Add the systempaths=unconfined option to --security-opt
to match the docker options for unmasking all the paths
that are masked by default.
Add the mask and unmask options to the podman create doc.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
We can't mount sysfs as rootless unless we manage the network
namespace. Problem: slirp4netns is now creating and managing a
network namespace separate from the OCI runtime, so we can't
mount sysfs in many circumstances. The `crun` OCI runtime will
automatically handle this by falling back to a bind mount, but
`runc` will not, so we didn't notice until RHEL gating tests ran
on the new branch.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Add the mask and unmask option to the --security-opt flag
to allow users to specify paths to mask and unmask in the
container. If unmask=ALL, this will unmask all the paths we
mask by default.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
in an effort to speed up the remote testing, we should be using
lookaside storage to avoid pull images as well as importing multiple
images into the RW store.
one test was removed and added into system test by Ed in #8325
Signed-off-by: baude <bbaude@redhat.com>
if --userns=keep-id is specified and not --user is specified, take the
unprivileged capabilities code path so that ambient capabilities are
honored in the container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if the kernel supports ambient capabilities (Linux 4.3+), also set
them when running with euid != 0.
This is different that what Moby does, as ambient capabilities are
never set.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Currenly if a user specifies the name or ID of an external storage
container, we report an error to them.
buildah from scratch
working-container-2
podman rm working-container-2
Error: no container with name or ID working-container-2 found: no such container
Since the user specified the correct name and the container is in storage we
force them to specify --storage to remove it. This is a bad experience for the
user.
This change will just remove the container from storage. If the container
is known by libpod, it will remove the container from libpod as well.
The podman rm --storage option has been deprecated, and removed from docs.
Also cleaned documented options that are not available to podman-remote.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If user sets namespace to host, then default sysctls need to be ignored
that are specific to that namespace.
--net=host ignore sysctls that begin with net.
--ipc=host ignore fs.mqueue
--uts=host ignore kernel.domainname and kernel.hostname
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently the --pull missing|always|never is ignored
This PR implements this for local API. For remote we
need to default to pullpolicy specified in the containers.conf
file.
Also fixed an issue when images were matching other images names
based on prefix, causing images to always be pulled.
I had named an image myfedora and when ever I pulled fedora, the system
thought that it there were two images named fedora since it was checking
for the name fedora as well as the prefix fedora. I changed it to check
for fedora and the prefix /fedora, to prefent failures like I had.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We need to get more tests running in rootless mode. Since cgroupsV2 allows
management of cgroups in rootless environments a lot of more tests can be run.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Now that Dan has added helpful comments to each SkipIfRemote,
let's take the next step and include those messages in the
Skip() output so someone viewing test results can easily
see if a remote test is skipped for a real reason or for
a FIXME.
This commit is the result of a simple:
perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go
in the test/e2e directory, with a few minor (manual) changes
in wording.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Remove ones that are not needed.
Document those that should be there.
Document those that should be fixed.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a bunch of tests to ensure that --volumes-from
works as expected.
Also align the podman create and run man page.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Enables podman create, pull, run, import to use --signature-policy option. Set it as hidden flag to be consistent with other commands.
Signed-off-by: Qi Wang <qiwan@redhat.com>
During the redesign of podman 2.0, we dropped the support for --oom-score-adj.
Test for this flag was bogus and thus passing when it was broken.
Basically just need to set the value in the spec.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877187
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The system defaults /run to "exec" mode, and we default --read-only
mounts on /run to "exec", so --systemd should follow suit.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With previous versions of Podman (like v1.9.2) it was always possible to
specify the log level in any case, for example `INFO`. This behavior has
silently changed, where the `--log-level` flag only accepts lower case
levels. This commit re-enables the old behavior and adds an e2e test for
it.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Fixes: 4c75fe3f70 ("fix pod creation with "new:" syntax")
Commit 4c75fe3f70 passes all net options to the pod but forgot
to unset the options for the container creation. This leads to
erros when using flags like `--ip` since we tried setting
the ip on the pod and container which obviously fails.
