always use the direct mapping when writing the mappings for an
idmapped mount. crun was previously using the reverse mapping, which
is not correct and it is being addressed here:
https://github.com/containers/crun/pull/1147
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
copy the current mapping into a new user namespace, and run into a
separate user namespace.
Closes: https://github.com/containers/podman/issues/17337
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Ha ha. This was supposed to be a trivial little followup to #17174:
https://github.com/containers/podman/pull/17174#discussion_r1085963780
(safer username check when --userns=keep-id)
It got complicated. TL;DR we need to use User.Username, not User.Name.
The latter is GECOS! Tests were working because, on Fedora, GECOS
for root is "root". Found and fixed all 'u.Name' instances, but
if there are any references with a variable other than 'u', they
still need looking into.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Unify the functions used to detect rootless to "isRootless()".
This function can detect to join the user namespace by mistake.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
honor eventual options set in the containers.userns setting in the
containers.conf file, e.g.:
[containers]
userns = "auto:size=8192"
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
idmap is documented as supported for volumes, but it was not added to
the getNamedVolume() function.
Fixes: e83d36665 ("volumes: add new option idmap")
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Package `io/ioutil` was deprecated in golang 1.16, preventing podman from
building under Fedora 37. Fortunately, functionality identical
replacements are provided by the packages `io` and `os`. Replace all
usage of all `io/ioutil` symbols with appropriate substitutions
according to the golang docs.
Signed-off-by: Chris Evich <cevich@redhat.com>
add two new options to the keep-id user namespace option:
- uid: allow to override the UID used inside the container.
- gid: allow to override the GID used inside the container.
For example, the following command will map the rootless user (that
has UID=0 inside the rootless user namespace) to the UID=11 inside the
container user namespace:
$ podman run --userns=keep-id:uid=11 --rm -ti fedora cat /proc/self/uid_map
0 1 11
11 0 1
12 12 65525
Closes: https://github.com/containers/podman/issues/15294
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
`podman-remote` and Libpod API does not supports build with
`--userns=auto` since `IDMappingOptions` were not implemented for API
and bindings, following PR implements passing `IDMappingOptions` via
bindings to API.
Closes: https://github.com/containers/podman/issues/15476
Signed-off-by: Aditya R <arajan@redhat.com>
if an explicit mapping is specified, do not accept `--userns` since it
overriden to "private".
Closes: https://github.com/containers/podman/issues/15233
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
From a security point of view, it would be nice to be able to map a
rootless usernamespace that does not use your own UID within the
container.
This would add protection against a hostile process escapping the
container and reading content in your homedir.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Commit 2 of 2: there were (still are?) a bunch of string
checks that didn't have a corresponding Expect(). IIUC
that means they were NOPs. Try to identify and fix those.
The first few were caught by Go linting, "ok is defined
but not used". When I realized the problem, I looked for
more using:
$ ack -A2 LineInOutputStartsWith
...and tediously eyeballing the results, looking for
matches in which the next line was not Expect(). If
test was wrong (e.g. "server" should've been "nameserver"),
fix that.
Also: remove the remove-betrue script. We don't need it
in the repo, I just wanted to preserve it for posterity.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Many ginkgo tests have been written to use this evil form:
GrepString("foo")
Expect(that to BeTrue())
...which yields horrible useless messages on failure:
false is not true
Identify those (automatically, via script) and convert to:
Expect(output to ContainSubstring("foo"))
...which yields:
"this output" does not contain substring "foo"
There are still many BeTrue()s left. This is just a start.
This is commit 1 of 2. It includes the script I used, and
all changes to *.go are those computed by the script.
Commit 2 will apply some manual fixes.
Signed-off-by: Ed Santiago <santiago@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when joining an existing container user namespace, read the existing
mappings so the storage can be created with the correct ownership.
Closes: https://github.com/containers/podman/issues/7547
Signed-off-by: Giuseppe Scrivano <giuseppe@scrivano.org>
Bind-mounting /etc/passwd into the container is problematic
becuase of how system utilities like `useradd` work. They want
to make a copy and then rename to try to prevent breakage; this
is, unfortunately, impossible when the file they want to rename
is a bind mount. The current behavior is fine for read-only
containers, though, because we expect useradd to fail in those
cases.
Instead of bind-mounting, we can edit /etc/passwd in the
container's rootfs. This is kind of gross, because the change
will show up in `podman diff` and similar tools, and will be
included in images made by `podman commit`. However, it's a lot
better than breaking important system tools.
Fixes#6953
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If I enter a continer with --userns keep-id, my UID will be present
inside of the container, but most likely my user will not be defined.
This patch will take information about the user and stick it into the
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
specify the mappings in the container configuration to the storage
when creating the container so that the correct mappings can be
configured.
Regression introduced with Podman 2.0.
Closes: https://github.com/containers/libpod/issues/6735
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Currently podman run --userns keep-id --user root:root fedora id
The --user flag is ignored. Removing this makes the code work correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
it creates a namespace where the current UID:GID on the host is mapped
to the same UID:GID in the container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
when --uidmap is used, the user won't be able to access
/var/lib/containers/storage/volumes. Use the intermediate mount
namespace, that is accessible to root in the container, for mounting
the volumes inside the container.
Closes: https://github.com/containers/libpod/issues/2713
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
Need to get some small changes into libpod to pull back into buildah
to complete buildah transition.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1270
Approved by: mheon
Giuseppe Scrivano
Chris Evich
Ed Santiago
Toshiki Sonoda
Paul Holzinger
Erik Sjölund
Kristian Klausen
Aditya R
Daniel J Walsh
Valentin Rothberg
Giuseppe Scrivano
OpenShift Merge Robot
Matthew Heon
Brent Baude
Yiqiao Pu