Make sure to wait for the container to exit after kill. While the
cleanup process will take care eventually of transitioning the state, we
need to give a guarantee to the user to leave the container in the
expected state once the (kill) command has finished.
The issue could be observed in a flaking test (#16142) where
`podman rm -f -t0` failed because the preceding `podman kill`
left the container in "running" state which ultimately confused
the "stop" backend.
Note that we should only wait for the container to exit when SIGKILL is
being used. Other signals have different semantics.
[NO NEW TESTS NEEDED] as I do not know how to reliably reproduce the
issue. If #16142 stops flaking, we are good.
Fixes: #16142
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The new cobra update fixed a bug which caused some options to not be
included in --help when there was already a option with the same name
on a parent command.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Basically, in the timeout loop where we checked for new CID
on the restarted container, we were running 'podman inspect'
(not 'inspect --format ID'), and comparing full hundred-line
output against single-line CID string.
While I'm in here, add 'c_' prefix to container to make it
easier for my old eyes to recognize "oh, that's a container name"
vs "is that a name? a SHA? a woozle?"
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix the "stop" on-failure action by not removing the transient systemd
timer and service during container stop. Removing the service will
in turn cause systemd to terminate the Podman process attempting to
stop the container and hence leave it in the "stopping" state.
Instead move the removal into the restart sequence.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the on-failure actions only kick in once the health check
has passed its retries. Also fix race conditions on reading/writing the
log.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
In order to allow pods to reach other pods (as in Kubernetes) they all
need to be added to the same network. A network is created (if it
doesn't exist) and pods created by play-kube are added to that network.
When network options are passed to kube command the pods are not
attached to the default kube network.
Signed-off-by: Andrei Natanael Cosma <andrei@intersect.ro>
Include the digest of the image in `podman container inspect`. The image
digest is a key information for auditing as it defines the identify of
an image. This way, it can be determined whether a container used an
image with a given CVE etc.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
I see no reason to block --network host with kube play and force users
to have to set it in the yaml file.
This is just confusing when compared to the other podman create/run
--network options, see discussion in #15945.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixed issue where executing the command `podman pod logs -l` would panic
because it was indexing into an empty arguments array.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Since by default the network config dir is shared in the e2e tests any
other parallel running test could remove a network and cause this test to
fail.
Fixes#15990
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The `podman run` command has been extended with support for checkpoint
images. A checkpoint image contains image files generated by criu that
allow to restore the runtime state of containerized applications. This
patch adds a test case for this functionality.
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
This reverts commit 32f54a81ed.
`pkg/bindings` is supported outside of podman and we have to keep it
stable.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I was testing --log-level by --storage-opt=mount_program=/bin/false
Stop doing that. It's just constantly breaking everything (#15698
and #15977).
I am violently of the opinion that a command-line option must
not destroy a user's system (except for --set-something, --config,
something that makes it very very clear that it is a lasting
change). I seem to be in the minority on this opinion. So, I
give up.
Signed-off-by: Ed Santiago <santiago@redhat.com>
If user does not specify hostPort in a kube.yml file but does specify
a containerPort, then the hostPort should default to the containerPort.
Fixes: https://github.com/containers/podman/issues/15942
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Followup to #15895:
- add a normal-case test, to ensure that --privileged without
systemd continues to pass through /dev/ttyN devices
- explain why we die() if host has no ttyN devices
- I find grep -vx slightly easier to read than sed backslash-slash
- run cleanup with '-t 0', to shave ten seconds from CI run
Signed-off-by: Ed Santiago <santiago@redhat.com>
Auto updates using the "registry" policy require container to be created
with a fully-qualified image reference. Short names are not supported
due the ambiguity of their source registry. Initially, container
creation errored out for non FQN images but it seems that Podman has
regressed.
Fixes: #15879
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
We force the isolate option on new newtworks because that is the docker
behavior. However when we inspect them they should not be displayed to
the caller since they have no idea about it and docker-compose throws an
error because of that.
Fixes#15580
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Changes since 2022-09-09:
- man page: add --skip-unused-stages (buildah 4249)
- man page: bring in new Note for --cache-ttl (4248)
- system tests: de-stutter (4205)
- (internal): in skip() applier: escape asterisk, otherwise
the "bud with --dns* flags" sed expression never applies.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
restore endpoint was totally ignoring --pod, it was missing from the schema and from query handling
on the api handlers side. add support for it here.
resolves#15018
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
This allows tools like Cockpit to know that the pod in question
has also been updated, so they can refresh the list of containers
in the pod.
Fixes#15408
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We added the concept of image volumes in 2.2.0, to support
inspecting an image from within a container. However, this is a
strictly read-only mount, with no modification allowed.
By contrast, the new `image` volume driver creates a c/storage
container as its underlying storage, so we have a read/write
layer. This, in and of itself, is not especially interesting, but
what it will enable in the future is. If we add a new command to
allow these image volumes to be committed, we can now distribute
volumes - and changes to them - via a standard OCI image registry
(which is rather new and quite exciting).
Future work in this area:
- Add support for `podman volume push` (commit volume changes and
push resulting image to OCI registry).
- Add support for `podman volume pull` (currently, we require
that the image a volume is created from be already pulled; it
would be simpler if we had a dedicated command that did the
pull and made a volume from it)
- Add support for scratch images (make an empty image on demand
to use as the base of the volume)
- Add UOR support to `podman volume push` and
`podman volume pull` to enable both with non-image volume
drivers
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
According to https://systemd.io/CONTAINER_INTERFACE/, systemd will try take
control over /dev/ttyN if exported, which can cause conflicts with the host's tty
in privileged containers. Thus we will not expose these to privileged containers
in systemd mode, as this is a bad idea according to systemd's maintainers.
Additionally, this commit adds a bats regression test to check that no /dev/ttyN
are present in a privileged container in systemd mode
This fixes https://github.com/containers/podman/issues/15878
Signed-off-by: Dan Čermák <dcermak@suse.com>
Background: in order to add aarch64 tests, we had to add
emergency skips to a lot of failing tests. No attempt was
ever made to understand why they were failing.
Fast forward to today, I filed #15888 just to see if tests
are still failing. Looks like a number of them are fixed.
(Yes, magically). Remove those skips.
See: #15074, #15277
Signed-off-by: Ed Santiago <santiago@redhat.com>
Allow overwrite of the signature-policy file
by passing signature-policy flag to podman save command
Closes: https://github.com/containers/podman/issues/15869
Signed-off-by: 😎Mostafa Emami <mustafaemami@gmail.com>
Add --label/-l label flag to secret create, and show labels when
inspecting secrets. Also allow labeling secrets via libpod/compat API.
Signed-off-by: Ashley Cui <acui@redhat.com>
Package `io/ioutil` was deprecated in golang 1.16, preventing podman from
building under Fedora 37. Fortunately, functionality identical
replacements are provided by the packages `io` and `os`. Replace all
usage of all `io/ioutil` symbols with appropriate substitutions
according to the golang docs.
Signed-off-by: Chris Evich <cevich@redhat.com>
podman container clone was failing when env variables had multiple `=` in them.
Switch split to splitn
resolves#15836
Signed-off-by: Charlie Doern <cdoern@redhat.com>
This commit fixes `container checkpoint --export`
to print a rawInput or an error.
Fixes: #15743
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Followup to #15616, which is not usable as it is (way, way, way
too much noise) but actually found a few real nits that should
be fixed.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This reverts commit c20abf12c7. In the
absence of `ExecStop` step, systemd will send the stop/kill signals to
the main PID while I asummed that systemd would jump directly to an
ExecStopPost step instead.
Hence revert the commit to let Podman take care of stopping rather than
systemd.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Alias
podman --context -> podman --connection
podman context use -> podman system connection default
podman context rm -> podman system connection rm
podman context create -> podman system connection add
podman context ls ->podman system connection ls
podman context inspect ->podman system connection ls --json (For
specified connections)
Podman context is a hidden command, but can be used for existing scripts
that assume Docker under the covers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Drop the ExecStop step to simplify the generated units a bit.
The extra ExecStopPost step was added by commit e5c3432944. If the
main PID (i.e., conmon) is killed, systemd will not execute ExecStop
(since the main PID is already down) but only execute the *Post steps.
Credits to the late Ulrich Obergfell for tracking this issue down; he is
missed.
The ExecStop step can safely be dropped since the Post step will take of
stopping (and removing) in any case.
Context: #15686
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Docker compatibility: cap the memory limit reported by the cgroup to
the maximum available memory.
Closes: https://github.com/containers/podman/issues/15765
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Originally, during pod removal, we locked every container in the
pod at once, did a number of validity checks to ensure everything
was safe, and then removed all the containers in the pod.
A deadlock was recently discovered with this approach. In brief,
we cannot lock the entire pod (or much more than a single
container at a time) without causing a deadlock. As such, we
converted to an approach where we just looped over each container
in the pod, removing them individually. Unfortunately, this
removed a lot of the validity checking of the earlier approach,
allowing for a lot of unintended bad things. Infra containers
could be removed while containers in the pod still depended on
them, for example.
There's no easy way to do validity checks while in a simple loop,
so I implemented a version of our graph-traversal logic that
currently handles pod start. This version acts in the reverse
order of startup: startup starts from containers which depend on
nothing and moves outwards, while removal acts on containers which
have nothing depend on them and moves inwards. By doing graph
traversal, we can guarantee that nothing is removed while
something that depends on it still exists - so the infra
container should be the last thing in a pod that is removed, for
example.
In the (unlikely) case that a graph of the pod's containers
cannot be built (most likely impossible without database editing)
the old method of pod removal has been retained to ensure that
even misbehaving pods can be forcibly evicted from the state.
I'm fairly confident that this resolves the problem, but there
are a lot of assumptions around dependency structure built into
the original pod removal code and I am not 100% sure I have
captured all of them.
Fixes#15526
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Followup to #15673 (--format with newlines). I cobbled up a test
for it, but I was sloppy, so the test had issues that I kept
having to band-aid. This is a cleaner way to handle podman-machine.
...and, another unexpected surprise with podman stats. It
fails under rootless cgroupsv1. We can't sweep it under the
rug via skip_if_ubuntu because tests will then fail on RHEL8.
So, add a similar mechanism for testing podman stats.
...plus a non-surprise, the 'search' test flakes. Try minimizing
that by searching only $IMAGE. If quay.io is down, other tests
will certainly fail.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Three tests were running 'container rm' on 'start'ed containers
that might not yet have exited. Fix. Also, tighten up the
tests themselves, to make even more sure that they test
what they're supposed to test.
Discovered, in CI, that 'podman-remote logs --timestamps'
was unimplemented. Thanks to @Luap99 for the fix to that.
Fixes: #15783Fixes: #15795
Signed-off-by: Ed Santiago <santiago@redhat.com>
When creating a new pod without the `--name` flag, e.g.:
`podman pod create foobar`
it will get the name `foobar` implicitly and this will be recorded as the in the
`podCreateArgs`. Unfortunately, the implicit name only works if it appears as
the **last** argument of the startup command.
With 6e2e3a78ed we started appending the pod
security policy to the startCommand, resulting in the following `ExecStartPre=`
line:
```
/usr/bin/podman pod create --infra-conmon-pidfile %t/pod-foobar.pid --pod-id-file %t/pod-foobar.pod-id foobar --exit-policy=stop
```
This fails to launch, as the `pod create` command expects only a single
non-flag parameter, but it assumes that `exit-policy=stop` is a second and
terminates immediately instead.
This fixes https://github.com/containers/podman/issues/15592
Signed-off-by: Dan Čermák <dcermak@suse.com>
In view of https://github.com/containers/storage/pull/1337, do this:
for f in $(git grep -l stringid.GenerateNonCryptoID | grep -v '^vendor/'); do
sed -i 's/stringid.GenerateNonCryptoID/stringid.GenerateRandomID/g' $f;
done
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Change the dependencies from a pod unit to its associated container
units from `Requires` to `Wants` to prevent the entire pod from
transitioning to a failed state. Restart policies for individual
containers can be configured separately.
Also make sure that the pod's RunRoot is always set.
Fixes: #14546
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This version does a much better job of error reporting and also catches
more commands.