I didn't notice the bug because we don't throw an error when
specifing port bindings on a container which joins the pods
network namespace. (#7373)
Also allow the use of `--hostname` and pass that option to the
pod and unset it for the container. The container has to use
the pods hostname anyway. This would error otherwise.
Added tests to prevent regression.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
it allows to customize the options passed down to the OCI runtime for
setting up the /proc mount.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
To sync the behavior between AppArmor and seccomp it is now possible to
also specify seccomp profiles for privileged containers.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
This matches Docker behavior, and seems to make sense - the CMD
may have been specific to the original entrypoint and probably
does not make sense if it was changed.
While we're in here, greatly simplify the logic for populating
the SpecGen's Command. We create the full command when making the
OCI spec, so the client should not be doing any more than setting
it to the Command the user passed in, and completely ignoring
ENTRYPOINT.
Fixes#7115
Signed-off-by: Matthew Heon <mheon@redhat.com>
Allow to create a devpts mount.
This is useful for containers that bind mount /dev/ from the host but
at the same time want to create a terminal.
It can be used as:
podman run -v /dev:/dev --mount type=devpts,target=/dev/pts ...
Closes: https://github.com/containers/podman/issues/6804
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
A recent crun change stopped the creation of the container's
working directory if it does not exist. This is arguably correct
for user-specified directories, to protect against typos; it is
definitely not correct for image WORKDIR, where the image author
definitely intended for the directory to be used.
This makes Podman create the working directory and chown it to
container root, if it does not already exist, and only if it was
specified by an image, not the user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When you execute podman create/run with the --pod new:<name> syntax
the pod was created but the namespaces where not shared and
therefore containers could not communicate over localhost.
Add the default namespaces and pass the network options to the
pod create options.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
Currently we are sending over pids-limits from the user even if they
never modified the defaults. The pids limit should be set at the server
side unless modified by the user.
This issue has led to failures on systems that were running with cgroups V1.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
With Podman v2.0, we broke (or thought we were going to break)
using `--privileged` with `--group-add` and `--security-opt`
(specifically using `--security-opt` for SELinux config).
Signed-off-by: Matthew Heon <mheon@redhat.com>
This will allow containers that connect to the network namespace be
able to use the container name directly.
For example you can do something like
podman run -ti --name foobar fedora ping foobar
While we can do this with hostname now, this seems more natural.
Also if another container connects on the network to this container it
can do
podman run --network container:foobar fedora ping foobar
And connect to the original container,without having to discover the name.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a `--replace` flag to the `container {create,run}` commands.
If another container with the same name already exists, it will
be replaced and removed.
Adding this flag is motivated by #5485 to make running Podman in systemd
units (or any other scripts/automation) more robust. In case of a
crash, a container may not be removed by a sytemd unit anymore. The
`--replace` flag allows for supporting crashes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When using varlink we want to make sure that user specified environment variables
take precedence over http-proxy environment.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Sometime between 10th and 23rd of Feb. 2020, the behavior of crun
changed. Upon consulting with Giuseppe, the podman run tests for
`device-read-*` and `device-write-*` do not depend on the container
output for success, only the exit code. Add a comment and conditional
regarding this in case of cgroupsv2. Also noted that these tests
will likely require future refactoring/simplification.
Signed-off-by: Chris Evich <cevich@redhat.com>
fix#4876
Add `--device-cgroup-rule` to podman create and run. This enables to add device rules after the container has been created.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Use GetDefaultAuthFile() from buildah.
For podman command(except login), if authfile does not exist returns error.
close#4328
Signed-off-by: Qi Wang <qiwan@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
If the HOME environment variable is not set, make sure it is set to
the configuration found in the container /etc/passwd file.
It was previously depending on a runc behavior that always set HOME
when it is not set. The OCI runtime specifications do not require
HOME to be set so move the logic to libpod.
