This change aims to store an error message to the ContainerState struct
with the last known error from the Start, StartAndAttach, and Stop OCI
Runtime functions.
The goal was to act in accordance with Docker's behavior.
Fixes: #13729
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Also update vendor of containers/storage and image
Cleanup display of added/dropped capabilties as well
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
A number of standard image names were lower-case, leading to
confusion in code such as:
registry := podman(... , "-n", "registry", registry, ...)
^--- variable ^---- constant
Fix a number of those to be capitalized and with _IMAGE suffix:
registry := podman(..., REGISTRY_IMAGE
Signed-off-by: Ed Santiago <santiago@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is a very late followup to my ginkgo-improving work of 2021.
It has been stuck since December because it requires gomega 1.17,
which we've just enabled.
This commit is simply a copy-paste of a command I saved in
my TODO list many months ago:
sed -i -e 's/Expect(\([^ ]\+\)\.\([a-zA-Z0-9]\+\))\.To(Equal(/Expect(\1).To(HaveField(\"\2\", /' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure we're waiting for the ls container to finish to prevent
potential flakes or future regressions.
Spotted while enabling a linter.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Write a BeValidJSON() matcher, and replace IsJSONOutputValid():
sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go
(Plus a few manual tweaks)
Signed-off-by: Ed Santiago <santiago@redhat.com>
That previous commit made me wonder if there are any other
instances of Expect() with no assertions.
grep Expect test/e2e/*_test.go |egrep -v '\.(To|NotTo|Should)'
...finds a couple of handfuls, most of which are OK (continued
on the next line) but a few of which are bugs. Fix those.
Signed-off-by: Ed Santiago <santiago@redhat.com>
(Sorry, couldn't resist).
CI flakes have been coming down - thank you to everyone who has
been making them a priority.
This leaves a noisy subset that I've just been ignoring for months:
Running: podman ... -p 8080:something
...cannot listen on the TCP port: listen tcp4 :8080: bind: address already in use
Sometimes these are one-time errors resolved on 2nd try; sometimes
they fail three times, forcing CI user to hit Rerun. In all cases
they make noise in my flake logs, which costs me time.
My assumption is that this has to do with ginkgo running random
tests in parallel. Since many e2e tests simplemindedly use 8080,
collisions are inevitable.
Solution: simplemindedly replace 8080 with other (also arbitrarily
picked) numbers. This is imperfect -- it requires human developers
to pick a number NNNN and 'grep NNNN test/e2e/*' before adding
new tests, which I am 100% confident ain't gonna happen -- but
it's better than what we have now.
Side note: I considered writing and using a RandomAvailablePort()
helper, but that would still be racy. Plus, it would be a pain
to interpolate strings into so many places. Finally, with this
hand-tooled approach, if/when we _do_ get conflicts on port NNNN,
it should be very easy to grep for NNNN, find the offending tests
that reuse that port, and fix one of them.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Flush should be called after the last call to Write to ensure that any data buffered in the Writer is written to output.
Any incomplete escape sequence at the end is considered complete for formatting purposes.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
The order of CapAdd when inspecting containers is deterministic.
However, the order of CapDrop is not (for unclear reasons). Add a
quick sort on the final array to guarantee a consistent order.
Fixes#9490
Signed-off-by: Matthew Heon <mheon@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When doing a container inspect on a container with unlimited ulimits,
the value should be -1. But because the OCI spec requires the ulimit
value to be uint64, we were displaying the inspect values as a uint64 as
well. Simple change to display as an int64.
Fixes: #9303
Signed-off-by: baude <bbaude@redhat.com>
when inspecting a container that is only connected to the default
network, we should populate the default network in the container inspect
information.
Fixes: #6618
Signed-off-by: baude <bbaude@redhat.com>
MH: Small fixes, added another test
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
in an effort to speed up the remote testing, we should be using
lookaside storage to avoid pull images as well as importing multiple
images into the RW store.
one test was removed and added into system test by Ed in #8325
Signed-off-by: baude <bbaude@redhat.com>
Followon to #7965 (mirror registry). mirror.gcr.io doesn't
cache all the images we need, and I can't find a way to
add to its cache, so let's just use quay.io for those
images that it can't serve.
Tools used:
skopeo copy --all docker://docker.io/library/alpine:3.10.2 \
docker://quay.io/libpod/alpine:3.10.2
...and also:
docker.io/library/alpine:3.2
docker.io/library/busybox:latest
docker.io/library/busybox:glibc
docker.io/library/busybox:1.30.1
docker.io/library/redis:alpine
docker.io/libpod/alpine-with-bogus-seccomp:label
docker.io/libpod/alpine-with-seccomp:label
docker.io/libpod/alpine_healthcheck:latest
docker.io/libpod/badhealthcheck:latest
Since most of those were new quay.io/libpod images, they required
going in through the quay.io GUI, image, settings, Make Public.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman inspect only had the capabilities to inspect containers and images. if a user wanted to inspect a pod, volume, or network, they would have to use `podman network inspect`, `podman pod inspect` etc. Docker's cli allowed users to inspect both volumes and networks using regular inspect, so this commit gives the user the functionality
If the inspect type is not specified using --type, the order of inspection is:
containers
images
volumes
networks
pods
meaning if container that has the same name as an image, podman inspect would return the container inspect.