Changes from edsantiago.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Emit a warning to the user when generating a unit with --new on a
container that was created with a custom --restart policy. As shown
in #15284, a custom --restart policy in that case can lead to issues
on system shutdown where systemd attempts to nuke the unit but Podman
keeps on restarting the container.
Fixes: #15284
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Restart the health-check timers instead of starting them. This will
surpress annoying errors stating that an already running timer cannot be
started anymore.
Also make sure that the transient units/timers are stopped and removed
when stopping a container.
Fixes: #15691
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Now that commit d10e77e1bc is merged, it will reuse the same template
logic as inspect and therefore should just work.
Also remove the FIXME from eds test.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output, we can add a new test for the
newline bug when the common PR is vendored in.
Also fixa bug since the table format is expected to print headers as
well.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The field was already exposed already in the `system df` output
so this just required a bit of plumbing and testing.
As part of this, fix `podman systemd df` volume in-use logic.
Previously, volumes were only considered to be in use if the
container using them was running. This does not match Docker's
behavior, where a volume is considered in use as long as a
container exists that uses the volume, even if said container is
not running.
Fixes#15720
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
- basic : add actual log-level tests
- events : clean up, add --format tests
- systemd : reorder proxy args for legibility
- auto-update : fix missing timeout that could lead to hang
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman --events-backend none events should return with an error since it
will never be able to actually list events.
Fixes part three of #15688
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman --events-backend file events --stream=false should never hang. The
problem is that our tail library will wait for the file to be created
which makes sense when we do not run with --stream=false. To fix this we
can just always create the file when the logger is initialized. This
would also help to report errors early on in case the file is not
accessible.
Fixes part one from #15688
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`os.ReadDir` was added in Go 1.16 as part of the deprecation of `ioutil`
package. It is a more efficient implementation than `ioutil.ReadDir`.
Reference: https://pkg.go.dev/io/ioutil#ReadDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Podman adds an Error: to every error message. So starting an error
message with "error" ends up being reported to the user as
Error: error ...
This patch removes the stutter.
Also ioutil.ReadFile errors report the Path, so wrapping the err message
with the path causes a stutter.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Trying to catch the wiley metacopy flake: add a debug
condition to run_podman, in system tests, to log all
instances in which output includes the metacopy warning.
The idea is to detect the very first time it happens,
and see what is triggering it.
Signed-off-by: Ed Santiago <santiago@redhat.com>
For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This commit was automatically cherry-picked
by buildah-vendor-treadmill v0.3
from the buildah vendor treadmill PR, #13808
Changes since 2022-08-16:
- buildah 4139: minor line-number changes to the diff
file because helpers.bash got edited
- buildah 4190: skip the new test if remote
- buildah 4195: add --retry / --retry-delay
- changes to deal with vendoring gomega, units
- changes to the podman login error message in system test
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`--cpu-rt-period` and `--cpu-rt-runtime` options are only
supported on cgroups V1 rootful systems.
Therefore, podman prints an warning message and ignores these
options when we use cgroups V2 systems.
Related to: #15666
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
map HostUsers=false to userns=auto.
One difference with the current implementation in the Kubelet is that
the podman default size is 1024 while the Kubelet uses 65536.
This is done on purpose, because 65536 is a problem for rootless as
the entire IDs space would be allocated to a single pod.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
`Podman run two containers with the same IP [It]`
This test will be failed in proxy environment.
We need to set the static ip to no_proxy.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Just like the other inspect commands `podman pod inspect p1 p2` should
return the json for both.
To correctly implement this we follow the container inspect logic, this
allows use to reuse the global inspect command.
Note: To not break the existing single pod output format for podman pod
inspect I added a pod-legacy inspect type. This is only used to make
sure we will print the pod as single json and not an array like for the
other commands. We cannot use the pod type since podman inspect --type
pod did return an array and we should not break that as well.
Fixes#15674
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
--debug should not be a global flag, you can only use this as podman
--debug never podman ps --debug. This matches docker and allows us to
add the shorthand "D" since they now no longer conflict.
Fixes changes from commit 2d30b4dee5 which claims to add -D but never
did.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman events --format {{.ID}} was not working since the template was
converted to a range but we only render each event individually.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add auto-update support to `podman kube play`. Auto-update policies can
be configured for:
* the entire pod via the `io.containers.autoupdate` annotation
* a specific container via the `io.containers.autoupdate/$name` annotation
To make use of rollbacks, the `io.containers.sdnotify` policy should be
set to `container` such that the workload running _inside_ the container
can send the READY message via the NOTIFY_SOCKET once ready. For
further details on auto updates and rollbacks, please refer to the
specific article [1].
Since auto updates and rollbacks bases on Podman's systemd integration,
the k8s YAML must be executed in the `podman-kube@` systemd template.
For further details on how to run k8s YAML in systemd via Podman, please
refer to the specific article [2].
An examplary k8s YAML may look as follows:
```YAML
apiVersion: v1
kind: Pod
metadata:
annotations:
io.containers.autoupdate: "local"
io.containers.autoupdate/b: "registry"
labels:
app: test
name: test_pod
spec:
containers:
- command:
- top
image: alpine
name: a
- command:
- top
image: alpine
name: b
```
[1] https://www.redhat.com/sysadmin/podman-auto-updates-rollbacks
[2] https://www.redhat.com/sysadmin/kubernetes-workloads-podman-systemd
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Some system tests in `255-auto-update.bats` and `500-networking.bats`
fail under proxy environment.
This PR fixes this problem.
Signed-off-by: Tsubasa Watanabe <w.tsubasa@fujitsu.com>
podman does not use any service account token, so we set the automount flag
to false in podman generate kube.
Signed-off-by: François Poirotte <clicky@erebot.net>
The e2e tests are incomplete, because they're just too hard
for any human to read/maintain. This defines tests in a
table, so they're easily reviewed and updated. This makes
it very easy to see which options are actually tested and
which are not, under root/rootless cgroups v1/v2.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman update allows users to change the cgroup configuration of an existing container using the already defined resource limits flags
from podman create/run. The supported flags in crun are:
this command is also now supported in the libpod api via the /libpod/containers/<CID>/update endpoint where
the resource limits are passed inthe request body and follow the OCI resource spec format
–memory
–cpus
–cpuset-cpus
–cpuset-mems
–memory-swap
–memory-reservation
–cpu-shares
–cpu-quota
–cpu-period
–blkio-weight
–cpu-rt-period
–cpu-rt-runtime
-device-read-bps
-device-write-bps
-device-read-iops
-device-write-iops
-memory-swappiness
-blkio-weight-device
resolves#15067
Signed-off-by: Charlie Doern <cdoern@redhat.com>
The format used for setting the bind-mount-options annotations
in the kube yaml was incorrect and caused k8s to throw an error
when trying to play the generated kube yaml.
Fix the annotation format to match the rules of k8s.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
See https://github.com/containers/conmon/pull/352
As of a few days ago, Ubuntu still hadn't built a fixed conmon.
Just skip the test until we get a fixed Ubuntu or until we
figure out a better solution to the test-something-RHEL8ish
problem.
UPDATE: WEIRD: this 'skip' triggered a baffling failure
on Ubuntu: the "Kubernetes only allows 63 characters"
warning message stopped appearing, on Ubuntu only, which
then caused the kube-generate tests to fail because they
actually checked for that. The message doesn't appear
because generate-kube is no longer spitting out a line
for org.opencontainers.image.base.digest/CONTAINER.
(Why this line is gone, I don't know, and choose not
to investigate). Solution: stop checking for the kube-63
warning. It's just not that important.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Since podman doesn't set/use the needed service env
variable, always set enableServiceLinks to false in
the generated kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
When a kube yaml has a volume set as empty dir, podman
will create an anonymous volume with the empty dir name and
attach it to the containers running in the pod. When the pod
is removed, the empy dir volume created is also removed.
Add tests and docs for this as well.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
add two new options to the keep-id user namespace option:
- uid: allow to override the UID used inside the container.
- gid: allow to override the GID used inside the container.
For example, the following command will map the rootless user (that
has UID=0 inside the rootless user namespace) to the UID=11 inside the
container user namespace:
$ podman run --userns=keep-id:uid=11 --rm -ti fedora cat /proc/self/uid_map
0 1 11
11 0 1
12 12 65525
Closes: https://github.com/containers/podman/issues/15294
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We keep getting flakes in tests that use port 5000. Try to
find and fix, by switching ports where possible, and locking
5000 when not possible (or not easy) to switch.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Compat: Treat already attached networks as a no-op
Applies only to containers in created state. Maintain error in running state.
Co-authored-by: Alessandro Rossi <al.rossi87@gmail.com>
Co-authored-by: Brent Baude <bbaude@redhat.com>
Co-authored-by: Jason T. Greene <jason.greene@redhat.com>
Signed-off-by: Alessandro Rossi <al.rossi87@gmail.com>
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
`podman-remote` and Libpod API does not supports build with
`--userns=auto` since `IDMappingOptions` were not implemented for API
and bindings, following PR implements passing `IDMappingOptions` via
bindings to API.
Closes: https://github.com/containers/podman/issues/15476
Signed-off-by: Aditya R <arajan@redhat.com>
Change only the compat API, so we don't force a breaking change
on Libpod API users.
Partial fix for #15485
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This finishes the removal of curls and exits.
Please please please, everyone, if you see a 'curl' or 'exit'
in any new PR, reject the PR and tell me immediately so I can
help the developer do it the proper way.
Also, removed some very-very-wrong USER/UID code. Both are
reserved variables in bash. You cannot override them.
Also, added a cleanup to a system-connection test. I wasted
a lot of time because my podman-remote stopped working, all
because I had run this test as part of something unrelated.
Also, found and fixed dangerously-broken timeout code.
Implemented a new mechanism for requiring a timeout.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Whole slew of bugs that got introduced while I wasn't paying
attention. Most of them are of the form "let's use hand-crafted
curl commands and do our own error checking and exit uncleanly
on error and leave the system in an unstable state". To be
fair, those were done because there was no existing mechanism
for uploading JSON files or somesuch. So, add one.
Signed-off-by: Ed Santiago <santiago@redhat.com>
using "slave" means that every mount operation on the host that
happens between the mount creation for `/host` and running `findmnt`
will be propagated to the container mount. To prevent new mounts on
the host to appear in the container thus invalidating the test we
have, just create the mount as private and use `/sys` as source as it
has multiple mounts on the top but less likely to get new mounts once
it is configured.
Closes: https://github.com/containers/podman/issues/15241
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
it is not a kernel bug.
Rootless users are not allowed to use non recursive bind mounts,
otherwise they would be able to uncover mounts that were not visible
before to them.
[CI:DOCS] it is just a comment fix.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add three new capabilities that would otherwise be reported as unknown.
Also add an e2e test making sure that `podman top` knows all
capabilities of the current kernel. I refrained from adding a system
test since this may blow up in gating tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Allow end users to preprocess default environment variables before
injecting them into container using `--env-merge`
Usage
```
podman run -it --rm --env-merge some=${some}-edit --env-merge
some2=${some2}-edit2 myimage sh
```
Closes: https://github.com/containers/podman/issues/15288
Signed-off-by: Aditya R <arajan@redhat.com>
Also, do a general cleanup of all the timeout code. Changes
include:
- Convert from int to *uint where possible. Timeouts cannot be
negative, hence the uint change; and a timeout of 0 is valid,
so we need a new way to detect that the user set a timeout
(hence, pointer).
- Change name in the database to avoid conflicts between new data
type and old one. This will cause timeouts set with 4.2.0 to be
lost, but considering nobody is using the feature at present
(and the lack of validation means we could have invalid,
negative timeouts in the DB) this feels safe.
- Ensure volume plugin timeouts can only be used with volumes
created using a plugin. Timeouts on the local driver are
nonsensical.
- Remove the existing test, as it did not use a volume plugin.
Write a new test that does.
The actual plumbing of the containers.conf timeout in is one line
in volume_api.go; the remainder are the above-described cleanups.
Signed-off-by: Matthew Heon <mheon@redhat.com>
`podman kube play` can create pods and containers from YAML
read from a URL poiniting to a YAML file.
For example: `podman kube play https://example.com/demo.yml`.
