Wire in support for writing the digest of the pushed image to a
user-specified file. Requires some massaging of _internal_ APIs
and the extension of the push endpoint to integrate the raw manifest
(i.e., in bytes) in the stream.
Closes: #18216
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
--insecure and --verbose flags for docker compatibility
--tls-verify for syntax compatibility and allow users to inspect
manifests at remote Container Registiries without requiring tls.
Helps fix: https://github.com/containers/podman/issues/14917
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Motivated to have a working `make lint` on Fedora 37 (beta).
Most changes come from the new `gofmt` standards.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
implement new ssh interface into podman
this completely redesigns the entire functionality of podman image scp,
podman system connection add, and podman --remote. All references to golang.org/x/crypto/ssh
have been moved to common as have native ssh/scp execs and the new usage of the sftp package.
this PR adds a global flag, --ssh to podman which has two valid inputs `golang` and `native` where golang is the default.
Users should not notice any difference in their everyday workflows if they continue using the golang option. UNLESS they have been using an improperly verified ssh key, this will now fail. This is because podman was incorrectly using the
ssh callback method to IGNORE the ssh known hosts file which is very insecure and golang tells you not yo use this in production.
The native paths allows for immense flexibility, with a new containers.conf field `SSH_CONFIG` that specifies a specific ssh config file to be used in all operations. Else the users ~/.ssh/config file will be used.
podman --remote currently only uses the golang path, given its deep interconnection with dialing multiple clients and urls.
My goal after this PR is to go back and abstract the idea of podman --remote from golang's dialed clients, as it should not be so intrinsically connected. Overall, this is a v1 of a long process of offering native ssh, and one that covers some good ground with podman system connection add and podman image scp.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
add support for podman-remote image scp as well as direct access via the API. This entailed
a full rework of the layering of image scp functions as well as the usual API plugging and type creation
also, implemented podman image scp tagging. which makes the syntax much more readable and allows users t tag the new image
they are loading to the local/remote machine:
allow users to pass a "new name" for the image they are transferring
`podman tag` as implemented creates a new image im `image list` when tagging, so this does the same
meaning that when transferring images with tags, podman on the remote machine/user will load two images
ex: `podman image scp computer1::alpine computer2::foobar` creates alpine:latest and localhost/foobar on the remote host
implementing tags means removal of the flexible syntax. In the currently released podman image scp, the user can either specify
`podman image scp source::img dest::` or `podman image scp dest:: source::img`. However, with tags this task becomes really hard to check
which is the image (src) and which is the new tag (dst). Removal of that streamlines the arg parsing process
Signed-off-by: Charlie Doern <cdoern@redhat.com>
* Update method/function signatures use the manifest list name and
images associated with the operation explicitly, in general
func f(ctx context.Context, manifestListName string,
ImageNames []string, options *fOptions)
* Leverage gorilla/mux Subrouters to support API v3.x and v4.x for
manifests
* Make manifest API endpoints more RESTful
* Add PUT /manifest/{id} to update existing manifests
* Add manifests.Annotate to go bindings, uncommented unit test
* Add DELETE /manifest/{Id} to remove existing manifest list, use
PUT /manifest/{id} to remove images from a list
* Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use
PUT /manifest/{id} instead
* Corrected swagger godoc and updated to cover API changes
* Update podman manifest commands to use registry.Context()
* Expose utils.GetVar() to obtain query parameters by name
* Unexpose server.registerSwaggerHandlers, not sure why this was ever
exposed.
* Refactored code to use http.Header instead of map[string]string when
operating on HTTP headers.
* Add API-Version header support in bindings to allow calling explicate
versions of the API. Header is _NOT_ forwarded to the API service.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Podman image scp should never enter the Podman UserNS unless it needs to. This allows for
a sudo exec.Command to transfer images to and from rootful storage. If this command is run using sudo,
the simple sudo podman save/load does not work, machinectl/su is necessary here.
This modification allows for both rootful and rootless transfers, and an overall change of scp to be
more of a wrapper function for different load and save calls as well as the ssh component
Signed-off-by: cdoern <cdoern@redhat.com>
Added functionality for users to transfer images from root storage to rootless storage without using sshd. This is
done through rootful podman by running `sudo podman image scp root@localhost::image user@localhost:: the user is needed
in order to find and use their uid/gid to exec a new process.
added necessary tests, and functions for this implementation. Created new image function Transfer so that
the underlying code is majorly removed from CLI
Signed-off-by: cdoern <cdoern@redhat.com>
First, make podman diff accept optionally a second argument. This allows
the user to specify a second image/container to compare the first with.
If it is not set the parent layer will be used as before.
Second, podman container diff should only use containers and podman
image diff should only use images. Previously, podman container diff
would use the image when both an image and container with this name
exists.
To make this work two new parameters have been added to the api. If they
are not used the previous behaviour is used. The same applies to the
bindings.
Fixes#10649
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When doing a podman images, manifests lists look just like images, so
it is logical that users would assume that they can just podman push them
to a registry. The problem is we throw out weird errors when this happens
and users need to somehow figure out this is a manifest list rather then
an image, and frankly the user will not understand the difference.
This PR will make podman push just do the right thing, by failing over and
attempting to push the manifest if it fails to push the image.
Fix up handling of manifest push
Protocol should bring back a digest string, which can either be
printed or stored in a file.