To avoid duplicate code, podman network inspect and podman volume inspect now use the inspect package as well. Podman pod inspect does not because podman pod inspect returns a single json object while podman inspect can return multiple)
Signed-off-by: Ashley Cui <acui@redhat.com>
Now that Dan has added helpful comments to each SkipIfRemote,
let's take the next step and include those messages in the
Skip() output so someone viewing test results can easily
see if a remote test is skipped for a real reason or for
a FIXME.
This commit is the result of a simple:
perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go
in the test/e2e directory, with a few minor (manual) changes
in wording.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Remove ones that are not needed.
Document those that should be there.
Document those that should be fixed.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This started as a small fix to `podman inspect` where a container
and image, with the same name/tag, were present, and
`podman inspect` was run on that name. `podman inspect` in 1.9
(and `docker inspect`) will give you the container; in v2.0, we
gave the image. This was an easy fix (just reorder how we check
for image/container).
Unfortunately, in the process of testing this fix, I determined
that we regressed in a different area. When you run inspect on
a number of containers, some of which do not exist,
`podman inspect` should return an array of inspect results for
the objects that exist, then print a number of errors, one for
each object that could not be found. We were bailing after the
first error, and not printing output for the containers that
succeeded. (For reference, this applied to images as well). This
required a much more substantial set of changes to properly
handle - signatures for the inspect functions in ContainerEngine
and ImageEngine, plus the implementations of these interfaces,
plus the actual inspect frontend code needed to be adjusted to
use this.
Fixes#6556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We are currently able to inspect images with
`podman container inspect` and containers with
`podman image inspect` and neither of those seem correct. This
ensures that the appropriate flags, and only the appropriate
flags, are available for each specialized exec, and they can only
inspect the specific type they were intended to.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We also need to rework container/image inspect to be separate,
but that can happen in another PR.
Fixes#6472
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
A surprisingly big change. A core problem was that `podman inspect`
allows for passing containers AND images with the default `--type=all`.
This only worked partially as the data was processed in isolation which
caused various issues (e.g., two separate outputs instead of one) but it
also caused issues regarding error handling.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when a docker image has a defined healthcheck, it should be displayed with inspect. this is only valid for docker images as oci images are not aware of healthchecks.
Fixes: #4799
Signed-off-by: Brent Baude <bbaude@redhat.com>
Currently, if a user requests the size on a container (inspect --size -t container),
the SizeRw does not show up if the value is 0. It's because InspectContainerData is
defined as int64 and there is an omit when empty.
We do want to display it even if the value is empty. I have changed the type of SizeRw to be a pointer to an int64 instead of an int64. It will allow us todistinguish the empty value to the missing value.
I updated the test "podman inspect container with size" to ensure we check thatSizeRw is displayed correctly.
Closes#4744
Signed-off-by: NevilleC <neville.cain@qonto.eu>
Store the full command plus arguments of the process the container has
been created with. Expose this data as a `Config.CreateCommand` field
in the container-inspect data as well.
This information can be useful for debugging, as we can find out which
command has created the container, and, if being created via the Podman
CLI, we know exactly with which flags the container has been created
with.
The immediate motivation for this change is to use this information for
`podman-generate-systemd` to generate systemd-service files that allow
for creating new containers (in contrast to only starting existing
ones).
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The json field is called `Image` while the go field is called `ImageID`,
tricking users into filtering for `Image` which ultimately results in an
error. Hence, rename the field to `Image` to align json and go.
To prevent podman users from regressing, rename `Image` to `ImageID` in
the specified filters. Add tests to prevent us from regressing. Note
that consumers of the go API that are using `ImageID` are regressing;
ultimately we consider it to be a bug fix.
Fixes: #4193
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This provides backwards compatability with 1.4.0-1.4.2 releases
which name .Source and .Destination as .Src and .Dst - useful for
not breaking toolbox.
Also add a test.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
This can help scripts provide a more meaningful message when coming
across issues [1] which require the container to be re-created.
[1] eg., https://github.com/containers/libpod/issues/2673
Signed-off-by: Debarshi Ray <rishi@fedoraproject.org>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
Jake Correnti
Daniel J Walsh
Paul Holzinger
Ed Santiago
Valentin Rothberg
Valentin Rothberg
Aditya Rajan
chenkang
Matthew Heon
baude
Jhon Honce
Ashley Cui
Matthew Heon
OpenShift Merge Robot
Neville Cain
Debarshi Ray