Closes: https://github.com/debarshiray/toolbox/issues/266
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
close#3648
podman create and podman run do not set --env variable if the environment is not present with a value
Signed-off-by: Qi Wang <qiwan@redhat.com>
Docker CLI calls the healthcheck flags "--health-*", instead of
"--healthcheck-*".
Introduce the former, in order to keep compatibility, and alias
the later, in order to avoid breaking current usage.
Change "--healthcheck-*" to "--health-*" in the docs and tests.
Signed-off-by: Hunor Csomortáni <csomh@redhat.com>
Fix Docker CLI compatibility issue: the "--healthcheck-command" option
value should not be split but instead be passed as single string to
"CMD-SHELL", i.e. "/bin/sh -c <opt>".
On the other hand implement the same extension as is already available
for "--entrypoint", i.e. allow the option value to be a JSON array of
strings. This will make life easier for tools like podman-compose.
Updated "--healthcheck-command" option values in tests accordingly.
Continuation of #3455 & #3507
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
This flag passes the host environment into the container. The basic idea is to
leak all environment variables from the host into the container.
Environment variables from the image, and passed in via --env and --env-file
will override the host environment.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add a simple way to copy ulimit values from the host.
if --ulimit host is used then the current ulimits in place are copied
to the container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Four of the healthcheck tests were completely broken. They
were written with the option '--healthcheck-cmd' which is
not an option (it should be '--healthcheck-command', with
'command' as a full word). The tests were merely checking
exit code, not error message, so of course they failed.
I have fixed the command line and added checks for the
expected diagnostic.
(Side note: do not write tests that check exit code but
nothing else. This should not need to be said).
One of the four tests was invalid: --healthcheck-interval 0.5s.
Per Brent:
initially i was going to restrict sub one-second intervals
That test has been removed. It would probably be a good idea
for a future PR to add some validation such as preventing
negative values, but that's left as an exercise for later.
Also: grammar fix in an error message.
Caught by my ginkgo log greasemonkey script, which
highlights 'Error' messages and grabbed my attention.
Signed-off-by: Ed Santiago <santiago@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
Since CI automation is now executing all tests as a regular user, there
is no need for root-based testing to run special rootless tests. Remove
them.
However, the root-based rootless tests did include one test for exercising
the '--rootfs' option which is needed. Add a new general, and more through
test to replace it - meaning it will be executed as root and non-root.
Signed-off-by: Chris Evich <cevich@redhat.com>
Theory: it's SELinux blowing up and preventing us from creating
files as the container. Try and use a fresh dir and :Z to fix.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The flag should be substantially more durable, and no longer
relies on the create artifact.
This should allow it to properly handle our new named volume
implementation.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
integration of healthcheck into create and run as well as inspect.
healthcheck enhancements are as follows:
* add the following options to create|run so that non-docker images can
define healthchecks at the container level.
* --healthcheck-command
* --healthcheck-retries
* --healthcheck-interval
* --healthcheck-start-period
* podman create|run --healthcheck-command=none disables healthcheck as
described by an image.
* the healthcheck itself and the healthcheck "history" can now be
observed in podman inspect
* added the wiring for healthcheck history which logs the health history
of the container, the current failed streak attempts, and log entries
for the last five attempts which themselves have start and stop times,
result, and a 500 character truncated (if needed) log of stderr/stdout.
The timings themselves are not implemented in this PR but will be in
future enablement (i.e. next).
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
The current aliased commands
podman container list
and
podman image list
podman image rm
Do not work properly. The global storage options are broken.
This patch fixes this issue.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We have little to no testing to make sure we don't break podman image and
podman container commands that wrap traditional commands.
This PR adds tests for each of the commands.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Some callers assume when SystemExec returns, the command has completed.
Other callers explicitly wait for completion (as required). However,
forgetting to do that is an incredibly easy mistake to make. Fix this
by adding an explicit parameter to the function. This requires
every caller to deliberately state whether or not a completion-check
is required.
Also address **many** resource naming / cleanup completion-races.