`podman kube down` can also teardown pods and containers created
from that YAML file by also reading YAML from a URL, provided the
YAML file the URL points to has not been changed or altered since
it was used to create pods and containers
Closes#14955
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Support inspecting image healthcheck using docker supported
`.Config.HealthCheck` by aliasing field to `.HealthCheck`
Now supports
```Console
podman image inspect -f "{{.Config.Healthcheck}}" imagename
```
Closes: https://github.com/containers/podman/issues/14661
Signed-off-by: Aditya R <arajan@redhat.com>
When an unsupported limit on cgroups V1 rootless systems
is requested, podman prints an warning message and
ignores the option/flag.
```
Target options/flags:
--cpu-period, --cpu-quota, --cpu-rt-period, --cpu-rt-runtime,
--cpus, --cpu-shares, --cpuset-cpus, --cpuset-mems, --memory,
--memory-reservation, --memory-swap, --memory-swappiness,
--blkio-weight, --device-read-bps, --device-write-bps,
--device-read-iops, --device-write-iops, --blkio-weight-device
```
Related to https://github.com/containers/podman/discussions/10152
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
the env vars are held in the spec rather than the config, so they need to be mapped manually. They are also of a different format so special handling needed to be added. All env from the parent container will now be passed to the clone.
resolves#15242
Signed-off-by: Charlie Doern <cdoern@redhat.com>
This exposed a nasty bug in our system-test setup: Ubuntu (runc)
was writing a scratch containers.conf file, and setting CONTAINERS_CONF
to point to it. This was well-intentionedly introduced in #10199 as
part of our long sad history of not testing runc. What I did not
understand at that time is that CONTAINERS_CONF is **dangerous**:
it does not mean "I will read standard containers.conf and then
override", it means "I will **IGNORE** standard containers.conf
and use only the settings in this file"! So on Ubuntu we were
losing all the default settings: capabilities, sysctls, all.
Yes, this is documented in containers.conf(5) but it is such
a huge violation of POLA that I need to repeat it.
In #14972, as yet another attempt to fix our runc crisis, I
introduced a new runc-override mechanism: create a custom
/etc/containers/containers.conf when OCI_RUNTIME=runc.
Unlike the CONTAINERS_CONF envariable, the /etc file
actually means what you think it means: "read the default
file first, then override with the /etc file contents".
I.e., we get the desired defaults. But I didn't remember
this helpers.bash workaround, so our runc testing has
actually been flawed: we have not been testing with
the system containers.conf. This commit removes the
no-longer-needed and never-actually-wanted workaround,
and by virtue of testing the cap-drops in kube generate,
we add a regression test to make sure this never happens
again.
It's a little scary that we haven't been testing capabilities.
Also scary: this PR requires python, for converting yaml to json.
I think that should be safe: python3 'import yaml' and 'json'
works fine on a RHEL8.7 VM from 1minutetip.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Run machine tests on every PR as label-driven machine test
triggering is currently hard to predict and debug.
Co-authored-by: Ed Santiago <santiago@redhat.com>
Co-authored-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
Accept a --amend flag in `podman manifest create`, and treat
`--insecure` as we would `--tls-verify=false` in `podman manifest`'s
"add", "create", and "push" subcommands.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Followup to #14613, which was never actually tested until this
week in RHEL8 gating tests (see issue #15337).
* add missing backslash in '|' expression
* allow extra text after error (e.g., "invalid argument")
No way to test this until it makes its way into RHEL8,
so, fingers crossed.
Signed-off-by: Ed Santiago <santiago@redhat.com>
--cidfile : Read container ID from the specified file and restart the container.
--filter : restart the filtered container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
"podman kube generate" creates Kubernetes YAML from Podman containers,
pods or volumes. Users will still be able to use "podman generate
kube" as an alias of "kube generate".
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
`podman-remote manifest push` has shown absolutely no progress at all.
Fix that by doing the same as the remote-push code does.
Like remote-push, `quiet` parameter is true by default for backwards
compatibility.
Signed-off-by: Naoto Kobayashi <naoto.kobayashi4c@gmail.com>
Integrate sd-notify policies into `kube play`. The policies can be
configured for all contianers via the `io.containers.sdnotify`
annotation or for indidivual containers via the
`io.containers.sdnotify/$name` annotation.
The `kube play` process will wait for all containers to be ready by
waiting for the individual `READY=1` messages which are received via
the `pkg/systemd/notifyproxy` proxy mechanism.
Also update the simple "container" sd-notify test as it did not fully
test the expected behavior which became obvious when adding the new
tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The notify socket can now either be specified via an environment
variable or programatically (where the env is ignored). The
notify mode and the socket are now also displayed in `container inspect`
which comes in handy for debugging and allows for propper testing.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
implement new ssh interface into podman
this completely redesigns the entire functionality of podman image scp,
podman system connection add, and podman --remote. All references to golang.org/x/crypto/ssh
have been moved to common as have native ssh/scp execs and the new usage of the sftp package.
this PR adds a global flag, --ssh to podman which has two valid inputs `golang` and `native` where golang is the default.
Users should not notice any difference in their everyday workflows if they continue using the golang option. UNLESS they have been using an improperly verified ssh key, this will now fail. This is because podman was incorrectly using the
ssh callback method to IGNORE the ssh known hosts file which is very insecure and golang tells you not yo use this in production.
The native paths allows for immense flexibility, with a new containers.conf field `SSH_CONFIG` that specifies a specific ssh config file to be used in all operations. Else the users ~/.ssh/config file will be used.
podman --remote currently only uses the golang path, given its deep interconnection with dialing multiple clients and urls.
My goal after this PR is to go back and abstract the idea of podman --remote from golang's dialed clients, as it should not be so intrinsically connected. Overall, this is a v1 of a long process of offering native ssh, and one that covers some good ground with podman system connection add and podman image scp.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Skip some newly added test for remote and modify error output of a test
case which is reporter early in case of podman.
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
if an explicit mapping is specified, do not accept `--userns` since it
overriden to "private".
Closes: https://github.com/containers/podman/issues/15233
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
implement a new command `podman generate spec` which can formulate a json specgen to be consumed by both the pod
and container creation API.
supported flags are
--verbose (default true) print output to the terminal
--compact print the json output in a single line format to be piped to the API
--filename put the output in a file
--clone rename the pod/ctr in the spec so it won't conflict w/ an existing entity
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Improve the error message when attempting to remove an image that is in
use by an external/build container. Prior, the error only indicated
that the image was in use but did not aid in resolving the issue.
Fixes: #15006
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Tying filtering logic for podman stop and start to same place in getContainersAndInputByContext() to reduce code redundancy
Signed-off-by: Karthik Elango <kelango@redhat.com>
Drop a comment on using `chcon` to let the local rollback test pass.
It took me a while to understand why the test failed and future souls
may appreciated the extra breadcrumb.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Secret was populating a generated kube as `null`. Add omitempty
so that when the volume source is not a secret, we do not print unnecessary info
resolves#15156
Signed-off-by: Charlie Doern <cdoern@redhat.com>
The "podman kube down" reads in a structured file of
Kubernetes YAML and removes pods based on the Kubernetes kind described in the YAML,
similiar to "podman play kube --down". Users will still be able to use
"podman play kube --down" and "podman kube play --down" to
perform the same function.
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
- Allow creating sigstore signatures via --sign-by-sigstore-private-key .
Like existing --sign-by, it does not work remote (in this case
because we would have to copy the private key to the server).
- Allow passing a passphrase (which is mandatory for sigstore private keys)
via --sign-passphrase-file; if it is not provided, prompt interactively.
- Also, use that passphrase for --sign-by as well, allowing non-interactive
GPG use. (But --sign-passphrase-file can only be used with _one of_
--sign-by and --sign-by-sigstore-private-key.)
Note that unlike the existing code, (podman build) does not yet
implement sigstore (I'm not sure why it needs to, it seems not to
push images?) because Buildah does not expose the feature yet.
Also, (podman image sign) was not extended to support sigstore.
The test for this follows existing (podman image sign) tests
and doesn't work rootless; that could be improved by exposing
a registries.d override option.
The test for push is getting large; I didn't want to
start yet another registry container, but that would be an
alternative. In the future, Ginkgo's Ordered/BeforeAll
would allow starting a registry once and using it for two
tests.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
... primarily so that it can support OCI artifacts.
2.8 already seems to exist in the repo.
This requires changing WaitContainerReady to also check
stderr (ultimately because docker/distribution was
updated to a more recent sirupsen/logrus, which logs
by default to stderr instead of stdout).
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
... instead of hard-coding a copy of the value.
Notably this makes hack/podman_registry actually
support the documented -i option.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Also Fix usage of flag "--compression-format" for remote "podman image push". Fix usage of flags "--format", "--remove-signatures" in remote "podman manifest push".
Closes#15109.
Signed-off-by: Romain Geissler <romain.geissler@amadeus.com>
htpasswd is no longer included in docker.io/library/distribution
after 2.7.0, per https://github.com/docker/distribution-library-image/issues/107 ,
and we want to upgrade to a recent version.
At least system tests currently execute htpasswd from the OS,
so it seems that it is likely to be available.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
new file: test/e2e/config_arm64.go
Tests that fail on aarch64 have been skipped with
`skip_if_aarch64`.
Co-authored-by: Chris Evich <cevich@redhat.com>
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
This bug is reproduced when we execute the following command:
1. podman manifest add <manifest list> <images exist on local storage>
2. podman manifest push --rm <manifest list> dir:<directory>
If pushing succeeds, it is expected to remove only a manifest list.
However, manifest list remains on local storage and images are removed.
This commit fixes `podman manifest push --rm` to remove only a manifest list.
And, supports `manifest push --rm option` in remote environment,
like host environment.
Fixes: https://github.com/containers/podman/issues/15033
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
This Patch will cause podman COMMAND rm --force bogus not fail
This is how Docker works, so Podman should follow this to allow existing
scripts to convert from Docker to Podman.
Fixes: #14612
Oprignal version of this patch came from wufan 1991849113@qq.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Option defaults in API must be the same as in CLI.
```
% podman image push --help
% podman image pull --help
% podman manifest push --help
% podman image search --help
```
All of these CLI commands them have --tls-verify=true by default:
```
--tls-verify require HTTPS and verify certificates when accessing the registry (default true)
```
As for `podman image build`, it doesn't have any means to control
`tlsVerify` parameter but it must be true by default.
Signed-off-by: Vladimir Kochnev <hashtable@yandex.ru>
Some refer to issues that are closed. Remove them.
Some are runc bugs that will never be fixed. Say so, and remove
the FIXME.
One (bps/iops) should probably be fixed. File an issue for it, and
update comment to include the issue# so my find-obsolete-skips script
can track it.
And one (rootless mount with a "kernel bug?" comment) is still
not fixed. Leave the skip, but add a comment documenting the symptom.
Signed-off-by: Ed Santiago <santiago@redhat.com>
for podman pod create, when we are not sharing any namespaces there is no point for the infra container.
This is especially true since resources have also been decoupled from the container recently.
handle this on the cmd level so that we can still create infra if set explicitly
resolves#15048
Signed-off-by: Charlie Doern <cdoern@redhat.com>
network and container prune could not handle the label!=... filter. vendor in c/common to fix this and
add some podman level handling to make everything run smoothly
resolves#14182
Signed-off-by: Charlie Doern <cdoern@redhat.com>
pod resource limits introduced a regression where `FinishThrottleDevices` was not called for create/run
Signed-off-by: Charlie Doern <cdoern@redhat.com>
I honestly do not understand all this extra option parsing here but
there is really no reason to exclude the option for remote, all the
other global options are also set there.
This fixes a problem with mixed cni/netavark use because the option was
unset.
Fixes#15017
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
...and enable the at-test-time confirmation, the one that
double-checks that if CI requests runc we actually use runc.
This exposed a nasty surprise in our setup: there are steps to
define $OCI_RUNTIME, but that's actually a total fakeout!
OCI_RUNTIME is used only in e2e tests, it has no effect
whatsoever on actual podman itself as invoked via command
line such as in system tests. Solution: use containers.conf
Given how fragile all this runtime stuff is, I've also added
new tests (e2e and system) that will check $CI_DESIRED_RUNTIME.
Image source: https://github.com/containers/automation_images/pull/146
Since we haven't actually been testing with runc, we need
to fix a few tests:
- handle an error-message change (make it work in both crun and runc)
- skip one system test, "survive service stop", that doesn't
work with runc and I don't think we care.
