I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
partially revert 95c45773d7
restrict the cases where /sys is bind mounted from the host.
The heuristic doesn't detect all the cases where the bind mount is not
necessary, but it is an improvement on the previous version where /sys
was always bind mounted for rootless containers unless --net none was
specified.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
These tests simply will not work under these conditions.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
For some reason we were overwriting memory when handling both
--pid=host and --ipc=host. Simplified the code to handle this
correctly, and add test to make sure it does not happen again.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
allow a container to run in a new cgroup namespace.
When running in a new cgroup namespace, the current cgroup appears to
be the root, so that there is no way for the container to access
cgroups outside of its own subtree.
By default it uses --cgroup=host to keep the previous behavior.
To create a new namespace, --cgroup=private must be provided.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
Some callers assume when SystemExec returns, the command has completed.
Other callers explicitly wait for completion (as required). However,
forgetting to do that is an incredibly easy mistake to make. Fix this
by adding an explicit parameter to the function. This requires
every caller to deliberately state whether or not a completion-check
is required.
Also address **many** resource naming / cleanup completion-races.
Signed-off-by: Chris Evich <cevich@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
We seem to be having a few flakes on namespace sharing.
Adding this test to make sure sharing with the host is working correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1485
Approved by: mheon
This tests fails a lot, I think because of a race condition. Changing to
just make sure the inode of the /dev/shm on the host is the same as inside
the container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1420
Approved by: mheon
Because our tests are getting so long, we want to be able to audit which tests are taking
the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore
should be auditable.
Also, make speed improvements to tests by making sure we only unpack caches images that
actually get used.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1178
Approved by: mheon
Paul Holzinger
Valentin Rothberg
Daniel J Walsh
Ed Santiago
Giuseppe Scrivano
Chris Evich
Brent Baude
Jhon Honce
Yiqiao Pu