Signed-off-by: Chris Evich <cevich@redhat.com>
We have a consistent CI failure with the notify_socket test that
I can't reproduce locally. There's no reason for the test to have
--rm, so try removing it.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
Add support for executing an init binary as PID 1 in a container to
forward signals and reap processes. When the `--init` flag is set for
podman-create or podman-run, the init binary is bind-mounted to
`/dev/init` in the container and "/dev/init --" is prepended to the
container's command.
The default base path of the container-init binary is `/usr/libexec/podman`
while the default binary is catatonit [1]. This default can be changed
permanently via the `init_path` field in the `libpod.conf` configuration
file (which is recommended for packaging) or temporarily via the
`--init-path` flag of podman-create and podman-run.
[1] https://github.com/openSUSE/catatonitFixes: #1670
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We had two problems with /dev/shm, first, you mount the
container read/only then /dev/shm was mounted read/only.
This is a bug a tmpfs directory should be read/write within
a read-only container.
The second problem is we were ignoring users mounted /dev/shm
from the host.
If user specified
podman run -d -v /dev/shm:/dev/shm ...
We were dropping this mount and still using the internal mount.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when starting or running a container that has --rm, if the starting
container fails (like due to an invalid command), the container should
get removed.
Resolves: #1985
Signed-off-by: baude <bbaude@redhat.com>
when a user specifies --pod to podman create|run, we should create that pod
automatically. the port bindings from the container are then inherited by
the infra container. this signicantly improves the workflow of running
containers inside pods with podman. the user is still encouraged to use
podman pod create to have more granular control of the pod create options.
Signed-off-by: baude <bbaude@redhat.com>
Part of the motivation for 800eb863 (Hooks supports two directories,
process default and override, 2018-09-17, #1487) was [1]:
> We only use this for override. The reason this was caught is people
> are trying to get hooks to work with CoreOS. You are not allowed to
> write to /usr/share... on CoreOS, so they wanted podman to also look
> at /etc, where users and third parties can write.
But we'd also been disabling hooks completely for rootless users. And
even for root users, the override logic was tricky when folks actually
had content in both directories. For example, if you wanted to
disable a hook from the default directory, you'd have to add a no-op
hook to the override directory.
Also, the previous implementation failed to handle the case where
there hooks defined in the override directory but the default
directory did not exist:
$ podman version
Version: 0.11.2-dev
Go Version: go1.10.3
Git Commit: "6df7409cb5a41c710164c42ed35e33b28f3f7214"
Built: Sun Dec 2 21:30:06 2018
OS/Arch: linux/amd64
$ ls -l /etc/containers/oci/hooks.d/test.json
-rw-r--r--. 1 root root 184 Dec 2 16:27 /etc/containers/oci/hooks.d/test.json
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:31:19-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:31:19-08:00" level=warning msg="failed to load hooks: {}%!(EXTRA *os.PathError=open /usr/share/containers/oci/hooks.d: no such file or directory)"
With this commit:
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /etc/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="added hook /etc/containers/oci/hooks.d/test.json"
time="2018-12-02T21:33:07-08:00" level=debug msg="hook test.json matched; adding to stages [prestart]"
time="2018-12-02T21:33:07-08:00" level=warning msg="implicit hook directories are deprecated; set --hooks-dir="/etc/containers/oci/hooks.d" explicitly to continue to load hooks from this directory"
time="2018-12-02T21:33:07-08:00" level=error msg="container create failed: container_linux.go:336: starting container process caused "process_linux.go:399: container init caused \"process_linux.go:382: running prestart hook 0 caused \\\"error running hook: exit status 1, stdout: , stderr: oh, noes!\\\\n\\\"\""
(I'd setup the hook to error out). You can see that it's silenly
ignoring the ENOENT for /usr/share/containers/oci/hooks.d and
continuing on to load hooks from /etc/containers/oci/hooks.d.
When it loads the hook, it also logs a warning-level message
suggesting that callers explicitly configure their hook directories.