...and skip a bunch, filing issues for each:
- #15013 pod create --share-parent
- #15014 timeout in dd
- #15015 checkpoint tests time out under $CONTAINER
- #15017 networking timeout with registry
- #15018 restore --pod gripes about missing --pod
- #15025 run --uidmap broken
- #15027 pod inspect cgrouppath broken
- ...and a bunch more ("podman pause") that probably don't
even merit filing an issue.
Also, use /dev/urandom in one test (was: /dev/random) because
the test is timing out and /dev/urandom does not block. (But
the test is still timing out anyway, even with this change)
Also, as part of the VM switch we are now using go 1.18 (up
from 1.17) and this broke the gitlab tests. Thanks to @Luap99
for a quick fix.
Also, slight tweak to #15021: include the timeout value, and
reword message so command string is at end.
Also, fixed a misspelling in a test name.
Fixes: #14833
Signed-off-by: Ed Santiago <santiago@redhat.com>
added the following flags and handling for podman pod create
--memory-swap
--cpuset-mems
--device-read-bps
--device-write-bps
--blkio-weight
--blkio-weight-device
--cpu-shares
given the new backend for systemd in c/common, all of these can now be exposed to pod create.
most of the heavy lifting (nearly all) is done within c/common. However, some rewiring needed to be done here
as well!
Signed-off-by: Charlie Doern <cdoern@redhat.com>
`podman-remote push` has shown absolutely no progress at all. Fix that
by doing essentially the same as the remote-pull code does.
The get-free-out-of-jail-card for backwards compatibility is to let the
`quiet` parameter default to true. Since the --quioet flag wasn't
working before either, older Podman clients do not set it.
Also add regression tests to make sure we won't regress again.
Fixes: #11554Fixes: #14971
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The network backend always has default config in memory so there is no
need to copy it. Also netavark cannot use it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Docker uses "bridge" as default network name so some tools expect this
to work with network list or inspect. To fix this we change "bridge" to
the podman default ("podman") name.
Fixes#14983
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
By vendoring the fixes from containers/image. Also add a test (thanks
@edsantiago) to make sure we won't regress in the future again.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
add support for both creating a secret using yaml and mounting a secret as a volume given a yaml file.
Kubernetes secrets have a different structure than podman and therefore have to be handeled differently.
In this PR, I have introduced the basic usecases of kube secrets with more implementations like env secrets
to come!
resolves#12396
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Update the init container type default to once instead
of always to match k8s behavior.
Add a new annotation that can be used to change the init
ctr type in the kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
--latest : pause/unpause the latest container.
--filter : pause/unpause the filtered container.
--cidfile : Read container ID from the specified file and pause/unpause the container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Followup to #14957, which added a new test that doesn't
actually belong in the 250-systemd.bats file. It was
copy-pasted from another test that doesn't belong there.
Move both tests to a new .bats file, because (1) they
need a custom cleanup, and (2) one of the tests should
very definitely run under podman-remote, and the 250
bats file has a global skip_if_remote().
Signed-off-by: Ed Santiago <santiago@redhat.com>
As you run --sync, please update this commit message with your
actual changes.
Changes since 2022-06-14:
- apply-podman-deltas: (minor) buildah 4057 changed the name
of a test; make corresponding change here
- apply-podman-deltas: buildah 4071 adds a new OCI-hook
test that's failing in remote. Skip it.
- apply-podman-deltas: buildah 4096 changed an error message
- apply-podman-deltas: buildah 4097 added a test that doesn't
work with podman-remote
- run-buildah-bud-tests: only run 'sudo --validate' if we
need to sudo later (for running tests). Otherwise, same
thing: I run the treadmill script, step away, and come
back to an unnecessary sudo prompt.
- system tests: the new containers-storage changes some
error messages; fix tests to reflect that. (And, unrelated,
fix a red cleanup warning)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Docker supports -H and --host for specify the listening socket. Podman
should support them also in order to match the CLI.
These will not be documented since Podman defaults to using the
--url option.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Filter flag is added for podman stop and podman --remote stop. Filtering logic is implemented in
getContainersAndInputByContext(). Start filtering can be manipulated to use this logic as well to limit redundancy.
Signed-off-by: Karthik Elango <kelango@redhat.com>
I added the shorthand option for `podman pull --all-tags`. Like Docker,
Podman can now do `podman pull -a`.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
This is a follow up to fix some of the apiv2
tests related to "podman kube play" while also
removing reduntant system tests.
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
The "podman kube play" command is designed to be a replacement for the
"podman play kube" command.
It performs the same function as "play kube" while also still working with the same flags and options.
The "podman play kube" command is still functional as an alias of "kube play".
Closes#12475
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
As part of fix for https://github.com/openshift/imagebuilder/issues/231
`FROM` does not expands `ARGS` which are not declared so
`TARGETPLATFORM`
Note: I think a patch should be added at imagebuilder to allow using
inbuilt ARGS in FROM without declaring it as well but it is something
to be discussed so lets declare it manually in our tests
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
* Correct spelling and typos.
* Improve language.
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
If a pod is created without net sharing, allow adding
separate ports for each container to the kube yaml
and also set the pod level hostname correctly if the
uts namespace is not being shared.
Add a warning if the default namespace sharing options
have been modified by the user.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Followup to #14845: use defer(), not fragile global context,
to stop registry and clean up temporary envariable. Thanks
to mitr for the suggestion.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Podman wait should not be defaulting to just stopped. By default
wait API waits for stopped and exited. We should not override this on
the client side.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Refactored the networkPrune function to improve readability.
This commit changes the `networkPrune` function to
use the `PrintNetworkPruneResults` function.
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
manifest_test:authenticated_push() is the final test left to
fix before merging #14397. The reason it's failing _seems_ to be
that podman is running with a mix of netavark and CNI, and
that _seems_ to be because this test invokes hack/podman-registry
which invokes plain podman without whatever options used in e2e.
Starting a registry directly from the test is insane: there is
no reusable code for doing that (see login_logout_test.go and
push_test.go. Yeesh.)
Solution: set $PODMAN, by inspecting the podmanTest object
which includes both a path and a list of options. podman-registry
will invoke that. (It will also override --root and --runroot.
This is the desired behavior).
Also: add cleanup. If auth-push test fails, stop the registry.
Also: add a sanity check to podman-registry script, have it
wait for the registry port to activate. Die if it doesn't.
That could've saved us a nice bit of debugging time.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Wrong variable. And, wrong index range. And, wrong bash
syntax for extracting end_port. And, add explicit check
for valid range, because die() inside 'foo=$(...)' will not
actually die. And, refactor some confusing code. And,
reformat/clean up a confusing and too-wide comment.
Fixes: #14854
Signed-off-by: Ed Santiago <santiago@redhat.com>
somehow, #14501 got through CI even though the remote tests fail. The testa are failing
due to the PodSpecGenerator not containing the UTSNs entitiy and infra's spec is not yet allowed to be accessed remotely
[NO NEW TESTS NEEDED]
resolves#14847
Signed-off-by: Charlie Doern <cdoern@redhat.com>
A number of standard image names were lower-case, leading to
confusion in code such as:
registry := podman(... , "-n", "registry", registry, ...)
^--- variable ^---- constant
Fix a number of those to be capitalized and with _IMAGE suffix:
registry := podman(..., REGISTRY_IMAGE
Signed-off-by: Ed Santiago <santiago@redhat.com>
- containerInspect compat API expects field value PrefixLen
instead of PrefixLength for type Address for SecondaryIPAddresses
- Add tests for network part of containerInspect compat api
Closes: containers#14674
Signed-off-by: 🤓 Mostafa Emami <mustafaemami@gmail.com>
Update the podman pod unpause to only show the paused
containers with autocomplete.
Fix a typo in the help command.
Update the unpause function to only attempt an unpause
on pasued pods instead of all the pods.
Update the tests accordingly.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
add support for the --uts flag in pod create, allowing users to avoid
issues with default values in containers.conf.
uts follows the same format as other namespace flags:
--uts=private (default), --uts=host, --uts=ns:PATH
resolves#13714
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Previously, if a container had healthchecks disabled in the
docker-compose.yml file and the user did a `podman inspect <container>`,
they would have an incorrect output:
```
"Healthcheck":{
"Test":[
"CMD-SHELL",
"NONE"
],
"Interval":30000000000,
"Timeout":30000000000,
"Retries":3
}
```
After a quick change, the correct output is now the result:
```
"Healthcheck":{
"Test":[
"NONE"
]
}
```
Additionally, I extracted the hard-coded strings that were used for
comparisons into constants in `libpod/define` to prevent a similar issue
from recurring.
Closes: #14493
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Previously, the following network block did not update using
docker-compose:
```
networks:
default:
driver: bridge
driver_opts:
mtu: 9000
```
In the API, the network options were previously not being handled when the
network was being created. I translated the docker options into podman
options, and added the options to the network.
When doing `podman network inspect <network>`, the results now contain
`"mtu": "9000"`
Fixes: #14482
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Previously, `podman system df --format "{{json .}}"` would not output
`Size` and `Reclaimable` like `podman system df` would.
```
{"Type":"Images","Total":5,"Active":0,"Size":39972240,"Reclaimable":39972240}
{"Type":"Containers","Total":0,"Active":0,"Size":0,"Reclaimable":0}
{"Type":"Local Volumes","Total":0,"Active":0,"Size":0,"Reclaimable":0}
```
Closes: #14769
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Make sure `Sync()` handles state transitions and exit codes correctly.
The function was only being called when batching which could render
containers in an unusable state when running concurrently with other
state-altering functions/commands since the state must be re-read from
the database before acting upon it.
Fixes: #14761
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
there is no need to use such long sleep intervals for such cheap
operations like opening a connection or stat'ing a file.
Also make WaitForService() honor defaultWaitTimeout.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if the connection is successfull then return immediately instead of doing
all the iterations. It also solves a problem where connections are
leaked since there are multiple Dial but only one Close.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Following PR adds support for running containers from a manifest list
present on localstorage. Before this PR podman only supports running
containers from valid images but not from manifest list.
So `podman run -it --platform <some> <manifest-list> command` should
become functional now and users should be able to resolve images on the
bases of provided `--platform` string.
Example
```
podman manifest create test
podman build --platform linux/amd64,linux/arm64 --manifest test .
podman run --rm --platform linux/arm64/v8 test uname -a
```
Closes: https://github.com/containers/podman/issues/14773
Signed-off-by: Aditya R <arajan@redhat.com>
The retry logic in digshort() did not work because dig always exits with
0 even when the domain name is not found. To make it work we have to
check the standard output.
We work on fixing the underlying issue in aardvark/netavark but
this will take more time.
Fixes#14173Fixes#14171
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
the test is not doing what it believes to do. The containers are not
supposed to be joining the infra container cgroup.
In addition, the result is validated only on cgroup v1 systems (that
are not used in the CI).
We may want to add it back, or a variant of it, once the
--device-read-bps option applies to the pod parent cgroup.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
using the new resource backend, implement podman pod create --memory which enables
users to modify memory.max inside of the parent cgroup (the pod), implicitly impacting all
children unless overriden
Signed-off-by: Charlie Doern <cdoern@redhat.com>
PR containers/podman/pull/14449 had an outdated base. Merging it broke
builds.
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When mounting paths as overlay mounts we end up passing source as is to
lowerdir options, resolve all relative paths in such cases for overlay
mounts.
Closes: https://github.com/containers/podman/issues/14797
Signed-off-by: Aditya R <arajan@redhat.com>
Fix the parse for the cgroup devices rule to correctly handle the
wildcard syntax for the device major.
Also make sure the device major and minor are not negative numbers.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
With the upcoming plans of introducing a podman-kube command with
various subcommands, rename the podman-play-kube systemd template
to podman-kube before releasing it.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
ImagesBatchRemoval and ImageRemoval now honors and accepts
`LookupManifest` parameter which further tells libimage to resolve to
manifest list if it exists instead of actual image.
Following PR also makes `podman-remote manifest rm` functional which was
broken till now.
