Creating a new diretory results in the test leaking it when it is not
removed via a defer call. All tests have already access to
`podmanTest.TempDir` which will be automatically removed in the
`AfterEach()` block.
While some test were fine other forgot the defer call. To keep the test
consitent and prevent other from making the same mistake convert all
users to `podmanTest.TempDir`. `CreateTempDirInTempDir()` is only used
for the `podmanTest.Setup()` call.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Since commit f250560a80 the play kube command uses its own network.
this is racy be design because we create the network followed by
creating/running pod/containers. This means in the meantime another
prune or reset process could wipe out the network config because we have
to share the network config directory by design in the test.
The problem is we only have one host netns which is shared between
tests. If the network config dir is not shared we cannot make conflict
checks for interface names and ip address. This results in different
tests trying to use the same interface and/or ip address which will
cause runtime failures in CNI and netavark.
The only solution I see is to make sure only the reset/prune tests are
using a custom network dir. This makes sure they do not wipe configs
that are otherwise required by other parallel running tests.
Fixes#17946
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Just like buildkit buildah must allow cleaning the buildcache and cache generated on host by --mount=type=cache just like buildkit's prune command.
See: https://github.com/moby/buildkit#cache
Signed-off-by: Aditya R <arajan@redhat.com>
Drop support for remote use-cases when `.containerignore` or
`.dockerignore` is a symlink pointing to arbitrary location on host.
Signed-off-by: Aditya R <arajan@redhat.com>
July 2022: test was flaking on new VM images. We needed new
images, so I filed #15014 and skipped the test.
January 2023: no attention from anyone, so I'll try bumping up
a dd timeout from 10s to 30s. But in the interim, the test
has broken: it used to expect "Containerfile" in output (this
was deliberately added in #13655)... but #16810 changed that
so Containerfile no longer appears. @flouthoc argues that
this too is deliberate (#17059). Okay, so let's change the
test then. All I care about is not adding more regressions.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman-remote converts and sends absolute path as context when its an
emptydir by adding additional seperator however it should correctly trim
the path and not add additional seperator for such use cases.
Closes: BZ#2145054
Signed-off-by: Aditya R <arajan@redhat.com>
The remote client should be allowed to specify if the container should
be run with the proxy env vars. It will still use the proxy vars from
the server process and not the client. This makes podman-remote more
consistent with the local version and easier to use in environments
where a proxy is required.
Fixes#16520
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Package `io/ioutil` was deprecated in golang 1.16, preventing podman from
building under Fedora 37. Fortunately, functionality identical
replacements are provided by the packages `io` and `os`. Replace all
usage of all `io/ioutil` symbols with appropriate substitutions
according to the golang docs.
Signed-off-by: Chris Evich <cevich@redhat.com>
...and enable the at-test-time confirmation, the one that
double-checks that if CI requests runc we actually use runc.
This exposed a nasty surprise in our setup: there are steps to
define $OCI_RUNTIME, but that's actually a total fakeout!
OCI_RUNTIME is used only in e2e tests, it has no effect
whatsoever on actual podman itself as invoked via command
line such as in system tests. Solution: use containers.conf
Given how fragile all this runtime stuff is, I've also added
new tests (e2e and system) that will check $CI_DESIRED_RUNTIME.
Image source: https://github.com/containers/automation_images/pull/146
Since we haven't actually been testing with runc, we need
to fix a few tests:
- handle an error-message change (make it work in both crun and runc)
- skip one system test, "survive service stop", that doesn't
work with runc and I don't think we care.
...and skip a bunch, filing issues for each:
- #15013 pod create --share-parent
- #15014 timeout in dd
- #15015 checkpoint tests time out under $CONTAINER
- #15017 networking timeout with registry
- #15018 restore --pod gripes about missing --pod
- #15025 run --uidmap broken
- #15027 pod inspect cgrouppath broken
- ...and a bunch more ("podman pause") that probably don't
even merit filing an issue.
Also, use /dev/urandom in one test (was: /dev/random) because
the test is timing out and /dev/urandom does not block. (But
the test is still timing out anyway, even with this change)
Also, as part of the VM switch we are now using go 1.18 (up
from 1.17) and this broke the gitlab tests. Thanks to @Luap99
for a quick fix.
Also, slight tweak to #15021: include the timeout value, and
reword message so command string is at end.
Also, fixed a misspelling in a test name.
Fixes: #14833
Signed-off-by: Ed Santiago <santiago@redhat.com>
Setting the build context to a dedicated subdir makes sure that the test does not
flake when running in parallel, as the test is isolated from other tests
that may dump secrets in a higher level context dir.
This should have been done in
https://github.com/containers/podman/pull/13457, as this makes that PR
actually work.
Signed-off-by: Ashley Cui <acui@redhat.com>
Buildah already supports using `--layers` with `--squash` after https://github.com/containers/buildah/pull/3674
if user wants to do so hence podman must honor similar configuration
in `--squash-all` behaviour if user wants to using cache.
PS: We cannot alter behaviour of `podman build --squash` for
docker-compat reasons hence this feature can be easily supported by
`--squash-all`.
Closes: https://github.com/containers/buildah/issues/4011
Signed-off-by: Aditya R <arajan@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is a very late followup to my ginkgo-improving work of 2021.
It has been stuck since December because it requires gomega 1.17,
which we've just enabled.
