With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
When going through the output of `podman inspect` to try and
identify another issue, I noticed that Podman 2.0 was setting
StopSignal to 0 on containers by default. After chasing it
through the command line and SpecGen, I determined that we were
actually not setting a default in Libpod, which is strange
because I swear we used to do that. I re-added the disappeared
default and now all is well again.
Also, while I was looking for the bug in SpecGen, I found a bunch
of TODOs that have already been done. Eliminate the comments for
these.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We initially believed that implementing this required support for
restarting containers after reboot, but this is not the case.
The unless-stopped restart policy acts identically to the always
restart policy except in cases related to reboot (which we do not
support yet), but it does not require that support for us to
implement it.
Changes themselves are quite simple, we need a new restart policy
constant, we need to remove existing checks that block creation
of containers when unless-stopped was used, and we need to update
the manpages.
Fixes#6508
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add a `--replace` flag to the `container {create,run}` commands.
If another container with the same name already exists, it will
be replaced and removed.
Adding this flag is motivated by #5485 to make running Podman in systemd
units (or any other scripts/automation) more robust. In case of a
crash, a container may not be removed by a sytemd unit anymore. The
`--replace` flag allows for supporting crashes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Allow containers to join an existing pod via the `--pod-id-file` which
is already supported by a number of `podman-pod` subcommands. Also add
tests to make sure it's working and to prevent future regressions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We previously enforced this for security reasons, but as Dan has
explained on several occasions, it's not very valuable there
(it's trivially easy to bypass) and it does seriously annoy folks
trying to use named volumes. Flip the default from 'on' to 'off'.
Signed-off-by: Matthew Heon <mheon@redhat.com>
fixes tests to pass for remote integration. the two remaining tests that are skipped are due to lack of logs command.
Signed-off-by: Brent Baude <bbaude@redhat.com>
To try and identify differences between Podman v1.9 and master,
I ran a series of `podman run` commands with various flags
through each, then inspecting the resulting containers and diffed
the inspect JSON between each. This identified a number of issues
which are fixed in this PR.
In order of discovery:
- Podman v2 gave short names for images, where Podman v1 gave the
fully-qualified name. Simple enough fix (get image tags and use
the first one if they're available)
- The --restart flag was not being parsed correctly when a number
of retries was specified. Parsing has been corrected.
- The -m flag was not setting the swap limit (simple fix to set
swap in that case if it's not explicitly set by the user)
- The --cpus flag was completely nonfunctional (wired in its
logic)
Tests have been added for all of these to catch future
regressions.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We attempted to share all logic for parsing labels and
environment variables, which on the surface makes lots of sense
(both are formatted key=value so parsing logic should be
identical) but has begun to fall apart now that we have added
additional logic to environment variable handling. Environment
variables that are unset, for example, are looked up against
environment variables set for the process. We don't want this for
labels, so we have to split parsing logic.
Fixes#3854
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Use GetDefaultAuthFile() from buildah.
For podman command(except login), if authfile does not exist returns error.
close#4328
Signed-off-by: Qi Wang <qiwan@redhat.com>
Test that when we pull using tag or digest references from locations
that are manifest lists, that we can inspect using the references that
we used for pulling, that the tags show up in the RepoTag list when we
inspect an image that was pulled using a tag, and that the list and
instance digests always both show up in the RepoDigest list.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Requirement from https://github.com/containers/libpod/issues/3575#issuecomment-512238393
Added --pull for podman create and pull to match the newly added flag in docker CLI.
`missing`: default value, podman will pull the image if it does not exist in the local.
`always`: podman will always pull the image.
`never`: podman will never pull the image.
Signed-off-by: Qi Wang <qiwan@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
do not try to use ctr if there was an error. It fixes a segfault when
there is already a container with the same name.
regression introduced by: ba65301c95
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
We have little to no testing to make sure we don't break podman image and
podman container commands that wrap traditional commands.
This PR adds tests for each of the commands.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Previously, 'podman create --rm' did not work - it wouldn't error
but it did nothing.
It is now fixed, but unfortunately the unit tests used it a lot,
in ways that just do not work when it actually functions.
Begin the process of fixing now-failing tests.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
when a user specifies --pod to podman create|run, we should create that pod
automatically. the port bindings from the container are then inherited by
the infra container. this signicantly improves the workflow of running
containers inside pods with podman. the user is still encouraged to use
podman pod create to have more granular control of the pod create options.
Signed-off-by: baude <bbaude@redhat.com>
Because our tests are getting so long, we want to be able to audit which tests are taking
the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore
should be auditable.
Also, make speed improvements to tests by making sure we only unpack caches images that
actually get used.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1178
Approved by: mheon
Also add annotations from the image the container was created
from.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #886
Approved by: rhatdan
Inspect should be able to inspect one or more containers depending
on the user input. Therefore, inspect output should be in array
format so the consumer could potentially iterate it. This PR allows
users to specify one more or containers|images|or a mix for
inspection. The output, as stated, is therefore in array form. This
holds true even for a singular image.
In the case that the user enters an invalid container|image "name", we
handle that gracefully. Podman will output json for the valid names
until it reaches the invalid one. For example:
In this case, podman will out the json for alpine and then print an
error about 123 being invalid. It will not continute onto busybox.
This behavior imatates docker.
This addresses issue #360
Signed-off-by: baude <bbaude@redhat.com>
Closes: #371
Approved by: baude
Made a change to make sure that the output paths of podman inspect
matches that of docker inspect. For example to get the stop signal
you should be able to do podman inspect ctr --format {{.Config.StopSignal}}
and the same thing in docker will give the same results.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #292
Approved by: rhatdan
Migrate create and commit bats tests to the ginkgo
test suite. In doing so, some structures had to be
moved to pkg/podmanstructs/podmanstructs.go so we
could do better verification of test results.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #286
Approved by: rhatdan
Valentin Rothberg
Ashley Cui
Matthew Heon
Daniel J Walsh
OpenShift Merge Robot
Matthew Heon
Brent Baude
Giuseppe Scrivano
Qi Wang
Nalin Dahyabhai
Jhon Honce
Yiqiao Pu
Matthew Heon
umohnani8