Closes: https://github.com/containers/podman/issues/14763
Signed-off-by: Aditya R <arajan@redhat.com>
Podman Machine crashes if run as root. When creating the machine, we write the ignition so that the UID of the core user matches the UID of the user on the host. We by default, create the root user on the machine with UID 0. If the user on the host is root, the core UID and the Root UID collide, causing a the VM not to boot.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
Runtime verification test for container checkpoint with export
used the default runtime for test which causes test to always
pass. Problem rises when using non-default runtime, then doing
a restore. This test forcse using a non-default runtime during
container creation.
Edge case:
1. Default runtime is crun
2. Container is created with runc
3. Checkpoint without setting --runtime into archive
4. Restore without setting --runtime from archive
It should be expected that podman identifies runtime from the
checkpoint archive.
Signed-off-by: Zeyad Yasser <zeyady98@gmail.com>
currently, podman system df incorrectly calculates the reclaimable storage for
volumes, using a cumulative reclaimable variable that is incremented and placed into each
report entry causing values to rise above 100%.
Switch this variables to be in the context of the loop, so it resets per volume just like the size variable does.
resolves#13516
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Some background for this PR is in discussion #14641. In short, ever so often a container inspect will return a `status.status` of `initialized` from the Docker compat socket.
From the discussion I found these lines which tries to fix a "configured" status to "created".
c936d1e611/pkg/api/handlers/compat/containers.go (L291-L294)
However, commit 141de86862 (Revamp Libpod state strings for Docker compat) removed the "configured" return value from the `String()` method called on line 291 above. Thus, making the `if` check redundant as it will never hit. But the same commit also introduces a return for "initialized" which this `if` should probably have been adapted for.
Signed-off-by: Pieter Engelbrecht <pieter@shuttle.rs>
add support for podman-remote image scp as well as direct access via the API. This entailed
a full rework of the layering of image scp functions as well as the usual API plugging and type creation
also, implemented podman image scp tagging. which makes the syntax much more readable and allows users t tag the new image
they are loading to the local/remote machine:
allow users to pass a "new name" for the image they are transferring
`podman tag` as implemented creates a new image im `image list` when tagging, so this does the same
meaning that when transferring images with tags, podman on the remote machine/user will load two images
ex: `podman image scp computer1::alpine computer2::foobar` creates alpine:latest and localhost/foobar on the remote host
implementing tags means removal of the flexible syntax. In the currently released podman image scp, the user can either specify
`podman image scp source::img dest::` or `podman image scp dest:: source::img`. However, with tags this task becomes really hard to check
which is the image (src) and which is the new tag (dst). Removal of that streamlines the arg parsing process
Signed-off-by: Charlie Doern <cdoern@redhat.com>
the "pod ps" command first retrieves the list of all pods, then
iterates over the list to inspect each pod. This introduce a race
since a pod could be deleted in the meanwhile by another process.
Solve it by ignoring the define.ErrNoSuchPod error.
Closes: https://github.com/containers/podman/issues/14736
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add two new options to the volume create command: copy and nocopy.
When nocopy is specified, the files from the container image are not
copied up to the volume.
Closes: https://github.com/containers/podman/issues/14722
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Previously, health status events were not being generated at all. Both
the API and `podman events` will generate health_status events.
```
{"status":"health_status","id":"ae498ac3aa6c63db8b69a37583a6eae1a9cefbdbdbeeadcf8e1d66d745f0df63","from":"localhost/healthcheck-demo:latest","Type":"container","Action":"health_status","Actor":{"ID":"ae498ac3aa6c63db8b69a37583a6eae1a9cefbdbdbeeadcf8e1d66d745f0df63","Attributes":{"containerExitCode":"0","image":"localhost/healthcheck-demo:latest","io.buildah.version":"1.26.1","maintainer":"NGINX Docker Maintainers \u003cdocker-maint@nginx.com\u003e","name":"healthcheck-demo"}},"scope":"local","time":1656082205,"timeNano":1656082205882271276,"HealthStatus":"healthy"}
```
```
2022-06-24 11:06:04.886238493 -0400 EDT container health_status ae498ac3aa6c63db8b69a37583a6eae1a9cefbdbdbeeadcf8e1d66d745f0df63 (image=localhost/healthcheck-demo:latest, name=healthcheck-demo, health_status=healthy, io.buildah.version=1.26.1, maintainer=NGINX Docker Maintainers <docker-maint@nginx.com>)
```
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
The test must ensure that all ports in the range are free not just
the first. This flakes often because port 5355 is always in use by
systemd-resolved on fedora.
Fixes#14716
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
currently, setting any sort of resource limit in a pod does nothing. With the newly refactored creation process in c/common, podman ca now set resources at a pod level
meaning that resource related flags can now be exposed to podman pod create.
cgroupfs and systemd are both supported with varying completion. cgroupfs is a much simpler process and one that is virtually complete for all resource types, the flags now just need to be added. systemd on the other hand
has to be handeled via the dbus api meaning that the limits need to be passed as recognized properties to systemd. The properties added so far are the ones that podman pod create supports as well as `cpuset-mems` as this will
be the next flag I work on.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
This bug was introduced in https://github.com/containers/podman/pull/8906.
When we use 'podman rm/restart/stop/kill etc...' command to
the container running with --rm, the OCI runtime directory
remains at /run/<runtime name> (root user) or
/run/user/<user id>/<runtime name> (rootless user).
This bug could cause other bugs.
For example, when we checkpoint the container running with
--rm (podman checkpoint --export) and restore it
(podman restore --import) with crun, error message
"Error: OCI runtime error: crun: container `<container id>`
already exists" is outputted.
This error is caused by an attempt to restore the container with
the same container ID as the remaining OCI runtime's container ID.
Therefore, I fix that the cleanupRuntime() function runs to
remove the OCI runtime directory,
even if the container has already been removed by --rm option.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Since it may be a while before we get a true fix: add a
workaround for podman-remote checkpoint tests, in which
we pause until the 'run --rm' container is truly truly gone.
I've tried to make it as easy as possible to clean up
the workaround code once the bug is fixed.
Oh, also, remove "-it" from a podman-run. It makes no sense
and only results in nasty orange warning messages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Libpod requires that all volumes are stored in the libpod db. Because
volume plugins can be created outside of podman, it will not show all
available plugins. This podman volume reload command allows users to
sync the libpod db with their external volume plugins. All new volumes
from the plugin are also created in the libpod db and when a volume from
the db no longer exists it will be removed if possible.
There are some problems:
- naming conflicts, in this case we only use the first volume we found.
This is not deterministic.
- race conditions, we have no control over the volume plugins. It is
possible that the volumes changed while we run this command.
Fixes#14207
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add 4 new subcommands to the testvol binary, instead of just serving the
volume api it now also can create/list/remove plugins. This is required
to test new functionality where volumes are create outside of podman in
the plugin. Podman should then be able to pick up the new volumes.
The new testvol commands are:
- serve: serve the podman api like the the testvol command before
- create: create a volume with the given name
- list: list all volume names
- remove: remove the volume with the given name
Also make a small update to the testvol Containerfile so that it can
build correctly.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Update the golang verion for the testvol image to the latest version
1.18. This requires us to build with GO111MODULE=off.
Use the FQDN to prevent the shortnames prompt.
Also add --network none to the podman build command to make sure we are
only using the copied deps and nothing else.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I think it is confusion to have this Containerfile in the repo root. It
is used for the tests only so we should move it into the same dir.
Also adapt the Makefile target to use the new path and add the current
date as tag instead of using latest which can break CI easily when we
have to update the image.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman image scp and podman system connection tests were querying an existing website during testing.
Change to a URL that will never exist given an improper domain extension
also just generally clean up a few things in both scp and connection testing
resolves#14699
Signed-off-by: Charlie Doern <cdoern@redhat.com>
We should just silently fall through. The log was flooding the
system-service logs when running Gitlab runner.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
podman currently does not support relative volume paths. Add parsing for relative paths in specgen, converting
whatever volume was given to an absolute path.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
* Replace "setup", "lookup", "cleanup", "backup" with
"set up", "look up", "clean up", "back up"
when used as verbs. Replace also variations of those.
* Improve language in a few places.
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
add the ability to filter networks by their dangling status via:
`network ls --filter dangling=true/false`
Fixes: #14595
Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
use the memory limit specified for the container instead of reading it
from the cgroup. It is not reliable to read it from the cgroup since
the container could have been moved to a different cgroup and in
general the OCI runtime might create a sub-cgroup (like crun does).
Closes: https://github.com/containers/podman/issues/14676
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
expose the --shm-size flag to podman pod create and add proper handling and inheritance
for the option.
resolves#14609
Signed-off-by: Charlie Doern <cdoern@redhat.com>
When we return no containers we just return `[]` but we still have to keep
the content type header `application/json` so external tools can correctly
parse the output.
Fixes#14647
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman -h` currently returns an error:
`Error: pflag: help requested`
This bug was introduced in 44d037898e, the problem is that we wrap the
error and cobra lib checks with `==` for this one and not errors.Is().
I have a PR upstream to fix this but for now this also works.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
With runc 1.1, we have the following failure:
# #| FAIL: podman emits useful diagnostic on failure
# #| expected: 'Error.*: OCI runtime error: .*: failed to set /proc/self/attr/keycreate on procfs' (using expr)
# #| actual: 'Error: OCI runtime error: runc: runc create failed: unable to start container process: error during container init: write /proc/self/attr/keycreate: invalid argument'
which is caused by the fact that runc 1.1 uses newer opencontainers/selinux
package, which changes custom errors to standard os.PathError instances (so
that they can be unwrapped if needed).
Fix the test case accordingly.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Changes:
- use --timestamp option to produce 'created' stamps
that can be reliably tested in the image-history test
- podman now supports manifest & multiarch run, so we
no longer need buildah
- bump up base alpine & busybox images
This turned out to be WAY more complicated than it should've been,
because:
- alpine 3.14 fixed 'date -Iseconds' to include a colon in
the TZ offset ("-07:00", was "-0700"). This is now consistent
with GNU date's --iso-8601 format, yay, so we can eliminate
a minor workaround.
- with --timestamp, all ADDed files are set to that timestamp,
including the custom-reference-timestamp file that many tests
rely on. So we need to split the build into two steps. But:
- ...with a two-step build I need to use --squash-all, not --squash, but:
- ... (deep sigh) --squash-all doesn't work with --timestamp (#14536)
so we need to alter existing tests to deal with new image layers.
- And, long and sordid story relating to --rootfs. TL;DR that option
only worked by a miracle relating to something special in one
specific test image; it doesn't work with any other images. Fix
seems to be complicated, so we're bypassing with a FIXME (#14505).
And, unrelated:
- remove obsolete skip and workaround in run-basic test (dating
back to varlink days)
- add a pause-image cleanup to avoid icky red warnings in logs
Fixes: #14456
Signed-off-by: Ed Santiago <santiago@redhat.com>
Update to the latest golangci-lint version. v1.46 added new linters.
I disabled nonamedreturns and exhaustruct since they enforce a certain
code style and using them would require big changes to the code base.
The nosprintfhostport is new and I fixed one problem in the tests. While
the test itself is fine because it uses ipv4 only the linter still looks
good because the sprintf use will fail for ipv6 addresses.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I noticed 'rmi -a' in a test. I tried to fix it. Hilarity ensued.
'rmi -a' is evil: it forces a fresh pull of our test image,
which in turn almost guarantees a flake some day. We avoid
it, but once in a while it slips in.
While fixing it, I noticed a bevy of other problems that
needed cleanup.
Signed-off-by: Ed Santiago <santiago@redhat.com>
commit 1951ff168a introduced a check so
that conmon is not moved to a new cgroup when podman is running inside
of a systemd service. This is helpful to integrate podman in systemd
so that the spawned conmon lives in the same cgroup as the service
that created it.
Unfortunately this breaks when podman daemon is running in a systemd
service since the same check is in place thus all the conmon processes
end up in the same cgroup as the podman daemon. When the podman
daemon systemd service stops the conmon processes are also terminated
as well as the containers they monitor.
Improve the check to exclude podman running as a daemon.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2052697
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Commit 5fa6f686db added a regression which was fixed in eb71712626.
Apply the same fix again to prevent a panic and return a proper error
instead.
To not regress again I added a e2e test which makes sure we do not panic.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Sigh. Buildah PR https://github.com/containers/buildah/pull/3368
changed 'bud' to 'build' in tests. Podman #11585 well-intentionedly
did the same for run-buildah-bud tests ... but did so by *replacing*
'bud' with 'build', not by *adding* 'build' to the list of commands
handled by podman-build. Hence, all tests invoking 'run_buildah bud'
have been completely untested since then.