We should not reimplement the manifest push setup code in the tunnel
code but take advantage of the api path, to make sure remote and local
work the same way.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This change adds code to report the reclaimed space after a prune.
Reclaimed space from volumes, images, and containers is recorded
during the prune call in a PruneReport struct. These structs are
collected into a slice during a system prune and processed afterwards
to calculate the total reclaimed space.
Closes#8658
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
There are many use cases where you want to just mount an image
without creating a container on it. For example you might want
to just examine the content in an image after you pull it for
security analysys. Or you might want to just use the executables
on the image without running it in a container.
The image is mounted readonly since we do not want people changing
images.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This started as a small fix to `podman inspect` where a container
and image, with the same name/tag, were present, and
`podman inspect` was run on that name. `podman inspect` in 1.9
(and `docker inspect`) will give you the container; in v2.0, we
gave the image. This was an easy fix (just reorder how we check
for image/container).
Unfortunately, in the process of testing this fix, I determined
that we regressed in a different area. When you run inspect on
a number of containers, some of which do not exist,
`podman inspect` should return an array of inspect results for
the objects that exist, then print a number of errors, one for
each object that could not be found. We were bailing after the
first error, and not printing output for the containers that
succeeded. (For reference, this applied to images as well). This
required a much more substantial set of changes to properly
handle - signatures for the inspect functions in ContainerEngine
and ImageEngine, plus the implementations of these interfaces,
plus the actual inspect frontend code needed to be adjusted to
use this.
Fixes#6556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Continue the refactoring of image removal. I didn't manage to break all
the following changes into smaller and easier to digest commits due to
time constraints:
* Return an error slice instead of a single error. Use multierror only
in the client/frontend. Reflect that in the types.
* Use the batch image removal in the client while preserving the more
rest-idiomatic single-image removal endpoint.
* Add a new handler for the single-image removal endpoint to make it
share the same code as the batch endpoint.
* Expose bindings for the single and batch endpoints, so we can
properly test them.
* Add several convenience functions for error handling to
pkg/errorhandling.
* Set the correct error type in libpod to set the exit code to 2 when
one or more containers are using an image.
* Massage the bindings tests a bit and tackle compilation errors.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
A surprisingly big change. A core problem was that `podman inspect`
allows for passing containers AND images with the default `--type=all`.
This only worked partially as the data was processed in isolation which
caused various issues (e.g., two separate outputs instead of one) but it
also caused issues regarding error handling.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
While this commit was initially meant to fix#5847, it has turned into a
bigger refactoring which I did not manage to break into smaller pieces:
* Fix#5847 by refactoring the image-removal logic.
* Make the api handler for image-removal use the ABI code. This way,
both (i.e., ABI and Tunnel) end up using the same code. Achieving
this code share required to move some code around to prevent circular
dependencies.
* Everything in pkg/api (excluding pkg/api/types) must now only be
accessed from code using `ABISupport`.
* Avoid imports from entities on handlers to prevent circular
dependencies.
* Move `podman system service` logic into `cmd` to prevent circular
dependencies - it depends on pkg/api.
* Also remove the build header from infra/abi files. It will otherwise
confuse swagger and other tools; errors we cannot fix as go doesn't
expose a build-tag env variable.
Fixes: #5847
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Basic port of V1 podman image tree ID
TODO: Refactor to return tree from service and format in presentation
layer
TODO: Support tunneling mode
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Implement `podman build` for the local client. The remote client will
require some rather large work in the backend and a new build endpoint
for the libpod rest API.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Enable running podman V2 rootless
* Fixed cobra.PersistentPreRunE usage in all the commands
* Leveraged cobra.PersistentPreRunE/cobra.PersistentPostRunE to manage:
* rootless
* trace (--trace)
* profiling (--cpu-profile)
* initializing the registry copies of Image/Container engines
* Help and Usage templates autoset for all sub-commands
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Also implement a new libpod endpoint to add more parameters and to
prevent us from converting between slices and maps and make use of
the filter parsing in the image backend.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Implement `podman-push` and `podman-image-push` for the podmanV2
client.
* Tests for `pkg/bindings` are not possible at the time of writing as we
don't have a local registry running.
* Implement `/images/{name}/push` compat endpoint. Tests are not
implemented for this v2 endpoint. It has been tested manually.
General note: The auth config extraction from the http header is not
implement for push. Since it's not yet supported for other endpoints
either, I deferred it to future work.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement pulling images for the v2 client. What I _really_ don't like
is the fact that we are now having a near identical code clone among
`pkg/domain/infra/abi` and `pkg/api/handlers/libpod`. Partly because we
don't yet have a higher-level pull function and partly because we have
redudancy among `pkg/domain` and `pkg/api`. Pull might be a high
outlier but I am concerned already by the potential of introducing more
redundancy. I'd love to `infra/abi` and `pkg/abi` to really use the
same code in the future.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add support for rm and rmi commands
* Support for registry.ExitCode
* Support for N-errors from domain layer
* Add log-level support
* Add syslog support
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Valentin Rothberg
Daniel J Walsh
Charlie Doern
Valentin Rothberg
Jhon Honce
Paul Holzinger
Paul Holzinger
Baron Lenardson
baude
Matthew Heon
OpenShift Merge Robot
Qi Wang