The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
GLOBAL_OPTS haven't been supported for at least two major versions of
Podman. The runlabel code is extremely fragile and I think it should
be rewritten before adding new features.
Fixes: #12436
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When no name is given for podman container runlabel it will default to
the image base name. However this can contain a tag. Since podman does
not accept container names with a colon the run command will fail if it
contains something like `podman run --name NAME ...`.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2004263
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Currently pull policy is set incorrectly when users set --pull-never.
Also pull-policy is not being translated correctly when using
podman-remote.
Fixes: #9573
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Now that Dan has added helpful comments to each SkipIfRemote,
let's take the next step and include those messages in the
Skip() output so someone viewing test results can easily
see if a remote test is skipped for a real reason or for
a FIXME.
This commit is the result of a simple:
perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go
in the test/e2e directory, with a few minor (manual) changes
in wording.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Remove ones that are not needed.
Document those that should be there.
Document those that should be fixed.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Since --pull is deprecated, remove it from help and hide if from --help
Also set it to true by default.
Share image pull code betweern podman image pull and podman container runlabel.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877181
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Current podman container runlabel --display is being ignored.
This is just supposed to display the command that would be run, and
then exit, but instead is actually running the command.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877186
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Use GetDefaultAuthFile() from buildah.
For podman command(except login), if authfile does not exist returns error.
close#4328
Signed-off-by: Qi Wang <qiwan@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This is failing 100% on CI. No time to debug why properly before
we need to cut a release, but is probably related to the change
from a slice to an array.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
The toolbox project would benefit from a few changes to more closely
resembe the original atomic cli project. Changes made are:
* only pull image for container runlabel if the label exists in the image
* if a container image does not have the desired label, exit with non-zero
Signed-off-by: baude <bbaude@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
As discussed [1], the runlabel command should execute any command
specified in a label. The reasoning behind is that we cannot restrict
which options are passed to Podman which thereby has full access to the
host (runlabels must be used with care).
With the updated semantics, runlabel will substitute the commands with a
basepath equal to "docker" or "podman" with "/proc/self/exe", and
otherwise leave the command unchanged to execute any other command on
the host.
[1] https://github.com/containers/libpod/pull/1607#issuecomment-428321382
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Paul Holzinger
Valentin Rothberg
Ed Santiago
Daniel J Walsh
Josh Soref
zhangguanzhang
Brent Baude
Qi Wang
Jhon Honce
Matthew Heon
Yiqiao Pu
Valentin Rothberg