This remedies that, and deals with all the fallout. Principal among
which is the discovery that our exit-code changes are no longer
necessary: that thing we did where buildah exit status 1 or 2 became
podman exit status 125? That no longer applies. podman now exits
with the same status as buildah. This simplifies our diffs, and
lets us enable a bunch more tests.
Also:
- in run-buildah-bud-tests script, run 'sudo --validate' early on.
Reason: otherwise, the sudo step happens a few minutes after
the script starts (after the git-pull), by which time the user
may have stepped away to get coffee, then comes back ten or twenty
minutes later to find a stupid sudo prompt and no tests run.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This would've caught a regression that #14549 had to fix.
Let's try to prevent the next regression.
This requires some hackery to get namespaces initialized
before the service is started; otherwise the service itself
initializes namespaces, which basically ends up with a
server process that runs forever.
Also: in stop_service(), reset service_pid, because that's
the correct thing to do.
Also: add some debug statements to try to figure out a
CI failure. (And leave them in place, because they might
be useful for future problems).
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix bad design decision (mine) by adding a simple usage check to 'skip'
and 'skip_if_remote' functions: if invoked without test-name args,
fail loudly and immediately.
Background: yeah, their usage is not intuitive. Making the first arg
be a comment helps with _reading_ the code, but not _writing_ new
additions. A developer in a hurry could write "skip this-test" and,
until now, that would be a silent NOP.
Tested by adding broken skip/skip_if_remote calls inline; I confirm
that the line number and funcname usage is correct.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The nolintlint linter does not deny the use of `//nolint`
Instead it allows us to enforce a common nolint style:
- force that a linter name must be specified
- do not add a space between `//` and `nolint`
- make sure nolint is only used when there is actually a problem
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
if /run is on a volume do not create the file /run/.containerenv as it
would leak outside of the container.
Closes: https://github.com/containers/podman/issues/14577
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is an enhancement for the podman system prune feature.
In this issue, it is mentioned that 'network prune' should be
wired into 'podman system prune'
https://github.com/containers/podman/issues/8673
Therefore, I add the function to remove unused networks.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Changes since 2022-05-31:
- add --omit-history option (buildah PR 4028)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
command
Previously, if a container was not running, and the user ran the `podman
stats` command, an error would be reported: `Error: container state
improper`.
Podman now reports stats as the fields' default values for their
respective type if the container is not running:
```
$ podman stats --no-stream demo
ID NAME CPU % MEM USAGE / LIMIT MEM % NET IO BLOCK IO PIDS CPU TIME AVG CPU %
4b4bf8ce84ed demo 0.00% 0B / 0B 0.00% 0B / 0B 0B / 0B 0 0s 0.00%
```
Closes: #14498
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
implement podman pod clone, a command to create an exact copy of a pod while changing
certain config elements
current supported flags are:
--name change the pod name
--destroy remove the original pod
--start run the new pod on creation
and all infra-container related flags from podman pod create (namespaces etc)
resolves#12843
Signed-off-by: cdoern <cdoern@redhat.com>
I don't see a reason why we don't support --remove-signatures
from remote push, so adding support.
Fixes: https://github.com/containers/podman/issues/14558
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a new `--overwrite` flag to `podman cp` to allow for overwriting in
case existing users depend on the behavior; they will have a workaround.
By default, the flag is turned off to be compatible with Docker and to
have a more sane behavior.
Fixes: #14420
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Note that the bud-logfile-with-split-logfile-by-platform test is skipped
on the remote client (see #14544).
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
add an option to configure the driver timeout when creating a volume.
The default is 5 seconds but this value is too small for some custom drivers.
Signed-off-by: cdoern <cdoern@redhat.com>
APIv2 tests are flaky after this morning's merge of #14543.
Symptom:
test-apiv2: Timed out (10s) waiting for service (/dev/tcp/localhost/5564)
journal shows:
registry[7421]: panic: unable to configure authorization (htpasswd):
no access controller registered with name: none
Possible cause:
Mix of REGISTRY_AUTH=none with REGISTRY_AUTH_HTPASSWD_* vars.
https://github.com/distribution/distribution/issues/1168
Solution:
only set _HTPASSWD_* vars when AUTH=htpasswd
Signed-off-by: Ed Santiago <santiago@redhat.com>
this patch included additonal host namespace checks when creating a ctr as well
as fixing of the tests to check /proc/self/ns/net
see #14461
Signed-off-by: cdoern <cdoern@redhat.com>
For some reason commit 5b79cf15a0 moved the container create options
parsing from cmd/podman/common to pkg/api/handlers. However it did not
remove the old code. Unfortunately it moved the code from an outdated
version and did not update it before this commit was merged.
Therefore a couple of regressions were introduced. I manually compared
both versions and found three missing bugfixes.
I fixed the network test again that was changed in bce97a3b5d. We
want bridge as default even as rootless. Sine the test is not run as
rootless in CI the regression was not caught.
Also the no hosts test never worked since it was missing the import
check if the hosts file exists.
I don't think we can check for the volume parsing change since this only
works on windows/wsl.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman container restore --file-locks` does not restore file locks
because this option is not passed to OCI runtime. This patch fixes this
issue.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
When you try to complete a path which exists and it is a file the
completion logic did not check the parent dir for other matching file
names. To fix that we have to check if the current completion is not a
dir and use the parent dir in this case.
See the updated test for an example why this is required.
Also make sure directories are correctly completed, the shell always
adds the "/" as suffix to signal the user that this path is a directory.
In this case we do not want to automatically add a space. When the path
is a regular file we want the space after the suggestion since there is
nothing more to complete.
This better matches the normal default shell completion.
The test were changed to not assume any particular ordering since this
is irrelevant for the shell completion script and there is no guarantee
about the ordering.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Mostly fix a bad design decision I made early on, re: registry.
old: registry starts once, runs to the end
new: registry is brought up on demand, then stopped
Reason: there are times when we need a password-controlled
registry, and times when we need it open.
As long as I'm in here, I've also cleaned up some confusing code
and fixed things so tests can run rootless again.
Signed-off-by: Ed Santiago <santiago@redhat.com>
infra was overriding options that it should be appending rather than resetting.
fix this by appending the given container's spec to the compatible options before marshaling/unmarshaling
resolves#14454
Signed-off-by: cdoern <cdoern@redhat.com>
Using `To(BeTrue()/BeFalse())` provides very bas error messages. It is not
clear to a log reader what went wrong. Using ContainsSubstring() make
the error message much more useful.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a container with a userns is created the network setup is special.
Normally the netns is setup before the oci runtime container is created,
however with a userns the container is created first and then the network
is setup. In the second case we never saved the container state
afterwards. Because of it, podman inspect would not show the network info
and network teardown will not happen.
This worked with local podman because there was a save() call later in the
code path which then also saved the network status. But in the podman API
code path this save never happened thus all containers started via API had
this problem.
Fixes#14465
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Also:
- It fixes a regression in parsing "images" parameter in
ManifestAddV3 handler.
- Refactors 12-imagesMore.at to use start_registry helper.
- Removes some unsafe "exit 1" statements which skip clean up.
Signed-off-by: Vladimir Kochnev <hashtable@yandex.ru>
If a privileged container is running, stops, and the devices on the host
change, such as a USB device is unplugged, then a container would no
longer start. Previously, the devices from the host were only being
added to the container once: when the container was created. Now, this
happens every time the container starts.
I did this by adding a boolean to the container config that indicates
whether to mount all of the devices or not, which can be set via an option.
During spec generation, if the `MountAllDevices` option is set in the
container config, all host devices are added to the container.
Additionally, a couple of functions from `pkg/specgen/generate/config_linux.go`
were moved into `pkg/util/utils_linux.go` as they were needed in
multiple packages.
Closes#13899
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Similar feature was added for named overlay volumes here: https://github.com/containers/podman/pull/12712
Following PR just mimics similar feature for anonymous volumes.
Often users want their anonymous overlayed volumes to be `non-volatile` in nature
that means that same `upper` dir can be re-used by one or more
containers but overall of nature of volumes still have to be overlay
so work done is still on a overlay not on the actual volume.
Following PR adds support for more advanced options i.e custom `workdir`
and `upperdir` for overlayed volumes. So that users can re-use `workdir`
and `upperdir` across new containers as well.
Usage
```console
podman run -it -v /some/path:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh
```
Signed-off-by: Aditya R <arajan@redhat.com>
Setting the build context to a dedicated subdir makes sure that the test does not
flake when running in parallel, as the test is isolated from other tests
that may dump secrets in a higher level context dir.
This should have been done in
https://github.com/containers/podman/pull/13457, as this makes that PR
actually work.
Signed-off-by: Ashley Cui <acui@redhat.com>
The backend should not convert partial lines to full log lines. While
this works for most cases it cannot work when the last line is partial
since it will just be lost. The frontend logic can already display
partial lines correctly. The journald driver also works correctly since
it does not such conversion.
Fixes#14458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Save at most three images and sort them by size. The test started to
flake as _all_ local images were saved which is not neccessary.
Fixes: #14468
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
the function `GetDefaultNamespaceMode` for pods checks if we are sharing each namespace
and if not, returns the default which in the case of a network is slirp.
add a switch case for explicitly checking if the pod's network mode is host
and if so, return specgen.Host for the container
resolves#13763
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
Add shell completion for paths inside the container or image. Currently
podman run IMAGE [TAB] only uses the default shell completion which
suggests paths on the host. This is fine for some cases but often the
user wants a path which only exists in the image/container.
This commits adds support for that. Both podman create/run can now
complete the paths from the image, podman cp ctr:... now completes paths
from the actual container.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It seems API needs json names for OSVersion and OSFeatures in es_model
ref: https://github.com/containers/podman/blob/main/pkg/domain/entities/manifest.go#L42
So at bindings end ensure that we honor es_model naming convention when
we perform marshalling otherwise API will ignore these fields
Signed-off-by: Aditya R <arajan@redhat.com>
Feature of additional build context added here https://github.com/containers/buildah/pull/3978
already exists on `podman` following PR just enables this feature of
`podman-remote` and `podman on macOS` setups.
Signed-off-by: Aditya R <arajan@redhat.com>
podmans remote API does not marshal infra's spec due to
the fact that if it did, all of those options would be available to
the users on the command line. This means we need to manually map "backwards"
some container spec items -> pod spec items before calling PodCreate, this was
one of them that was forgotten
resolves#14233
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
The test calls podman run -d followed by podman logs. There is no
guarantee the the container or conmon has written all its output.
Adding an extra podman wait should fix this.
Do not remove the -d to not print 1000 unnecessary lines in the logs.
Fixes#14362
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a container does not use the default podman netns, for example
--network none or --network ns:/path a restore would fail because the
specgen check validates that c.config.StaticMAC is nil but the
unmarshaller sets it to an empty slice.
While we could make the check use len() > 0 I feel like it is more
common to check with != nil for ip and mac addresses.
Adding omitempty tag makes the json marshal/unmarshal work correctly.
This should not cause any issues.
Fixes#14389
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Hardcoding the interface name is a bad idea. We have no control over the
actual interface name since the user can change it.
The correct thing is to read them from the network status. Since the
contianer can have more than one interface we have to add the RX/TX
values. The other values are currently not used.
For podman 5.0 we should change it so that the API can return the
statistics per interface and the client should sum the TX/RX for the
command output. This is what docker is doing.
Fixes#13824
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When the volume does not exist we should output an error stating so and
not some generic one.
Fixes#14411
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
In docker, the format of no-new-privileges is
"no-new-privileges:true". However, for Podman
all that's required is "no-new-privileges", leading to issues
when attempting to use features desgined for docker in podman.
Adding support for the ":" format to be used along with the "="
format, depedning on which one is entered by the user.
fixes#14133
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Buildah already supports using `--layers` with `--squash` after https://github.com/containers/buildah/pull/3674
if user wants to do so hence podman must honor similar configuration
in `--squash-all` behaviour if user wants to using cache.
PS: We cannot alter behaviour of `podman build --squash` for
docker-compat reasons hence this feature can be easily supported by
`--squash-all`.