That will help consumers migrate, so we can drop the implicit hook
directories in some future release. When folks *do* explicitly
configure hook directories (via the newly-public --hooks-dir and
hooks_dir options), we error out if they're missing:
$ podman --hooks-dir /does/not/exist run --rm docker.io/library/alpine echo 'successful container'
error setting up OCI Hooks: open /does/not/exist: no such file or directory
I've dropped the trailing "path" from the old, hidden --hooks-dir-path
and hooks_dir_path because I think "dir(ectory)" is already enough
context for "we expect a path argument". I consider this name change
non-breaking because the old forms were undocumented.
Coming back to rootless users, I've enabled hooks now. I expect they
were previously disabled because users had no way to avoid
/usr/share/containers/oci/hooks.d which might contain hooks that
required root permissions. But now rootless users will have to
explicitly configure hook directories, and since their default config
is from ~/.config/containers/libpod.conf, it's a misconfiguration if
it contains hooks_dir entries which point at directories with hooks
that require root access. We error out so they can fix their
libpod.conf.
[1]: https://github.com/containers/libpod/pull/1487#discussion_r218149355
Signed-off-by: W. Trevor King <wking@tremily.us>
In some test env, mount with shared options is not included relatime
in the mountinfo file. So remove this from the test case.
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
Set the root propagation based on the properties of volumes and default
mounts. To remain compatibility, follow the semantics of Docker. If a
volume is shared, keep the root propagation shared which works for slave
and private volumes too. For slave volumes, it can either be shared or
rshared. Do not change the root propagation for private volumes and
stick with the default.
Fixes: #1834
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
this pr allows the libpod integration suite to pass on the
ppc64le architecture. in some cases, I had to skip tests.
eventually, these tests need to be fixed so that they properly pass. of
note for this PR is:
* changed the ppc64le default container os to be overlay (over vfs) as vfs seems non-performant on ppc64le
* still run vfs for rootless operations
* some images names for ppc64le had to change because they don't exist.
* this should help getting our CI to run on the platform
Signed-off-by: baude <bbaude@redhat.com>
If someone runs podman as a user (uid) that is not defined in the container
we want generate a passwd file so that getpwuid() will work inside of container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In cases where the image name is more complex like:
quay/baude/alpine_nginx:latest and is not from the docker
registry, we need to be able to run the image by its shortname
such as baude/alpine_nginx. The same goes when the image is
not from a registry but instead has the localhost repository.
This resolves buildah issue #1034
Signed-off-by: baude <bbaude@redhat.com>
This PR makes several key changes to our CI testing. Firstly, we now test
podman on fedora 28, fedora 29, and centos VMS (rather than containers). Any
of these that having failing tests are not marked as required yet. We
still preserve the podman in podman and podman in docker tests as well and
they are marked as required.
The lint and validate work is now done on a openshift container. We also
removed the rpm verification on papr and perform this test under the "images"
test on the openshift ci.
This PR exposes integration test fails on some of our OSs. My expectation is we
will fix those in additional PRs and as they are fixed, we should be flipping
the boolean bit to required.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1492
Approved by: mheon
This is an incomplete fix, as it would be best for the libpod library to be in charge of coordinating the container's dependencies on the infra container. A TODO was left as such. UTS is a special case, because the docker library that namespace handling is based off of doesn't recognize a UTS based on another container as valid, despite the library being able to handle it correctly. Thus, it is left in the old way.
Signed-off-by: haircommander <pehunt@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1347
Approved by: mheon
We should not be using the test systems registries.conf file for integration
tests. We should always use a constructed file created specifically for the
integration tests or we stand to have unpredictable results. The beforeTest
function now sets an environment variable pointing to a registries.conf file
in the test's tempdir. That file will container docker.io as a default.
The afterTest function then clears the environment variable.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1197
Approved by: rhatdan
Because our tests are getting so long, we want to be able to audit which tests are taking
the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore
should be auditable.
