Add three new capabilities that would otherwise be reported as unknown.
Also add an e2e test making sure that `podman top` knows all
capabilities of the current kernel. I refrained from adding a system
test since this may blow up in gating tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
psgo added support for listing supplementary groups via
two new descriptors:
* `groups` for supplementary groups inside the container
* `hgroups` for the counterpart on the host
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
Fallback to executing ps(1) in case we hit an unknown psgo descriptor.
This ensures backwards compatibility with docker-top, which was purely
ps(1) driven.
Also support comma-separated descriptors as input.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
We have little to no testing to make sure we don't break podman image and
podman container commands that wrap traditional commands.
This PR adds tests for each of the commands.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
Because our tests are getting so long, we want to be able to audit which tests are taking
the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore
should be auditable.
Also, make speed improvements to tests by making sure we only unpack caches images that
actually get used.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1178
Approved by: mheon
Use github.com/containers/psgo instead of execing `ps (1)`. The psgo
library enables a much more flexible interface with respect to which
data to be printed (e.g., capabilities, seccomp mode, PID, PCPU, etc.)
while the output can be parsed reliably. The library does not use
ps (1) but parses /proc and /dev instead. To list the processes of a
given container, psgo will join the mount namespace of the given
container and extract all data from there.
Notice that this commit breaks compatibility with docker-top.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1113
Approved by: rhatdan
Make the output of top tabular to be compatible with Docker. Please
note, that any user-input for `GetContainerPidInformation(...)` will be
ignored until we have found a way to generically and reliably parse ps-1
output or until there is a go-lib to extract all the data from /proc in
a ps-1 compatible fashion.
Fixes: #458
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #939
Approved by: rhatdan
As Matt pointed out, when running sleep in a container, the clean up was taking a
full ten seconds to stop container because sleep does not catch SIGTERM which is
the default podman stop signal and it had to wait for SIGKILL. Changing sleep to
top should result in better test times.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #492
Approved by: rhatdan
Due to the way ps arguments work, it was possible to display pids
that dont below to the container in top output. We now filter pids
that dont belong to the container out of the output. This also means
the pid column must be present in the output or we throw an error.
This resolves issue #391
Signed-off-by: baude <bbaude@redhat.com>
Closes: #400
Approved by: rhatdan
Issue #169 describes a common failure when running podman top where
if the commands inside the container container a space in them, podman
will panic. This was occuring because we take the output from ps and
attempt to format it nicely for output and things like JSON. Given that
this cannot be predicted or dealt with programatically, the decision was
made to deprecate the format switch and simply output what ps provides
us.
Migrated top integration tests to ginkgo.
Resolves Issue: https://github.com/projectatomic/libpod/issues/169
Signed-off-by: baude <bbaude@redhat.com>
Closes: #291
Approved by: rhatdan
Piotr Resztak
Valentin Rothberg
Paul Holzinger
Valentin Rothberg
Ed Santiago
Daniel J Walsh
baude
Yiqiao Pu
Valentin Rothberg