Closes: https://github.com/containers/buildah/issues/4011
Signed-off-by: Aditya R <arajan@redhat.com>
Most of these are no longer relevant, just drop the comments.
Most notable change: allow `podman kill` on paused containers.
Works just fine when I test it.
Signed-off-by: Matthew Heon <mheon@redhat.com>
I am not 100% sure if this is actually causing the problem but I was
able to reproduce locally and this change fixed it there. Without the `-n`
option iptables tries to reverse lookup the ips to domain names. This is
extremely slow for unknown reasons. Given the large amount of iptables
entries due parallel test runs it will not succeed in the default 90 sec
timeout.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman auto-update` is now properly exercised in the system tests, so
we can safely remove the outdated TODO.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
I am constantly attempting to add the podname to the last
argument to podman pod create. Allowing this makes it match
podman volume create and podman network create.
It does not match podman container create, since podman container create
arguments specify the arguments to run with the container.
Still need to support the --name option for backwards compatibility.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- Look for and prevent lower-case arg descriptions:
podman cmd [arg]
- Look for and prevent optional-mandatory misordering:
podman cmd [ARG] ARG
- Tighter whitespace checks (and fix podman pod ps)
- simplify a no-longer-necessary mess! #8635 fixed the
horrible "CONTAINER | IMAGE" strings (with spaces),
so there's no longer a need to special-case those.
The one-extra-arg check is now much cleaner.
Minor refactoring.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure that `podman image mount` prints a pretty table unless there
is only argument passed and without a custom format. Fixing a TODO item
brought me to the specific code location and revealed the fart in the
logic.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
I have seen some system tests flake waiting for a container to
transition into a specific running state. My theory is that
the waiting time was not sufficient on nodes under high load.
Hence, increase the waiting time. Also replace the break with
a return to spare some cycles to redundantly compare with the
already checked state.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fix a bug in the resolution of images in the Docker compat API.
When looking up an image by a short name, the name may match
an image that does not live on Docker Hub. The resolved name
should be used for normalization instead of the input name to
make sure that `busybox` can resolve to `registry.com/busybox`
if present in the local storage.
Fixes: #14291
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Create an auto-update event for each invocation, independent if images
and containers are updated or not. Those events will be indicated in
the events already but users will now know why.
Fixes: #14283
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The init binary until now has been bind-mounted to /dev/init which
breaks when bind-mounting to /dev. Instead mount the init to
/run/podman-init. The reasoning for using /run is that it is already
used for other runtime data such as secrets.
Fixes: #14251
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
e2e tests tends to fail when running with multiple nodes because
the same device folder name is used accross all nodes
Signed-off-by: Cosmin Tupangiu <cosmin@redhat.com>
* Remove duplicate or unused types and constants
* Move all documetation-only models and responses into swagger package
* Remove all unecessary names, go-swagger will determine names from
struct declarations
* Use Libpod suffix to differentiate between compat and libpod models
and responses. Taken from swagger:operation declarations.
* Models and responses that start with lowercase are for swagger use
only while uppercase are used "as is" in the code and swagger comments
* Used gofumpt on new code
```release-note
```
Signed-off-by: Jhon Honce <jhonce@redhat.com>
- add test
- fix bug when a character device set in a volume as a block device
is seen as block device in _pkg/specgen/generate/kube/volume.go_.
At this stage the type does not matter much because the devices are
recreated at lower layer but the bug allowed a CharDevice volume to be
passed to lower layer as a BlockDevice.
Signed-off-by: Cosmin Tupangiu <cosmin@redhat.com>
Support running `podman play kube` in systemd by exploiting the
previously added "service containers". During `play kube`, a service
container is started before all the pods and containers, and is stopped
last. The service container communicates its conmon PID via sdnotify.
Add a new systemd template to dispatch such k8s workloads. The argument
of the template is the path to the k8s file. Note that the path must be
escaped for systemd not to bark:
Let's assume we have a `top.yaml` file in the home directory:
```
$ escaped=$(systemd-escape ~/top.yaml)
$ systemctl --user start podman-play-kube@$escaped.service
```
Closes: https://issues.redhat.com/browse/RUN-1287
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Use the host UID and host GID mapping when building the local pause
image for a Pod with a custom mapping. Otherwise, the mappings are off
and the build fails. Propagating the mapping to the build container is
not needed since the pause image ships merely a copied `catatonit` from
the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2083997
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Send the main PID only once. Previously, `(*Container).start()` and
the conmon handler sent them ~simultaneously and went into a race.
I noticed the issue while debugging a WIP PR.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add the notion of a "service container" to play kube. A service
container is started before the pods in play kube and is (reverse)
linked to them. The service container is stopped/removed *after*
all pods it is associated with are stopped/removed.
In other words, a service container tracks the entire life cycle
of a service started via `podman play kube`. This is required to
enable `play kube` in a systemd unit file.
The service container is only used when the `--service-container`
flag is set on the CLI. This flag has been marked as hidden as it
is not meant to be used outside the context of `play kube`. It is
further not supported on the remote client.
The wiring with systemd will be done in a later commit.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
If the RunAsUser, RunAsGroup, SupplementalGroups settings are not
overriden in the container security context, then take the value from
the pod security context.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Commit b58e7e7f11 was not fully rebased before merging and is now
breaking CI because commit 69c479b16e made the underlying error
visible. Using journald inside the container tests is not supported.
Fixes#14162
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
currently tags cause a panic due to an uninitialized map. Initialize the map
and add parsing to make sure we are only tagging with journald
resolves#13356
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Pulling the K8s pause image seems unnecessarily expensive to me. Let's
use the testgitest_v2s2 one which is under our control and weighs only a
couple of KB.
This cut the execution time in less than half on my machine. Since it's
network bound and I am running on fibre, I expect more significant speed
ups in slower networks.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Squash the --quiet test into another one. The test was more complex
than necessary and can easily be squashed into another one to avoid one
more expensive pull.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Once upon a time, the tests actually pulled from Docker Hub. This has
changed with the rate limits, so we can safely remove the redundant
tests to speed up CI.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Rather than assuming a filesystem path, the API service URI is recorded
in the libpod runtime configuration and then reported as requested.
Note: All schemes other than "unix" are hard-coded to report URI exists.
Fixes#12023
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Instead of using the main module we should vendor the test tools in a
different directory. That way we do not add extra dependencies to the
main module which can be problemetic for packages or other users.
This is already done in buildah so this makes us more consitent.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman system reset did not clean up machines fully, leaving some config
files, and breaking machines. Now it removes all machines files fully.
Signed-off-by: Ashley Cui <acui@redhat.com>
The default log driver is not used when using play kube
without --log-driver. The LogDriver function needs to
be called in order to use the default log driver.
fixes#13781
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Polish the push and pull benchmarks. In particular, make sure to not be
network bound during these benchmarks by running a local registry and
pushing a local image that can later on be pulled.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
since the network config is a string map, json.unmarshal does not recognize
the config and spec as the same entity, need to map this option manually
resolves#13713
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
We can vendor the test dependencies such as go-md2man, git-validation
and goimports. This allows us to always install the same version as
specified in go.mod. Also we do not rely on a network connection for
this.
The advantage with this method is that dependabot will also update the
dependencies for us and we do not have to hardcode versions in the
Makefile.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When a container is run in the host network namespace we have to keep
the same resolv.conf content and not use the systemd-resolve detection
logic.
But also make sure we still allow --dns options.
Fixes#14055
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The files /etc/hosts, /etc/hostname and /etc/resolv.conf should always
be owned by the root user in the container. This worked correct for
/etc/hostname and /etc/hosts but not for /etc/resolv.conf.
A container run with --userns keep-id would have the reolv.conf file
owned by the current container user which is wrong.
Consolidate some common code in a new helper function to make the code more
cleaner.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test has been broken since it was added 4 years ago. Instead of
using hardcoded paths we should use tmp files.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Two for this error:
invalid indirect of pod.Spec.DNSConfig.Options[0]
...and one for a gofmt error (spaces).
Signed-off-by: Ed Santiago <santiago@redhat.com>
This is a very late followup to my ginkgo-improving work of 2021.
It has been stuck since December because it requires gomega 1.17,
which we've just enabled.
This commit is simply a copy-paste of a command I saved in
my TODO list many months ago:
sed -i -e 's/Expect(\([^ ]\+\)\.\([a-zA-Z0-9]\+\))\.To(Equal(/Expect(\1).To(HaveField(\"\2\", /' test/e2e/*_test.go
Signed-off-by: Ed Santiago <santiago@redhat.com>
add a new option to completely disable xfs quota usage for a volume.
xfs quota set on a volume, even just for tracking disk usage, can
cause weird errors if the volume is later re-used by a container with
a different quota projid. More specifically, link(2) and rename(2)
might fail with EXDEV if the source file has a projid that is
different from the parent directory.
To prevent such kind of issues, the volume should be created
beforehand with `podman volume create -o o=noquota $ID`
Closes: https://github.com/containers/podman/issues/14049
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
I think we forgot to bump the version in the main branch. It should be
v4.1.0-dev now.
Also set the min api version to 4.0.0 as on the podman 4.0 branch.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We need to use the host network when it is set in the config and
--network was not used.
This regression was added in 3e9af2029f.
Fixes#14015
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We should not exclude contianers by name. If a users has a container
with the name "inf" it is currently skipped. This is wrong. The k8s yaml
does not contain infra containers so we do not have to skip them.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Changes as of 2022-04-21:
- apply-podman-deltas: minor cleanup
- buildah-tests.diff: deal with:
. buildah #3894 (the registry one), which affected helpers.bash in
a way that resulted in conflicts here; and
. buildah #3917 (etchosts), which caused offset-only diffs
with no conflicts
- Reevaluate the bud skip list, and reenable some tests that
seems to be passing now under podman:
. bud with specified context ...
. two tests that require a local registry (which buildah now runs)
. bud with --cgroup-parent
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add more benchmarks for the most common and performance-critical image
commands. Benchmarks for `podman build` should go into a separate
section.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
[skip ci]
While chasing a flake, I discovered that our alpine_nginx
image is broken: it returns 404 on all requests. We never
caught this because--surprise!--curl exits 0 even when
server returns 4xx/5xx status.
Let's be strict: add -f (--fail) option to all invocations
of curl.
And, although I couldn't identify the root cause of the
flake (in "run two containers with the same IP" test),
I can at least fix the broken wait-for-nginx loop, bump
up the number of retries, and improve diagnostics on
failure. And add a strict error-message check.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This reverts commit cc3790f332.
We can't change rootful to rootfull because `rootful` is written into the machine config. Changing this will break json unmarshalling, which will break existing machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
Do not use a list of statuses outside of libpod to validate container
statuses. Removing status was never added to the list.
Fixes: https://github.com/containers/podman/issues/13986
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Starting the podman service in debug-mode causes aardvark to run in
debug mode. This does unexpected things with file-descriptors leading
to a test-hang. Thanks to @Luap99 for the fix.
Signed-off-by: Chris Evich <cevich@redhat.com>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Because /etc/hosts is shared for all containers with a shared network
namespace you should not be able to add hosts from a joined container.
Only the primary netns container can set the hosts.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we connect or disconnect from a network we also have to update
/etc/hosts to ensure we only have valid entries in there.
This also fixes problems with docker-compose since this makes use of
network connect/disconnect.
Fixes#12533
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we lookup the hostname for a given container we have to check if
the container is joined to another utsns and use this hostname then
instead.
This fixes a problem where the `hostname` command would use the correct
name but /etc/hostname would contain a different name.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the new logic from c/common to create the hosts file. This will help
to better allign the hosts files between buildah and podman.
Also this fixes several bugs:
- remove host entries when container is stopped and has a netNsCtr
- add entries for containers in a pod
- do not duplicate entries in the hosts file
- use the correct slirp ip when an userns is used
Features:
- configure host.containers.internal entry in containers.conf
- configure base hosts file in containers.conf
Fixes#12003Fixes#13224
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Following commit ensures that csv escaping is supported while using
inline `--mount=type=......` flag with `podman run` by using
`encoding/csv` to parse options instead of performing a `split.String(`
by `comma`.
