podman system reset did not clean up machines fully, leaving some config
files, and breaking machines. Now it removes all machines files fully.
Signed-off-by: Ashley Cui <acui@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I was asked to refactor machine inspect output to represent more common
and basic information. machine inspect now has information that would
be appropriate for different machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
add a test to make sure machines are not running while still starting
in order to do this, I added a parameter to `run()` to delineate whether
or not the command should block or not. The non blocking run allows for tests
to get and use the `machineSession` pointer and check the exit code to see if it has finished.
also fix a bug (created by #13996) that before started, the machines would
always say "LastUp" and "Created" Less than one second ago
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Allow podman machine set to change CPUs, Memory and Disk size of a QEMU machine after its been created.
Disk size can only be increased.
If one setting fails to be changed, the other settings will still be applied.
Signed-off-by: Ashley Cui <acui@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman machine was using the file modification time to get the running status
add three new config entries Starting (bool) Created (time) LastUp (time) to actually
keep track of when these events happened. This means we can use the config file
to actually store this data and not mess up the created/last-up time.
This fixes the issues where the machine would report running 15 seconds before it was up.
Also fixes the issue of modifying the file manually and saying the machine is "up"
[NO NEW TESTS NEEDED]
resolves#13711
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
This PR introduces a test suite for podman machine. It can currently be
run on developers' local machines and is not part of the official CI
testing; however, the expectation is that any work on machine should
come with an accompanying test.
At present, the test must be run on Linux. It is untested on Darwin.
There is no Makefile target for the test. It can be run like `ginkgo -v
pkg/machine/test/.`. It should be run as a unprivileged user.
Signed-off-by: Brent Baude <bbaude@redhat.com>
This reverts commit cc3790f332.
We can't change rootful to rootfull because `rootful` is written into the machine config. Changing this will break json unmarshalling, which will break existing machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We are inconsistent on the name, we should stick with rootfull.
[NO NEW TESTS NEEDED] Existing tests should handle this and no tests for
machines exists yet.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow users to inspect their podman virtual machines. This will be
helpful for debug and development alike, because more details about the
machine can be collected.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Certain paths like `../containers/podman/machine/my-test/podman.sock`
do not exist when machine is not started, so removing a machine before
starting it will result in ENOENT which we should ignore cause these
paths do not exists
Closes: https://github.com/containers/podman/issues/13834
[NO TESTS NEEDED]
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
to avoid errors on macos, we use symlinks to long socket names.
Fixes: #12751Fixes: #13609
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
This PR further implements a more structured approach to handling the
files needed by machine. More files are now made as MachineFile which
can then have a symlink (using a shorter path) to them. Also added Set
and Get methods for many of the files.
The next part of the refactor will implement the use of symlinks on
MacOS.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
If podman detects a Machinev1 config, it will automatically migrate it
to the new format.
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
the way machine was written was very adjunct and as such is in dire need
of refactoring to better structures and structure methods where
appropriate. the weekest part is specifically around all the files that
machine requires and how some are just dynamically built on the fly.
this pr defines a new machinefile type which allows us to work with the
file and also takes into account the use of symlinks which are going to
be needed on macos due to its relatively short file length restriction.
also, added unit tests for new methods as well as anywhere else I saw a
need.
Signed-off-by: Brent Baude <bbaude@redhat.com>
WalkDir should be faster the Walk, since we often do
not need to stat files.
[NO NEW TESTS NEEDED] Existing tests should find errors.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When podman gets an error it prints out "Error: " before
printing the error string. If the error message starts with
error, we end up with
Error: error ...
This PR Removes all of these stutters.
logrus.Error() also prints out that this is an error, so no need for the
error stutter.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Use logrus.IsLevelEnabled because this will cover all levels below it as
well. Currently this condition would fail for the trace log level.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We store the full path to qemu in the machine config. When the path
changes on the host the machine can longer be started. To fix it we get
the path again when we fail to start the machine due the missing binary.
We want to store and use the full path first because otherwise existing
machines can break when the qemu version changed.