This commit is simply a copy-paste of a command I saved in
my TODO list many months ago:
sed -i -e 's/Expect(\([^ ]\+\)\.\([a-zA-Z0-9]\+\))\.To(Equal(/Expect(\1).To(HaveField(\"\2\", /' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
Ensure a directory added to .containerignore on client is not included
in tar sent to remote podman API service
* Clean up podman invocations to not include duplicate --remote and
--url flags
* Use pkill vs. pgrep when cleaning up podman API service in tests
* Add exit code when logging error when testing
Closes#13535
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman build fails on remote build when using a relative context directory.
This is because the context dir was not being added to the tar, so when remote
the compat build function would not be able to stat the contextDir.
resolves#13293
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Secret-verify-leak is causing flakes, when running in parallel tests.
This is because remote secrets are copied into the context directory to
send to the API server, and secret-verify-leak is doing a COPY * and
then checking if the temporary secret file ends up in the container or
not. Since all the temporary files are prefixed with
"podman-build-secret", this test checks if podman-build-secret is in the
image. However, when run in parallel with other tests, other temporary
podman-build-secrets might be in the context dir. Moving
secret-verify-leak into its own directory makes sure that the context
dir is used only by this one test.
Also renamed Dockerfile -> Containerfile and cleaned up unused
Containerfiles.
Signed-off-by: Ashley Cui <acui@redhat.com>
While resolving `workdir` we mostly create a `workdir` when `stat`
fails with `ENOENT` or `ErrNotExist` however following cases are not
true when user explicitly specifies a `workdir` while `running` using
`--workdir` which tells `podman` to only use workdir if its exists on
the container. Following configuration is implicity set with other
`run` mechanism like `podman play kube`
Problem with explicit `--workdir` or similar implicit config in `podman play
kube` is that currently podman ignores the fact that workdir can also be
a `symlink` and actual `link` could be valid.
Hence following commit ensures that in such scenarios when a `workdir`
is not found and we cannot create a `workdir` podman must perform a
check to ensure that if `workdir` is a `symlink` and `link` is resolved
successfully and resolved link is present on the container then we
return as it is.
Docker performs a similar behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
Bumps Buildah to v1.24.0 and adopts the new values for pull:
true, false, never, and always. The pull-never and pull-always options
for the build command are still usable, but they have been removed from
the man page documentation with this change.
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
podman build always finds the abs path but was never using it for the containerfile path. This
was causing the remote client to be given a relative path that does not exist. Switch to evaluating and using absolute paths only.
resolves#12841
Signed-off-by: cdoern <cdoern@redhat.com>
Do not apply reserved annotations from the image to the container.
Reserved annotations are applied during container creation to retrieve
certain information (e.g., custom seccomp profile or autoremoval)
once a container has been created.
Context: #12671
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Old build tests were expecting genric error code `125` however another
commit in this PR ensures that we relay exact exit code from build to
registry.
Hence adjusting tests
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Podman does not relay exit code from buildah instead returns a generic
error code `125`. Following PR allows `podman` to relay exit code from
`imagebuildah` to `registry` as it is.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Write a BeValidJSON() matcher, and replace IsJSONOutputValid():
sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go
(Plus a few manual tweaks)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Prevents temp secrets leaking into image by moving it away from context
directory to parent builder directory. Builder directory automatically
gets cleaned up when we are done with the build.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Podman remote must treat build secrets as part of context directory. If
secret path is absolute path on host copy it to tar file and pass it to
remote server.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Many ginkgo tests have been written to use this evil form:
GrepString("foo")
Expect(that to BeTrue())
...which yields horrible useless messages on failure:
false is not true
Identify those (automatically, via script) and convert to:
Expect(output to ContainSubstring("foo"))
...which yields:
"this output" does not contain substring "foo"
There are still many BeTrue()s left. This is just a start.
This is commit 1 of 2. It includes the script I used, and
all changes to *.go are those computed by the script.
Commit 2 will apply some manual fixes.
Signed-off-by: Ed Santiago <santiago@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Currently pull policy is set incorrectly when users set --pull-never.
Also pull-policy is not being translated correctly when using
podman-remote.
Fixes: #9573
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently podman is ignoreing the build --timestamp flag.
This PR fixes this for local and remote clients.
Fixes: https://github.com/containers/podman/issues/9569
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fixes: https://github.com/containers/podman/issues/9290
Currently we still have hard coded --isolation=chroot for podman-remote build.
Implement missing arguments for podman build
Implements
--jobs, --disable-compression, --excludes
Fixes:
MaxPullPushRetries
RetryDuration
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Buildah bud passes a bunch more flags then podman build.
We need to implement hook up all of these flags to get full functionality.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
1.) podman cannot send proper dockerfile when it is not inside root
folder.
2.) support for sending symlinks and folders inside context dir
3.) when sending context dir as tar to remote, prevent sending items
inside .dockerignore
Signed-off-by: Kazım SARIKAYA <kazimsarikaya@sanaldiyar.com>
Paul Holzinger
OpenShift Merge Robot
Aditya R
Ed Santiago
Toshiki Sonoda
Chris Evich
Ashley Cui
Daniel J Walsh
Jhon Honce
cdoern
tomsweeneyredhat
Valentin Rothberg
cdoern
Kazım SARIKAYA
Hironori Shiina