Closes: https://github.com/containers/podman/issues/13922
Signed-off-by: Aditya R <arajan@redhat.com>
When run on an F36 host using netavark/aardvark-dns, for whatever
underlying reason most checkpoint/restore tests are emitting an error
similar to:
`criu: Symbol `__rseq_offset' has different size in shared object,
consider re-linking`
This extraneous output is causing the basic checkpoint system test to
fail. Since, all other testing of checkpoint/restore feature is
passing (also with the extraneous message) loosen the system test
sensitivity to match.
Signed-off-by: Chris Evich <cevich@redhat.com>
We are inconsistent on the name, we should stick with rootfull.
[NO NEW TESTS NEEDED] Existing tests should handle this and no tests for
machines exists yet.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
From a security point of view, it would be nice to be able to map a
rootless usernamespace that does not use your own UID within the
container.
This would add protection against a hostile process escapping the
container and reading content in your homedir.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
It seems this breaks older version of `podman-remote` users hence it
looks like this patch would be a better candidate for podman `5.0`
Problem
* Client with `4.0` cannot interact with a server of `4.1`
Plan this patch for podman `5.0`
This reverts commit 0cebd158b6.
Signed-off-by: Aditya R <arajan@redhat.com>
On F36 / podman 4, at the time of this commit there is no
`/etc/containers/storage.conf` installed by default. Since the
test volume-mounts this file into the container, it was failing. Fix
this by using a conditional volume-mount based on the file existing (or
not).
Signed-off-by: Chris Evich <cevich@redhat.com>
When this option was added to the e2e tests, there was no CI Automation
support for running remote tests w/ netavark. When added, many
e2e test errors/failures are generated due to this option not being
valid for the remote client. Fix this in the tests by conditionally
adding the option if the test is running the remote client.
Signed-off-by: Chris Evich <cevich@redhat.com>
Problem: the system test 'is()' checker was poorly thought out.
For example, there is no way to check for inequality or for
absence of a substring.
Solution, step 1: introduce new assert(), copied almost verbatim
from buildah, where it has been successful in addressing the
gaps in is().
The logical next step is to search the tests for 'die' and
for 'run', looking for negative assertions which we can
replace with assert(). There were a lot, and in the process
I found a number of ugly bugs in the tests themselves. I've
taken the liberty of fixing these.
Important note: at this time we have both assert() and is().
Replacing all instances of is() would be impossible to review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The patch introduces the following test cases:
1. An attempt to checkpoint a container that does not exist should fail.
2. Checkpoint of a running container with --create-image should create a
checkpoint image.
3. A single checkpoint image can be used to restore multiple containers,
each with a different name.
4. Restoring multiple containers from checkpoint images with a single
restore command.
Signed-off-by: Radostin Stoyanov <radostin@redhat.com>
Add a proof of concept for benchmarking Podman. The benchmarks are
implemented by means of the end-to-end test suite but hidden behind
a `benchmarks` build tag. Running `make localbenchmarks` will run
`test/e2e` with the specific build tag and set ginkgo's "focus" to
the specific "Podman Benchmark Suite" to only run this spec and skip
all others.
ginkgo will print a report before terminating listing the CPU and memory
stats for each benchmark. New benchmarks can easily be added via the
`newBenchmark` function that also supports adding an `init()` function
to each benchmark which allows for performing certain setups for the
specific benchmark. For instance, benchmarking `podman start` requires
creating a container beforehand.
Podman may be called more than once in the main function of a benchmark
but note that the displayed memory consumption is then a sum of all
Podman invocations. The memory consumption is collected via
`/usr/bin/time`.
A benchmark's report is split into CPU and memory as displayed below:
```
[CPU] podman images:
Fastest Time: 0.146s
Slowest Time: 0.187s
Average Time: 0.180s ± 0.015s
[MEM] podman images:
Smallest: 41892.0KB
Largest: 42792.0KB
Average: 42380.7KB ± 286.4KB
```
Note that the benchmarks are not wired into the CI yet. They are meant
as a proof of concept. More benchmarks and the plumbing into CI will
happen in a later change.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
in specgen, CLI path uses the given memory limit to define the swap value (if not already specified)
add a route to this piece of code from within the api handlers
resolves#13145
Signed-off-by: cdoern <cdoern@redhat.com>
`DefineCreateFlags` was excluding clone from using the memory-swappiness flag leading the value to be zero
when our deafult is -1. Rearrange the if/else to give clone these memory related options
resolves#13856
Signed-off-by: cdoern <cdoern@redhat.com>
It allows to customize the entry that is written to the `/etc/passwd`
file when --passwd is used.
Closes: https://github.com/containers/podman/issues/13185
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This reverts commit e133a06d2f.
@nalind found a proper fix in c/storage [1] to address the performance
issue. So we really don't need the flag anymore. Note the flag has
never made it into any release.
[1] d76b3606fc
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add new functions to logfile.go for rotating and truncating
the events log file once the log file and its contents
exceed the maximum size limit while keeping 50% of the
log file's content
Also add tests to verify log rotation and truncation
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Current error messages are really awful, and cause great
suffering every time someone adds a new subcommand. Let's
see if these are better.
Signed-off-by: Ed Santiago <santiago@redhat.com>
--tail=1 is not working f you restart a container with journald logging.
We see the exit status and then call into the logging a second time
causing all of the logs to print.
Removing the tail log on exited seems to fix the problem.
Fixes: https://github.com/containers/podman/issues/13098
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For better docker compatibility we should use the bridge network mode as
default for rootless. This was already done previously but commit
535818414c introduced this regression in v4.0.
Since the apiv2 test are only run rootful we cannot catch this problem
in CI.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bad code got committed by accident: test description on run_podman
line, not test line.
Did not seem to affect tests, but fix it anyway.
Signed-off-by: Ed Santiago <santiago@redhat.com>
`--mount` should allow setting driver specific options using
`volume-opt` when `type=volume` is set.
This ensures parity with docker's `volume-opt`.
Signed-off-by: Aditya R <arajan@redhat.com>
The API endpoints should properly honour the `no_hosts=true` setting in
containers.conf.
Fixes#13719
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a new flag to set the ipam-driver. Also adds a new ipam driver none
mode which only creates interfaces but does not assign addresses.
Fixes#13521
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Convert container entrypoint from string to an array inorder to make
sure there is parity between `podman inspect` and `docker inspect`
Signed-off-by: Aditya R <arajan@redhat.com>
Add a --size option to podman images to allow for disabling computing
the size of listed images. If listing images is critical to
performance, user may chose to turn off size computation to speed things
up.
Context: #13755
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This fixes#13756.
All the mechanics to create anonymous volumes is already present, but
there's still a validation preventing that path from being taken. We
remove the validation, which allows the volume to be created
successfully.
Signed-off-by: Andrew Aylett <andrew@aylett.co.uk>
--cap-add is useful when running a privileged container with UID != 0,
so that individual capabilities can be added to the container process.
Closes: https://github.com/containers/podman/issues/13449
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Ensure a directory added to .containerignore on client is not included
in tar sent to remote podman API service
* Clean up podman invocations to not include duplicate --remote and
--url flags
* Use pkill vs. pgrep when cleaning up podman API service in tests
* Add exit code when logging error when testing
Closes#13535
Signed-off-by: Jhon Honce <jhonce@redhat.com>
When you run podman-remote unsahre for example you currently get:
Error: unrecognized command `podman-remote unshare`
This is because we do not add the command to the cobra tree when we run
in remote mode. However this is a bad user experience since it is not
clear that the command is only supported for local podman. Users are
left wondering why this does not work and could think the documentation
is wrong.
To fix it we add a clear error message:
Error: cannot use command "podman-remote unshare" with the remote podman client
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman play kube` creates a new volume for configmap, if same configmap
is applied again volume can be re-used, there is no need to remove and
re-create the volume again
Signed-off-by: Aditya R <arajan@redhat.com>
Since netavark does not support dhcp yet we have to create a macvlan
network with a static subnet. Since we do not use the network to run
containers the actual subnet does not matter.
Also stop hard coding the network id. Unlike the cni backend the
netavark backend creates random ids that are not predictable.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
- removed: v1.9.0, v2.0.6
+ added: v3.4.0
(Cannot add v4 because there's no such image on quay. As soon
as one appears, we should add it.)
Add a workaround for a UTS namespace conflict new in v3.4
Signed-off-by: Ed Santiago <santiago@redhat.com>
The slirp4netns port forwarder was not updated to make use of the new
port format. This results in a problem when port ranges are used since
it does not read the range field from the port.
Update the logic to iterate through all ports with the range and
protocols. Also added a system test for port ranges with slirp4netns,
rootlesskit and the bridge network mode.
Fixes#13643
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
the infra Inherit function was not properly passing pod volume information to new containers
alter the inherit function and struct to use the new `ConfigToSpec` function used in clone
pick and choose the proper entities from a temp spec and validate them on the spegen side rather
than passing directly to a config
resolves#13548
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
With podman4 we support netavark, however old versions will still use
cni. Since netavark and cni can conflict we should not mix them.
Remove the network setup from the inital podman command and create the
directories manually to prevent such conflicts.
Also the update to 4.0 changes the network db structure. While it is
compatible from 3.X to 4.0 it will fail the other way around. In this
test it will happen because the cleanup process still uses the old
podman while the network connect/disconnect test already changed the db
format. Therefore the cleanup process cannot see any networks and will
not tear it down. The following start will fail because the ip address
is already assigned.
Fixes#13679
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Following commit ensures that podman generates a valid event on `podman
container rename` where event specifies that it is a rename event and
container name swtichted to the latest name.
Signed-off-by: Aditya R <arajan@redhat.com>
WalkDir should be faster the Walk, since we often do
not need to stat files.
[NO NEW TESTS NEEDED] Existing tests should find errors.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When podman gets an error it prints out "Error: " before
printing the error string. If the error message starts with
error, we end up with
Error: error ...
This PR Removes all of these stutters.
logrus.Error() also prints out that this is an error, so no need for the
error stutter.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
systemd expects the container_uuid environment variable be set
when it is running in a container.
Fixes: https://github.com/containers/podman/issues/13187
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The kernel never sets the inheritable capabilities for a process, they
are only set by userspace. Emulate the same behavior.
Closes: CVE-2022-27649
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Allows users to set `--os` , `--arch` and `--variant` of the image
created from the custom import.
Following is useful when user is already aware of the values which are
correct for their generated rootfs
Signed-off-by: Aditya R <arajan@redhat.com>
podman build fails on remote build when using a relative context directory.
This is because the context dir was not being added to the tar, so when remote
the compat build function would not be able to stat the contextDir.
resolves#13293
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Still an unknown number remains but I am running out of patience.
Adding dots is not the best use of my time.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure we're waiting for the ls container to finish to prevent
potential flakes or future regressions.
Spotted while enabling a linter.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Containers started with `--no-healthcheck` are configured to contain no
healthcheck and test configured as `NONE`. Podman shows wrong status as
such use cases.
Following commit fixes the faulty behavior of stauts field for
containers started with `--no-healthcheck`
Signed-off-by: Aditya R <arajan@redhat.com>
OpenShift Merge Robot
Piotr Resztak
Valentin Rothberg
Miloslav Trmač
Daniel J Walsh
Paul Holzinger
Ed Santiago
Mikhail Khachayants
Boaz Shuster
Andrei Natanael Cosma
Toshiki Sonoda
Jake Correnti
Radostin Stoyanov
cdoern
Matthew Heon
Ashley Cui
Dan Čermák
😎Mostafa Emami
Chris Evich
Charlie Doern
Giuseppe Scrivano
Kir Kolyshkin
Eng Zer Jun
Harald Albrecht
dependabot[bot]
Tsubasa Watanabe
François Poirotte
Matthew Heon
tomsweeneyredhat
Urvashi Mohnani
Jason Ertel
Josh Patterson
Jason Ertel
Alessandro Rossi
Aditya R
Niall Crowe
Vladimir Kochnev
Lokesh Mandvekar
Nalin Dahyabhai
Naoto Kobayashi
unknowndevQwQ
openshift-ci[bot]
Karthik Elango
Romain Geissler
Erik Sjölund
Sascha Grunert
Jakub Guzik
Zeyad Yasser
chesedo
Carlo Lobrano
Hironori Shiina
Cosmin Tupangiu
Alexander Scheel
Jhon Honce
aonoa
Andrew Aylett
John Matthews
gcalin
jason
Giuseppe Scrivano