[NO NEW TESTS NEEDED] We still have no machine tests.
Fixes#13394
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When starting a VM that has been configured with volume mounts, the
podman client attempts to connect via TCP to localhost, which runs
gvproxy to proxy an ephemeral port to the VM's ssh port. Previously,
gvproxy was listening on all interfaces and IP addresses, but this
behavior has changed to listening only on the IPv4 loopback address.
Without this change, if a newer build of gvproxy is used, a podman
machine configured with volume mounts will hang forever after "podman
machine start" with "Waiting for VM ...".
[NO NEW TESTS NEEDED]
Signed-off-by: Burt Holzman <burt@fnal.gov>
Still an unknown number remains but I am running out of patience.
Adding dots is not the best use of my time.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
* supports Go 1.18
* disable a number of new linters
* fix minor stylecheck issues
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
If you want to remove a running machine, you can now pass the --force/-f
to podman machine rm and the machine will be stopped and removed without
confirmations.
Fixes: #13448
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Enable support of virtfs in Podman and darwin. At the time of this writing, it requires a special patch not yet included in upstream qemu.
* Prefer to use a specially built qemu to support virtfs. The qemu is installed under libexec/podman.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Set proxy settings (such as `HTTP_PROXY`, and others)
for the whole guest OS with setting up `DefaultEnvironment`
with a `systemd` configuration file `default-env.conf`,
a `profile.d` scenario file - `default-env.sh` and
a `environment.d` configuration file `default-env.conf`
The **actual** environment variables are read by podman
at a start, then they are encrypted with base64 into
a single string and after are provided into a VM through
QEMU Firmware Configuration (fw_cfg) Device
Inside a VM a systemd service `envset-fwcfg.service`
reads the providead encrypted string from fw_cfg, decrypts
and then adds to the files
- `/etc/systemd/system.conf.d/default-env.conf`
- `/etc/profile.d/default-env.sh`
- `/etc/environment.d/default-env.conf`
At the end this service execute `systemctl daemon-reload`
to propagate new variables for systemd manager
[NO NEW TESTS NEEDED]
Closes#13168
Signed-off-by: esendjer <esendjer@gmail.com>
After refactoring Stop(), mounting volumes was hanging in Start().
Restore the conditional, and add error reporting from isListening.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
if users run podman machine stop && podman machine ls, the status of the
machine in the subsequent ls command would running. now we wait for
everything to complete for stop so that scripting is more accurate.
Fixes: #12815
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Use the same type of mounts for all the machine volumes.
The default could change in the future, depending on OS.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
There are other mount types available, such as NFS or SMB,
or one could use reverse sshfs for better compatibility.
It could either be a global option, or it could perhaps be
overridden for each volume (like the container volumes).
Refactor the creation of the options string or array.
Allow specifying the volume as read-only, if desired.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Allow using the built-in 9pfs feature of qemu,
mounting host directories into vm mountpoints.
The volumes are generic, the mounts are specific.
Wait for the machine to be "running", otherwise
the SSH function might throw an error instead.
Increase the default msize from 8 KiB to 128 KiB
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Added an option to podman machine init to declare the timezone of the
resulting machine. the default is to use the value of the host name or
else a given timezone name like America/Chicago.
Fixes: #11895
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
This commits adds port forwarding logic directly into podman. The
podman-machine cni plugin is no longer needed.
The following new features are supported:
- works with cni, netavark and slirp4netns
- ports can use the hostIP to bind instead of hard coding 0.0.0.0
- gvproxy no longer listens on 0.0.0.0:7777 (requires a new gvproxy
version)
- support the udp protocol
With this we no longer need podman-machine-cni and should remove it from
the packaging. There is also a change to make sure we are backwards
compatible with old config which include this plugin.
Fixes#11528Fixes#11728
[NO NEW TESTS NEEDED] We have no podman machine test at the moment.
Please test this manually on your system.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Equivalent for supported platforms, and makes it easier to support
additional unix-like OSes.
