
The CNI package uses ginkgo style unit tests. To test Setup/Teardown the
test must be run as root. Each test will run in their own namespace to
make the test independent from the host environment.
New features with the CNI backend:
- The default network will be created in memory if it does not exists on
disk.
- It can set more than one static IP per container network.
- Networks are loaded once from disk and only if this interface is
used, e.g. for commands such as `podman info` networks are not loaded.
This reduces unnecessary disk IO.
This commit only adds the interface it is not wired into libpod. This
requires a lot of breaking changes which will be done in a followup
commit.
Once this is integrated into libpod the current network code under
`libpod/network` should be removed. Also the dependency on OCICNI
should be dropped.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This adds support to checkpoint containers out of pods and restore
container into pods.
It is only possible to restore a container into a pod if it has been
checkpointed out of pod. It is also not possible to restore a non pod
container into a pod.
The main reason this does not work is the PID namespace. If a non pod
container is being restored in a pod with a shared PID namespace, at
least one process in the restored container uses PID 1 which is already
in use by the infrastructure container. If someone tries to restore
container from a pod with a shared PID namespace without a shared PID
namespace it will also fail because the resulting PID namespace will not
have a PID 1.
Signed-off-by: Adrian Reber <areber@redhat.com>
Implement container to container copy. Previously data could only be
copied from/to the host.
Fixes: #7370
Co-authored-by: Mehul Arora <aroram18@mcmaster.ca>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
podman stats polled by default in a 1 sec period.
This can put quite some load on a machine if you run many containers.
The default value is now 5 seconds.
You can change this interval with a new, optional, --interval, -i cli flag.
The api request got also a interval query parameter for the same purpose.
Additionally a unused const was removed.
Api and cli will fail the request if a 0 or negative value is passed in.
Signed-off-by: Thomas Weber <towe75@googlemail.com>
compat containers/logs was missing actual usage of until query param.
This led me to implement the until param for libpod's container logs as well. Added e2e tests.
Signed-off-by: cdoern <cdoern@redhat.com>
The checkpoint archive compression was hardcoded to `archive.Gzip`.
There have been requests to make the used compression algorithm
selectable. There was especially the request to not compress the
checkpoint archive to be able to create faster checkpoints when not
compressing it.
This also changes the default from `gzip` to `zstd`. This change should
not break anything as the restore code path automatically handles
whatever compression the user provides during restore.
Signed-off-by: Adrian Reber <areber@redhat.com>
Restored containers, until now, had the same port mappings as the
original started container. This commit adds the parameter '--publish'
to 'podman container restore' with the same semantic as during
create/run.
With this change it is possible to create a copy from a container with a
'--publish' rule and replace the original '--publish' setting with a new
one.
# podman run -p 2345:8080 container
# podman container checkpoint -l --export=dump.tar
# podman container restore -p 5432:8080 --import=dump.tar
The restored container will now listen on localhost:5432 instead of
localhost:2345 as the original created container.
Signed-off-by: Adrian Reber <areber@redhat.com>
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When we stop a container we are printing the full id,
this does not match Docker behaviour or the start behavior.
We should be printing the users rawInput when we successfully
stop the container.
Fixes: https://github.com/containers/podman/issues/9386
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Paul Holzinger
Valentin Rothberg
Toshiki Sonoda
Charlie Doern
OpenShift Merge Robot
Karthik Elango
Jhon Honce
cdoern
Radostin Stoyanov
gcalin
Aditya R
Valentin Rothberg
Daniel J Walsh
Adrian Reber
openshift-ci[bot]
Mehul Arora
Thomas Weber
Matej Vasek
Boaz Shuster