Also, make speed improvements to tests by making sure we only unpack caches images that
actually get used.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1178
Approved by: mheon
If more than one volume was mounted using the --volume flag in
podman run, the second and onwards volumes were picking up options
of the previous volume mounts defined. Found out that the options were
not be cleared out after every volume was parsed.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1142
Approved by: mheon
podman now supports --volumes-from flag, which allows users
to add all the volumes an existing container has to a new one.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #931
Approved by: mheon
Building our own image to test built-in volume and user
instead of using the mariadb one.
Solves timeout issue in travis tests.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1044
Approved by: mheon
Vendor an updated version of urfave/cli to fix the parsing of short
options. Until the fix is merged upstream, vendor the code from
github.com/vrothberg/cli containing both, the latest urfave/cli and
the bug fix.
Fixes: #714
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1046
Approved by: rhatdan
The destination path of the built-in volume was not being created
but a relabel was being attempted on it, this was causing issues
with all images that have built-in volumes.
This patch fixes that and ensures the destination volume path
is created.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #1026
Approved by: mheon
podman run command screws up we should get 125
podman run command succeeds but command in container fails to exec 126
podman run command succeeds but command exits with non 0 exit code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #921
Approved by: TomSweeneyRedHat
Add following test cases for security-opt:
- Check default selinux value
- Disable security options in container
- Setup selinux type in security-opt
- Disable seccomp protection
- Configure custom seccomp.json
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
Closes: #837
Approved by: rhatdan
Use function in opencontainers/selinux/go-selinux to check the
selinux status in our test.
Signed-off-by: Yiqiao Pu <ypu@redhat.com>
Closes: #837
Approved by: rhatdan
Currently we are giving all caps to users when running with podman run --user,
They should get none by default. If the command line includes --cap-add, then
we need to run with those capabilties. Similarly we need to drop caps from
bounding set, if user specifies --cap-drop
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #851
Approved by: mheon
When we're given a numeric --user value, default to GID 0 if the numeric
ID doesn't correspond to a user entry in /etc/passwd that can provide us
with the user's primary group ID.
Make sure that GetAdditionalGroupsForUser() returns wrapped errors.
Also test various user:group forms.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Closes: #728
Approved by: mheon
The hidden flag is used to override the path of the default mounts file
for testing purposes.
Also modified the secrets pkg to allow for this override to happen.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #678
Approved by: mheon
If an integer is passed into the --user flag, i.e --user=1234
don't look up the user in /etc/passwd, just assign the integer as the uid.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #652
Approved by: mheon
If the host is in FIPS mode and /etc/system-fips exists
/run/secrets/system-fips is created in the container so that
the container can run in FIPS mode as well.
Signed-off-by: umohnani8 <umohnani@redhat.com>
When STDOUT and STDERR are not attached, we now print a container
ID. Make the tests aware of this.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #638
Approved by: rhatdan
The secrets code was just tarring and copying the contents of the secrets directory on host as is.
This meant it was not accounting for any symlinks inside the directory, leading up to the contents
not being copied over.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #611
Approved by: mheon
--group-add
--blkio-weight-device
--device-read-bps
--device-write-bps
--device-read-iops
--device-write-iops
--group-add now supports group names as well as the gid associated with them.
All the --device flags work now with moderate changes to the code to support both
bps and iops.
Added tests for all the flags.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Closes: #590
Approved by: mheon
Urvashi Mohnani
OpenShift Merge Robot
Matthew Heon
Daniel J Walsh
baude
Giuseppe Scrivano
zhangguanzhang
Ed Santiago
Paul Holzinger
Qi Wang
Sascha Grunert
Matthew Heon
Ashley Cui
Valentin Rothberg
Joseph Gooch
Chris Evich
Peter Hunt
Jhon Honce
Hunor Csomortáni
Stefan Becker
James Cassell
W. Trevor King
Yiqiao Pu
Valentin Rothberg
Matthew Heon
Nalin Dahyabhai