[NO TESTS NEEDED]
Signed-off-by: Maya Rashish <maya@NetBSD.org>
When net.Dial always fail in the above loop, the code following the loop
is executed. This error check prevents this.
[NO TESTS NEEDED]
Signed-off-by: Guillaume Rose <gurose@redhat.com>
to avoid segvs, we should clean up as much of the socket and regular
files from podman machine as possible on stop. also, on start, we
should add logic to remove these files before starting in case the start
process is stopped prematurely (due to an error for example).
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
We have reverted the previous patches to look for the gvproxy binary in
/usr/lib/podman and have again decided to use /usr/libexec/podman
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
A user contributed a one line PR that enabled logging the podman machine
ssh command for debug. The user was not able to complete the submission
so this PR replaces that.
[NO TESTS NEEDED]
Replaces #10798
Signed-off-by: Brent Baude <bbaude@redhat.com>
Given that we do not want to support gvproxy for anything other than
podman machine, we have decided to use a static path of
/usr/lib/podman/gvproxy instead of a lookpath.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
If the tempdir for the OS does not have a podman/, machine start will fail. An example would be after a reboot. We now create the podman dir if it does not exist.
Fixes#10824
[NO TESTS NEEDED]
Signed-off-by: baude <baude@baudes-Mac-mini.localdomain>
Signed-off-by: Brent Baude <bbaude@redhat.com>
Podman machine is only intended for amd64 and arm64 architectures, set
the correct buildtags so that the `pkg/machine`, `pkg/machine/qemu` and
`pkg/machine/libvirt` packages compile correctly.
[NO TESTS NEEDED]
Fixes#10625
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Using the gvproxy application on the host, we can now port forward from
the machine vm on the host. It requires that 'gvproxy' be installed in
an executable location. gvproxy can be found in the
containers/gvisor-tap-vsock github repo.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Only one VM can be up at a time. If another VM is running, or the current VM is running, error out on a podman machine start
[NO TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
When initing a VM, create two add connections - one to user, one to
root.
podman machine remove removes both connections as well.
[NO TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
The --execute flag ended up serving no purpose. It was removed and
documentation was updated.
Fixed a panic when no VM name was provided.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
podman machine list lists all virtual machines & indicates the default VM
connection, if it exists. it also can take a --format flag arg as a go
template.
[NO TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
allow for the user to provide an alternate ignition-file rather than the
auto-generated one.
updated docs to describe ramifications of providing an alterate ignition
file.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
when automatically downloading fcos for the Apple M1, we needed
to replace a statically defined URL with the dynamically
determined one.
also, it appears boolean qemu options `server` and `onwait` are
not defined as `server=on` and `wait=off`.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
users may now provide a fully qualified local file path or a URL to seed
the disk-image to be used in the VM.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
Podman machine remove is now called `rm`.
Podman machine create now supports resizing the image to the value of
--disk-size as provided. The default is to 10G.
Added systemd unit file on guest via ignition that sends a Ready message
to the host over a virtio-socket so that we know when the VM is booted
and ready for use.
Podman machine commands no longer require a VM name as an argument. A
default VM name is defined and if no VM name is provided as a arg, the
default will be used.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
Rename podman machine create to init because we're initing a VM, not
really creating it
Wire up CPUs flag
Suppress QEMU GUI from popping up when not in debug mode
[NO TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
podman machine allows podman to create, manage, and interact with a vm
running some form of linux (default is fcos). podman is then configured
to be able to interact with the vm automatically.
while this is usable on linux, the real push is to get this working on
both current apple architectures in macos.
Ashley Cui contributed to this PR and was a great help.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
OpenShift Merge Robot
Ashley Cui
Jhon Honce
Paul Holzinger
Brent Baude
cdoern
Ed Santiago
Daniel J Walsh
Aditya R
Jason T. Greene
Burt Holzman
Valentin Rothberg
Thibault Gagnaux
esendjer
Anders F Björklund
Valentin Rothberg
Jason T. Greene
Hyeon Kim
Maya Rashish
Guillaume Rose
baude
baude